8 7 6 5 2 3 4 1 DWG. NO. SE95203 THIS DRAWING IS A CONTROLLED DOCUMENT FOR SOURIAU USA, INC. IT IS SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT THE DOCUMENT CONTROL CENTER FOR THE LATEST REVISION. NOTES: SEE SHEET 2 6.350 [161.29] .175 [4.45] 2X R.175 [4.45] 2X C .004 [0.1] 2X D .148 [3.76] A B C .330 [8.38] B 48X GROUNDING SOCKET CONTACT CONTACT AND WIRE SHOWN FOR ILLUSTRATION C 2X C .320 MIN. [8.13] PIN CONTACT CURRENT BEARING SURFACE .740 MAX. [18.80] .025 [0.63] .1225 #.0075 [3.112#0.191] A CUSTOMER PART NO., SOURIAU CATALOG NO., CAGE NO., DATE CODE, AND NAME INK STAMPED, COLOR WHITE. TYP. GROUNDING RIVET WITH PROTECTIVE COATING CATALOG NO. RBGP48-116N SHOWN B B THE INFORMATION CONTAINED IN THIS DRAWING IS CONFIDENTIAL AND MAY NOT BE DISCLOSED WITHOUT WRITTEN CONSENT FROM SOURIAU USA, INC. 6.750 MAX. [171.45] 6.100 MAX. [154.94] F REVISED PER ECN 12046 E REVISED PER ECN 7622 REV DESCRIPTION RSK 08-22-13 JRD 09-23-02 SDH 08-22-13 SDH 09-23-02 BY DATE CHKD DATE DRAWING TITLE GROUND BLOCK, RACK AND PANEL MOUNTING CAT NO. FULL VIEW SCALE 2:1 THIRD ANGLE PROJECTION TOLERANCES UNLESS OTHERWISE SPECIFIED No. OF PLACES INCH [mm] ONE PLACE #.1 [ #3] TWO PLACES #.02 [ #0.5] THREE PLACES #.010 [ #0.25] ANGLES #1 $ 8 7 6 5 4 3 RBGP48-116_ (SEE TABLE) CAGE NO: 09922 SIZE: D APPROVAL LINEAR MEASURE: .370 MAX. [9.40] CUSTOMER INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.5M - 1994. 2 07-16-13 DRAWN: RSK CHKD : SDH 07-16-13 03-01-03 DSGN : FDH 07-16-13 MFG : DH 07-16-13 QC : BB DRAWING SCALE: 5:1 DRAWING NO. REV SE95203 WWW.SOURIAU.COM 1 OF 2 1 F A 8 7 6 5 2 3 4 1 DWG. NO. THIS DRAWING IS A CONTROLLED DOCUMENT FOR SOURIAU USA, INC. IT IS SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT THE DOCUMENT CONTROL CENTER FOR THE LATEST REVISION. SE95203 PERFORMANCE CHARACTERISTICS NOTES: UNLESS OTHERWISE SPECIFIED MECHANICAL: ALL MATERIALS DO NOT EXHIBIT A RELATIVE MAGNETIC PERMEABILITY OF GREATER THAN 2 IN ACCORDANCE WITH MIL-STD-1344, METHOD 3006. SALT SPRAY: MAITENANCE AGING: IN ACCORDANCE WITH MIL-STD-1344, METHOD 2002. VIBRATION (RANDOM): IN ACCORDANCE WITH MIL-STD-1344, METHOD 2005, TEST CONDITION V, LETTER E. CONTACT INSERTION FORCES: 10 LBS [44.4N] MAX., IN ACCORDANCE WITH MIL-STD-1344, METHOD 2002. MECHANICAL (IMPACT) SHOCK: IN ACCORDANCE WITH MIL-STD-1344, METHOD 2004, TEST CONDITION A. CONTACT SEPARATION FORCES: 2.0 OZ [0.56N] MIN., IN ACCORDANCE WITH S280W601, PARA. 4.6 17. CONTACT RETENTION: 20 LBS [88.9N] MIN., IN ACCORDANCE WITH MIL-STD-1344, METHOD 2007. AXIAL DISPLACEMENT DOES NOT EXCEED .012 [0.30]. IN ACCORDANCE WITH S280W601, PARA. 4.6.12. INTERNAL CONTACT DURABILITY: 100 CYCLES OF MATING AND UNMATING TO DEPTH OF MECHANICAL AND ELECTRICAL ENGAGEMENT IN ACCORDANCE WITH S280W601, PARA. 4.6.13. OVERSIZE PIN CONTACT PROTECTION: CONTACT WALKOUT: 48 HOURS IN ACCORDANCE WITH MIL-STD-1344, METHOD TEST CONDITION B. THERMAL SHOCK: PROBE DAMAGE: C 1. GROUNDING BLOCK ACCOMMODATES PIN CONTACTS PER MIL-C-39029/1-101, WITH A WIRE RANGE OF 24-22-20 AWG. USE INSERTION/REMOVAL TOOL PER MIL-I-81969/14C-11. ENVIRONMENTAL: MAGNETIC PERMEABILITY: GROUND BLOCK DESIGNED TO PREVENT ENTRANCE OF AN OVERSIZE TEST PIN OF .077 [1.78] IN ACCORDANCE WITH S280W601, PARA. 4.6.15. TEMPERATURE LIFE: 1001, MATERIAL: STRAIN RELIEF GROMMET: EPOXY GROUNDING MODULE BODY: IN ACCORDANCE WITH MIL-STD-1344, METHOD 1003, TEST CONDITION A, EXCEPT STEPS 2 AND 4 ARE 2 MINUTES MAX. DURATION. TEMPERATURE EXTREMES FOR STEPS 1 AND 3 ARE -65 C $ +0 / $-5 C $ $]. TO +125 C $ +5 / $0 C $ [-85 F $ +0 / $-9 F $ TO +257 F $ +9 / $0 F GLASS FORTIFIED THERMOPLASTIC UL94V-0, COLOR BLUE GROUNDING PLATE: ALUMINUM ALLOY PER QQ-A-200 125C $ +5 / $0 C $ [+257 F $ +9 / $0 F $] FOR 1000 HOURS IN ACCORDANCE WITH S280W601, PARA. 4.6.10. GROUNDING SOCKET CONTACTS: BERYLLIUM COPPER. CONTACT RETENTION CLIPS: BERYLLIUM COPPER. SOCKET CONTACT SLEEVES: THERMOPLASTIC, LIQUID CRYSTAL POLYMER. PROTECTIVE COATING: POLYURETHANE, COLOR OPTIONAL. ELECTRICAL: CONTACT RESISTANCE: IN ACCORDANCE WITH: MIL-STD-1344, METHOD 3004. SIZE 16-20: 45 MILLIVOLTS MAX., AT 7.5AMPS WITH 20 AWG SILVER PLATED WIRE. VOLTAGE STABILITY: SILICONE RUBBER, COLOR RED. GROMMET BONDING: LOW LEVEL CONTACT RESISTANCE: IN ACCORDANCE WITH S280W601, PARA. 4.6.16. D GROUNDING RIVETS: ALUMINUM ALLOY. C FINISH: IN ACCORDANCE WITH MIL-STD-1344, METHOD 3002. SIZE 16-20: .009 OHMS MAX., WITH 20 AWG SILVER PLATED WIRE. 4 MILLIVOLT MAX. DIFFERENCE BETWEEN RECORDED HIGHEST AND LOWEST POTENTIAL DROP VALUES IN ACCORDANCE WITH S208W601, PARA. 4.6.14. GROUNDING PLATE: SEE TABLE. GROUNDING SOCKET CONTACTS: 50 MICRO INCHES [1.27 MICRONS] MIN. NICKEL ALL OVER, PIN CONTACT CURRENT BEARING SURFACE OVER PLATED WITH 50 MICROINCES [1.27 MICRONS] MIN. HARD GOLD. ESTIMATED CONNECTOR WEIGHT: 40 GRAMS [1.41 OZ] B CATALOG NO. DESCRIPTION TABLE CATALOG NO. CUSTOMER PART NO. GROUNDING PLATE FINISH RBGP48-116 --- CHROMATE CONVERSION COATED PER MIL-C-81706, CLASS 3, METHOD C, COLOR GOLD [REF: ALODINE 1200] RBGP48-116N S280W601-116 NICKEL PLATED PER MIL-C-26074, CLASS 3, GRADE B, (500 MICROINCHES [12.7 MICRONS] MIN.) THE INFORMATION CONTAINED IN THIS DRAWING IS CONFIDENTIAL AND MAY NOT BE DISCLOSED WITHOUT WRITTEN CONSENT FROM SOURIAU USA, INC. B A DRAWING TITLE GROUND BLOCK, RACK AND PANEL MOUNTING CAT NO. THIRD ANGLE PROJECTION TOLERANCES UNLESS OTHERWISE SPECIFIED No. OF PLACES INCH [mm] ONE PLACE #.1 [ #3] TWO PLACES #.02 [ #0.5] THREE PLACES #.010 [ #0.25] ANGLES #1 $ 8 7 6 5 4 3 RBGP48-116_ (SEE TABLE) CAGE NO: 09922 SIZE: D APPROVAL LINEAR MEASURE: CUSTOMER INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.5M - 1994. 2 07-16-13 DRAWN: RSK CHKD : SDH 07-16-13 03-01-03 DSGN : FDH 07-16-13 MFG : DH 07-16-13 QC : BB DRAWING SCALE: 4:1 DRAWING NO. REV SE95203 WWW.SOURIAU.COM 2 OF 2 1 F