1N4728A - 1N4761A 1.0W ZENER DIODE Please click here to visit our online spice models database. Features * * * * 1.0 Watt Power Dissipation 3.3V - 75V Nominal Zener Voltage Standard VZ Tolerance is 5% Lead Free Finish, RoHS Compliant (Note 2) Mechanical Data * * * * * * Case: DO-41 Case Material: Glass. UL Flammability Classification Rating 94V-0 Terminals: Finish Sn96.5Ag3.5. Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Weight: 0.35 grams (approximate) DO-41 Glass Dim Min A 26.0 Max B 4.10 C 0.86 D 2.60 All Dimensions in mm Maximum Ratings @TA = 25C unless otherwise specified Characteristic Zener Current (see Table page 2) Power Dissipation Derate Above 50C (Note 1) Thermal Resistance - Junction to Ambient Air Forward Voltage @ IF = 200 mA Symbol IZ Operating and Storage Temperature Range Notes: RJA VF Value Pd / VZ 1.0 6.67 175 1.2 Unit mA W mW/C C/W V Tj, TSTG -65 to + 175 C Pd 1. Valid provided that leads are kept at TL @ 50C with lead length = 9.5mm (3/8") from case. 2. EC Directive 2002/95/EC (RHS) revision 13.2.2003. Glass and high temperature solder exemptions applied where applicable, see EU Directive Annex Notes 5 and 7. DS18007 Rev. 18 - 2 1 of 3 www.diodes.com 1N4728A - 1N4761A (c) Diodes Incorporated Electrical Characteristics Type Number @TA = 25C unless otherwise specified Nominal Zener Voltage (Note 3) Test Current Maximum Zener Impedance (Note 4) VZ @ IZT IZT ZZT @ IZT Maximum Reverse Leakage Current ZZK @ IZK IZK IR Max Surge Current 8.3ms @ VR IZS Temperature Coefficient @ IZT (V) (mA) () () (mA) (A) (V) (mA) %/C 1N4728A 3.3 76 10 400 1.0 100 1.0 1380 -0.08 to -0.05 1N4729A 3.6 69 10 400 1.0 100 1.0 1260 -0.08 to -0.05 1N4730A 3.9 64 9.0 400 1.0 50 1.0 1190 -0.07 to -0.02 1N4731A 4.3 58 9.0 400 1.0 10 1.0 1070 -0.07 to -0.01 1N4732A 4.7 53 8.0 500 1.0 10 1.0 970 -0.03 to +0.04 1N4733A 5.1 49 7.0 550 1.0 10 1.0 890 -0.01 to +0.04 1N4734A 5.6 45 5.0 600 1.0 10 2.0 810 0 to +0.045 1N4735A 6.2 41 2.0 700 1.0 10 3.0 730 +0.01 to +0.055 1N4736A 6.8 37 3.5 700 1.0 10 4.0 660 +0.015 to +0.06 1N4737A 7.5 34 4.0 700 0.5 10 5.0 605 +0.02 to +0.065 1N4738A 8.2 31 4.5 700 0.5 10 6.0 550 0.03 to 0.07 1N4739A 9.1 28 5.0 700 0.5 10 7.0 500 0.035 to 0.075 1N4740A 10 25 7.0 700 0.25 10 7.6 454 0.04 to 0.08 1N4741A 11 23 8.0 700 0.25 5.0 8.4 414 0.045 to 0.08 1N4742A 12 21 9.0 700 0.25 5.0 9.1 380 0.045 to 0.085 1N4743A 13 19 10 700 0.25 5.0 9.9 344 0.05 to 0.085 1N4744A 15 17 14 700 0.25 5.0 11.4 304 0.055 to 0.09 1N4745A 16 15.5 16 700 0.25 5.0 12.2 285 0.055 to 0.09 1N4746A 18 14 20 750 0.25 5.0 13.7 250 0.06 to 0.09 1N4747A 20 12.5 22 750 0.25 5.0 15.2 225 0.06 to 0.09 1N4748A 22 11.5 23 750 0.25 5.0 16.7 205 0.06 to 0.095 1N4749A 24 10.5 25 750 0.25 5.0 18.2 190 0.06 to 0.095 1N4750A 27 9.5 35 750 0.25 5.0 20.6 170 0.06 to 0.095 1N4751A 30 8.5 40 1000 0.25 5.0 22.8 150 0.06 to 0.095 1N4752A 33 7.5 45 1000 0.25 5.0 25.1 135 0.06 to 0.095 1N4753A 36 7.0 50 1000 0.25 5.0 27.4 125 0.06 to 0.095 1N4754A 39 6.5 60 1000 0.25 5.0 29.7 115 0.06 to 0.095 1N4755A 43 6.0 70 1500 0.25 5.0 32.7 110 0.06 to 0.095 1N4756A 47 5.5 80 1500 0.25 5.0 35.8 95 0.06 to 0.095 1N4757A 51 5.0 95 1500 0.25 5.0 38.8 90 0.06 to 0.095 1N4758A 56 4.5 110 2000 0.25 5.0 42.6 80 0.06 to 0.095 1N4759A 62 4.0 125 2000 0.25 5.0 47.1 70 0.06 to 0.095 1N4760A 68 3.7 150 2000 0.25 5.0 51.7 65 0.06 to 0.095 1N4761A 75 3.3 175 2000 0.25 5.0 56.0 60 0.06 to 0.095 Notes: 3. Measured under thermal equilibrium and dc (IZT) test conditions. 4. The Zener impedance is derived from the 60 Hz ac voltage which results when an ac current having an rms value equal to 10% of the Zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units. DS18007 Rev. 18 - 2 2 of 3 www.diodes.com 1N4728A - 1N4761A (c) Diodes Incorporated 250 0.8 200 RJA, THERMAL RESISTANCE JUNCTION TO AMBIENT (C/W) PD, TOTAL POWER DISSIPATION (W) 1.0 0.6 0.4 0.2 0 100 50 0 0 5 15 25 30 10 20 l, Lead Length (mm) Fig. 2 Typical Thermal Resistance vs. Lead Length 0 40 80 120 160 200 TA, AMBIENT TEMPERATURE (C) Fig. 1 Power Dissipation vs. Ambient Temperature 1,000 CT, TOTAL CAPACITANCE (pF) 150 1,000 IZ = 1mA 2mA 100 100 5mA 10mA 20mA 10 10 1 0 1 10 20 30 40 50 60 VZ, ZENER VOLTAGE (V) Fig. 3 Typical Total Capacitance vs. Zener Voltage 1 10 100 VZ, ZENER VOLTAGE (V) Fig. 4 Typical Zener Impedance vs. Zener Voltage Ordering Information (Notes 5 & 6) Device (Type Number)-A* (Type Number)-T* Notes: Packaging DO-41 Glass DO-41 Glass Shipping 5K/Ammo Pack 5K/Tape & Reel 5. *Add "-A" or "-T" to the appropriate type number in Electrical Characteristics Table. Example: 6.2V Zener = 1N4735A-A for ammo pack. 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS18007 Rev. 18 - 2 3 of 3 www.diodes.com 1N4728A - 1N4761A (c) Diodes Incorporated