STD4N25 N - CHANNEL ENHANCEMENT MODE POWER MOS TRANSISTORS TYPE STD4N25 VDSS R DS(on) ID 250 V < 1.1 4A TYPICAL RDS(on) = 0.7 AVALANCHE RUGGED TECHNOLOGY 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC APPLICATION ORIENTED CHARACTERIZATION THROUGH-HOLE IPAK (TO-251) POWER PACKAGE IN TUBE (SUFFIX "-1") SURFACE-MOUNTING DPAK (TO-252) POWER PACKAGE IN TAPE & REEL (SUFFIX "T4") APPLICATIONS HIGH SPEED SWITCHING UNINTERRUPTIBLE POWER SUPPLY (UPS) MOTOR CONTROL, AUDIO AMPLIFIERS INDUSTRIAL ACTUATORS DC-DC & DC-AC CONVERTERS FOR TELECOM, INDUSTRIAL AND CONSUMER ENVIRONMENT PARTICULARLY SUITABLE FOR ELECTRONIC FLUORESCENT LAMP BALLASTS 3 1 3 2 IPAK TO-251 (Suffix "-1") 1 DPAK TO-252 (Suffix "T4") INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DS V DGR V GS Parameter Value Unit Drain-source Voltage (V GS = 0) 250 V Drain- gate Voltage (R GS = 20 k) 250 V Gate-source Voltage 20 V 4 A ID Drain Current (continuous) at T c = 25 o C ID Drain Current (continuous) at T c = 100 o C 2.5 A Drain Current (pulsed) 16 A I DM (*) P tot T stg Tj o Total Dissipation at T c = 25 C 50 W Derating Factor 0.4 W/o C Storage Temperature Max. Operating Junction Temperature -65 to 150 o C 150 o C (*) Pulse width limited by safe operating area December 1996 1/10 STD4N25 THERMAL DATA R thj-case R thj-amb R t hc-sink Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Thermal Resistance Case-sink Maximum Lead Temperature For Soldering Purpose Max Max Typ o 2.5 100 1.5 275 C/W C/W o C/W o C o AVALANCHE CHARACTERISTICS Symbol Parameter Max Value Unit IA R Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, < 1%) 4 A E AS Single Pulse Avalanche Energy (starting T j = 25 o C, I D = I AR , V DD = 50 V) 20 mJ E AR Repetitive Avalanche Energy (pulse width limited by T j max, < 1%) 5 mJ IA R Avalanche Current, Repetitive or Not-Repetitive (T c = 100 o C, pulse width limited by T j max, < 1%) 2.5 A ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbol V(BR)DSS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 A VGS = 0 I DS S Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 I GSS Gate-body Leakage Current (V DS = 0) Min. Typ. Max. 250 Unit V T c = 125 o C V GS = 20 V 10 100 A A 100 nA ON () Symbol Parameter Test Conditions V GS(th) Gate Threshold Voltage V DS = V GS I D = 250 A R DS(on) Static Drain-source On Resistance ID = 2 A I D(on) V GS = 10V On State Drain Current V DS > I D(on) x R DS(on)max V GS = 10 V Min. Typ. Max. Unit 2 3 4 V 0.7 1.1 4 A DYNAMIC Symbol gfs () C iss C oss C rss 2/10 Parameter Test Conditions Forward Transconductance V DS > I D(on) x R DS(on)max Input Capacitance Output Capacitance Reverse Transfer Capacitance V DS = 25 V f = 1 MHz ID = 2 A VGS = 0 Min. Typ. 1 2.5 500 85 15 Max. Unit S 700 120 30 pF pF pF STD4N25 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt) on Qg Q gs Q gd Parameter Test Conditions Min. Typ. Max. Unit 45 90 ns ns Turn-on Time Rise Time V DD = 125 V I D = 2 A R G = 50 VGS = 10 V (see test circuit, figure 3) 30 60 Turn-on Current Slope V DD = 200 V I D = 4 A R G = 50 VGS = 10 V (see test circuit, figure 5) 220 Total Gate Charge Gate-Source Charge Gate-Drain Charge V DD = 200 V ID = 4 A V GS = 10 V A/s 20 6 6 30 nC nC nC Typ. Max. Unit 35 20 60 50 30 90 ns ns ns Typ. Max. Unit 4 16 A A 1.5 V SWITCHING OFF Symbol t r(Vof f) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions Min. V DD = 200 V I D = 4 A R G = 50 VGS = 10 V (see test circuit, figure 5) SOURCE DRAIN DIODE Symbol Parameter Test Conditions IS D I SDM (*) Source-drain Current Source-drain Current (pulsed) VS D () Forward On Voltage I SD = 4 A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 4 A di/dt = 100 A/s V DD = 100 V T j = 150 o C (see test circuit, figure 5) t rr Q rr I RRM Min. V GS = 0 160 ns 0.8 C 10 A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Area Thermal Impedance 3/10 STD4N25 Derating Curve Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage 4/10 STD4N25 Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time 5/10 STD4N25 Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics Fig. 1: Unclamped Inductive Load Test Circuits 6/10 Fig. 2: Unclamped Inductive Waveforms STD4N25 Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge Test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/10 STD4N25 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch MAX. MIN. A 2.2 TYP. 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 TYP. MAX. 0.85 B5 0.033 0.3 0.012 B6 0.95 0.037 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 8/10 STD4N25 TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch MAX. MIN. A 2.2 TYP. 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 TYP. MAX. 0.85 B5 0.033 0.3 0.012 B6 0.95 0.037 C 0.45 0.6 0.017 0.023 C2 0.48 0.6 0.019 0.023 D 6 6.2 0.236 0.244 E 6.4 6.6 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 9/10 STD4N25 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 10/10