CHEMTRONICS(R) TDS # 2400 Technical Data Sheet Tun-O-Wash(R) Cleaner PRODUCT DESCRIPTION Tun-O-Wash(R) Cleaner is a fast drying, one step precision cleaning and degreasing agent safe for most plastics. Engineered with very low surface tension, this high pressure aerosol formulation flushes areas clean and evaporates instantly leaving no residue. Removes encrusted dirt, grease and other contaminants Penetrates hard to reach areas Evaporates quickly Leaves no residues Low odor formulation Noncorrosive Contains no CFCs or HCFCs Contains no 1,1,1 Trichloroethane TYPICAL APPLICATIONS Tun-O-Wash(R) Cleaner cleans and degreases: Contacts Label Residue Light Fluxes Potentiometers Printed Circuit Boards Selector Switches Tape Drives Tuners Volume and Tone Controls TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES Boiling Point Vapor Density (air=1) Solubility in Water Specific Gravity (water = 1@77F) 141F Initial >1 20% 0.70 Evaporation Rate >1 (butyl acetate=1) Appearance Clear, Colorless Liquid Odor Surface Tension (dynes/cm @21.6C) Flash Point (TCC) Flammable Kauri-Butanol (KB) Number Shelflife Mild 17.3 -20.0F (-29C) 50 5 years RoHS/WEEE Status COMPATIBILITY Cleaner is generally Tun-O-Wash(R) compatible with most materials used in the electronics industry. As with any cleaning agent, compatibility must be determined on a non-critical area prior to use. AVAILABILITY Material Compatibility ABS Buna-N EPDM Graphite HDPE KynarTM LDPE LexanTM Neoprene Noryl(R) Nylon 66TM Cross-Linked PE Polypropylene Polystyrene PVC Silicone Rubber TeflonTM VitonTM Good Good Poor Excellent Excellent Fair Fair Fair Fair Good Excellent Excellent Good Non-Compatible Good Non-Compatible Excellent Excellent Performance Product Required for Water Soluble Oil Removal (mg solvent / 1 mg oil) Tun-O-Wash Cleaner Conventional CFC Cleaner 33 94 Water Soluble Oil Removal Rate (mg / in2 sec.) Tun-O-Wash Cleaner Conventional CFC Cleaner 11 ES2400 12.5 oz. Aerosol TECHNICAL & APPLICATION ASSISTANCE Chemtronics(R) provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. ENVIRONMENTAL IMPACT DATA ENVIRONMENTAL IMPACT DATA CFC HCFC CL Solv. 0.0% 0.0% 0.0% VOC HFC ODP 95.7% 0.0% 0.0 CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown are the content by weight. Ozone depletion potential (ODP) is determined in accordance with the Montreal Protocol and U.S. Clean Air Act of 1990. The ODP of this product is 0.0. It is the sum of the ODP of the substances that may contribute to the depletion of stratospheric ozone, based upon the weight of each substance in the product's formulation. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS(R) does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. 5 MANUFACTURED BY: USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Spray 4-6 inches from surface to clean. Wash parts from top to bottom, allowing the liquid to flush away dirt and dissolved grease. For precise application use attached extension tube. Product is Extremely Flammable - Do not use near sources of ignition and energized equipment. ITW CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888 REV. G (06/06) DISTRIBUTED BY: