MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR E15C7 CERAMIC 2.5V OS1C 01/10
E15C7 Series
OSCILLATOR
E15C7
ELECTRICAL SPECIFICATIONS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
• Crystal Clock Oscillators
• LVPECL Output
• +2.5V Supply Voltage
• Complementary Output
• Tri-State Output Function
• 6 Pad Ceramic SMD Package
• Low Stand-by Current
• RoHS Compliant (Pb-Free)
H 2.0
L 7.0
W 5.0
0°C to +70°C, or -40°C to +85°C
-55°C to +125°C
2.5VDC ±5%
75mA Maximum
100mA Maximum
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
VCC-1.025VDC Minimum
VCC-1.085VDC Minimum
VCC-1.405VDC Maximum
VCC-1.305VDC Maximum
300pSec Typical, 700pSec Maximum
50 ±5(%)
50 Ohms into VCC-2.0VDC
Complementary Output and Tri-State
Enables Output
Enables Output
Disables Output: High Impedance
30µA Maximum
10 mSeconds Maximum
0.4pSec Typical, 1 pSec Maximum
-60dBc/Hz at 10Hz Offset
-95dBc/Hz at 100Hz Offset
-125dBc/Hz at 1kHz Offset
-143dBc/Hz at 10kHz Offset
-145dBc/Hz at 100kHz Offset
-145dBc/Hz at 1MHz Offset
-146dBc/Hz at 10MHz Offset
Nominal Frequency (MHz)
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Logic Control / Additional Output
Tri-State Input Voltage
Standby Current
Start Up Time
RMS Phase Jitter
Typical Phase Noise
77.76MHz to 159.999999MHz
160MHz to 312.5MHz
Inclusive of All Conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, 1st Year
Aging at 25°C, Shock, and Vibration
0°C to +85°C
-40°C to 0°C
0°C to +85°C
-40°C to 0°C
20% to 80% of waveform
at 50% of waveform
VIH of 70% of VCC Minimum
No Connection
VIL of 30% of VCC Maximum
Without Load
FJ = 12kHz to 20MHz
Fo=156.250MHz
77.76, 78.125, 80, 80.157, 85, 87.125, 90, 100, 106.25, 110, 119, 120, 122.888, 124.4, 125, 127,
128, 131.072, 133, 133.33, 133.333, 135, 137.472, 150, 155.52, 156.25, 159.375, 161.1328, 162.5,
163.84, 164.355, 164.355469, 166, 166.67, 167.3316, 170, 173.3705, 175, 176.83816, 187.5, 187.509375,
187.5103, 200, 212.5, 240, 250, or 312MHz
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR E15C7 CERAMIC 2.5V OS1C 01/10
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
E15C7 E 2 F - 155.520M TR
PART NUMBERING GUIDE
AVAILABLE OPTIONS
Blank=Bulk
TR=Tape & Reel
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
F=Complementary Output and Tri-State
DUTY CYCLE
2=50 ±5(%)
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C (*)
F=±20ppm Maximum over 0°C to +70°C (*)
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
J=±25ppm Maximum over -40°C to +85°C (*)
Pin 1: Tri-State
Pin 2: No Connect
Pin 3: Case Ground
Pin 4: Output
Pin 5: Complementary Output
Pin 6: Supply Voltage
A B C D E F
16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1
F G H J K L
8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0*
TAPE
M N O P Q
1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN
R S T U V
QTY/REEL
2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 1,000
REEL
*Compliant to EIA 481A
Tolerances= +0.1
MARKING
ORIENTATION
5.00
±0.15
7.00
±0.15 5.08
±0.15
2.54
TYP
1.2 ±0.2
2.60 ±0.15
1
2
3
4
5
6
1.4
±0.1
2.00
MAX
(*) Not available over Nominal Frequency range of 212.500001MHz to 312.500MHz
Characteristic Specification
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Flammability UL94-V0
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
