231224501789 - Vishay Presicion Group

Document Number: 28744 For technical questions, contact: specialresistors@vishay.com www.vishay.com

Revision: 30-Nov-09 1

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Vishay Beyschlag

Thin Film Chip Resistors with Established Reliability

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01 and

MCA 1206 VG01 thin film flat chip resistors with established

reliability are the perfect choice for all high-reliability

applications typically found in the fields of military, aircraft

and spacecraft electronics. These versions supplement the

families of professional and precision thin film flat chip

resistors MCS 0402, MCT 0603, MCU 0805 and MCA 1206.

FEATURES

•

Approved to EN 140401-801, version E

•Established reliability, failure rate level E6

•Advanced thin film technology

•Excellent overall stability: Exceeds class 0.5

•Pure Sn termination on Ni barrier layer

•Compatible with lead (Pb)-free and lead containing

soldering processes

•Compliant to RoHS directive 2002/95/EC

APPLICATIONS

•Military

•Avionics

•Space

Notes

• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over

operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.

• The failure rate level E6 (10-6/h, πQ = 0.3), corresponding to MIL Level P, is superior to level E5 (10-5/h, πQ = 1) and thus may be used as a

replacement.

METRIC SIZE

IMPERIAL: 0402 0603 0805 1206

EN/CECC: RR1005M RR1608M RR2012M RR3216M

TECHNICAL SPECIFICATIONS

DESCRIPTION MCS 0402 VG01 MCT 0603 VG01 MCU 0805 VG01 MCA 1206 VG01

EN/CECC size, style RR1005M RR1608M RR2012M RR3216M

Resistance range 10 Ωto 1 MΩ1 Ωto 1 MΩ

Resistance tolerance ± 1 %; ± 0.1 %

Temperature coefficient ± 50 ppm/K; ± 15 ppm/K

Climatic category (LCT/UCT/duration) 55/125/56

Rated dissipation, P70 0.063 W 0.1 W 0.125 W 0.25 W

Operating voltage, Umax. AC/DC 50 V 75 V 150 V 200 V

Film temperature 125 °C

Max. resistance change at P70

for resistance range, |ΔR/R| max. after: 10 Ωto 1 MΩ1 Ωto 1 MΩ

1000 h ≤ 0.25 %

8000 h ≤ 0.5 %

225 000 h ≤ 1.5 %

Permissible voltage against ambient

(insulation):

1 min; Uins 75 V 100 V 200 V 300 V

Continuous 75 V 75 V 75 V 75 V

Assessed failure rate level E6 = 10-6/h

Quality factor, πQ0.3

Failure rate: FITobserved < 0.1 x 10-9/h

www.vishay.com For technical questions, contact: specialresistors@vishay.com Document Number: 28744

2Revision: 30-Nov-09

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Vishay Beyschlag Thin Film Chip Resistors with Established Reliability

Note

• Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION

PART NUMBER AND PRODUCT DESCRIPTION

PART NUMBER: MCT0603HC2873FP500

PART NUMBER: MCT0603HZ0000ZP500

MODEL/SIZE SPECIFICATION TCR VALUE TOLERANCE PACKAGING

MCS 0402

MCT 0603

MCU 0805

MCA 1206

H = EN 140401-801;

version E;

failure rate level E6

C = ± 50 ppm/K

E = ± 15 ppm/K

Z = Jumper

3 digit value

1 digit multiplier

MULTIPLIER

8 = *10-2

9 = *10-1

0 = *100

1 = *101

2 = *102

3 = *103

4 = *104

0000 = Jumper

F = ± 1 %

B = ± 0.1 %

Z = Jumper

PRODUCT DESCRIPTION: MCT 0603-50 1 % VG01 P5 287K

PRODUCT DESCRIPTION: MCT 0603 VG01 P5 0R0

MCT 0603 -50 1 % VG01 P5 287K

MCT 0603 - - VG01 P5 0R0

MODEL/SIZE TCR TOLERANCE SPECIFICATION PACKAGING RESISTANCE VALUE

MCS 0402

MCT 0603

MCU 0805

MCA 1206

± 50 ppm/K

± 15 ppm/K

± 1 %

± 0.1 %

VG01 = EN 140401-801;

version E;

failure rate level E6

49R9 = 49.9 Ω

287K = 287 kΩ

0R0 = Jumper

M C T 0 6 0 3 H Z 0 0 0 0 Z P 5 0 0

M C T 0 6 0 3 H C 2 8 7 3 F P 5 0 0

Document Number: 28744 For technical questions, contact: specialresistors@vishay.com www.vishay.com

Revision: 30-Nov-09 3

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Thin Film Chip Resistors with Established Reliability Vishay Beyschlag

Note

• The ordering information according to EN 140401-801:2007 shown above succeeds and replaces the ordering information according to earlier

versions of the detail specification EN 140401-801 or its predecessor CECC 40401-801, for example:

CECC 40401-801 EZ RR1608M C 287K F E6

CECC 40401-801 S RR1608M C 287K F E6

with EZ; S Assessment level, where EZ is successor to and superior replacement for S

RR1608M Style, with suffix M for “metric”

C Temperature coefficient, according to the detail specification

C = ± 50 ppm/K; E = ± 15 ppm/K

Note

• According to EN 140401-801, resistance values are to be selected from the E96 series for ± 1 % tolerance and from the E192 series for

± 0.1 % tolerance

EN 140401-801 ORDERING INFORMATION

Example of the ordering information for a resistor: MCT 0603-50 1 % VG01 287K

EN140401-801EZRR1608MR287KFE6

Example of the ordering information for a zero ohm jumper: MCT 0603 VG01 0R0

EN140401-801EZRR1608M-0R00-E6

The elements used in the component number have the following meaning:

EN140401-801

RR1608M

287K

EN detail specification number

Assessment level for the zero-defect approach

Style

Temperature coefficient, according to EN 60062

R = ± 50 ppm/K; P = ± 15 ppm/K

Resistance value, according to EN 60062, 4 characters

Tolerance on rated resistance, according to EN 60062

F = ± 1 %; B = ± 0.1 %

Failure rate level according to EN 60115-1, table ZB.1

TEMPERATURE COEFFICIENT AND RESISTANCE RANGE

DESCRIPTION RESISTANCE VALUE

TCR TOLERANCE MCS 0402 VG01 MCT 0603 VG01 MCU 0805 VG01 MCA 1206 VG01

± 50 ppm/K ± 1 % 10 Ωto 1 MΩ1 Ωto 1 MΩ1Ωto 1 MΩ1Ωto 1 MΩ

± 15 ppm/K ± 0.1 % 100 Ωto 33.2 kΩ100 Ωto 47.5 kΩ100 Ωto 100 kΩ43 Ωto 332 kΩ

Jumper ≤ 20 mΩ; Imax. = 0.63 A ≤ 20 mΩ; Imax. = 1 A ≤ 20 mΩ; Imax. = 1.5 A ≤ 20 mΩ; Imax. = 2 A

PACKAGING

MODEL

PAPER TAPE ON REEL

ACC. IEC 60286-3, TYPE I -

UNIT QUANTITY CODE QUANTITY CODE

MCS 0402 VG01 180 mm/7" 1000 E1

No alternative packaging available

10 000 E0

MCT 0603 VG01 180 mm/7" 1000 P1

5000 P5

MCU 0805 VG01 180 mm/7" 1000 P1

5000 P5

MCA 1206 VG01 180 mm/7" 1000 P1

5000 P5

www.vishay.com For technical questions, contact: specialresistors@vishay.com Document Number: 28744

4Revision: 30-Nov-09

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Vishay Beyschlag Thin Film Chip Resistors with Established Reliability

DIMENSIONS

Note

• Resistors MCA 1206 VG01 and MCU 0805 VG01 are marked using to the four-character code system of IEC 60062, 4.2.3.

Resistors MCT 0603 VG01 and MCS 0402 VG01 do not show any marking on their light blue protective coating.

Note

• The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in

publication IPC 7351. They do not guarantee any supposed thermal properties, however, they will be found adequate for most general

applications.

DIMENSIONS AND MASS

TYPE H

(mm)

MASS

(mg)

MCS 0402 VG01 0.32 ± 0.05 1.0 ± 0.05 0.5 ± 0.05

> 75 % of W

0.2 ± 0.1 0.2 + 0.1/- 0.15 0.6

MCT 0603 VG01

0.45 + 0.1/- 0.05

1.55 ± 0.05 0.85 ± 0.1

0.3 + 0.15/- 0.2

1.9

MCU 0805 VG01

0.45 + 0.1/- 0.05

2.0 ± 0.1 1.25 ± 0.15 0.4 + 0.1/- 0.2 4.6

MCA 1206 VG01

0.55 ± 0.1

3.2 + 0.1/- 0.2 1.6 ± 0.15 0.5 ± 0.25 9.2

RECOMMENDED SOLDER PAD DIMENSIONS

TYPE

WAVE SOLDERING REFLOW SOLDERING

(mm)

MCS 0402 VG01 - - - - 0.35 0.55 0.55 1.45

MCT 0603 VG01 0.55 1.10 1.10 2.75 0.65 0.70 0.95 2.05

MCU 0805 VG01 0.80 1.25 1.50 3.30 0.90 0.90 1.40 2.70

MCA 1206 VG01 1.40 1.50 1.90 4.40 1.50 1.15 1.75 3.80

Document Number: 28744 For technical questions, contact: specialresistors@vishay.com www.vishay.com

Revision: 30-Nov-09 5

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Thin Film Chip Resistors with Established Reliability Vishay Beyschlag

DESCRIPTION

Production is strictly controlled and follows an extensive set

of instructions established for reproducibility. A

homogeneous film of metal alloy is deposited on a high

grade ceramic (Al2O3) substrate and conditioned to achieve

the desired temperature coefficient. Specially designed inner

contacts are deposited on both sides. A special laser is used

to achieve the target value by smoothly cutting a meander

groove in the resistive layer without damaging the ceramics.

For the high ohmic range, optimized cermet products provide

comparable properties. The resistor elements are covered

by a protective coating designed for electrical, mechanical

and climatic protection. The terminations receive a final pure

tin on nickel plating.

The result of the determined production is verified by an

extensive testing procedure performed on 100 % of the

individual resistors. Only accepted products are laid directly

into the paper tape in accordance with EN 60286-3 (3),

Type I.

ASSEMBLY

The resistors are suitable for processing on automatic SMD

assembly systems. They are suitable for automatic soldering

using wave, reflow or vapour phase as shown in

IEC 61760-1 (3). Solderability is specified for 2 years after

production or requalification. The permitted storage time is

20 years.

The resistors are RoHS compliant; the pure tin plating

provides compatibility with lead (Pb)-free soldering

processes. The immunity of the plating against tin whisker

growth has been proven under extensive testing.

The encapsulation is resistant to all cleaning solvents

commonly used in the electronics industry, including

alcohols, esters and aqueous solutions. The suitability of

conformal coatings, if applied, shall be qualified by

appropriate means to ensure the long-term stability of the

whole system.

All products comply with the GADSL (1) and the

CEFIC-EECA-EICTA (2) list of legal restrictions on

hazardous substances. This includes full compliance with

the following directives:

•2000/53/EC End of Vehicle life Directive (ELV) and

Annex II (ELV II)

•2002/95/EC Restriction of the use of Hazardous

Substances directive (RoHS)

•2002/96/EC Waste Electrical and Electronic Equipment

Directive (WEEE)

APPROVALS

The resistors are approved within the IECQ-CECC Quality

Assessment System for Electronic Components to the detail

specification EN 140401-801 which refers to EN 60115-1,

EN 140400 and the variety of environmental test procedures

of the IEC 60068 (3) series.

Conformity is attested by the use of the CECC Logo ( ) as

the Mark of Conformity on the package label.

Vishay BEYSCHLAG has achieved “Approval of

Manufacturer” in accordance with IEC QC 001002-3,

clause 2. The release certificate for “Technology Approval

Schedule” in accordance with CECC 240001 based on

IEC QC 001002-3, clause 6 is granted for the

Vishay BEYSCHLAG manufacturing process.

RELATED PRODUCTS

This product family of flat chip resistors with established

reliability is complemented by Zero Ohm Jumpers.

A wider range of TCR, tolerance and resistance values, plus

the option of values from a different E series is available with

products approved to EN 140401-801, Version A, without

established reliability, nominal failure rate level E0 (quality

factor πQ = 3). See the datasheets:

•“Professional Flat Chip Resistors”, document no. 28705

•“Precision Flat Chip Resistors”, document no. 28700

Notes

(1) Global Automotive Declarable Substance List, see www.gadsl.org

(2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade

organisation representing the information and communications technology and consumer electronics), see

www.eicta.org/index.php?id=1053&id_article=340

(3) The quoted IEC standards are also released as EN standards with the same number and identical contents

www.vishay.com For technical questions, contact: specialresistors@vishay.com Document Number: 28744

6Revision: 30-Nov-09

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Vishay Beyschlag Thin Film Chip Resistors with Established Reliability

FUNCTIONAL PERFORMANCE

100- 50 150

0.1

Power Dissipation in W

050

Ambient Temperature amb

0.2

0.3

MCA 1206 VG01

MCU 0805 VG01

MCT 0603 VG01

MCS 0402 VG01

125

Derating

°C

100

0.01

0.1

1K 10K

100K

MCA 1206 VG01

MCU 0805 VG01

MCT 0603 VG01

MCS 0402 VG01

Resistance Value

Current Noise

µV/V

In accordance with IEC 60195

Current Noise - 1

10 100 1K

120

10K

Resistance Value

In accordance with IEC/TR 60440

100

100K

Non-Linearity 3

Non-Linearity - 3

MCA 1206 VG01

MCU 0805 VG01

MCT 0603 VG01

MCS 0402 VG01

Document Number: 28744 For technical questions, contact: specialresistors@vishay.com www.vishay.com

Revision: 30-Nov-09 7

MCS 0402 VG01, MCT 0603 VG01, MCU 0805 VG01, MCA 1206 VG01

Thin Film Chip Resistors with Established Reliability Vishay Beyschlag

FUNCTIONAL PERFORMANCE

Further information on the performance of these products is

given in the following datasheets:

• “Professional Flat Chip Resistors”, document no. 28705

• “Precision Flat Chip Resistors”, document no. 28700

TESTS AND REQUIREMENTS

All tests are carried out in accordance with the following

specifications:

EN 60115-1, generic specification

EN 140400, sectional specification

EN 140401-801, detail specification

For further information on the tests and requirements of

these products please refer to the specifications mentioned

above, and to the following datasheets:

• “Professional Flat Chip Resistors”, document no. 28705

• “Precision Flat Chip Resistors”, document no. 28700

HISTORICAL 12NC INFORMATION

Note

The 12NC numeric codes are no longer supported as an official

Vishay ordering code. However, customers using the 12NC in their

material management system may choose to use the 12NC as their

customer specific part numbering system.

•The resistors had a 12-digit code starting with 2312

•The subsequent 4 digits indicated the resistor type,

specification and packaging; see the 12NC table

•The remaining 4 digits indicate the resistance value:

- The first 3 digits indicated the resistance value

-The last digit indicated the resistance decade in

accordance with the resistance decade table

RESISTANCE DECADE

Historical 12NC Example

The 12NC of a MCT 0603 VG01 resistor, value 287K and

TCR 50 with ± 1 % tolerance, supplied in cardboard tape of

5000 units per reel was: 2312 215 02874.

RESISTANCE DECADE LAST DIGIT

1Ω to 9.99 Ω8

10 Ω to 99.9 Ω9

100 Ω to 999 Ω1

1 kΩto 9.99 kΩ2

10 kΩ to 99.9 kΩ3

100 kΩ to 999 kΩ4

1MΩ5

HISTORICAL 12NC - Resistor type and packaging

DESCRIPTION 2312 ... .....

CARDBOARD TAPE ON REEL

TYPE TCR TOL. E1

1000 PIECES

10 000 PIECES

MCS 0402 VG01

± 50 ppm/K ± 1 % 260 0.... 275 0....

± 15 ppm/K ± 0.1 % 262 0.... 277 0....

Jumper 262 90001 277 90001

TYPE TCR TOL. P1

1000 PIECES

5000 PIECES

20 000 PIECES

MCT 0603 VG01

± 50 ppm/K ± 1 % 200 0.... 215 0.... 205 0....

± 15 ppm/K ± 0.1 % 202 0.... 217 0.... -

Jumper 202 90001 217 90001 207 90001

MCU 0805 VG01

± 50 ppm/K ±1 % 240 0.... 255 0.... 245 0....

± 15 ppm/K ± 0.1 % 242 0.... 257 0.... -

Jumper 242 90001 257 90001 247 90001

MCA 1206 VG01

± 50 ppm/K ± 1 %

No 12NC assigned to MCA 1206 VG01± 15 ppm/K ± 0.1 %

Jumper

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.