PRODUCT DESCRIPTION
Tun-O-Wash® Cleaner is a fast drying, one
step precision cleaning and degreasing agent
safe for most plastics. Engineered with very
low surface tension, this high pressure
aerosol formulation flushes areas clean and
evaporates instantly leaving no residue.
Removes encrusted dirt, grease and other
contaminants
Penetrates hard to reach areas
Evaporates quickly
Leaves no residues
Low odor formulation
Noncorrosive
Contains no CFCs or HCFCs
Contains no 1,1,1 Trichloroethane
TYPICAL APPLICATIONS
Tun-O-Wash® Cleaner cleans and degreases:
Contacts
Label Residue
Light Fluxes
Potentiometers
Printed Circuit Boards
Selector Switches
Tape Drives
Tuners
Volume and Tone Controls
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point 141°F Initial
Vapor Density (air=1) >1
Solubility in Water 20%
Specific Gravity
(water = 1@77°F) 0.70
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless Liquid
Odor Mild
Surface Tension
(dynes/cm @21.6°C) 17.3
Flash Point (TCC)
Flammable -20.0°F
(-29°C)
Kauri-Butanol
(KB) Number 50
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Tun-O-Wash® Cleaner is generally
compatible with most materials used in the
electronics industry. As with any cleaning
agent, compatibility must be determined on
a non-critical area prior to use.
TDS # 2400
CHEMTRONICS®
Technical Data Sheet
Tun-O-Wash® Cleaner
Material Compatibility
ABS Good
Buna-N Good
EPDM Poor
Graphite Excellent
HDPE Excellent
Kynar™ Fair
LDPE Fair
Lexan™ Fair
Neoprene Fair
Noryl® Good
Nylon 66™ Excellent
Cross-Linked PE Excellent
Polypropylene Good
Polystyrene Non-Compatible
PVC Good
Silicone Rubber Non-Compatible
Teflon™ Excellent
Viton™ Excellent
Performance
Product Required for Water Soluble Oil Removal
(mg solvent / 1 mg oil)
Tun-O-Wash Cleaner 33
Conventional CFC
Cleaner 94
Water Soluble Oil Removal Rate (mg / in∧2 sec.)
Tun-O-Wash Cleaner 11
Conventional CFC
Cleaner 5
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean. Wash
parts from top to bottom, allowing the liquid to
flush away dirt and dissolved grease. For
precise application use attached extension tube.
Product is Extremely Flammable - Do not use
near sources of ignition and energized
equipment.
AVAILABILITY
ES2400 12.5 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics® provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 95.7%
HCFC 0.0% HFC 0.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with the
Montreal Protocol and U.S. Clean Air Act of 1990. The
ODP of this product is 0.0. It is the sum of the ODP of
the substances that may contribute to the depletion of
stratospheric ozone, based upon the weight of each
substance in the product’s formulation.
NOTE: This information is believed to be accurate. It
is intended for professional end users having the skills to
evaluate and use the data properly. CHEMTRONICS®
does not guarantee the accuracy of the data and assumes
no liability in connection with damages incurred while
using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. G (06/06)
DISTRIBUTED BY:
