1143000N051-002 - DELTA ELECTRONICS

Delta type N connectors are medium size, 50 Ωimpedance connectors with 5⁄8"-24 threaded coupling. They are best

suited for use with cables in the range of .350" to .450" diameter, but are available for other cables with diameters from

.100" to over 1". Many of our N connectors are available as MIL-PRF-39012 QPL versions, and adapters as

MIL-PRF-55339 versions. These types are listed starting on page 190. Our extensive line of type N receptacles includes

conﬁgurations for virtually any packaging requirement, and we can supply any adapter or accessory you need to

complete your system design. Adapters between type N and other series are shown starting on page 176.

As with our other connector series, Delta’s customer-driven design results in N series connectors with practical and unique

features that make your design and assembly process easier. Some of these include:

•Heli-Grip cable connectors for fast, reliable assembly to ﬂexible cable without special tooling.

•One-Step cable connectors for quick, accurate assembly to semi-rigid cable.

•PressMount receptacles (page 85) mount securely in a single round hole, saving space on your components and

reducing your housing fabrication costs.

•Panel receptacles with ﬂange sizes to match the same hole pattern as standard SMA or BNC/TNC connectors, letting

you drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed.

•70 Ωimpedance N connectors (see page 89) for matched-impedance applications.

Our N series product line is still growing, so please call if you don’t see what you need.

Straight Cable Plugs ..................................................... 2

Right Angle Cable Plugs ............................................. 5

Tee Cable Plugs .............................................................. 6

Straight Cable Jacks ...................................................... 6

Bulkhead Cable Jacks ................................................... 8

Tee Bulkhead Cable Jacks........................................... 9

Panel Cable Jacks .......................................................... 11

Panel Jack Receptacles (square ﬂange) ................ 12

Panel Jack Receptacles (round ﬂange) ..................12

Dummy Receptacles ...................................................16

Right Angle Panel Jack Receptacles .....................16

Panel Plug Receptacles..............................................17

Bulkhead Jack Receptacles ......................................18

Stripline Receptacles ..................................................18

PressMount Receptacles............................................19

Resistive Terminations ................................................20

Dust Caps........................................................................ 20

In-Series Adapters ........................................................ 21

Electrical:

Nominal Impedance: 50 ohms.

Frequency Range: DC–11 GHz.

Voltage Rating: 1,000 volts RMS.

Dielectric Withstanding Voltage: 2,500 volts RMS.

Insulation Resistance: 5,000 megohms.

Materials/Finishes:

Insulators: Teﬂon per ASTM D1710.

Male Contacts: Brass per ASTM B16.

Female Contacts: Beryllium Copper per ASTM B196.

Contact Plating: Silver per ASTM B700, or

Gold per MIL-DTL-45204.

Gaskets: Silicone rubber per ZZ-R-765, Class II, Grade 50.

Other Metal Parts: Brass per ASTM B16, plated:

Silver per ASTM B700, or

Nickel per AMS-QQ-N-290.

All other speciﬁcations are in accordance with the

latest issues of MIL-PRF-39012, or MIL-A-55339, or other

applicable MIL speciﬁcations, and interfaces

are in accordance with MIL-STD-348.

.158

.168

.827 dia.

max.

.119

.124 dia.

.630 dia.

min.

.330 dia.

max.

COMPENSATING

RING OPTIONAL

SLOTS REQUIRED;

DESIGN OPTIONAL.

.625-24 UNEF-2B

.177 min. full thread

Reference Plane

.016/.060

.210/.230

.398/.412

Plug Interface**

.047

.077

.336

.344

.316

.320

.625-24 UNEF-2A

.627 dia.

max.

.422 min.

.172/.202

.047/.077 .119/.124

Reference Plane

.356/.362 .187/.207

Jack Interface**

**Some proportions altered to illustrate detail.

*These speciﬁcations

are typical and may

not apply to all

connectors. Detailed

speciﬁcations for

individual connectors

are available on

request.

N Connectors

General Description

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

N Conﬁgurations

N Speciﬁcations*

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

1 1 1.50 .750 Nickel Silver UG-18E/U A/01

1 1 1.50 .750 Nickel Silver (C)1101001N001-000 A/01

2, 3 1 1.80 .680 Nickel Silver UG-21B/U C/01

2, 3 1 1.50 .750 Nickel Gold UG-21D/U A/01

2, 3 1 1.50 .750 Nickel Gold UG-21E/U A/01

2, 3 1 1.50 .750 Nickel Gold UG-21G/U A/01

2, 3 1 1.50 .750 Nickel Silver (C)UG-1185/U A/01

2, 3 1 1.50 .750 Nickel Gold (C)UG-1185A/U A/01

2, 3 1 1.50 .750 Silver Gold (C)M39012/01-0005 * A/01

5, 6 2 1.41 .500 Nickel Silver UG-536B/U A/02

5, 6 2 1.41 .500 Nickel Gold UG-536C/U A/02

5, 6 2 1.41 .500 Nickel Gold (C)1101015N001-000 A/02

7 2 1.38 .500 Nickel Silver UG-603A/U A/02

7 2 1.38 .500 Nickel Silver (C)1101021N001-000 A/02

8 2 1.41 .500 Nickel Silver (C)1101043N001-000 A/02

9 2 1.38 .500 Nickel Silver 1101036N000-000 A/02

9 2 1.38 .500 Nickel Silver (C)1101036N001-000 A/02

15 3 2.42 .750 Nickel Silver UG-941B/U D/01

15 3 2.42 .750 Silver Gold (C)M39012/01-0125 * D/03

16 1 1.80 .880 Nickel Silver UG-204A/U C/02

16 1 1.80 .880 Silver Gold (C)M39012/01-0015 * A/01

20 3 3.09 1.31 Nickel Silver UG-557A/U D/02

25 2 1.38 .500 Nickel Silver 1101132N000-000 A/03

B dia.

Figure 3

(Includes armor clamp)

Figure 2

Figure 1

dia.

* Lockwire holes in coupling nut.

These designs allow the connectors to be tightened with a wrench for precise torquing of mated parts, and can be supplied

on any Delta type N plug. Please call for details of these options or any other special requirements you may have.

.812 hex .812 hex

.033 dia.

lockwire holes (3)

13/16 " hex coupling nut with lockwire holes

13/16 " hex coupling nut

See page 209 for cable groups. •Assembly procedures start on page 210.

N Cable Plugs

Straight Plug - Military Clamp For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Optional Type N Coupling Nut Examples

•

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

2 1 1.51 .630 Nickel Silver 1103002N000-000 B/01

2 1 1.55 .630 Nickel Gold (C)1103002N001-009 B/03

2 1 1.55 .600 Silver Gold (C)M39012/01B0007 * B/03

2 1 1.55 .600 Silver Gold (C)M39012/01-0502 * B/03

2B 1 1.55 .630 Nickel Silver 1103070N000-000 B/01

3A, 4 1 1.55 .630 Nickel Gold (C)1103004N001-001 B/03

3A, 4 1 1.51 .630 Nickel Silver 1103005N000-000 B/01

3A, 3C, 4 1 1.55 .600 Silver Gold (C)M39012/01B0008 * B/03

3A, 3C, 4 1 1.55 .600 Silver Gold (C)M39012/01-0501 * B/03

4 1 1.50 .630 Nickel Silver 1103079N000-000 B/01

5 2 1.43 .500 Nickel Silver 1103017N000-000 B/04

5 1 1.48 .500 Nickel Gold (C)1103017N001-000 B/05

6 2 1.43 .500 Nickel Silver 1103013N000-000 B/04

6 1 1.45 .500 Nickel Gold (C)1103018N001-000 B/03

6 1 1.45 .500 Silver Gold (C)M39012/01-0503 * B/03

7 2 1.43 .500 Nickel Silver 1103020N000-000 B/06

7 1 1.38 .500 Nickel Gold (C)1103020N001-000 B/03

Figure 1

(crimp sleeve)

Figure 2

(crimp sleeve)

* Lockwire holes in coupling nut.

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

1 1.50 .750 Nickel Gold (C)1101004N005-000 E/01

5, 6 §2 1.41 .500 Nickel Gold (C)1101015N005-000 E/02

RG-223 2 1.41 .500 Nickel Gold (C)1101015N005-001 E/02

7 2 1.38 .500 Nickel Gold (C)1101021N005-000 E/02

24 1 1.50 .750 Nickel Gold (C)1101052N005-000 E/01

26 1 1.50 .750 Nickel Gold (C)1101108N005-000 E/01

Heli-Grip®Cable Attachment

These connectors have captivated contacts and allow

rapid, easy assembly—simply trim the cable, slide into

the cone/insulator/contact assembly (left), solder the

center conductor to the contact, and screw body

assembly (right) onto cable assembly.

Figure 1 Figure 2

B dia.

See page 209 for cable groups. •Assembly procedures start on page 210.

N Cable Plugs

Straight Plug - Crimp Type For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Straight Plug - Heli-Grip® For Flexible Cable

•

11.50 .750 Nickel Gold (C)1101004N005-006 E/01

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

12 1 1.50 .500 Nickel Silver 1101050N000-000 F/03

12 2 .960 .254 Mixed(1)Silver 1101050N003-000 ***

12 4 1.44 .254 Silver Gold (C)1101050A003-007 I/01

13 1 1.41 .500 Nickel Silver 1101031N003-000 F/01

13 2 .960 .143 Mixed(1)Gold 1101031N003-001 ***

13 2 .960 .143 Mixed(2)Gold 1101031K00M-000 ***

13 3 .960 .143 Silver Gold ( C)1101031A003-008 I/01

13 4 .960 .143 Silver Gold ( C)1101031A003-012 I/01

14 1 1.41 .500 Nickel Silver 1101025N003-000 F/02

Figure 1

(Solder-clamp; gold-plated

ferrule, nickel-plated body)

B dia.

Figure 2

(Direct solder; gold-plated body, nickel (1)

or passivated(2)coupling nut)

B (I.D. )

Figure 4

(One-Step cable attachment, hex coupling nut)

B (I.D. )

.812 hex

Figure 3

(One-Step cable attachment, standard coupling nut)

B (I.D. )

Solder

Cable Delta “One-Step” connectors feature captivated

contacts and insulators to allow rapid, easy assembly

to semi-rigid cable—simply trim the cable jacket and

dielectric ﬂush, chamfer the center conductor, insert

into the connector, and solder the jacket to the

connector body.

(1)Brass body and coupling nut.

(2)Stainless steel body and coupling nut.

See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.

N Cable Plugs

Straight Plug - For Semi-Rigid Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Delta One-Step Cable Attachment Straight Plugs - For Semi-Rigid Cable

•

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B C Body Contact Trim Code

2, 3 1 1.47 1.88 .750 Nickel Silver (C)UG-594B/U A/01

2, 3 3 1.36 1.66 .750 Silver Gold (C)M39012/05-0101 A/07

2, 3 3 1.39 1.66 .750 Nickel Gold 1105004N000-000 A/04

5 3 1.39 2.00 .750 Nickel Gold (C)1104032N001-000 A/08

5, 6 2 1.55 1.28 .500 Nickel Silver (C)1105015N000-000 A/11

5, 6 3 1.35 1.55 .560 Nickel Silver (C)1105015N001-000 A/09

7 2 1.55 1.28 .500 Nickel Silver (C)1105021N000-000 A/11

9 2 1.55 1.28 .500 Nickel Silver (C)1105036N001-000 A/11

19 3 1.36 1.66 .750 Nickel Silver (C)1104027N001-000 A/07

Figure 1

(Mitered body)

Figure 2

(Cube body with access cap)

C dia.

Figure 3

(Cube body)

C dia.

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B C Body Contact Trim Code

2 1 1.39 1.77 .750 Nickel Silver 1107002N000-000 B/07

2 2 1.39 1.25 .— Nickel Silver (C)1107002N000-001 B/09

3 1 1.39 1.77 .750 Nickel Silver 1107005N000-000 B/07

2 3 1.41 2.30 .687 Nickel Gold (C)1107002N001-002 B/30

3 3 1.41 2.30 .687 Nickel Gold (C)1107004N001-002 B/30

6 3 1.41 2.25 .687 Nickel Gold (C)1107034N001-001 B/08

Figure 1

(Cube body)

Figure 2

(Cube body with access cap)

C dia.

Figure 3

(Mitered body)

C dia.

See page 209 for cable groups. •Assembly procedures start on page 210.

N Cable Plugs

Right Angle Plug - Military Clamp For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Right Angle Plug - Crimp For Flexible Cable

•

Figure 1

(Crimp type for

ﬂexible cable)

Figure 2

(Direct solder for

semi-rigid cable)

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

2 1 1.39 2.00 Silver Silver (C)1185002A000-000 B/16

3 1 1.39 2.00 Silver Silver (C)1185004A000-002 B/16

6 1 1.39 1.82 Silver Silver (C)1185013A001-000 B/17

7 1 1.39 1.82 Silver Silver (C)1185019A000-000 B/17

9 1 1.39 1.82 Silver Silver (C)1185036A000-000 B/17

13 2 1.39 .900 Silver Silver (C)1185031A000-000 ***

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

1 1 1.56 .750 Nickel Silver UG-20E/U A/01

1 1 1.67 .750 Silver Gold (C)M39012/02-0101 A/01

2, 3 1 1.56 .750 Nickel Silver UG-23D/U A/01

2, 3 1 1.56 .750 Nickel Gold UG-23F/U A/01

2, 3 1 1.56 .750 Nickel Silver (C)UG-1186/U A/01

2, 3 1 1.56 .750 Nickel Silver (C)UG-1186A/U A/01

2, 3 1 1.67 .750 Silver Gold (C)M39012/02-0003 A/01

5, 6 2 1.41 .500 Nickel Silver 1108015N000-000 A/05

5, 6 2 1.47 .500 Nickel Silver (C)1108015N001-000 A/02

7 2 1.41 .500 Nickel Silver UG-602A/U A/02

7 2 1.27 .500 Nickel Silver 1108000N000-003 * —

7 2 1.47 .500 Nickel Silver (C)1108021N001-000 A/02

15 3 2.25 .750 Nickel Silver UG-940B/U D/03

19 1 1.56 .750 Nickel Gold (C)1108027N001-000 A/12

22 1 1.87 .690 Nickel Gold 1108123N000-000 C/03

B dia.

Figure 3

(Includes armor clamp)

Figure 2

Figure 1

B dia.

*UG-602A/U less clamping hardware.

See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.

N Cable Plugs / Jacks

Tee Plug - For Flexible & Semi-Rigid Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Straight Jack - Military Clamp For Flexible Cable

•

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

2 1 1.64 .600 Silver Gold (C)M39012/02B0008 B/10

2 1 1.64 .600 Silver Gold (C)M39012/02-0502 B/03

2 1 1.47 .500 Nickel Gold 1110002N000-000 B/10

2 1 1.60 .630 Nickel Gold (C)1110002N001-000 B/11

3 1 1.64 .600 Silver Gold (C)M39012/02B0009 B/10

3 1 1.64 .600 Silver Gold (C)M39012/02-0501 B/03

3 1 1.47 .500 Nickel Gold 1110005N000-000 B/10

3 1 1.60 .630 Nickel Gold (C)1110005N001-000 B/10

6 1 1.56 .500 Nickel Gold 1110013N000-001 B/12

6 1 1.54 .500 Silver Gold (C)M39012/02-0503 B/03

Figure 1

(crimp sleeve)

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

2, 3 1 1.63 .750 Nickel Gold (C)1108004N005-002 E/01

5, 6 §2 1.41 .500 Nickel Gold (C)1108018N005-002 E/02

RG-223 2 1.41 .500 Nickel Gold (C)1108015N005-000 E/02

7 2 1.41 .500 Nickel Gold (C)1108019N005-002 E/02

8 2 1.41 .500 Nickel Gold (C)1108029N005-001 E/02

9 2 1.41 .500 Nickel Gold (C)1108037N005-002 E/02

§Except RG-223/U.

B dia.

dia.

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

12 1 1.07 .254 Silver Gold 1108050A003-003 ***

13 2 1.00 .143 Silver Gold 1108031A003-000 ***

Figure 1

B (I.D. )

Figure 2

(I.D. )

See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.

N Cable Jacks

Straight Jack - Crimp Type For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Straight Jack - Heli-Grip® For Flexible Cable

Figure 1 Figure 2

Straight Jack - For Semi-Rigid Cable

•

Cable Fig. Dimensions Mounting Max. Plating Delta P/N

Group A B C D Figure Panel Body Contact

1 1 1.75 .920 .750 .900 72 .250 Silver Gold (C)M39012/03-0101 A/01

2, 3 1 1.75 .920 .750 .875 72 .250 Nickel Silver UG-160D/U A/01

2, 3 1 1.84 .920 .750 .812 72 .250 Nickel Silver (C)1116003N721-000 ***

2, 3 1 1.75 .920 .750 .875 72 .250 Nickel Gold 1116004N720-001 A/01

5, 6 2 1.67 .920 .500 .812 72 .250 Nickel Silver UG-556B/U A/06

5, 6 2 1.67 .920 .500 .875 72 .250 Nickel Gold (C)1116015N721-000 A/02

7 2 1.47 .920 .500 .875 72 .250 Nickel Silver 1116021N720-000 A/14

7 2 1.47 .920 .500 .875 72 .250 Nickel Gold (C)1116021N721-000 A/14

9 2 1.48 .920 .500 .875 72 .250 Nickel Silver (C)1116036N721-000 A/10

10 2 1.48 .920 .500 .875 72 .250 Nickel Silver (C)1116100N721-000 A/10

11 2 1.48 .920 .500 .875 72 .250 Nickel Silver (C)1116038N721-000 A/10

16 1 1.90 .920 .880 .875 72 .250 Silver Gold (C)M39012/03-0102 A/01

Figure 1

(Rear mount)

Figure 2

(Rear mount)

D dia.

C dia.

D dia.

Assembly

Procedure/

Trim Code

Figure 1

(Rear mount)

BD dia.

(crimp sleeve)

Cable Fig. Dimensions Mounting Max. Plating Delta P/N

Group A B C D Figure Panel Body Contact

2 1 1.84 .920 .600 .875 72 .250 Silver Gold (C)M39012/03B0004 B/03

2 1 1.84 .920 .600 .875 72 .250 Silver Gold (C)M39012/03-0502 B/03

3 1 1.84 .920 .600 .875 72 .250 Silver Gold (C)M39012/03B0005 B/03

3 1 1.84 .920 .600 .875 72 .250 Silver Gold (C)M39012/03-0501 B/03

6 1 1.74 .950 .500 .875 72 .250 Nickel Gold (C)1119013N721-000 B/13

6 1 1.74 .920 .500 .875 72 .250 Silver Gold (C)M39012/03-0503 B/03

7 1 1.59 .920 .500 .812 72 .250 Nickel Silver 1119020N720-000 B/14

9 1 1.45 .880 .440 .812 72 .250 Nickel Silver (C)1119036N721-000 B/15

10 1 1.45 .880 .440 .812 72 .250 Nickel Gold (C)1119100N721-000 B/15

Assembly

Procedure/

Trim Code

See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions

See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact.

See page 6 for alternate body plating information.

N Cable Jacks

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Bulkhead Jack - Military Clamp For Flexible Cable

Bulkhead Jack - Crimp Type For Flexible Cable

•

Cable Fig. Dimensions Mounting Max. Plating Delta P/N

Group A B C Figure Panel Body Contact

2, 3 1 1.84 .920 .750 72 .250 Nickel Gold (C)1116004N725-000 E/01

5, 6 §2 1.69 .920 .500 72 .250 Nickel Gold (C)1116015N725-000 E/03

RG-223 2 1.69 .920 .500 72 .250 Nickel Gold (C)1116015N725-001 E/03

7 2 1.69 .920 .500 72 .250 Nickel Gold (C)1116021N725-000 E/03

10 2 1.69 .920 .500 72 .250 Nickel Gold (C)1116100N725-000 E/03

Figure 1

.812 dia.

dia.

Assembly

Procedure/

Trim Code

§Except RG-223/U.

Heli-Grip®Cable Attachment

Figure 2

C dia.

.812 dia.

These connectors have captivated contacts and allow

rapid, easy assembly—simply trim the cable, slide into

the cone/insulator/contact assembly (left), solder the

center conductor to the contact, and screw body assembly

(right) onto cable assembly.

Cable Fig. Dimensions Mounting Max. Plating Delta P/N

Group A B C Figure Panel Body Contact

2 1 1.40 2.00 .750 55 .100 Silver Silver (C)1185002A551-000 B/16

3 1 1.40 2.00 .750 55 .100 Silver Silver (C)1185004A551-000 B/16

6 1 1.38 1.89 .750 55 .100 Silver Silver (C)1185013A551-000 B/17

7 1 1.38 1.89 .750 55 .100 Silver Silver (C)1185019A551-000 B/17

9 1 1.38 1.89 .750 55 .100 Silver Silver (C)1185036A551-000 B/17

13 2 1.38 .900 .750 55 .100 Silver Silver (C)1185031A551-000 ***

Assembly

Procedure/

Trim Code

Figure 1

(Crimp type for

ﬂexible cable)

Figure 2

(Direct solder for

semi-rigid cable)

.675

C dia.

.675

C dia.

See page 209 for cable groups. •Assembly procedures start on page 210.

*** Contact factory for cable assembly instructions. •See page 208 for mounting dimensions.

N Cable Jacks

Bulkhead Jack - Heli-Grip® For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Tee Bulkhead Jack - For Flexible & Semi-Rigid Cable

•

Figure 2

(Solder-clamp; gold-plated ferrule,

nickel-plated body)

C dia.

.812 dia.

Figure 4

(One-Step cable attachment)

C (I.D. )

.875 dia.

Figure 1

(Collet clamp [solderless] cable attachment, captive contact in body)

.812 dia.

Backnut Collet Ferrule

O-ring

Solder

Cable

Delta “One-Step” connectors feature captivated

contacts and insulators to allow rapid, easy

assembly to semi-rigid cable—simply trim the

cable jacket and dielectric ﬂush, chamfer the

center conductor, insert into the connector, and

solder the jacket to the connector body.

Figure 3

(Direct solder)

.812 dia.

C (I.D. )

Cable Fig. Dimensions Mounting Max. Plating Delta P/N

Group A B C Figure Panel Body Contact

12 1 1.55 .889 .500 72 .250 Nickel Gold (C)1116163N721-000 ***

13 2 1.67 .922 .500 72 .250 Nickel Gold 1116031N720-000 F/04

13 3 1.33 .884 .145 72 .250 Nickel Gold 1116031N723-001 ***

13 4 1.38 .922 .143 72 .250 Silver Gold (C)1116031A723-003 I/01

14 2 1.67 .922 .500 72 .250 Nickel Gold 1116025N723-000 F/04

14 3 1.33 .884 .090 72 .250 Nickel Gold 1116025N723-001 ***

14 4 1.38 .922 .088 72 .250 Silver Gold (C)1116025A723-002 I/01

Assembly

Procedure/

Trim Code

See page 209 for cable groups. •Assembly procedures start on page 210.

*** Contact factory for cable assembly instructions. •See page 208 for mounting dimensions.

N Cable Jacks

Bulkhead Jack - For Semi-Rigid Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

•

Delta One-Step Cable Attachment - For Semi-Rigid Cable

One-Step Cable Attachment

Cable Fig. Dimensions Mounting Plating Delta P/N

Group A B C Figure Body Contact

1 1 1.67 .660 .750 33 Silver Gold (C)M39012/02-0104 A/01

2, 3 11.58 .660 .750 33 Nickel Silver UG-22D/U A/01

2, 3 11.58 .660 .750 33 Nickel Gold UG-22F/U A/01

2, 3 11.58 .660 .750 33 Nickel Silver (C)UG-1187/U A/01

2, 3 11.58 .660 .750 33 Nickel Silver (C)UG-1187A/U A/01

2, 3 11.67 .660 .750 33 Silver Gold (C)M39012/02-0006 A/01

5, 6 21.41 .660 .500 33 Nickel Silver UG-1095B/U A/13

5, 6 21.41 .660 .500 33 Nickel Gold UG-1095C/U A/13

5, 6 21.41 .660 .500 27 Nickel Silver 1111015N270-000 A/13

5, 6 21.48 .660 .500 27 Nickel Gold (C)1111015N271-000 A/02

5, 6 21.41 .660 .500 33 Nickel Silver (C)1111015N331-000 A/02

7 2 1.41 .660 .500 33 Nickel Silver UG-593A/U A/14

9 2 1.44 .660 .500 33 Nickel Silver 1111036N330-000 A/16

9 2 1.48 .660 .500 33 Nickel Silver (C)1111036N331-000 A/15

19 1 1.56 .660 .750 33 Nickel Gold (C)1111027N331-000 A/12

22 1 1.87 .660 .690 30 Nickel Gold 1111123N300-000 C/03

Assembly

Procedure/

Trim Code

Figure 1

C dia.

Heli-Grip ®Cable Attachment (where noted)

Figure 2

C dia.

These connectors have captivated contacts and allow

rapid, easy assembly—simply trim the cable, slide into

the cone/insulator/contact assembly (left), solder the

center conductor to the contact, and screw body assembly

(right) onto cable assembly.

§Except RG-223/U.

Cable Fig. Dimensions Mounting Plating Delta P/N

Group A B C Figure Body Contact

2, 3 1 1.58 .660 .750 33 Nickel Gold (C)1111004N335-000 E/01

§5, 6 §2 1.41 .660 .500 33 Nickel Gold (C)1111015N335-000 E/03

RG-223 2 1.41 .920 .500 33 Nickel Gold (C)1111015N335-001 E/03

7 2 1.41 .660 .500 33 Nickel Gold (C)1111021N335-000 E/03

9 2 1.41 .660 .500 33 Nickel Gold (C)1111037N335-001 E/03

10 2 1.41 .660 .500 33 Nickel Gold (C)1111100N335-001 E/03

Assembly

Procedure/

Trim Code

See page 209 for cable groups. •Assembly procedures start on page 210. •See page 208 for mounting dimensions.

N Cable Jacks

Panel Jack - For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Military Clamp For Flexible Cable

Heli-Grip For Flexible Cable

•

Figure 2

(Contact and insulator captive in backnut)

Figure 1

(Standard crimp type)

Backnut/crimp tail

Crimp sleeve Captive

contact

Captive

insulator

Cable Fig. Dimensions Mounting Plating Delta P/N

Group A B C Figure Body Contact

2 1 1.64 .660 .600 33 Silver Gold (C)M39012/02-0512 B/03

3 1 1.64 .660 .600 33 Silver Gold M39012/02-0511 B/03

5 2 1.19 .595 .500 33 Nickel Silver (C)1155017N331-000 ***

6 2 1.19 .595 .500 33 Nickel Silver (C)1155013N331-000 ***

6 1 1.54 .660 .500 33 Silver Gold M39012/02-0513 B/03

9 2 1.16 .595 .380 33 Nickel Silver (C)1155037N331-000 ***

Assembly

Procedure/

Trim Code

Figure 1

(Solder-clamp; gold-plated ferrule,

nickel-plated body)

C dia.

Figure 2

(One-Step cable attachment—see page 76 for details)

Figure 3

(One-Step cable attachment—see page 76 for details)

C (I.D. )

Cable Fig. Dimensions Mounting Plating Delta P/N

Group A B C Figure Body Contact

13 1 1.41 .660 .500 33 Nickel Gold 1111031N333-001 F/05

13 2 1.11 .660 .143 09 Silver Gold (C)1111031A091-001 I/01

13 3 1.07 .640 .143 33 Silver Gold (C)1111031A333-004 I/01

14 1 1.41 .660 .500 33 Nickel Gold 1111025N333-000 F/05

14 2 1.11 .660 .088 09 Silver Gold (C)1111025A091-001 I/01

14 3 1.07 .640 .088 33 Silver Gold (C)1111025A333-002 I/01

Assembly

Procedure/

Trim Code

See page 209 for cable groups. •Assembly procedures start on page 210.

*** Contact factory for cable assembly instructions. •See page 208 for mounting dimensions.

N Cable Jacks

Panel Jack - Crimp Type For Flexible Cable

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Panel Jack - For Semi-Rigid Cable

(C)

•

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 1.13 .660 .100 .080 33 Nickel Silver (C)UG-58A/U

1 1.13 .660 .100 .080 33 Silver Gold (C)M39012/04-0002

1 1.13 .660 .100 .050 18 Nickel Silver (C)1113000N181-000

1 1.13 .660 .100 .080 32A Nickel Silver (C)1113000N321-002

1 1.13 .660 .100 .080 32 Nickel Gold (C)1113000N321-003

1 1.13 .660 .100 .080 33 Silver Gold (C)1113000A331-011

1 1.13 .660 .100 .080 33 Nickel Gold (C)1113000N331-011

1 1.13 .660 .100 .080 95 Nickel Silver (C)1113000N951-000

2 .735 .075 .125 .250 09 Nickel Silver (C)1113000N091-002

3 1.13 .660 .100 .080 33 Nickel Gold (C)1113000N331-009

(11/16 " square ﬂange, interchangeable with

BNC and TNC standard ﬂange size)

Dimensions Plating

C (I.D. )

.162 dia.

.050 dia.

.032

(I.D. )

Figure 3

Figure 1

Figure 2

C (I.D. )

Figure Delta P/N

A B C D E Body Contact

1 1.25 .660 .100 .175 1.50 Nickel Silver (C)1113000N911-002

1 1.25 .660 .100 .125 1.25 Nickel Gold (C)1113000N911-005

2 1.13 .660 .100 .110 .575 Nickel Silver (C)1120000N831-000

Figure 1

C (I.D. )

E dia.

Figure 2

C (I.D. )

E dia.

See page 6 for alternate body plating information. •All items are available with other ﬂange sizes and contact conﬁgurations.

N Receptacles

Panel Jack Receptacle -Solder Pot Contact

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

•

Panel Jack Receptacle - Solder Pot Contact

Round Flange (For Solder Or Setscrew Mounting)

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 .735 .050 .086 .012/.017 09 Nickel Gold (C)*1143000N091-002

1 .735 .050 .086 .036 09 Nickel Gold (C)*1143000N091-003

1 .735 .050 .086 .007/.012 09 Nickel Gold (C)*1143000N091-004

1 .735 .050 .050 .012/.017 09 Nickel Gold (C)*1143000N091-009

2 .736 .080 .050 .012/.017 33 Nickel Gold (C)*1143000N330-010

2 .736 .080 .050 .026/.030 33 Nickel Gold (C)*1143000N331-017

2 .736 .080 .050 .020/.025 33 Nickel Gold (C)1143000N331-023

2 .735 .080 .050 .026/.030 33 Nickel Gold (C)1143000N331-054

2 .736 .080 .050 .012/.017 33 Nickel Gold (C)1143000N331-055

Figure 1

(11/16 " square ﬂange, interchangeable

with BNC and TNC standard ﬂange size)

Figure 2

.075

C dia.

slot

width

slot

width

.120

dia.

*Epoxy-captivated contact.

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 .736 .080 .195 .350 33 Nickel Gold (C)*1143000N330-012

2 .736 .080 .100 .005/.008 33 Silver Gold (C)* 1158000A331-012

3 .735 .075 .050 .004/.006 09 Silver Gold (C)* 1158000A091-023

Figure 1

Figure 3

(11/16 " square ﬂange, interchangeable

with BNC and TNC standard ﬂange size)

Tab

.005/.010

thick x

.120 wide

.384 dia.

Tab

D thick x

.050 wide

*Epoxy-captivated contact.

Figure 2

Tab

D thick x

.120 wide

•See page 6 for alternate body plating information. •All items are available with other ﬂange sizes and contact conﬁgurations.

N Receptacles

Panel Jack Receptacle -Slotted Contact

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Panel Jack Receptacle -Tab Contact

•

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 .736 .080 .660 .560 33 Nickel Gold (C)1113000N331-028

2 .735 .075 .125 .250 09 Nickel Silver (C)1143000N091-018

2 .735 .075 .125 .250 09 Nickel Gold (C)1143000N091-030

2 .735 .075 .590 .705 09 Nickel Gold (C)*1143000N091-069

3 .736 .080 .590 .705 33 Nickel Gold 1143000N330-018

3 .736 .080 .590 .705 33 Nickel Gold (C)*1158000N331-015

4 .814 .080 .590 .705 05 Nickel Gold (C)1143000N051-002

5 .735 .075 .200 .450 09 Nickel Gold (C)1143000N091-059

5 .735 .075 .750 .875 09 Nickel Gold (C)1143000N091-073

5 .735 .075 .375 .425 09 Nickel Gold (C)* 1143000N091-075

(11/16 " square ﬂange, interchangeable with

BNC and TNC standard ﬂange size)

.120 dia.

.162 dia.

.050 dia.

Figure 3

Figure 1

Figure 2

.120 dia.

.384 dia.

Figure 4

(1/2" square ﬂange, interchangeable

with SMA standard ﬂange size)

.162 dia.

.050 dia.

Figure 5

(O-ring seal on ﬂange, 11/16 " square ﬂange,

interchangeable with BNC and TNC standard ﬂange size)

.162 dia.

O-ring

.050 dia.

*Epoxy-captivated contact.

•See page 6 for alternate body plating information. •All items are available with other ﬂange sizes and contact conﬁgurations.

•

N Receptacles

Panel Jack Receptacle - Post Contact

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 1.41 1.16 .300 .101 33 Nickel Silver (C)UG-997A/U

1 1.41 1.16 .300 .101 33 Nickel Gold (C)1115000N330-005

2 1.41 1.16 .750 .120 33 Nickel Silver (C)1115000N330-009

3 1.41 .830 .560 .120 33 Nickel Gold (C)1115000N330-012

4 1.41 1.17 .050 .020/.025 33 Nickel Silver (C)1115000N330-011

D (I.D. )

D dia.

Figure 3

Figure 1 Figure 2

D dia.

Figure 4

slot

width

.120

dia.

Dimensions Mounting Figure Plating Delta P/N

—

Nickel

33.080.740 1163000N330-000

•See page 6 for alternate body plating information. •All items are available with other ﬂange sizes and contact conﬁgurations.

N Receptacles

Right Angle Panel Jack Receptacle

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Dummy Receptacle

•

Body Contact

Figure 1

(Solder pot

contact)

C (I.D. )

slot

width

.120

dia.

.050 dia.

slot

width

.162 dia.

.050 dia.

D dia.

Tab

D thick x

.065 wide

Figure 2

(Slotted

contact)

Figure 3

(Slotted

contact)

Figure 4

(Tab

contact)

Figure 6

(Post

contact)

Figure 5

(Post

contact)

.120 dia.

.384 dia.

Figure 7

(Post contact)

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 1.10 .080 .101 .720 33 Nickel Silver (C)1123000N330-000

1 1.10 .080 .101 .720 33 Nickel Gold (C)1123000N330-004

2 .780 .080 .050 .012/.017 33 Nickel Gold (C)1159000N330-001

2 .810 .080 .050 .012/.017 33 Nickel Gold (C)1159000N330-013

2 .810 .080 .050 .026/.030 33 Nickel Gold (C)*1159000N331-026

3 1.17 .075 .050 .020 09 Nickel Gold (C)*1159000N091-004

4 .810 .080 .100 .005/.008 33 Nickel Gold (C)*1159000N331-009

5 .810 .080 .360 .120 33 Nickel Gold (C)1123000N330-002

6 1.17 .075 .125 .250 09 Nickel Gold (C)1159000N091-010

7 .810 .080 .590 1.10 33 Nickel Gold (C)*1159000N331-006

7 .810 .080 .330 .488 33 Nickel Gold 1159000N330-011

7 .810 .080 .330 .488 33 Nickel Gold (C)*1159000N331-000

*Epoxy-captivated contact.

•See page 6 for alternate body plating information. •All items are available with other ﬂange sizes and contact conﬁgurations.

N Receptacles

Panel Plug Receptacles

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

•

Figure Dimensions Max. Mounting Plating Delta P/N

A B C Panel Figure Body Contact

1 1.62 .707 .099 .100 72 Nickel Silver (C)UG-680/U

1 1.62 .707 .099 .100 72 Nickel Silver (C)UG-680A/U

1 1.62 .707 .099 .100 72 Silver Gold (C)M39012/04-0001

2 1.53 .919 .099 .250 72 Nickel Silver (C)1121000N728-005

3 1.25 .606 .099 .100 59 Nickel Silver (C)1120000N590-000

3 1.25 .606 .099 .100 59 Nickel Gold (C)1120000N590-004

4 1.15 .562 .099 .100 ** Nickel Silver (C)1120000N591-000

Figure 1

(Front mount, hermetically sealed, with mounting gasket)

Figure 4

(Front mount, no gasket, screw-in type

for 9/16 –24 tapped hole)

Figure 3

(Front mount, no gasket)

Figure 2

(Rear mount, hermetically sealed, with mounting gasket)

.812 dia.

C (I.D. )C (I.D. )

.812 dia.

C (I.D. )

Figure Delta P/N

A B C D E F G H Body Contact

1 #2-56 .250 7 .560 #0-80 .125 .734 .422 Nickel Silver 1156000N000-000

1 .078 .313 7 .500 .063 .156 .734 .656 Nickel Silver 1156000N000-002

1 #2-56 .250 7 .560 #2-56 .125 .734 .422 Nickel Silver 1156000N000-003

2 #2-56 .125 10 .734 .125 .010 .816 .125 Nickel Silver 1157000N000-003

Socket contact E dia. x F deep

C holes, A dia. x B deep

D dia. b.c.

.750

dia.

.120 dia.

.140 dia.

.875 dia.

dia. b.c.

holes,

dia.

x B

deep

See page 208 for mounting dimensions. •All items are available with other ﬂange sizes and contact conﬁgurations.

N Receptacles

Bulkhead Jack Receptacles

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Dimensions Plating

Figure 1 Figure 2

Stripline Receptacles

•

Component housing

Internal

Circuitry

These connectors eliminate the need for complicated mounting hole patterns and mounting

hardware. They are simply pressed into a single through hole, and the precisely-engineered

knurled mounting section provides retention strength far greater than normal mating and

unmating forces.

An integral shoulder provides a positive stop when mounting.

PressMounts can be used in packages as small as the outer diameter of the connector body.

Figure Dimensions Min. Mounting Plating Delta P/N

A B Panel Hole Body Contact

1 .110 .050 .200 .450 ±.001 dia. Nickel Gold (C)1120000N911-002

2 .100 .005/.008 .200 .450 ±.001 dia. Nickel Gold (C)1120000N911-003

3 .285 .100 .200 .450 ±.001 dia. Nickel Gold (C)1120000N911-004

Figure 1

(Post contact)

.587

.25

.625 dia. A

B dia.

.454

dia. over knurl

Figure 2

(Tab contact)

.587

.625 dia. A

Tab

B thick x

.120 wide

.25

.454

dia. over knurl

Figure 3

(Solder pot contact)

.587

.25

.625 dia. A

.120 dia.

C (I.D. )

.454

dia. over knurl

Figure Dimensions Min. Mounting Plating Delta P/N

A B Panel Hole Body Contact

1 .110 .050 .200 .450 ±.001 dia. Nickel Gold (C)1124000N911-001

2 .100 .005/.008 .200 .450 ±.001 dia. Nickel Gold (C)1124000N911-002

3 .250 .100 .200 .450 ±.001 dia. Nickel Gold (C)1124000N911-000

Figure 1

(Post contact)

.25

B dia.

.95

.454

dia. over knurl

Figure 2

(Tab contact)

.25

.95

.454

dia. over knurl

Tab

B thick x

.120 wide

Figure 3

(Solder pot contact)

.120 dia.

C (I.D. )

.25

.95

.454

dia. over knurl

All items are available with other ﬂange sizes and contact conﬁgurations.

Delta PressMount Receptacles

N Receptacles

Press Mount Jack Receptacles

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Press Mount Plug Receptacles

•

Resistor Dimensions Features Plating Delta P/N

ContactBodyCBA

50 Ω±1%, 1 Watt 1.78 .—.— No chain Nickel Silver (C)1151000N000-003

50 ΩGold441.00.578.1ttaW 1 ,%1± (C)1151000N000-010

51 Ω±5%, 1/2441.05.316.1ttaW (C)1131000N000-000

51 Ω±5%, 1/2Watt 1.67 .—.— No chain Nickel Silver (C)1131000N00A-000

51 Ω441.57.378.1ttaW 1 ,%5± (C)1151000N000-000

75 ΩGold441.00.578.1ttaW 1 ,%1± (C)1151000N000-011

C (I.D. )

Figure Dimensions Features Plating Delta P/N

ContactBodyCBA

1 .560 2.25 .144 Bead chain Nickel — MX-913/U

1 .560 2.50 .144 Bead chain Silver — M39012/25-0011

1 .560 3.75 .635 Safety chain Silver — M39012/25-0012

1 .840 2.50 .170 Bead chain / shorting type Nickel Silver (C)1132000N00C-002

2 .720 3.50 .144 Bead chain Nickel — 1133000N000-000

2 .910 2.50 .170 Bead chain / shorting type Nickel Silver (C)1133000N00C-000

Figure 1

(Shown with safety chain)

Figure 2

(Shown with bead chain)

Caps and terminations are available with other chain styles and/or resistances.

N Accessories

Resistive Plug Termination

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Dust Caps

Silver

Nickel

•

Figure Dimensions Max. Mounting Plating Delta P/N

A B Panel Figure Body Contact

1 1.54 .863 .250 72 Nickel Silver (C)UG-30D/U

1 1.54 .863 .250 72 Nickel Silver (C)UG-30E/U

1 1.54 .863 .250 72 Silver Gold (C)M55339/04-00030

1 2.06 1.375 .750 72 Nickel Silver (C)1126000N728-000

2 1.75 1.00 .— 33 Nickel Silver (C)1125000N330-000

.875 dia.

Figure 1

(Bulkhead mount, hermetically sealed)

Figure 2

(Panel mount)

Figure Delta P/N

A B Body Contact

1 1.75 .660 Nickel Silver (C)UG-29B/U

1 1.75 .660 Silver Gold (C)M55339/07-00029

2 1.59 .780 Nickel Silver (C)UG-57B/U

2 1.59 .780 Silver Gold (C)M55339/05-00057 *

3 1.56 .780 Nickel Silver (C)1134000N000-000

Dimensions Plating

dia.

B dia.

dia.

Figure 1

(Straight jack–jack;

connects two plugs)

Figure 2

(Straight plug–plug;

connects two jacks)

Figure 3

(Straight jack–plug;

connects one plug

and one jack)

* Lockwire holes in coupling nut.

See page 6 for alternate body plating information.

N Adapters

Bulkhead & Panel Mounted Jack - Jack Adapters (Connect Two Plugs)

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Straight Adapters

.875 dia.

.92

Figure 1

(Right angle plug–jack;

connects one plug

and one jack)

Figure 2

(Right angle plug–plug;

connects two jacks)

Figure 3

(Bulkhead mounted right angle jack–jack;

connects two plugs)

Figure Dimensions Max. Mounting Plating Delta P/N

A B Panel Figure Body Contact

1 1.30 1.38 .—.— Nickel Silver (C)UG-27C/U

1 1.30 1.38 .—.— Nickel Gold (C)UG-27D/U

1 1.30 1.38 .—.— Silver Gold (C)M55339/03-00027 *

2 1.39 1.39 .—.— Nickel Silver (C)1137000N000-000

3 2.13 1.36 .250 72 Nickel Gold (C)UG-202A/U

* Lockwire holes in coupling nut.

Figure PlatingDimensions Delta P/N

A B Body Contact

1 1.75 1.22 Nickel Silver (C)UG-28A/U

1 1.75 1.22 Silver Gold (C)M55339/06-00028

2 1.75 1.47 Nickel Silver (C)UG-107B/U

2 1.75 1.47 Silver Gold (C)M55339/06-00001

3 2.03 1.22 Nickel Gold (C)1149000N001-001

Figure 1

(Tee jack–jack–jack;

connects three plugs)

Figure 2

(Tee jack–plug–jack;

connects two plugs and one jack)

Figure 3

(Tee jack–jack–plug;

connects two plugs and one jack)

See page 6 for alternate body plating information.

N Adapters

Right Angle Adapters

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Tee Adapters

•

Straight Cable Plugs ....................................................89

Straight Cable Jacks .....................................................89

Bulkhead Cable Jacks ..................................................89

Panel Jack Receptacles (square ﬂange) ................90

Right Angle Panel Jack Receptacles .....................90

Panel Plug Receptacles..............................................90

Bulkhead Jack Receptacles ......................................90

In-Series Adapters ........................................................91

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

2B, 3B 1 1.80 .690 Nickel Silver UG-94A/U C/01

7 2 1.38 .500 Nickel Silver 1801021N000-000 A/02

Figure 1

B dia.

Figure 2

B dia.

Cable Figure Dimensions Plating Delta P/N Assembly Procedure/

Group A B Body Contact Trim Code

2B, 3B 1 1.88 .690 Nickel Gold UG-95A/U C/08

7 2 1.41 .500 Nickel Silver 1808021N000-000 A/02

Figure 1

B dia.

Figure 2

B dia.

See page 209 for cable groups. •Assembly procedures start on page 210. • See page 208 for mounting dimensions.

Cable Fig. Dimensions Mounting Max. Plating Delta P/N

Group A B C Figure Panel Body Contact

2B, 3B 1 1.84 .920 .690 72 .250 Nickel Gold 1816003N720-000 C/08

7 1 1.47 .920 .500 72 .250 Nickel Silver (C)1816021N721-000 A/14

2B, 3B 2 1.84 .920 .600 72 .250 Nickel Gold 1819003N720-000 B/03

7 2 1.59 .920 .500 72 .250 Nickel Silver 1819020N720-000 B/14

Figure 1

(Military clamp)

Figure 2

(Crimp)

.875 dia.

C dia.

B.875 dia.

(crimp sleeve)

Assembly

Procedure/

Trim Code

N70 Connectors

N70 Conﬁgurations

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Straight Plug - Military Clamp For Flexible Cable

Straight Jack - Military Clamp For Flexible Cable

Bulkhead Jacks - For Flexible Cable

•

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 1.13 .660 .062 .080 33 Nickel Gold (C)1813000N331-000

2 1.10 .720 .062 .080 33 Nickel Silver (C)1823000N331-001

3 1.41 1.16 .300 .050 33 Nickel Gold (C)1815000N330-000

Figure 1

(Straight jack receptacle)

Figure 2

(Straight plug receptacle)

C (I.D. )

.083 dia.

C (I.D. )

.083 dia.

Figure 3

(Right angle jack receptacle)

D (I.D. )

.083 dia.

Figure Dimensions Mounting Plating Delta P/N

A B C D Figure Body Contact

1 1.62 .707 .099 .250 72 Nickel Silver (C)1820000N728-000

Figure 1

(Front mount, hermetically sealed)

.812 dia.

C (I.D. )

D max. panel

See page 208 for mounting dimensions.

•

N70 Receptacles

Panel Receptacle - Solder Pot Contact

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Bulkhead Receptacle - Sodler Pot Contact

Figure PlatingDimensions Delta P/N

A B Body Contact

1 1.75 .660 Nickel Gold (C)1828000N000-000

2 1.59 .780 Nickel Gold (C)1827000N000-000

dia.

B dia.

Figure 1

(Straight jack–jack;

connects two plugs)

Figure 2

(Straight plug–plug;

connects two jacks)

Figure PlatingDimensions Delta P/N

A B Body Contact

1 1.30 1.38 Nickel Gold (C)1829000N000-000

2 1.75 1.22 Nickel Gold (C)1838000N000-000

3 1.75 1.47 Nickel Gold (C)1830000N000-000

Figure 2

(Tee jack–jack–jack;

connects three plugs)

Figure 3

(Tee jack–plug–jack;

connects two plugs and one jack)

Figure 1

(Right angle jack–plug;

connects one plug and one jack)

N70 Adapters

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Right Angle & Tee Adapters

Straight Adapters

•

1) Trim cable jacket to dimension A.

Slide backnut, washer, V-gasket, and

braid clamp onto cable as shown.

Cable jacket should bottom on step

in braid clamp.

2) Comb braid wires out straight and fold back over front

shoulder of braid clamp (braid wires should not overlap

one another after folding). Trim braid wires ﬂush with step

of braid clamp. Trim cable dielectric and center conductor

to dimensions B and C.

3) If support insulator is provided for RG-62 or 71 cable, insert

into hollow in dielectric. Assemble rear bushing or washer (if

supplied), rear insulator (if captive contact) and contact, and

solder contact to center conductor. Rear of contact should be

ﬂush with cable dielectric end. For right angle connectors

with access cap, omit this step entirely.

4) Insert prepared cable and hardware into body

and tighten backnut. For right angle connectors

with access cap, solder center conductor into slot

in contact and tighten access cap.

Code A B C

A/01 .375 (3/8) .047 (3/64) .203 (13/64)

A/02 .375 (3/8) .109 (7/64) .203 (13/64)

A/03 .438 (7/16) .250 (1/4) .188 (3/16)

A/04 .281 (9/32) .047 (3/64) .125 (1/8)

A/05 .313 (5/16) .125 (1/8) .109 (7/64)

A/06 .594 (19/32) .391 (25/64) .156 (5/32)

A/07 .375 (3/8) .047 (3/64) .125 (1/8)

A/08 .281 (9/32) .109 (7/64) .094 (3/32)

A/09 .344 (11/32) .109 (7/64) .094 (3/32)

A/10 .406 (13/32) .109 (7/64) .203 (13/64)

A/11 .500 (1/2) .281 (9/32) .156 (5/32)

A/12 .343 .040 .219

A/13 .375 (3/8) .125 (1/8) .156 (5/32)

A/14 .355 .090 .188 (3/16)

A/15 .425 .094 (3/32) .259

A/16 .328 (21/64) .094 (3/32) .188 (3/16)

A/17 .375 (3/8) .109 (7/64) .125 (1/8)

A/18 .375 (3/8) .062 (1/16) .172 (11/64)

A/19 .375 (3/8) .188 (3/16) .094 (3/32)

Code A B C

A/20 .375 (3/8) .047 (3/64) .172 (11/64)

A/21 .500 (1/2) .313 (5/16) .172 (11/64)

A/22 .375 (3/8) .188 (3/16) .141 (9/64)

A/23 .438 (7/16) .078 (5/64) .172 (11/64)

A/24 .500 (1/2) .094 (3/32) .141 (9/64)

A/25 .438 (7/16) .141 (9/64) .172 (11/64)

A/26 .625 (5/8) .281 (9/32) .250 (1/4)

A/27 .688 (11/16) .281 (9/32) .125 (1/8)

A/28 .656 (21/32) .297 (19/64) .250 (1/4)

A/29 .688 (11/16) .125 (1/8) .313 (5/16)

A/30 .688 (11/16) .469 (15/32) .156 (5/32)

A/31 .700 (21/32) .453 (29/64) .250 (1/4)

A/32 .313 (5/16) .078 (5/64) .188 (3/16)

A/33 .250 (1/4) .078 (5/64) .094 (3/32)

A/34 .250 (1/4) .062 (1/16) .109 (7/64)

A/35 .837 .575 .150

A/36 .450 .250 .150

A/37 .281 .038 .188

A/38 .281 .069 .156

Assembly Procedures

Assembly Procedure A

CAI-A

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Trim Codes For Assembly Procedure A

Backnut

Washer

(if supplied)

V-Gasket Braid Clamp

Washer and/or bushing

(if supplied)

Contact

(non-captive)

Contact (captive)

& insulator

Fold braid over

Non-captive Contact

Solder

Captive Contact

Washer or bushing (if supplied)

Crimp Sleeve Contact (captive)

Contact

(non-captive)

Solder

B C

1) Trim cable per chart. Slide crimp

sleeve back onto cable.

2) If support insulator is provided for RG-62 or 71 cable, insert

into hollow in dielectric. Solder contact onto center conductor;

back of contact ﬂush with trimmed end of cable dielectric

(omit this step for right angle connectors with access caps).

Flare cut end of braid slightly by rotating dielectric.

3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail.

a) For captive contact connectors, push cable in until contact snaps into insulator.

b) For noncaptive contact connectors, push cable in until cable dielectric bottoms

in connector.

c) For right angle or tee connectors with access caps, push cable in until end of

braid touches connector body shoulder, and cable center conductor rests in

contact slot.

Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward

until ﬂush with body and crimp (see page 211 for hex die sizes).

For right angle or tee connectors with access caps: Solder center conductor into

contact slot, assemble insulator disc (if supplied), then press cap into body until

seated or screw into place.

Code A B C

B/01 .320 .470 .140

B/02 .422 .578 .172

B/03 .406 .500 .187

B/04 .285 .505 .140

B/05 .335 .460 .140

B/06 .187 .437 .219

B/07 .422 .610 .156

B/08 .422 .562 .219

B/09 .313 .610 .203

B/10 .280 .436 .187

B/11 .430 .542 .156

B/12 .300 .434 .156

B/13 .300 .447 .156

B/14 .420 .645 .187

B/15 .300 .420 .120

B/16 .312 .609 .125

B/17 .250 .500 .156

B/18 .437 .562 .109

B/19 .343 .437 .156

Code A B C

B/20 .250 .375 .156

B/21 .425 .550 .156

B/22 .375 .500 .156

B/23 .281 .469 .125

B/24 .250 .700 .109

B/25 .343 .775 .125

B/26 .343 .437 .109

B/27 .313 .437 .187

B/28 .219 .271 .078

B/29 .200 .320 .060

B/30 .500 .650 .219

B/31 .350 .840 .150

B/32 .175 .260 .095

B/33 .195 .270 .045

B/34 .150 .250 .105

B/35 .195 .280 .170

B/36 .150 .325 .090

B/37 .195 .295 .075

B/38 .150 .225 .095

B/39 .250 .300 .135

Assembly Procedures

Assembly Procedure B

CAI-B

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Trim Codes For Assembly Procedure B

Backnut Washer

Gasket Braid Clamp

Contact (captive)

& insulator

Contact

(non-captive)

Fold braid over

Non-captive

Captive

Solder

1) Trim cable jacket to dimension A.

Slide backnut, washer, gasket, and

braid clamp onto cable as shown.

Cable jacket should bottom on step

in braid clamp.

2) Comb braid wires out straight and fold back over front

shoulder of braid clamp (braid wires should not overlap

one another after folding). Trim braid wires ﬂush with

edge of braid clamp. Trim cable dielectric and center

conductor to dimensions B and C.

3) If support insulator is provided for RG-62 or 71 cable,

insert into hollow in dielectric. Assemble rear insulator

(if captive contact) and contact, and solder contact to

center conductor. Rear of contact should be ﬂush with

cable dielectric end.

4) Insert prepared cable and

hardware into body and

tighten backnut. For right

angle connectors with access

cap, solder cable center

conductor to slot in contact

and tighten access cap.

Trim Codes

Code A B C

C/01 .656 (21/32) .141 (9/64) .250 (1/4)

C/02 .500 (1/2) .125 (1/8) .250 (1/4)

C/03 .450 .136 .187

C/04 .375 (3/8) .109 (7/64) .125 (1/8)

C/05 .375 (3/8) .062 (1/16) .250 (1/4)

C/06 .500 (1/2) .188 (3/16) .125 (1/8)

C/07 .575 .438 .094

C/08 .625 (5/8) .141 (9/64) .219 (7/32)

V-Gasket

Backnut Washer

Braid Clamp

Contact (captive)

& insulator

Contact

(non-captive)

Fold braid over

Armor Clamp

Non-captive

Captive

Solder

1) Slide armor clamp over cable. Push

armor back to expose cable end.

Slide backnut, washer (if supplied),

gasket, and braid clamp onto cable

as shown. Cable jacket should

bottom on step in braid clamp.

Trim cable jacket to dimension A.

2) Comb braid wires out straight and fold back over

front shoulder of braid clamp (braid wires should

not overlap one another after folding). Trim braid

wires ﬂush with edge of braid clamp. Trim cable

dielectric and center conductor to dimensions B

and C.

3) Assemble rear insulator (if captive contact) and

contact, and solder contact to center conductor.

Rear of contact should be ﬂush with cable

dielectric end.

4) Insert prepared cable and hardware into body and tighten backnut.

Trim armor to ﬁt between armor clamp and braid clamp. Tighten armor clamp.

Trim Codes

Code A B C

D/01 .375 (3/8) .047 (3/64) .250 (1/4)

D/02 .500 (1/2) .188 (3/16) .219 (7/32)

D/03 .344 (11/32) .047 (3/64) .219 (7/32)

D/04 .313 (5/16) .047 (3/64) .172 (11/64)

D/05 .625 (5/8) .281 (9/32) .250 (1/4)

D/06 .313 (5/16) .062 (1/16) .109 (7/64)

Assembly Procedures

Assembly Procedure C

CAI-C-D

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Assembly Procedure D

Backnut

Contact/Insulator/

cone grip assembly

Solder

1) Slide backnut onto cable as

shown. Trim cable to dimen-

sions A and B as shown. Slit

jacket to dimension C in two

places, 180° apart.

2) Slide cone/insulator/contact assembly under

braid until braid is ﬂush with shoulder.

Solder contact to center conductor.

3) Insert prepared cable and

hardware into body; tight-

en assembly by holding

nut stationary and turning

body.

Trim Codes

Code A B C

E/01 .250 (1/4) .141 (9/64) .313 (5/16)

E/02 .219 (7/32) .063 (1/16) .250 (1/4)

E/03 .250 (1/4) .031 (1/32) .250 (1/4)

Backnut Washer

V-Gasket Solder Ferrule

Contact (captive),

insulator, & bushing

Contact

(non-captive)

Non-captive

Captive

Solder

1) Trim cable per chart. Slide backnut,

washer, v-gasket, and solder ferrule

onto cable. Trimmed end of cable

jacket should bottom on step in

solder ferrule.

2) Solder ferrule to cable jacket as shown. Retrim

cable dielectric to proper length if it has

extruded from soldering heat. Slide bushing

and rear insulator over cable dielectric if captive

contact. Solder contact onto center conductor;

back of contact ﬂush with trimmed end of

cable dielectric.

Trim Codes

Code A B

F/01 .250 (1/4) .219 (7/32)

F/02 .250 (1/4) .172 (11/64)

F/03 .188 (3/16) .188 (3/16)

F/04 .109 (7/64) .265 (17/64)

F/05 .156 (5/32) .250 (1/4)

F/06 .219 (7/32) .250 (1/4)

F/07 .156 (5/32) .172 (11/64)

F/08 .109 (7/64) .219 (7/32)

3) Insert prepared

cable and hard-

ware into body

and tighten

backnut.

Assembly Procedures

Assembly Procedure E

CAI-E-F

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Assembly Procedure F

with end of body

Soft solder

all around

Coupling nut

Gasket

‘C’ ring

Body

1) Trim cable as shown.

Remove any burrs

from jacket and

center conductor.

2) Soft solder cable jacket to

body, making sure that end

of cable is ﬂush with end of

body. After solder joint has

cooled, retrim any protrud-

ing dielectric ﬂush with end

of body.

3) Assemble ‘C’ ring and gasket

to body. Compress ‘C’ ring

and slide body assembly into

coupling nut until ring is

seated in groove.

Trim Codes

Code A B

G/01 .090 70-90°

Trim Codes

Code A

H/01 .090

H/02 .060

H/03 .115

H/04 .150

with insulator

Body assembly

Contact

A.015"

Soft solder

all around

1) Trim cable as shown.

Remove any burrs

from jacket and

center conductor.

2) Solder contact to center

conductor, ﬁxturing to

maintain gap as shown.

Remove any excess solder

from outside of contact.

3) Insert cable into body and

solder cable jacket to body,

keeping end of cable ﬂush

with insulator as shown.

Plug body assembly and contact shown; procedure is identical for jack connectors.

with insulator

Body assembly

Soft solder

all around

1) Trim cable as shown.

Remove any burrs

from jacket and

center conductor.

2) Insert cable into body and

solder cable jacket to body,

keeping end of cable ﬂush

with insulator as shown.

Plug body assembly and contact shown; procedure is identical for jack connectors.

Trim Codes

Code A B

I/01 .090 70-90°

Cable Positioner

.50

.375

.250-36 UNS-2A thread

Using this positioner in the ﬁnal step of assembly procedure H or I (for plugs only)

will ensure that the contact and insulator are retained in the proper position to

meet MIL-C-39012 requirements. The positioner should be screwed ﬁnger-tight

into the mating end of the connector (as shown at right) before the cable jacket is

soldered to the body assembly.

For .085" Cable:

P/N 63-10072-2

For .141" Cable:

P/N 63-10072-1

Assembly Procedures

Assembly Procedure G

CAI-G-I

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Assembly Procedure H

Assembly Procedure I

Soft solder

all around

Solder center

conductor to

contact

Press cap in

until seated

Cap

Insulator

(if supplied)

1) Trim cable as shown.

Remove any burrs

from jacket and

center conductor.

2) Soft solder cable jacket to body, making sure

that end of cable is ﬂush with step in body.

Solder center conductor into contact slot,

assemble insulator disc (if supplied), then press

cap into body until seated or screw into place.

Trim Codes

Code AB

J/01 .109 .047

J/02 .059 .039

J/03 .059 .079

J/04 .050 .059

Solder

.015"

Crimp or solder sleeve

Cable dielectric end

Heat-shrink tubing

Crimp or solder sleeve

Solder hole

(for solder-type

connectors only)

Heat-shrink tubing

(if supplied)

B C

1) Trim cable per chart. Slide crimp (or

solder) sleeve and heat-shrink tubing

(if supplied) back onto cable.

2) Solder contact onto center conductor, ﬁxturing to

maintain gap as shown. Flare cut end of braid slightly

by rotating dielectric.

3) Insert cable/contact into rear of body, with all braid wires on outside

of crimp tail. Push cable in until cable dielectric bottoms in connector.

Trim excess braid wires even with shoulder of body. Slide crimp sleeve

forward until ﬂush with body and crimp (see page 211 for hex die

sizes). (For solder-type connectors, solder braid to body and sleeve

through hole in sleeve.) Slide heat-shrink tubing into place and shrink

with hot-air gun.

Plug body assembly and contact shown; procedure is identical for jack connectors.

Code A B C

K/01 .250 .270 .110

K/02 .200 .270 .140

K/03 .225 .290 .110

K/04 .225 .330 .110

K/05 .250 .330 .110

K/06 .250 .315 .095

Code A B C

K/07 .220 .290 .135

K/08 .420 .620 .090

K/09 .090 .135 .160

K/10 .250 .415 .115

K/11 .250 .400 .150

K/12 .282 .390 .140

Trim Codes

Assembly Procedures

Assembly Procedure J

CAI-J-K

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Assembly Procedure K

Crimp or solder sleeve

Solder hole

(for solder-type connectors)

B C

1) Trim cable per chart. Slide crimp

(or solder) sleeve onto cable.

2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push

cable in until end of braid touches connector body shoulder and center conductor

rests in contact slot.

Slide crimp sleeve forward until ﬂush with body and crimp (see page 211 for hex

die sizes). (For solder-type connectors, solder braid to body and sleeve through

hole in sleeve.)

Solder center conductor into contact slot, assemble insulator disc (if supplied),

then press cap into body until seated or screw into place.

Crimp or solder sleeve

Solder center

conductor to

contact

Press cap in

until seated

Cap

Insulator

(if supplied)

Backnut

Contact

Insulator

Clamp

B C

Crimp or solder sleeve

Solder hole

(for solder-type connectors)

Solder

1) Trim cable per chart.

Slide crimp (or solder)

sleeve and backnut

onto cable.

2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all

braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is ﬂush with front

of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor,

with contact shoulder ﬂush with front of insulator. Solder contact to center conductor.

3) Slide crimp sleeve forward until ﬂush with clamp shoulder; crimp as close to shoulder as

possible. (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body

and sleeve through hole in sleeve.)

4) Insert prepared cable into back of body. Slide nut forward and tighten to 12–15 inch-pounds.

Cable Trim Codes

Code A B C

M/01 .281 .390 .140

Frame only—P/N M22520/5-01 —Use with interchangeable dies listed below.

Cable Group* Hex Die Size Die Set P/N Closure

2, 3, 4 .429 hex, .400 wide M22520/5-61 A

5, 6 .213 hex, .400 wide M22520/5-19 B

7 .255 hex, .400 wide M22520/5-19 A

9 .128 hex, .400 wide M22520/5-35 B

10 .151 hex, .400 wide M22520/5-37 B

11 .105 hex, .400 wide M22520/5-33 B

M22520/5-01

Trim Codes

Code A B C

L/01 .250 .438 .109

L/02 .125 .219 .109

L/03 .234 .344 .109

L/04 .195 .270 .050

L/05 .095 .155 .050

L/06 .281 .390 .070

* For Delta cable groups. See MIL-PRF-39012

speciﬁcations for dies sizes used with

M39012 cable groups.

Assembly Procedures

Assembly Procedure L

CAI-L-M

Delta Electronics Mfg. Corp.

deltarf.com 978-927-1060 sales@deltarf.com

Assembly Procedure M

Crimp Tools For Flexible Cable

4-hole ﬂanges

Figure A B C

04 1/2.360 .089

05 1/2.340 .102

07 11 /16 .500 #3-56 tap

08 11 /16 .500 .136

09 11 /16 .500 .125

10 11 /16 .500 .120

12 11 /16 .500 .109

18 3/4.531 .136

26 1 .718 #6-32 tap

27 1 .718 #4-40 tap

30 1 .718 .166

32 1 .718 .136

32A 1 .718 .136*

33 1 .718 .125

34 1 3/32 .812 .150

36 1 3/16 .906 #6-32 tap

39 1 3/16 .906 .152

40 1 3/16 .906 .125

45 2 1.437 .257

91 .375 .250 .067

91A .375 .232 .093

square

C dia. typ.

(L)typ.

dia. typ.

B (L)

* Countersunk to .245 dia.

2-hole ﬂanges

Figure A B C D

92 .223 .481 .625 .102

92A .260 .481 .625 .102

95 .640 1.015 1.30 .125

D-Hole

Figure A B

51 .755 .723

54 .630 .598

55 .630 .583

57 .557 .531

59 .505 .473

62 .442 .410

63 .407 .362

65 .380 .348

66 .319 .292

67 .255 .236

68 .195 .176

Double D-Hole

Figure A B

69 .755 .692

72 .630 .536

75 .380 .341

84 .319 .278

A dia.

Round Hole

Figure A

82 .255

89 .380

A dia.

Twinax Connectors

Figure A B C D

PCB04 .045 .500 .250 .045

A dia. typ.

dia.

B (L) typ.

C (L) typ.

A dia. typ.

.0625 typ.

dia.

typ.

B (L) typ.

C (L) typ.

.125 (L)

Coaxial connectors

Figure A B C D

PCB01 .067 .400 .200 .045

PCB02 .045 .500 .250 .045

PCB03 .067 .300 .150 .035

PCB05 .067 .200 .100 .055

PCB06 .067 .200 .100 .045

PCB07 .045 .177 .088 .045

PCB08 .032 .100 .050 .032

(PCB traces are shown for illustrative purpose only,

and are not representative of actual circuitry.)

(PCB traces are shown for illustrative purpose only,

and are not representative of actual circuitry.)

Mounting Figures

Connector Flanges

(Panel Mounted Connectors)

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Panel Cutouts

(Bulkhead Mounted Connectors)

P.C. Board Drilling

Group Cables

1A RG-5, 5A, 5B, 21, 21A; M17/73, /162

1 1B RG-6, 6A; M17/2

1C RG-143, 143A, 212, 222; M17/73, /112, /162

22A RG-8, 8A, 213; M17/74

2B RG-11, 11A; M17/6

3A RG-9, 9A, 9B, 214; M17/75

3 3B RG-13A, 216; M17/77

3C RG-225; M17/127

4 RG-393; M17/127

5 RG-58, 58A, 58C, 141, 141A; M17/28, /111

66A RG-55A, 142, 142A, 223, 400; M17/60, /84, /128

6B RG-55, 55B, 142B; M17/60, /84

77A RG-59, 59A, 59B, 62, 62A, 62B, 62C, 210; M17/29, /30, /97

7B RG-71, 71A, 71B; M17/90

88A RG-122; M17/54

8B RG-180, 180A, 180B, 195; M17/95, /137

99A RG-174, 188, 188A, 316; M17/152

9B RG-179A, 179B, 187, 187A; M17/94, /136

10 Double-Shielded RG-174, 316; M17/152

11 RG-178, 178A, 178B, 196, 196A; M17/93

12 .250" semi-rigid; RG-401; M17/129

13 .141" semi-rigid; RG-402; M17/130

14 .085" semi-rigid; RG-405; M17/133

15 RG-10, 12, 215; M17/6, /74

16 RG-14A, 217; M17/78, /165

17 RG-17A, 218

18 RG-18A, 219

19 RG-115A

20 RG-118A, 228A

21 RG-126

22 RG-302

23 RG-303

24 RG-304

25 Special 8X cable; contact factory for details.

26 Belden 8281

27 RG-108, 108A; M17/45

28 RG-22, 22A, 22B; M17/15

29 Belden 9207; Dearborn 6207; IBM 7362211

30 M17/176

31 AT&T 735A

Cable Group

RG-5, 5A, B 1A

RG-6, 6A 1B

RG-8, 8A 2A

RG-9, 9A, B 3A

RG-10 15

RG-11, 11A 2B

RG-12 15

RG-13A 3B

RG-14A 16

RG-17A 17

RG-18A 18

RG-21, 21A 1A

RG-22, 22A, B 28

RG-55, 55B 6B

RG-55A 6A

RG-58, 58A, C 5

RG-59, 59A, B 7A

RG-62, 62A, B, C 7A

RG-71, 71A, B 7B

RG-108, 108A 27

RG-115A 19

RG-118A 20

RG-122 8A

RG-126 21

RG-141, 141A 5

RG-142, 142A 6A

RG-142B 6B

RG-143, 143A 1C

RG-174 9A

RG-174DS 10

RG-178, 178A, B 11

RG-179A, 179B 9B

RG-180, 180A, B 8B

RG-187, 187A 9B

RG-188, 188A 9A

RG-195 8B

RG-196, 196A 11

RG-210 7A

RG-212 1C

RG-213 2A

RG-214 3A

RG-215 15

RG-217 16

RG-218 17

RG-219 18

RG-222 1C

RG-223 6A

Cable Group

RG-225 3C

RG-228A 20

RG-302 22

RG-303 23

RG-304 24

RG-316 9A

RG-316DS 10

RG-393 4

RG-400 6A

RG-401 12

RG-402 13

RG-405 14

M17/2 1B

M17/6 2B

M17/15 28

M17/28 5

M17/29 7A

M17/30 7A

M17/45 27

M17/73 1A

M17/162 1A

M17/112 1C

M17/74 2A

M17/75 3A

M17/127 3C

M17/77 3B

M17/60 6A

M18/84 6A

M17/128 6A

M17/97 7A

M17/54 8A

M17/95 8B

M17/137 8B

M17/152 9A

M17/93 11

M17/129 12

M17/130 13

M17/133 14

M17/78 16

M17/165 16

M17/176 30

AT&T 735A 31

Belden 8281 26

Belden 9207 29

Dearborn 6207 29

IBM 7362211 29

Note: MIL-PRF-39012 QPL connectors have cable

groups deﬁned by the MIL speciﬁcation, not the

Delta cable groups shown here. See page 185

for M39012 cable groups.

Cable Groups

Delta Cable Groups

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Cable Group Finder

Delta Electronics Manufacturing Corporation

416 Cabot Street, P.O. Box 53

Beverly, MA 01915

FSCM/CAGE 00795

Ordering & Warranty Information

Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com

Warranty

We warrant our parts to be free of defects and workmanship for one year from purchase. During that time we will repair or replace (at our option)

er’s, or military

installation costs.

No other warranties apply, and no other liability may be assumed or extended by representatives or distributors. The terms of the applicable

warranty or warranties, as the case may be, as set forth herein are the sole and exclusive warranty terms that shall have any

any product order, resulting from the quotation and such terms and in lieu of all other warranties, expressed or implied, including the implied

Returns

Returns will be accepted only with a Return Authorization number issued by Delta, and are subject to inspection and acceptance upon arrival.

Restocking charges will be determined prior to issusnce of Return Authorization. All claims for shortages must be made within 30 days of

receipt by customer.

Ordering Information

or to sale.

Order changes, cancellation, or termination will be accepted only with written approval from Delta Electronics Manufacturing.

urchasing procedures,

by Delta customers only.

Heli-Grip® , PressMount® , and Global Manufacturer logo are trademarks. The Heli-Grip design is covered by U.S. and foreign patents.

Delta Electronics Mfg. Corp.

www.deltarf.com

978-927-1060

sales@deltarf.com

PO Box 53

416 Cabot St.

Beverly, MA 01915