N Connectors General Description Delta type N connectors are medium size, 50 impedance connectors with 5 8 "-24 threaded coupling. They are best suited for use with cables in the range of .350" to .450" diameter, but are available for other cables with diameters from .100" to over 1". Many of our N connectors are available as MIL-PRF-39012 QPL versions, and adapters as MIL-PRF-55339 versions. These types are listed starting on page 190. Our extensive line of type N receptacles includes configurations for virtually any packaging requirement, and we can supply any adapter or accessory you need to complete your system design. Adapters between type N and other series are shown starting on page 176. As with our other connector series, Delta's customer-driven design results in N series connectors with practical and unique features that make your design and assembly process easier. Some of these include: * Heli-Grip cable connectors for fast, reliable assembly to flexible cable without special tooling. * One-Step cable connectors for quick, accurate assembly to semi-rigid cable. * PressMount receptacles (page 85) mount securely in a single round hole, saving space on your components and reducing your housing fabrication costs. * Panel receptacles with flange sizes to match the same hole pattern as standard SMA or BNC/TNC connectors, letting you drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed. * 70 impedance N connectors (see page 89) for matched-impedance applications. Our N series product line is still growing, so please call if you don't see what you need. N Configurations Straight Cable Plugs ..................................................... 2 Right Angle Cable Plugs ............................................. 5 Tee Cable Plugs .............................................................. 6 Straight Cable Jacks ...................................................... 6 Bulkhead Cable Jacks ................................................... 8 Tee Bulkhead Cable Jacks........................................... 9 Panel Cable Jacks .......................................................... 11 Panel Jack Receptacles (square flange) ................ 12 Panel Jack Receptacles (round flange) ..................12 Dummy Receptacles ...................................................16 Right Angle Panel Jack Receptacles .....................16 Panel Plug Receptacles..............................................17 Bulkhead Jack Receptacles ......................................18 Stripline Receptacles ..................................................18 PressMount Receptacles............................................19 Resistive Terminations ................................................20 Dust Caps ........................................................................ 20 In-Series Adapters ........................................................ 21 N Specifications* Electrical: Nominal Impedance: 50 ohms. Frequency Range: DC-11 GHz. Voltage Rating: 1,000 volts RMS. Dielectric Withstanding Voltage: 2,500 volts RMS. Insulation Resistance: 5,000 megohms. Contact Plating: Silver per ASTM B700, or Gold per MIL-DTL-45204. Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50. Other Metal Parts: Brass per ASTM B16, plated: Silver per ASTM B700, or Nickel per AMS-QQ-N-290. Materials/Finishes: Insulators: Teflon per ASTM D1710. Male Contacts: Brass per ASTM B16. Female Contacts: Beryllium Copper per ASTM B196. All other specifications are in accordance with the latest issues of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL specifications, and interfaces are in accordance with MIL-STD-348. Plug Interface** .398/.412 .210/.230 .827 dia. max. .119 .124 dia. .625-24 UNEF-2B .177 min. full thread Jack Interface** Reference Plane .356/.362 .625-24 UNEF-2A .016/.060 .330 dia. max. .158 .168 .630 dia. min. .336 .344 COMPENSATING RING OPTIONAL Reference Plane .187/.207 .316 .320 .047/.077 .172/.202 SLOTS REQUIRED; DESIGN OPTIONAL. .627 dia. max. .047 .077 *These specifications are typical and may not apply to all connectors. Detailed specifications for individual connectors are available on request. .119/.124 .422 min. **Some proportions altered to illustrate detail. 1 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Plugs Straight Plug - Military Clamp For Flexible Cable B dia. A A Figure 1 Cable Group Figure 1 1 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 2, 3 5, 6 5, 6 5, 6 7 7 8 9 9 15 15 16 16 20 25 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 3 3 1 1 3 2 B dia. B dia. A Figure 3 Figure 2 Dimensions A B 1.50 1.50 1.80 1.50 1.50 1.50 1.50 1.50 1.50 1.41 1.41 1.41 1.38 1.38 1.41 1.38 1.38 2.42 2.42 1.80 1.80 3.09 1.38 .750 .750 .680 .750 .750 .750 .750 .750 .750 .500 .500 .500 .500 .500 .500 .500 .500 .750 .750 .880 .880 1.31 .500 Body Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Nickel Silver Nickel Nickel (Includes armor clamp) Plating Contact Silver Silver Silver Gold Gold Gold Silver Gold Gold Silver Gold Gold Silver Silver Silver Silver Silver Silver Gold Silver Gold Silver Silver ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Assembly Procedure/ Trim Code Delta P/N UG-18E/U 1101001N001-000 UG-21B/U UG-21D/U UG-21E/U UG-21G/U UG-1185/U UG-1185A/U M39012/01-0005 * UG-536B/U UG-536C/U 1101015N001-000 UG-603A/U 1101021N001-000 1101043N001-000 1101036N000-000 1101036N001-000 UG-941B/U M39012/01-0125 * UG-204A/U M39012/01-0015 * UG-557A/U 1101132N000-000 A/01 A/01 C/01 A/01 A/01 A/01 A/01 A/01 A/01 A/02 A/02 A/02 A/02 A/02 A/02 A/02 A/02 D/01 D/03 C/02 A/01 D/02 A/03 * Lockwire holes in coupling nut. Optional Type N Coupling Nut Examples .033 dia. lockwire holes (3) .812 13/16 " hex .812 13/16 " hex coupling nut hex hex coupling nut with lockwire holes These designs allow the connectors to be tightened with a wrench for precise torquing of mated parts, and can be supplied on any Delta type N plug. Please call for details of these options or any other special requirements you may have. * See page 209 for cable groups. * Assembly procedures start on page 210. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 2 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Plugs Straight Plug - Crimp Type For Flexible Cable Figure 2 Figure 1 B B (crimp sleeve) Cable Group Figure 2 2 2 2 2B 3A, 4 3A, 4 3A, 3C, 4 3A, 3C, 4 4 5 5 6 6 6 7 7 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 2 1 (crimp sleeve) A A Dimensions A B 1.51 1.55 1.55 1.55 1.55 1.55 1.51 1.55 1.55 1.50 1.43 1.48 1.43 1.45 1.45 1.43 1.38 Plating Body Contact .630 .630 .600 .600 .630 .630 .630 .600 .600 .630 .500 .500 .500 .500 .500 .500 .500 Nickel Nickel Silver Silver Nickel Nickel Nickel Silver Silver Nickel Nickel Nickel Nickel Nickel Silver Nickel Nickel Silver Gold Gold Gold Silver Gold Silver Gold Gold Silver Silver Gold Silver Gold Gold Silver Gold Assembly Procedure/ Trim Code Delta P/N ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) 1103002N000-000 1103002N001-009 M39012/01B0007 M39012/01-0502 1103070N000-000 1103004N001-001 1103005N000-000 M39012/01B0008 M39012/01-0501 1103079N000-000 1103017N000-000 1103017N001-000 1103013N000-000 1103018N001-000 M39012/01-0503 1103020N000-000 1103020N001-000 B/01 B/03 B/03 B/03 B/01 B/03 B/01 B/03 B/03 B/01 B/04 B/05 B/04 B/03 B/03 B/06 B/03 * * * * * * Lockwire holes in coupling nut. Straight Plug - Heli-Grip(R) For Flexible Cable Heli-Grip (R) Cable Attachment B dia. B dia. A A Figure 1 Cable Group Figure 2 3 5, 6 RG-223 7 24 26 1 1 2 2 2 1 1 These connectors have captivated contacts and allow rapid, easy assembly--simply trim the cable, slide into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw body assembly (right) onto cable assembly. Figure 2 Dimensions A B 1.50 1.50 1.41 1.41 1.38 1.50 1.50 .750 .750 .500 .500 .500 .750 .750 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1101004N005-000 1101004N005-006 1101015N005-000 1101015N005-001 1101021N005-000 1101052N005-000 1101108N005-000 E/01 E/01 E/02 E/02 E/02 E/01 E/01 * See page 209 for cable groups. * Assembly procedures start on page 210. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 3 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Plugs Straight Plug - For Semi-Rigid Cable B dia. B ( I.D. ) A A Figure 1 Figure 2 (Solder-clamp; gold-plated ferrule, nickel-plated body) (Direct solder; gold-plated body, nickel ( 1) or passivated ( 2) coupling nut) Delta One-Step Cable Attachment Straight Plugs - For Semi-Rigid Cable Solder Cable B Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. B ( I.D. ) ( I.D. ) A A Figure 3 Figure 12 12 12 13 13 13 13 13 14 1 2 4 1 2 2 3 4 1 Dimension s A B 1.50 .960 1.44 1.41 .960 .960 .960 .960 1.41 .500 .254 .254 .500 .143 .143 .143 .143 .500 hex Figure 4 (One-Step cable attachment, standard coupling nut) Cable Group .812 (One-Step cable attachment, hex coupling nut) Plating Body Contact Nickel Mixed( 1) Silver Nickel Mixed( 1) Mixed( 2) Silver Silver Nickel ( 1) ( 2) Silver Silver Gold ( C ) Silver Gold Gold Gold ( C ) Gold ( C ) Silver Assembly Procedure/ Trim Code Delta P/N 1101050N000-000 1101050N003-000 1101050A003-007 1101031N003-000 1101031N003-001 1101031K00M-000 1101031A003-008 1101031A003-012 1101025N003-000 F/03 *** I/01 F/01 *** *** I/01 I/01 F/02 Brass body and coupling nut. Stainless steel body and coupling nut. * See page 209 for cable groups. * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 4 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Plugs Right Angle Plug - Military Clamp For Flexible Cable A A A B B B C dia. C dia. Figure 1 C dia. Figure 2 (Mitered body) Figure 3 (Cube body with access cap) Cable Group Figure 2, 3 2, 3 2, 3 5 5, 6 5, 6 7 9 19 1 3 3 3 2 3 2 2 3 A Dimensions B C 1.47 1.36 1.39 1.39 1.55 1.35 1.55 1.55 1.36 1.88 1.66 1.66 2.00 1.28 1.55 1.28 1.28 1.66 .750 .750 .750 .750 .500 .560 .500 .500 .750 Body Plating Contact Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold Gold Gold Silver Silver Silver Silver Silver ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) (Cube body) Delta P/N Assembly Procedure/ Trim Code UG-594B/U M39012/05-0101 1105004N000-000 1104032N001-000 1105015N000-000 1105015N001-000 1105021N000-000 1105036N001-000 1104027N001-000 A/01 A/07 A/04 A/08 A/11 A/09 A/11 A/11 A/07 Right Angle Plug - Crimp For Flexible Cable A A A B B B C dia. Figure 1 Figure 2 (Cube body) Cable Group Figure 2 2 3 2 3 6 1 2 1 3 3 3 C dia. Figure 3 (Cube body with access cap) Dimensions A B C 1.39 1.39 1.39 1.41 1.41 1.41 1.77 1.25 1.77 2.30 2.30 2.25 .750 .-- .750 .687 .687 .687 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Silver Silver Silver Gold Gold Gold ( C) ( C) ( C) ( C) (Mitered body) Delta P/N Assembly Procedure/ Trim Code 1107002N000-000 1107002N000-001 1107005N000-000 1107002N001-002 1107004N001-002 1107034N001-001 B/07 B/09 B/07 B/30 B/30 B/08 * See page 209 for cable groups. * Assembly procedures start on page 210. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 5 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Plugs / Jacks Tee Plug - For Flexible & Semi-Rigid Cable A A Figure 1 Figure 2 (Crimp type for flexible cable) (Direct solder for semi-rigid cable) B Cable Group Figure 2 3 6 7 9 13 1 1 1 1 1 2 A Dimensions B 1.39 1.39 1.39 1.39 1.39 1.39 2.00 2.00 1.82 1.82 1.82 .900 B Body Plating Contact Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver Silver ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1185002A000-000 1185004A000-002 1185013A001-000 1185019A000-000 1185036A000-000 1185031A000-000 B/16 B/16 B/17 B/17 B/17 *** Straight Jack - Military Clamp For Flexible Cable B dia. A A Figure 1 Figure 2 Cable Group Figure 1 1 2, 3 2, 3 2, 3 2, 3 2, 3 5, 6 5, 6 7 7 7 15 19 22 1 1 1 1 1 1 1 2 2 2 2 2 3 1 1 B dia. B dia. A Dimensions B 1.56 1.67 1.56 1.56 1.56 1.56 1.67 1.41 1.47 1.41 1.27 1.47 2.25 1.56 1.87 .750 .750 .750 .750 .750 .750 .750 .500 .500 .500 .500 .500 .750 .750 .690 A Figure 3 (Includes armor clamp) Plating Body Contact Nickel Silver Nickel Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold Silver Gold Silver Silver Gold Silver Silver Silver Silver Silver Silver Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) Assembly Procedure/ Trim Code Delta P/N UG-20E/U M39012/02-0101 UG-23D/U UG-23F/U UG-1186/U UG-1186A/U M39012/02-0003 1108015N000-000 1108015N001-000 UG-602A/U 1108000N000-003 * 1108021N001-000 UG-940B/U 1108027N001-000 1108123N000-000 A/01 A/01 A/01 A/01 A/01 A/01 A/01 A/05 A/02 A/02 -- A/02 D/03 A/12 C/03 *UG-602A/U less clamping hardware. * See page 209 for cable groups. * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 6 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Jacks Straight Jack - Crimp Type For Flexible Cable Figure 1 B (crimp sleeve) Cable Group Figure 2 2 2 2 3 3 3 3 6 6 1 1 1 1 1 1 1 1 1 1 Dimensions A B 1.64 1.64 1.47 1.60 1.64 1.64 1.47 1.60 1.56 1.54 A Plating Body Contact .600 .600 .500 .630 .600 .600 .500 .630 .500 .500 Silver Silver Nickel Nickel Silver Silver Nickel Nickel Nickel Silver ( C) ( C) Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code M39012/02B0008 M39012/02-0502 1110002N000-000 1110002N001-000 M39012/02B0009 M39012/02-0501 1110005N000-000 1110005N001-000 1110013N000-001 M39012/02-0503 B/10 B/03 B/10 B/11 B/10 B/03 B/10 B/10 B/12 B/03 Straight Jack - Heli-Grip(R) For Flexible Cable B dia. B dia. Figure 2 Figure 1 A A Cable Group Figure 2, 3 5, 6 RG-223 7 8 9 1 2 2 2 2 2 Dimensions A B 1.63 1.41 1.41 1.41 1.41 1.41 Plating Body Contact .750 .500 .500 .500 .500 .500 Nickel Nickel Nickel Nickel Nickel Nickel Gold ( C ) Gold ( C ) Gold ( C ) Gold ( C ) Gold ( C ) Gold ( C ) Delta P/N Assembly Procedure/ Trim Code 1108004N005-002 1108018N005-002 1108015N005-000 1108019N005-002 1108029N005-001 1108037N005-002 E/01 E/02 E/02 E/02 E/02 E/02 Except RG-223/U. Straight Jack - For Semi-Rigid Cable B ( I.D. ) B ( I.D. ) Figure 2 Figure 1 A A Cable Group Figure 12 13 1 2 Dimensions A B 1.07 1.00 .254 .143 Plating Body Contact Silver Silver Gold Gold Delta P/N Assembly Procedure/ Trim Code 1108050A003-003 1108031A003-000 *** *** * See page 209 for cable groups. * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 7 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Jacks Bulkhead Jack - Military Clamp For Flexible Cable C dia. C dia. A Figure 1 D dia. B A Figure 2 (Rear mount) Cable Group Fig. 1 2, 3 2, 3 2, 3 5, 6 5, 6 7 7 9 10 11 16 1 1 1 1 2 2 2 2 2 2 2 1 (Rear mount) Dimensions A B C 1.75 .920 .750 1.75 .920 .750 1.84 .920 .750 1.75 .920 .750 1.67 .920 .500 1.67 .920 .500 1.47 .920 .500 1.47 .920 .500 1.48 .920 .500 1.48 .920 .500 1.48 .920 .500 1.90 .920 .880 D dia. B D Mounting Figure Max. Panel .900 .875 .812 .875 .812 .875 .875 .875 .875 .875 .875 .875 72 72 72 72 72 72 72 72 72 72 72 72 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 Plating Body Contact Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold Silver Silver Gold Silver Gold Silver Gold Silver Silver Silver Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code M39012/03-0101 UG-160D/U 1116003N721-000 1116004N720-001 UG-556B/U 1116015N721-000 1116021N720-000 1116021N721-000 1116036N721-000 1116100N721-000 1116038N721-000 M39012/03-0102 A/01 A/01 *** A/01 A/06 A/02 A/14 A/14 A/10 A/10 A/10 A/01 Bulkhead Jack - Crimp Type For Flexible Cable Figure 1 (Rear mount) C B D dia. D Mounting Figure Max. Panel Plating Body Contact .875 .875 .875 .875 .875 .875 .812 .812 .812 72 72 72 72 72 72 72 72 72 .250 .250 .250 .250 .250 .250 .250 .250 .250 (crimp sleeve) A Cable Group Fig. 2 2 3 3 6 6 7 9 10 1 1 1 1 1 1 1 1 1 Dimensions A B C 1.84 1.84 1.84 1.84 1.74 1.74 1.59 1.45 1.45 .920 .600 .920 .600 .920 .600 .920 .600 .950 .500 .920 .500 .920 .500 .880 .440 .880 .440 Silver Silver Silver Silver Nickel Silver Nickel Nickel Nickel Gold Gold Gold Gold Gold Gold Silver Silver Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code M39012/03B0004 M39012/03-0502 M39012/03B0005 M39012/03-0501 1119013N721-000 M39012/03-0503 1119020N720-000 1119036N721-000 1119100N721-000 B/03 B/03 B/03 B/03 B/13 B/03 B/14 B/15 B/15 * See page 209 for cable groups. * Assembly procedures start on page 210. * ***Contact factory for cable assembly instructions * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 8 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Jacks Bulkhead Jack - Heli-Grip(R) For Flexible Cable C dia. C dia. .812 B A Figure 1 dia. A Figure 2 .812 B dia. Heli-Grip (R) Cable Attachment These connectors have captivated contacts and allow rapid, easy assembly--simply trim the cable, slide into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw body assembly (right) onto cable assembly. Cable Group Fig. 2, 3 5, 6 RG-223 7 10 1 2 2 2 2 Dimensions A B C 1.84 1.69 1.69 1.69 1.69 .920 .920 .920 .920 .920 Mounting Figure Max. Panel 72 72 72 72 72 .250 .250 .250 .250 .250 .750 .500 .500 .500 .500 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1116004N725-000 1116015N725-000 1116015N725-001 1116021N725-000 1116100N725-000 E/01 E/03 E/03 E/03 E/03 Except RG-223/U. Tee Bulkhead Jack - For Flexible & Semi-Rigid Cable A A C dia. C dia. B B .675 .675 Figure 1 Figure 2 (Crimp type for flexible cable) Cable Group Fig. 2 3 6 7 9 13 1 1 1 1 1 2 Dimensions A B C 1.40 1.40 1.38 1.38 1.38 1.38 2.00 2.00 1.89 1.89 1.89 .900 .750 .750 .750 .750 .750 .750 (Direct solder for semi-rigid cable) Mounting Figure Max. Panel 55 55 55 55 55 55 .100 .100 .100 .100 .100 .100 Plating Body Contact Silver Silver Silver Silver Silver Silver Silver ( C ) Silver ( C ) Silver ( C ) Silver ( C ) Silver ( C ) Silver ( C ) Delta P/N 1185002A551-000 1185004A551-000 1185013A551-000 1185019A551-000 1185036A551-000 1185031A551-000 Assembly Procedure/ Trim Code B/16 B/16 B/17 B/17 B/17 *** * See page 209 for cable groups. * Assembly procedures start on page 210. * *** Contact factory for cable assembly instructions. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 9 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Jacks Bulkhead Jack - For Semi-Rigid Cable C O-ring Backnut Collet Ferrule .812 B A Figure 1 dia. (Collet clamp [solderless] cable attachment, captive contact in body) C dia. C .812 B A Figure 2 ( I.D. ) dia. .812 B dia. A Figure 3 (Direct solder) (Solder-clamp; gold-plated ferrule, nickel-plated body) Delta One-Step Cable Attachment - For Semi-Rigid Cable One-Step Cable Attachment C Cable Delta "One-Step" connectors feature captivated contacts and insulators to allow rapid, easy assembly to semi-rigid cable--simply trim the cable jacket and dielectric flush, chamfer the center conductor, insert into the connector, and solder the jacket to the connector body. Cable Group Fig. 12 13 13 13 14 14 14 1 2 3 4 2 3 4 ( I.D. ) Solder Dimensions A B C 1.55 1.67 1.33 1.38 1.67 1.33 1.38 .889 .922 .884 .922 .922 .884 .922 .500 .500 .145 .143 .500 .090 .088 B A .875 dia. Figure 4 (One-Step cable attachment) Mounting Figure Max. Panel 72 72 72 72 72 72 72 .250 .250 .250 .250 .250 .250 .250 Plating Body Contact Nickel Nickel Nickel Silver Nickel Nickel Silver Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) Delta P/N 1116163N721-000 1116031N720-000 1116031N723-001 1116031A723-003 1116025N723-000 1116025N723-001 1116025A723-002 Assembly Procedure/ Trim Code *** F/04 *** I/01 F/04 *** I/01 * See page 209 for cable groups. * Assembly procedures start on page 210. * *** Contact factory for cable assembly instructions. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 10 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Jacks Panel Jack - For Flexible Cable C dia. C dia. B B A A Figure 1 Figure 2 Heli-Grip (R) Cable Attachment (where noted) These connectors have captivated contacts and allow rapid, easy assembly--simply trim the cable, slide into the cone/insulator/contact assembly (left), solder the center conductor to the contact, and screw body assembly (right) onto cable assembly. Military Clamp For Flexible Cable Cable Group Fig. 1 2, 3 2, 3 2, 3 2, 3 2, 3 5, 6 5, 6 5, 6 5, 6 5, 6 7 9 9 19 22 1 1 1 1 1 1 2 2 2 2 2 2 2 2 1 1 A Dimensions B C Mounting Figure 1.67 1.58 1.58 1.58 1.58 1.67 1.41 1.41 1.41 1.48 1.41 1.41 1.44 1.48 1.56 1.87 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .660 .750 .750 .750 .750 .750 .750 .500 .500 .500 .500 .500 .500 .500 .500 .750 .690 33 33 33 33 33 33 33 33 27 27 33 33 33 33 33 30 Plating Body Contact Silver Nickel Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Gold Silver Gold Silver Silver Gold Silver Gold Silver Gold Silver Silver Silver Silver Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code M39012/02-0104 UG-22D/U UG-22F/U UG-1187/U UG-1187A/U M39012/02-0006 UG-1095B/U UG-1095C/U 1111015N270-000 1111015N271-000 1111015N331-000 UG-593A/U 1111036N330-000 1111036N331-000 1111027N331-000 1111123N300-000 A/01 A/01 A/01 A/01 A/01 A/01 A/13 A/13 A/13 A/02 A/02 A/14 A/16 A/15 A/12 C/03 Delta P/N Assembly Procedure/ Trim Code 1111004N335-000 1111015N335-000 1111015N335-001 1111021N335-000 1111037N335-001 1111100N335-001 E/01 E/03 E/03 E/03 E/03 E/03 Heli-Grip For Flexible Cable Cable Group Fig. 2, 3 5, 6 RG-223 7 9 10 1 2 2 2 2 2 A 1.58 1.41 1.41 1.41 1.41 1.41 Dimensions B C .660 .660 .920 .660 .660 .660 .750 .500 .500 .500 .500 .500 Mounting Figure 33 33 33 33 33 33 Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) ( C) Except RG-223/U. * See page 209 for cable groups. * Assembly procedures start on page 210. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 11 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Cable Jacks Panel Jack - Crimp Type For Flexible Cable Captive insulator C Crimp sleeve B Backnut/crimp tail A Figure 1 Cable Group Fig. 2 3 5 6 6 9 1 1 2 2 1 2 Figure 2 (Standard crimp type) A Dimensions B C Mounting Figure 1.64 1.64 1.19 1.19 1.54 1.16 .660 .660 .595 .595 .660 .595 .600 .600 .500 .500 .500 .380 33 33 33 33 33 33 Captive contact C B A (Contact and insulator captive in backnut) Plating Body Contact Silver Silver Nickel Nickel Silver Nickel Gold Gold Silver Silver Gold Silver ( C) ( C) ( C) ( C) ( C) ( C) Assembly Procedure/ Trim Code Delta P/N M39012/02-0512 M39012/02-0511 1155017N331-000 1155013N331-000 M39012/02-0513 1155037N331-000 B/03 B/03 *** *** B/03 *** Panel Jack - For Semi-Rigid Cable C dia. Figure 1 (Solder-clamp; gold-plated ferrule, nickel-plated body) B A C ( I.D. ) C A B B Figure 2 (One-Step cable attachment--see page 76 for details) Cable Group Fig. 13 13 13 14 14 14 1 2 3 1 2 3 A 1.41 1.11 1.07 1.41 1.11 1.07 Dimensions B C .660 .660 .640 .660 .660 .640 .500 .143 .143 .500 .088 .088 ( I.D. ) Mounting Figure 33 09 33 33 09 33 Figure 3 A (One-Step cable attachment--see page 76 for details) Plating Body Contact Nickel Silver Silver Nickel Silver Silver Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) Delta P/N Assembly Procedure/ Trim Code 1111031N333-001 1111031A091-001 1111031A333-004 1111025N333-000 1111025A091-001 1111025A333-002 F/05 I/01 I/01 F/05 I/01 I/01 * See page 209 for cable groups. * Assembly procedures start on page 210. * *** Contact factory for cable assembly instructions. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 12 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Panel Jack Receptacle -Solder Pot Contact D C .032 .162 ( I.D. ) C dia. ( I.D. ) B .050 A D B A dia. Figure 2 ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) Figure 1 D C ( I.D. ) Figure 3 B A Figure 1 1 1 1 1 1 1 1 2 3 A 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 .735 1.13 Dimensions B C .660 .660 .660 .660 .660 .660 .660 .660 .075 .660 .100 .100 .100 .100 .100 .100 .100 .100 .125 .100 Plating Mounting Figure D .080 .080 .050 .080 .080 .080 .080 .080 .250 .080 33 33 18 32A 32 33 33 95 09 33 Body Contact Nickel Silver Nickel Nickel Nickel Silver Nickel Nickel Nickel Nickel Silver Gold Silver Silver Gold Gold Gold Silver Silver Gold Delta P/N ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) ( C) UG-58A/U M39012/04-0002 1113000N181-000 1113000N321-002 1113000N321-003 1113000A331-011 1113000N331-011 1113000N951-000 1113000N091-002 1113000N331-009 Panel Jack Receptacle - Solder Pot Contact Round Flange (For Solder Or Setscrew Mounting) D C 1 1 2 A B 1.25 1.25 1.13 .660 .660 .660 E dia. B A Figure 1 E dia. Figure C ( I.D. ) Dimensions C D .100 .100 .100 .175 .125 .110 Plating E Body Contact 1.50 1.25 .575 Nickel Nickel Nickel Silver ( C ) Gold ( C ) Silver ( C ) D ( I.D. ) B A Figure 2 Delta P/N 1113000N911-002 1113000N911-005 1120000N831-000 * (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. * See page 6 for alternate body plating information. * All items are available with other flange sizes and contact configurations. 13 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Panel Jack Receptacle -Slotted Contact B D C dia. D dia. slot width .075 A C Figure 1 ( 11/ 16 " Figure 2 square flange, interchangeable with BNC and TNC standard flange size) Figure A 1 1 1 1 2 2 2 2 2 .735 .735 .735 .735 .736 .736 .736 .735 .736 Dimensions B C .050 .050 .050 .050 .080 .080 .080 .080 .080 B .120 slot width .086 .086 .086 .050 .050 .050 .050 .050 .050 Plating D Mounting Figure Body .012/.017 .036 .007/.012 .012/.017 .012/.017 .026/.030 .020/.025 .026/.030 .012/.017 09 09 09 09 33 33 33 33 33 Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Delta P/N Contact Gold Gold Gold Gold Gold Gold Gold Gold Gold A ( C) * ( C) * ( C) * ( C) * ( C) * ( C) * ( C) ( C) ( C) 1143000N091-002 1143000N091-003 1143000N091-004 1143000N091-009 1143000N330-010 1143000N331-017 1143000N331-023 1143000N331-054 1143000N331-055 *Epoxy-captivated contact. Panel Jack Receptacle -Tab Contact D C Tab .005/.010 thick x .120 wide C Tab D thick x .120 wide Figure 1 Figure 2 .384 dia. B A B A C Tab D thick x .050 wide Figure 3 ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) B Figure 1 2 3 A .736 .736 .735 Dimensions B C .080 .080 .075 .195 .100 .050 D Mounting Figure .350 .005/.008 .004/.006 33 33 09 A Plating Body Contact Nickel Silver Silver Delta P/N Gold ( C ) * Gold ( C )* Gold ( C )* 1143000N330-012 1158000A331-012 1158000A091-023 *Epoxy-captivated contact. * (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. * See page 6 for alternate body plating information. * All items are available with other flange sizes and contact configurations. 14 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Panel Jack Receptacle - Post Contact D C .162 .120 dia. .050 B A C dia. D B A dia. Figure 2 Figure 1 ( 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) D .120 dia. .384 .162 C dia. .050 B A Figure 3 dia. C D dia. B A Figure 4 ( 1/ 2 " square flange, interchangeable with SMA standard flange size) .162 C dia. B O-ring D .050 A dia. Figure 5 (O-ring seal on flange, 11/ 16 " square flange, interchangeable with BNC and TNC standard flange size) Figure 1 2 2 2 3 3 4 5 5 5 A .736 .735 .735 .735 .736 .736 .814 .735 .735 .735 Dimensions B C .080 .075 .075 .075 .080 .080 .080 .075 .075 .075 .660 .125 .125 .590 .590 .590 .590 .200 .750 .375 Plating D Mounting Figure Body .560 .250 .250 .705 .705 .705 .705 .450 .875 .425 33 09 09 09 33 33 05 09 09 09 Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Contact Gold Silver Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) * ( C) * ( C) ( C) ( C) ( C )* Delta P/N 1113000N331-028 1143000N091-018 1143000N091-030 1143000N091-069 1143000N330-018 1158000N331-015 1143000N051-002 1143000N091-059 1143000N091-073 1143000N091-075 *Epoxy-captivated contact. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. * All items are available with other flange sizes and contact configurations. 15 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Right Angle Panel Jack Receptacle D D ( I.D. ) dia. A C A C B B Figure 1 D Figure 2 .120 dia. dia. D A C A slot width C Figure A 1 1 2 3 4 1.41 1.41 1.41 1.41 1.41 Dimensions B C 1.16 1.16 1.16 .830 1.17 .300 .300 .750 .560 .050 B B Figure 3 Figure 4 Plating D Mounting Figure Body Contact .101 .101 .120 .120 .020/.025 33 33 33 33 33 Nickel Nickel Nickel Nickel Nickel Silver Gold Silver Gold Silver Delta P/N ( C) ( C) ( C) ( C) ( C) UG-997A/U 1115000N330-005 1115000N330-009 1115000N330-012 1115000N330-011 Dummy Receptacle B A Dimensions A B .740 .080 Mounting Figure 33 Plating Body Contact Nickel -- Delta P/N 1163000N330-000 * (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. * See page 6 for alternate body plating information. * All items are available with other flange sizes and contact configurations. 16 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Panel Plug Receptacles B C Figure 1 dia. Figure 2 (Solder pot contact) (Slotted contact) A D slot width Figure 3 D slot width C C D B .120 ( I.D. ) C Tab D thick x .065 wide Figure 4 (Slotted contact) A (Tab contact) .050 B dia. B A C Figure 5 .162 dia. .050 dia. C A B Figure 6 (Post contact) (Post contact) D dia. B A D .120 dia. D A C Figure 7 (Post contact) .384 Figure 1 1 2 2 2 3 4 5 6 7 7 7 A 1.10 1.10 .780 .810 .810 1.17 .810 .810 1.17 .810 .810 .810 Dimensions B C .080 .080 .080 .080 .080 .075 .080 .080 .075 .080 .080 .080 .101 .101 .050 .050 .050 .050 .100 .360 .125 .590 .330 .330 D Mounting Figure .720 .720 .012/.017 .012/.017 .026/.030 .020 .005/.008 .120 .250 1.10 .488 .488 33 33 33 33 33 09 33 33 09 33 33 33 dia. B A Plating Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold ( C) ( C) ( C) ( C) ( C) * ( C) * ( C) * ( C) ( C) ( C) * ( C) * Delta P/N 1123000N330-000 1123000N330-004 1159000N330-001 1159000N330-013 1159000N331-026 1159000N091-004 1159000N331-009 1123000N330-002 1159000N091-010 1159000N331-006 1159000N330-011 1159000N331-000 *Epoxy-captivated contact. * (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. * See page 6 for alternate body plating information. * All items are available with other flange sizes and contact configurations. 17 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Bulkhead Jack Receptacles C .812 C ( I.D. ) dia. B A Figure 1 Figure 2 C 1 1 1 2 3 3 4 1.62 1.62 1.62 1.53 1.25 1.25 1.15 .707 .707 .707 .919 .606 .606 .562 B A Figure 4 Figure 3 A ( I.D. ) B (Front mount, no gasket, screw-in type for 9/ 16 -24 tapped hole) (Front mount, no gasket) Dimensions B dia. (Rear mount, hermetically sealed, with mounting gasket) ( I.D. ) A Figure .812 B A (Front mount, hermetically sealed, with mounting gasket) C ( I.D. ) Plating C Max. Panel Mounting Figure Body .099 .099 .099 .099 .099 .099 .099 .100 .100 .100 .250 .100 .100 .100 72 72 72 72 59 59 ** Nickel Nickel Silver Nickel Nickel Nickel Nickel Delta P/N Contact Silver Silver Gold Silver Silver Gold Silver ( C) ( C) ( C) ( C) ( C) ( C) ( C) UG-680/U UG-680A/U M39012/04-0001 1121000N728-005 1120000N590-000 1120000N590-004 1120000N591-000 Stripline Receptacles C holes, A dia. x B deep C holes, A dia. x B deep D .750 dia. b.c. Socket contact E dia. x F deep G Figure 1 Figure 1 1 1 2 H H dia. E D dia. b.c. dia. .120 F .875 .140 dia. G dia. Figure 2 Dimensions Plating A B C D E F G H Body Contact #2-56 .078 #2-56 #2-56 .250 .313 .250 .125 7 7 7 10 .560 .500 .560 .734 #0-80 .063 #2-56 .125 .125 .156 .125 .010 .734 .734 .734 .816 .422 .656 .422 .125 Nickel Nickel Nickel Nickel Silver Silver Silver Silver Delta P/N 1156000N000-000 1156000N000-002 1156000N000-003 1157000N000-003 * See page 6 for alternate body plating information. * (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. * All items are available with other flange sizes and contact configurations. 18 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Receptacles Press Mount Jack Receptacles Component housing Delta PressMount Receptacles These connectors eliminate the need for complicated mounting hole patterns and mounting hardware. They are simply pressed into a single through hole, and the precisely-engineered knurled mounting section provides retention strength far greater than normal mating and unmating forces. An integral shoulder provides a positive stop when mounting. Internal Circuitry PressMounts can be used in packages as small as the outer diameter of the connector body. .625 dia. .587 A .625 Figure 1 dia. .587 A Figure 2 (Post contact) (Tab contact) B dia. .454 .25 dia. over knurl .625 dia. Tab B thick x .120 wide .454 dia. over knurl A C .25 .587 ( I.D. ) Figure 3 (Solder pot contact) .120 .454 dia. .25 dia. over knurl Dimensions A B Figure 1 2 3 .110 .100 .285 .050 .005/.008 .100 Plating Min. Panel Mounting Hole Body Contact .200 .200 .200 .450 .001 dia. .450 .001 dia. .450 .001 dia. Nickel Nickel Nickel Gold ( C ) Gold ( C ) Gold ( C ) Delta P/N 1120000N911-002 1120000N911-003 1120000N911-004 Press Mount Plug Receptacles .95 A .95 A Figure 1 Figure 2 (Post contact) (Tab contact) B dia. .454 .454 .25 dia. over knurl .25 dia. over knurl .95 A C Figure 3 Tab B thick x .120 wide ( I.D. ) (Solder pot contact) .454 .120 .25 dia. over knurl Figure 1 2 3 Dimensions A B .110 .100 .250 .050 .005/.008 .100 dia. Plating Min. Panel Mounting Hole Body Contact .200 .200 .200 .450 .001 dia. .450 .001 dia. .450 .001 dia. Nickel Nickel Nickel Gold ( C ) Gold ( C ) Gold ( C ) Delta P/N 1124000N911-001 1124000N911-002 1124000N911-000 * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. * All items are available with other flange sizes and contact configurations. 19 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Accessories Resistive Plug Termination A C ( I.D. ) B Resistor 50 50 51 51 51 75 1%, 1 % , 5%, 5%, 5 % , 1 % , Dimensions B A 1 Watt 1 W att 1/2 W a t t 1/2 Watt 1 W att 1 W att 1.78 1. 87 1. 61 1.67 1. 87 1. 87 C .-- 5. 00 3. 50 .-- 3. 75 5. 00 .-- . 144 . 144 .-- . 144 . 144 Plating Features No chain No chain Body Contact Nickel Nickel Nickel Nickel Nickel Nickel Silver Gold Silver Silver Silver Gold ( C) ( C) ( C) ( C) ( C) ( C) Delta P/N 1151000N000-003 1151000N000-010 1131000N000-000 1131000N00A-000 1151000N000-000 1151000N000-011 Dust Caps A A C C ( I.D. ) ( I.D. ) B B Figure 1 Figure 2 (Shown with safety chain) Figure 1 1 1 1 2 2 A Dimensions B C .560 .560 .560 .840 .720 .910 2.25 2.50 3.75 2.50 3.50 2.50 .144 .144 .635 .170 .144 .170 (Shown with bead chain) Plating Body Contact Features Bead chain Bead chain Safety chain Bead chain / shorting type Bead chain Bead chain / shorting type Nickel Silver Silver Nickel Nickel Nickel -- -- -- Silver -- Silver ( C) ( C) Delta P/N MX-913/U M39012/25-0011 M39012/25-0012 1132000N00C-002 1133000N000-000 1133000N00C-000 * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. * Caps and terminations are available with other chain styles and/or resistances. 20 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Adapters Bulkhead & Panel Mounted Jack - Jack Adapters (Connect Two Plugs) .875 B A B dia. A Figure 1 Figure 2 (Bulkhead mount, hermetically sealed) Figure 1 1 1 1 2 Dimensions (Panel mount) A B Max. Panel Mounting Figure Body 1.54 1.54 1.54 2.06 1.75 .863 .863 .863 1.375 1.00 .250 .250 .250 .750 .-- 72 72 72 72 33 Nickel Nickel Silver Nickel Nickel Plating Contact Silver Silver Gold Silver Silver Delta P/N ( C) ( C) ( C) ( C) ( C) UG-30D/U UG-30E/U M55339/04-00030 1126000N728-000 1125000N330-000 Straight Adapters B dia. B dia. Figure 1 Figure 2 (Straight jack-jack; connects two plugs) (Straight plug-plug; connects two jacks) A A B dia. Figure 3 (Straight jack-plug; connects one plug and one jack) A Figure 1 1 2 2 3 Plating Dimensions A B Body 1.75 1.75 1.59 1.59 1.56 .660 .660 .780 .780 .780 Nickel Silver Nickel Silver Nickel Contact Silver Gold Silver Gold Silver ( C) ( C) ( C) ( C) ( C) Delta P/N UG-29B/U M55339/07-00029 UG-57B/U M55339/05-00057 * 1134000N000-000 * Lockwire holes in coupling nut. (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. See page 6 for alternate body plating information. 21 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N Adapters Right Angle Adapters B B B .875 dia. .92 A A Figure 2 Figure 1 (Right angle plug-jack; connects one plug and one jack) Figure 1 1 1 2 3 A Figure 3 (Bulkhead mounted right angle jack-jack; connects two plugs) (Right angle plug-plug; connects two jacks) Dimensions A B Max. Panel Mounting Figure Body 1.30 1.30 1.30 1.39 2.13 1.38 1.38 1.38 1.39 1.36 .-- .-- .-- .-- .250 .-- .-- .-- .-- 72 Nickel Nickel Silver Nickel Nickel Plating Contact Silver Gold Gold Silver Gold Delta P/N ( C) ( C) ( C) ( C) ( C) UG-27C/U UG-27D/U M55339/03-00027 * 1137000N000-000 UG-202A/U * Lockwire holes in coupling nut. Tee Adapters B B A Figure 1 A Figure 2 (Tee jack-jack-jack; connects three plugs) Figure 1 1 2 2 3 B A Figure 3 (Tee jack-plug-jack; connects two plugs and one jack) Dimensions (Tee jack-jack-plug; connects two plugs and one jack) Plating A B Body Contact 1.75 1.75 1.75 1.75 2.03 1.22 1.22 1.47 1.47 1.22 Nickel Silver Nickel Silver Nickel Silver Gold Silver Gold Gold ( C) ( C) ( C) ( C) ( C) Delta P/N UG-28A/U M55339/06-00028 UG-107B/U M55339/06-00001 1149000N001-001 * (C) in contact plating column indicates captive contact. * See page 208 for mounting dimensions. * See page 6 for alternate body plating information. 22 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N70 Connectors N70 Configurations Straight Cable Plugs ....................................................89 Straight Cable Jacks .....................................................89 Bulkhead Cable Jacks ..................................................89 Panel Jack Receptacles (square flange) ................90 Right Angle Panel Jack Receptacles .....................90 Panel Plug Receptacles..............................................90 Bulkhead Jack Receptacles ......................................90 In-Series Adapters ........................................................91 Straight Plug - Military Clamp For Flexible Cable B dia. B dia. Figure 1 Figure 2 A A Cable Group Figure 2B, 3B 7 1 2 Dimensions A B 1.80 1.38 .690 .500 Plating Body Contact Nickel Nickel Silver Silver Delta P/N Assembly Procedure/ Trim Code UG-94A/U 1801021N000-000 C/01 A/02 Straight Jack - Military Clamp For Flexible Cable B dia. B dia. Figure 1 Figure 2 A A Cable Group Figure 2B, 3B 7 1 2 Dimensions A B 1.88 1.41 .690 .500 Plating Body Contact Nickel Nickel Gold Silver Delta P/N Assembly Procedure/ Trim Code UG-95A/U 1808021N000-000 C/08 A/02 Bulkhead Jacks - For Flexible Cable Figure 1 Figure 2 (Military clamp) (Crimp) C dia. Cable Group Fig. 2B, 3B 7 2B, 3B 7 1 1 2 2 A Dimensions A B C 1.84 1.47 1.84 1.59 .920 .920 .920 .920 .690 .500 .600 .500 .875 B C dia. (crimp sleeve) A Mounting Figure Max. Panel 72 72 72 72 .250 .250 .250 .250 Plating Body Contact Nickel Nickel Nickel Nickel Gold Silver ( C ) Gold Silver B .875 Delta P/N Assembly Procedure/ Trim Code 1816003N720-000 1816021N721-000 1819003N720-000 1819020N720-000 C/08 A/14 B/03 B/14 * See page 209 for cable groups. * Assembly procedures start on page 210. * See page 208 for mounting dimensions. * (C) in contact plating column indicates captive contact. * See page 6 for alternate body plating information. 23 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 dia. sales@deltarf.com N70 Receptacles Panel Receptacle - Solder Pot Contact D .083 C D .083 dia. ( I.D. ) C dia. ( I.D. ) B A Figure 1 A Figure 2 (Straight jack receptacle) B (Straight plug receptacle) .083 D ( I.D. ) dia. A C B Figure 3 (Right angle jack receptacle) Figure 1 2 3 Dimensions B C A 1.13 1.10 1.41 .660 .720 1.16 .062 .062 .300 Plating D Mounting Figure Body .080 .080 .050 33 33 33 Nickel Nickel Nickel Contact Gold Silver Gold ( C) ( C) ( C) Delta P/N 1813000N331-000 1823000N331-001 1815000N330-000 Bulkhead Receptacle - Sodler Pot Contact D C .812 max. panel ( I.D. ) dia. B A Figure 1 (Front mount, hermetically sealed) Figure 1 Dimensions B C A 1.62 .707 .099 Plating D Mounting Figure Body Contact .250 72 Nickel Silver ( C ) Delta P/N 1820000N728-000 * See page 208 for mounting dimensions. * See page 6 for alternate body plating information. * (C) in contact plating column indicates captive contact. 24 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com N70 Adapters Straight Adapters B dia. B dia. Figure 1 Figure 2 (Straight jack-jack; connects two plugs) (Straight plug-plug; connects two jacks) A A Dimensions Figure 1 2 Plating A B Body Contact 1.75 1.59 .660 .780 Nickel Nickel Gold ( C ) Gold ( C ) Delta P/N 1828000N000-000 1827000N000-000 Right Angle & Tee Adapters Figure 1 (Right angle jack-plug; connects one plug and one jack) B A B B A Figure 2 A Figure 3 (Tee jack-jack-jack; connects three plugs) Figure 1 2 3 (Tee jack-plug-jack; connects two plugs and one jack) Dimensions Plating A B Body Contact 1.30 1.75 1.75 1.38 1.22 1.47 Nickel Nickel Nickel Gold ( C ) Gold ( C ) Gold ( C ) * (C) in contact plating column indicates captive contact. 25 Delta Electronics Mfg. Corp. deltarf.com Delta P/N 1829000N000-000 1838000N000-000 1830000N000-000 * See page 6 for alternate body plating information. 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure A Backnut 1) Trim cable jacket to dimension A. Slide backnut, washer, V-gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. Washer (if supplied) Washer and/or bushing (if supplied) Contact (captive) & insulator or V-Gasket 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with step of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. A Fold braid over 3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear bushing or washer (if supplied), rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. For right angle connectors with access cap, omit this step entirely. Contact (non-captive) Braid Clamp C B Non-captive Contact Captive Contact Solder Solder Washer or bushing (if supplied) 4) Insert prepared cable and hardware into body and tighten backnut. For right angle connectors with access cap, solder center conductor into slot in contact and tighten access cap. Trim Codes For Assembly Procedure A Code A B C Code A B C A/01 .375 (3/8) .047 (3/64) .203 (13/64) A/20 .375 (3/8) .047 (3/64) .172 (11/64) A/02 .375 (3/8) .109 (7/64) .203 (13/64) A/21 .500 (1/2) .313 (5/16) .172 (11/64) A/03 .438 (7/16) .250 (1/4) .188 (3/16) A/22 .375 (3/8) .188 (3/16) .141 (9/64) A/04 .281 (9/32) .047 (3/64) .125 (1/8) A/23 .438 (7/16) .078 (5/64) .172 (11/64) A/05 .313 (5/16) .125 (1/8) .109 (7/64) A/24 .500 (1/2) .094 (3/32) .141 (9/64) A/06 .594 (19/32) .391 (25/64) .156 (5/32) A/25 .438 (7/16) .141 (9/64) .172 (11/64) A/07 .375 (3/8) .047 (3/64) .125 (1/8) A/26 .625 (5/8) .281 (9/32) .250 (1/4) A/08 .281 (9/32) .109 (7/64) .094 (3/32) A/27 .688 (11/16) .281 (9/32) .125 (1/8) A/09 .344 (11/32) .109 (7/64) .094 (3/32) A/28 .656 (21/32) .297 (19/64) .250 (1/4) A/10 .406 (13/32) .109 (7/64) .203 (13/64) A/29 .688 (11/16) .125 (1/8) .313 (5/16) A/11 .500 (1/2) .281 (9/32) .156 (5/32) A/30 .688 (11/16) .469 (15/32) .156 (5/32) A/12 .343 .040 .219 A/31 .700 (21/32) .453 (29/64) .250 (1/4) A/13 .375 (3/8) .125 (1/8) .156 (5/32) A/32 .313 (5/16) .078 (5/64) .188 (3/16) A/14 .355 .090 .188 (3/16) A/33 .250 (1/4) .078 (5/64) .094 (3/32) A/15 .425 .094 (3/32) .259 A/34 .250 (1/4) .062 (1/16) .109 (7/64) A/16 .328 (21/64) .094 (3/32) .188 (3/16) A/35 .837 .575 .150 A/17 .375 (3/8) .109 (7/64) .125 (1/8) A/36 .450 .250 .150 A/18 .375 (3/8) .062 (1/16) .172 (11/64) A/37 .281 .038 .188 A/19 .375 (3/8) .188 (3/16) .094 (3/32) A/38 .281 .069 .156 CAI-A Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure B Crimp Sleeve Contact (captive) 1) Trim cable per chart. Slide crimp sleeve back onto cable. or Contact (non-captive) A B C 2) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Solder contact onto center conductor; back of contact flush with trimmed end of cable dielectric (omit this step for right angle connectors with access caps). Flare cut end of braid slightly by rotating dielectric. Solder 3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. a) For captive contact connectors, push cable in until contact snaps into insulator. b) For noncaptive contact connectors, push cable in until cable dielectric bottoms in connector. c) For right angle or tee connectors with access caps, push cable in until end of braid touches connector body shoulder, and cable center conductor rests in contact slot. Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex die sizes). For right angle or tee connectors with access caps: Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Trim Codes For Assembly Procedure B Code A B C Code A B C B/01 .320 .470 .140 B/20 .250 .375 .156 B/02 .422 .578 .172 B/21 .425 .550 .156 B/03 .406 .500 .187 B/22 .375 .500 .156 B/04 .285 .505 .140 B/23 .281 .469 .125 B/05 .335 .460 .140 B/24 .250 .700 .109 B/06 .187 .437 .219 B/25 .343 .775 .125 B/07 .422 .610 .156 B/26 .343 .437 .109 B/08 .422 .562 .219 B/27 .313 .437 .187 B/09 .313 .610 .203 B/28 .219 .271 .078 B/10 .280 .436 .187 B/29 .200 .320 .060 B/11 .430 .542 .156 B/30 .500 .650 .219 B/12 .300 .434 .156 B/31 .350 .840 .150 B/13 .300 .447 .156 B/32 .175 .260 .095 B/14 .420 .645 .187 B/33 .195 .270 .045 B/15 .300 .420 .120 B/34 .150 .250 .105 B/16 .312 .609 .125 B/35 .195 .280 .170 B/17 .250 .500 .156 B/36 .150 .325 .090 B/18 .437 .562 .109 B/37 .195 .295 .075 B/19 .343 .437 .156 B/38 .150 .225 .095 B/39 .250 .300 .135 CAI-B Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure C Backnut Contact (captive) & insulator Washer or Gasket Trim Codes Braid Clamp Fold braid over Code A B C C/01 .656 (21/32) .141 (9/64) .250 (1/4) C/02 .500 (1/2) .125 (1/8) .250 (1/4) C/03 .450 .136 .187 C/04 .375 (3/8) .109 (7/64) .125 (1/8) C/05 .375 (3/8) .062 (1/16) .250 (1/4) C/06 .500 (1/2) .188 (3/16) .125 (1/8) C/07 .575 .438 .094 C/08 .625 (5/8) .141 (9/64) Contact (non-captive) A 1) Trim cable jacket to dimension A. Slide backnut, washer, gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with edge of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. C B Non-captive Solder 3) If support insulator is provided for RG-62 or 71 cable, insert into hollow in dielectric. Assemble rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. Captive .219 (7/32) 4) Insert prepared cable and hardware into body and tighten backnut. For right angle connectors with access cap, solder cable center conductor to slot in contact and tighten access cap. Assembly Procedure D Backnut Contact (captive) & insulator Washer or Armor Clamp V-Gasket Contact (non-captive) A Braid Clamp Fold braid over C B A B C D/01 .375 (3/8) .047 (3/64) .250 (1/4) D/02 .500 (1/2) .188 (3/16) .219 (7/32) D/03 .344 (11/32) .047 (3/64) .219 (7/32) D/04 .313 (5/16) .047 (3/64) .172 (11/64) D/05 .625 (5/8) .281 (9/32) .250 (1/4) D/06 .313 (5/16) .062 (1/16) .109 (7/64) CAI-C-D 2) Comb braid wires out straight and fold back over front shoulder of braid clamp (braid wires should not overlap one another after folding). Trim braid wires flush with edge of braid clamp. Trim cable dielectric and center conductor to dimensions B and C. Non-captive Trim Codes Code 1) Slide armor clamp over cable. Push armor back to expose cable end. Slide backnut, washer (if supplied), gasket, and braid clamp onto cable as shown. Cable jacket should bottom on step in braid clamp. Trim cable jacket to dimension A. Solder 3) Assemble rear insulator (if captive contact) and contact, and solder contact to center conductor. Rear of contact should be flush with cable dielectric end. Captive 4) Insert prepared cable and hardware into body and tighten backnut. Trim armor to fit between armor clamp and braid clamp. Tighten armor clamp. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure E Backnut C B A Contact/Insulator/ cone grip assembly 1) Slide backnut onto cable as shown. Trim cable to dimensions A and B as shown. Slit jacket to dimension C in two places, 180 apart. Trim Codes Code A B C E/01 .250 (1/4) .141 (9/64) .313 (5/16) E/02 .219 (7/32) .063 (1/16) .250 (1/4) E/03 .250 (1/4) .031 (1/32) .250 (1/4) 2) Slide cone/insulator/contact assembly under braid until braid is flush with shoulder. Solder contact to center conductor. Solder 3) Insert prepared cable and hardware into body; tighten assembly by holding nut stationary and turning body. Assembly Procedure F Backnut Washer Contact (captive), insulator, & bushing B or Trim Codes V-Gasket Code A B F/01 .250 (1/4) .219 (7/32) F/02 .250 (1/4) .172 (11/64) F/03 .188 (3/16) .188 (3/16) F/04 .109 (7/64) .265 (17/64) F/05 .156 (5/32) .250 (1/4) F/06 .219 (7/32) .250 (1/4) F/07 .156 (5/32) .172 (11/64) F/08 .109 (7/64) .219 (7/32) Solder Ferrule Contact (non-captive) A 1) Trim cable per chart. Slide backnut, washer, v-gasket, and solder ferrule onto cable. Trimmed end of cable jacket should bottom on step in solder ferrule. Solder Captive Solder Solder 2) Solder ferrule to cable jacket as shown. Retrim cable dielectric to proper length if it has extruded from soldering heat. Slide bushing and rear insulator over cable dielectric if captive contact. Solder contact onto center conductor; back of contact flush with trimmed end of cable dielectric. Non-captive 3) Insert prepared cable and hardware into body and tighten backnut. CAI-E-F Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure G Body Coupling nut Gasket `C' ring Soft solder all around with end of body B A Trim Codes Code A B G/01 .090 70-90 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Soft solder cable jacket to body, making sure that end of cable is flush with end of body. After solder joint has cooled, retrim any protruding dielectric flush with end of body. 3) Assemble `C' ring and gasket to body. Compress `C' ring and slide body assembly into coupling nut until ring is seated in groove. Assembly Procedure H Body assembly Soft solder all around Contact A Trim Codes Code A H/01 H/02 H/03 H/04 .090 .060 .115 .150 with insulator .015" 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Solder contact to center conductor, fixturing to maintain gap as shown. Remove any excess solder from outside of contact. 3) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Plug body assembly and contact shown; procedure is identical for jack connectors. Assembly Procedure I Body assembly Soft solder all around with insulator B A Trim Codes Code A B I/01 .090 70-90 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Insert cable into body and solder cable jacket to body, keeping end of cable flush with insulator as shown. Plug body assembly and contact shown; procedure is identical for jack connectors. Cable Positioner .250-36 UNS-2A thread For .085" Cable: P/N 63-10072-2 For .141" Cable: P/N 63-10072-1 CAI-G-I .375 .50 Using this positioner in the final step of assembly procedure H or I (for plugs only) will ensure that the contact and insulator are retained in the proper position to meet MIL-C-39012 requirements. The positioner should be screwed finger-tight into the mating end of the connector (as shown at right) before the cable jacket is soldered to the body assembly. Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure J Press cap in until seated Cap Insulator (if supplied) Solder center conductor to contact Soft solder all around Trim Codes Code A B J/01 .109 .047 J/02 .059 .039 J/03 .059 .079 J/04 .050 .059 B A 1) Trim cable as shown. Remove any burrs from jacket and center conductor. 2) Soft solder cable jacket to body, making sure that end of cable is flush with step in body. Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Assembly Procedure K Heat-shrink tubing (if supplied) Crimp or solder sleeve 1) Trim cable per chart. Slide crimp (or solder) sleeve and heat-shrink tubing (if supplied) back onto cable. A Solder hole (for solder-type connectors only) B C Solder .015" Cable dielectric end Heat-shrink tubing Crimp or solder sleeve 2) Solder contact onto center conductor, fixturing to maintain gap as shown. Flare cut end of braid slightly by rotating dielectric. 3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail. Push cable in until cable dielectric bottoms in connector. Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body and sleeve through hole in sleeve.) Slide heat-shrink tubing into place and shrink with hot-air gun. Plug body assembly and contact shown; procedure is identical for jack connectors. Trim Codes CAI-J-K Code A B C Code A B C K/01 .250 .270 .110 K/07 .220 .290 .135 K/02 .200 .270 .140 K/08 .420 .620 .090 K/03 .225 .290 .110 K/09 .090 .135 .160 K/04 .225 .330 .110 K/10 .250 .415 .115 K/05 .250 .330 .110 K/11 .250 .400 .150 K/06 .250 .315 .095 K/12 .282 .390 .140 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Assembly Procedures Assembly Procedure L Trim Codes Code A B C L/01 .250 .438 .109 L/02 .125 .219 .109 L/03 .234 .344 .109 L/04 .195 .270 .050 L/05 .095 .155 .050 L/06 .281 .390 .070 Crimp or solder sleeve 1) Trim cable per chart. Slide crimp (or solder) sleeve onto cable. Solder hole (for solder-type connectors) A B C Press cap in until seated 2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push cable in until end of braid touches connector body shoulder and center conductor rests in contact slot. Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body and sleeve through hole in sleeve.) Solder center conductor into contact slot, assemble insulator disc (if supplied), then press cap into body until seated or screw into place. Cap Insulator (if supplied) Solder center conductor to contact Crimp or solder sleeve Assembly Procedure M Backnut Cable Trim Codes Code A B C M/01 .281 .390 .140 1) Trim cable per chart. Slide crimp (or solder) sleeve and backnut onto cable. Crimp or solder sleeve Solder hole (for solder-type connectors) A B C Clamp Contact Insulator 2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is flush with front of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor, with contact shoulder flush with front of insulator. Solder contact to center conductor. Solder 3) Slide crimp sleeve forward until flush with clamp shoulder; crimp as close to shoulder as possible. (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body and sleeve through hole in sleeve.) 4) Insert prepared cable into back of body. Slide nut forward and tighten to 12-15 inch-pounds. Crimp Tools For Flexible Cable M22520/5-01 * For Delta cable groups. See MIL-PRF-39012 specifications for dies sizes used with M39012 cable groups. CAI-L-M Frame only--P/N M22520/5-01 --Use with interchangeable dies listed below. Cable Group* Hex Die Size Die Set P/N Closure 2, 3, 4 .429 hex, .400 wide M22520/5-61 A 5, 6 .213 hex, .400 wide M22520/5-19 B 7 .255 hex, .400 wide M22520/5-19 A 9 .128 hex, .400 wide M22520/5-35 B 10 .151 hex, .400 wide M22520/5-37 B 11 .105 hex, .400 wide M22520/5-33 B Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Mounting Figures Connector Flanges Panel Cutouts (Panel Mounted Connectors) (Bulkhead Mounted Connectors) P.C. Board Drilling A dia. typ. C dia. typ. D dia. A B (CL ) typ. dia. C (CL ) typ. B (CL ) typ. B A square Figure 4-hole flanges A B 1/2 04 05 07 08 09 10 12 18 26 27 30 32 32A 33 34 36 39 40 45 91 91A Figure 1/2 11 / 16 11 / 16 11 / 16 11 / 16 11 / 16 3/4 1 1 1 1 1 1 1 3 / 32 1 3 / 16 1 3 / 16 1 3 / 16 2 .375 .375 C .360 .340 .500 .500 .500 .500 .500 .531 .718 .718 .718 .718 .718 .718 .812 .906 .906 .906 1.437 .250 .232 .089 .102 #3-56 tap .136 .125 .120 .109 .136 #6-32 tap #4-40 tap .166 .136 .136* .125 .150 #6-32 tap .152 .125 .257 .067 .093 * Countersunk to .245 dia. 51 54 55 57 59 62 63 65 66 67 68 D-Hole A B .755 .630 .630 .557 .505 .442 .407 .380 .319 .255 .195 (PCB traces are shown for illustrative purpose only, and are not representative of actual circuitry.) .723 .598 .583 .531 .473 .410 .362 .348 .292 .236 .176 Coaxial connectors Figure A B C D PCB01 PCB02 PCB03 PCB05 PCB06 PCB07 PCB08 .067 .045 .067 .067 .067 .045 .032 .400 .500 .300 .200 .200 .177 .100 .200 .250 .150 .100 .100 .088 .050 .045 .045 .035 .055 .045 .045 .032 .0625 A D 69 72 75 84 B (CL ) typ. .125 (CL ) Double D-Hole A B .755 .630 .380 .319 dia. typ. dia. typ. dia. B Figure A typ. .692 .536 .341 .278 C (CL ) typ. (PCB traces are shown for illustrative purpose only, and are not representative of actual circuitry.) Figure PCB04 Twinax Connectors A B C .045 .500 .250 D dia. typ. A dia. C B (CL ) A Figure 2-hole flanges Figure A B C D 92 92A 95 .223 .260 .640 .481 .481 1.015 .625 .625 1.30 .102 .102 .125 A1 Delta Electronics Mfg. Corp. Round Hole A 82 89 .255 .380 deltarf.com 978-927-1060 sales@deltarf.com D .045 Cable Groups Delta Cable Groups Group 1 2 3 Cable Group Finder Cable Cables 1B RG-228A 20 RG-6, 6A; M17/2 RG-8, 8A 2A RG-302 22 1C RG-143, 143A, 212, 222; M17/73, /112, /162 RG-9, 9A, B 3A RG-303 23 2A RG-8, 8A, 213; M17/74 RG-10 2B RG-11, 11A; M17/6 3A RG-9, 9A, 9B, 214; M17/75 3B 3C RG-11, 11A 15 2B RG-304 24 RG-316 9A 10 RG-12 15 RG-316DS RG-13A 3B RG-393 4 RG-13A, 216; M17/77 RG-14A 16 RG-400 6A RG-225; M17/127 RG-17A 17 RG-401 12 RG-18A 18 RG-402 13 RG-21, 21A 1A RG-405 14 RG-22, 22A, B 28 M17/2 1B RG-55A, 142, 142A, 223, 400; M17/60, /84, /128 RG-55, 55B 6B M17/6 2B 6B RG-55, 55B, 142B; M17/60, /84 RG-55A 6A M17/15 28 7A RG-59, 59A, 59B, 62, 62A, 62B, 62C, 210; M17/29, /30, /97 RG-58, 58A, C 5 M17/28 5 7B RG-71, 71A, 71B; M17/90 RG-59, 59A, B 7A M17/29 7A RG-62, 62A, B, C 7A M17/30 7A 8A RG-122; M17/54 RG-71, 71A, B 7B M17/45 27 8B RG-180, 180A, 180B, 195; M17/95, /137 RG-108, 108A 27 M17/73 1A 9A RG-174, 188, 188A, 316; M17/152 9B RG-179A, 179B, 187, 187A; M17/94, /136 RG-58, 58A, 58C, 141, 141A; M17/28, /111 6A 9 3C RG-6, 6A Group 1B 5 8 RG-225 RG-5, 5A, 5B, 21, 21A; M17/73, /162 RG-393; M17/127 7 Cable 1A 1A 4 6 Group RG-5, 5A, B RG-115A 19 M17/162 1A RG-118A 20 M17/112 1C 2A RG-122 8A M17/74 Double-Shielded RG-174, 316; M17/152 RG-126 21 M17/75 3A 11 RG-178, 178A, 178B, 196, 196A; M17/93 RG-141, 141A 5 M17/127 3C 12 .250" semi-rigid; RG-401; M17/129 RG-142, 142A 6A M17/77 3B 13 .141" semi-rigid; RG-402; M17/130 6B M17/60 6A 1C 14 .085" semi-rigid; RG-405; M17/133 RG-174 15 RG-10, 12, 215; M17/6, /74 RG-174DS 16 RG-14A, 217; M17/78, /165 17 RG-17A, 218 18 RG-18A, 219 19 RG-115A 20 RG-118A, 228A 21 RG-126 22 10 RG-142B RG-143, 143A M18/84 6A 9A M17/128 6A 10 M17/97 7A RG-178, 178A, B 11 M17/54 8A RG-179A, 179B 9B M17/95 8B RG-180, 180A, B 8B M17/137 8B RG-187, 187A 9B M17/152 9A RG-188, 188A 9A M17/93 11 M17/129 12 RG-195 RG-196, 196A 8B 11 M17/130 13 RG-210 7A M17/133 14 RG-302 RG-212 1C M17/78 16 23 RG-303 RG-213 2A M17/165 16 24 RG-304 RG-214 3A M17/176 30 25 Special 8X cable; contact factory for details. RG-215 15 AT&T 735A 31 RG-217 16 Belden 8281 26 26 Belden 8281 RG-218 17 Belden 9207 29 27 RG-108, 108A; M17/45 RG-219 18 Dearborn 6207 29 28 RG-22, 22A, 22B; M17/15 RG-222 1C IBM 7362211 29 29 Belden 9207; Dearborn 6207; IBM 7362211 RG-223 6A 30 M17/176 31 AT&T 735A A2 Delta Electronics Mfg. Corp. deltarf.com Note: MIL-PRF-39012 QPL connectors have cable groups defined by the MIL specification, not the Delta cable groups shown here. See page 185 for M39012 cable groups. 978-927-1060 sales@deltarf.com Ordering & Warranty Information Warranty We warrant our parts to be free of defects and workmanship for one year from purchase. During that time we will repair or replace (at our option) er's, or military installation costs. No other warranties apply, and no other liability may be assumed or extended by representatives or distributors. The terms of the applicable warranty or warranties, as the case may be, as set forth herein are the sole and exclusive warranty terms that shall have any any product order, resulting from the quotation and such terms and in lieu of all other warranties, expressed or implied, including the implied Returns Returns will be accepted only with a Return Authorization number issued by Delta, and are subject to inspection and acceptance upon arrival. Restocking charges will be determined prior to issusnce of Return Authorization. All claims for shortages must be made within 30 days of receipt by customer. Ordering Information Order changes, cancellation, or termination will be accepted only with written approval from Delta Electronics Manufacturing. or to sale. Copyright, Trademarks, & Patents Entire contents copyright 2017, Delta Electronics Manufacturing Corporation. Reproduction rights are hereby granted for, and sp urchasing procedures, by Delta customers only. Heli-Grip(R) , PressMount(R) , and Global Manufacturer logo are trademarks. The Heli-Grip design is covered by U.S. and foreign patents . Delta Electronics Manufacturing Corporation 416 Cabot Street, P.O. Box 53 Beverly, MA 01915 FSCM/CAGE 00795 A3 Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com Delta Electronics Mfg. Corp. www.deltarf.com 978-927-1060 sales@deltarf.com PO Box 53 416 Cabot St. Beverly, MA 01915