GFOCA Fiber Optic System 180-148 GFOCA Internal Mount Jam Nut Receptacle MIL-DTL-83526 Type, 4 Channel GFOCA MIL-DTL-83526 type hermaphroditic GFOCA internal mount jam nut receptacle How To Order Product Series Insert Cap Key Dash No. (Table III) Material/Finish (Table I) 180 - 148 ZR - N Basic No. F .120 1 Dust Cover Style (Table IV) Alignment Sleeve Style (Table II) .250 Panel .050 Thk Retainer Nut 1 Seal Material (Table V) (See notes) 1.850 Max (when dust cover is installed) 1.200 Max 1.375 Max Hex 1.134 Max Flat 1.587 Max Flats P1 Alignment Pin 1.390 Max Seal O1.555 Max P2 1 S1 Seal Removable insert cap 2X Alignment Sleeve I 1.0625-.1P-.2L-DS-2A Jam Nut Mating Plane S2 O1.681 Max Lanyard with Ring Attachment 2X Screw 3/32" Hex Material and Finish Detail A 1.145 1.140 O 1.200 1.190 Panel Cut-out As viewed from front of panel (c) 2012 Glenair, Inc. Terminus Retainer Plate 1 Dust Cover External hardware: See Table I Insert Cap: Al alloy/anodize Misc. hardware: Stainless steel/passivate Lanyard: Stainless steel/coated Seals: See Table V Notes Connector assembly is designed IAW the interface requirements of MIL-PRF-83526/17 (Draft). Standard configuration is shown in sample part number. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com I-10 E-Mail: sales@glenair.com GFOCA Fiber Optic System 180-148 GFOCA Internal Mount Jam Nut Receptacle MIL-DTL-83526 Type, 4 Channel Table I: Material/Finish Code G2 ZN ZR Material Aluminum alloy Table II: Alignment Sleeve Style Finish Description Hard anodize, gray Zinc-nickel, olive drab Zinc-nickel, black Code Style N None Consult factory for additional options Refer to Appendix for material/finish details Table III: Insert Cap Key Configurations Dash No: Config. 1 2 3 4 Key 1 Key 2 Key 3 Key U (universal) .139 .137 2X P1 .084 .082 P2 P1 S1 S2 .043 .002 TYP .162 .160 .162 .160 P1 P2 3 (c) 2012 Glenair, Inc. Style Female Hermaphroditic None P2 S1 S2 U 4X CAVITY MARKING .159 .157 .159 .157 Table IV: Dust Cover Style Code F H N P2 P1 2 Key Polarization Marking .162 .160 2 TIMES S1 S2 S1 S2 1 .084 .082 Table V: Seal Material Dash No. 1 2 3 4 Seal material(s) Fluorosilicone / Fluorosilicone panel seal Fluorosilicone / Conductive fluorosilicone panel seal EPDM / EPDM panel seal EPDM / Conductive EPDM panel seal U.S. CAGE Code 06324 Rev. 12.11.15 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com I-11 E-Mail: sales@glenair.com I