Medium power transistor (32V, 2A) 2SD1758 / 2SD1862 Dimensions (Units : mm) 2SD1862 6.50.2 5.1+0.2 -0.1 2.50.2 6.80.2 4.40.2 9.50.5 1.5 0.9 0.50.1 0.650.1 0.75 2.3+0.2 -0.1 2.5 Structure Epitaxial planar type NPN silicon transistor C0.5 0.9 5.5+0.3 -0.1 1.50.3 2SD1758 1.0 Features 1) Low VCE(sat). VCE(sat) = 0.5V (Typ.) (IC/IB = 2A / 0.2A) 2) Complements the 2SB1182 / 2SB1240 0.65Max. 2.30.2 0.550.1 1.00.2 2.30.2 0.50.1 (1) (1) (2) (3) (2) 14.50.5 0.9 (3) 2.54 2.54 1.05 ROHM : CPT3 EIAJ : SC-63 (1) Base (2) Collector (3) Emitter ROHM : ATV 0.450.1 (1) Emitter (2) Collector (3) Base Absolute maximum ratings (Ta=25C) Symbol Limits Unit Collector-base voltage Parameter VCBO 40 V Collector-emitter voltage VCEO 32 V Emitter-base voltage VEBO 5 V 2 A (DC) Collector current IC Collector power dissipation PC 2SD1758 2SD1862 2.5 A (Pulse) 1 10 W (TC=25C) 2 W 1 Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C 1 Single pulse, PW=20ms 2 Printed circuit board: 1.7 mm thick, collector copper plating 1 cm2 or lager. Electrical characteristics (Ta=25C) Parameter Symbol Min. Typ. Max. Collector-base breakdown voltage BVCBO 40 - - V IC=50A Collector-emitter breakdown voltage BVCEO 32 - - V IC=1mA Emitter-base breakdown voltage IE=50A Unit Conditions BVEBO 5 - - V Collector cutoff current ICBO - - 1 A VCB=20V Emitter cutoff current IEBO - - 1 A VEB=4V DC current transfer ratio hFE 120 - 390 - VCE=3V, IC=0.5A VCE(sat) - 0.5 0.8 V IC/IB=2A/0.2A Transition frequency fT - 100 - MHz VCE=5V, IE=-50mA, f=100MHz Output capacitance Cob - 30 - pF Collector-emitter saturation voltage VCB=10V, IE=0A, f=1MHz Measured using pulse current. www.rohm.com c 2010 ROHM Co., Ltd. All rights reserved. 1/2 2010.04 - Rev.C 2SD1758 / 2SD1862 Data Sheet Packaging specifications and hFE Package Taping Code Type hFE 2SD1758 QR 2SD1862 QR Basic ordering unit (pieces) TL TV2 2500 2500 - - hFE values are classified as follows : Item Q R hFE 120 to 270 180 to 390 Electrical characteristic curves 200 100 50 20 10 5 500 2.4mA 0.4 2.1mA 1.8mA 0.3 1.5mA 1.2mA 0.2 0.9mA 0.6mA 0.1 200 VCE=3V 1V 100 50 0.3mA 2 IB=0A 0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 100 IC/IB=50 50 20 20 5 10 10 20 BASE SATURATION VOLTAGE : VBE(sat) (V) 200 20 2.0 IC/IB=10 0.5 0.2 0.1 10 20 50 100 200 Fig.6 Transition frequency vs. emitter current 3 Fig.7 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage www.rohm.com c 2010 ROHM Co., Ltd. All rights reserved. COLLECTOR CURRENT : IC (A) 1 PW=100ms 0.5 0.2 0.1 0.05 TC=25C Single 0.02 nonrepetitive pulse 0.01 0.1 0.2 0.5 1 2 5 10 20 50 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.8 Safe operating area (2SD1758) 2/2 1 Ic Max Ic Max Pulse 0.5 s 20 2 2 s 10 -50 -100-200 -500 -1A m 5 -5 -10 -20 m 2 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) -2 0 =1 20 1 50 PW Cob 0.5 100 DC 100 50 200 00 =1 PW Cib Ta=25C VCE=5V EMITTER CURRENT : IE (mA) Fig.5 Collector-emitter saturation voltage vs. collector current 200 500 1A 2A 500 20 -1 500 1A 2A 5 500 50 100 200 1000 Ta=25C 5 1000 10 20 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Ta=25C f=1MHz IE=0A IC=0A 5 Fig.3 DC current gain vs. collector current 1 50 100 200 500 1A 2A Fig.4 Collector-emitter saturation voltage vs. collector current COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) 1.6 2 COLLECTOR CURRENT : IC (mA) 10 1.2 Fig.2 Grounded emitter output characteristics Fig.1 Grounded emitter propagation characteristics 500 0.8 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) Ta=25C 0.4 TRANSITION FREQUENCY : fT (MHz) 1 0 COLLECTOR SATURATION VOLTAGE : VCE(sat) (mV) Ta=25C 2.7mA DC CURRENT GAIN : hFE 500 Ta=25C 3.0mA COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (mA) 1000 0.5 COLLECTOR CURRENT : IC (A) Ta=25C VCE=3V 2000 0.2 0.1 0.05 Ta=25C Single nonrepetitive pulse 0.2 0.5 1 2 5 10 20 50 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.9 Safe operating area (2SD1862) 2010.04 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A