1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303
Document Number 88301
03-Mar-05
Vishay Semiconductors
www.vishay.com
1
Case Style 1.5KE
TRANSZORB Transient Voltage Suppressors
Major Ratings and Characteristics
Features
Glass passivated chip junction
Available in Unidrectional and Bidirectional
V(BR) Unidirectional 6.8 V to 540 V
V(BR) Bidirectional 6.8 v to 440 V
PPPM 1500 W
PM(AV) 6.5 W
IFSM (Unidirectional only) 200 A
Tj max. 175 °C
1500 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
Excellent clamping capability
Very fast response time
Low incremental surge resistance
Meets MSL level 1, per J-STD-020C
AEC-Q101 qualified
Typical Applications
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive, and
Telecommunication
Mechanical Data
Case: Molded plastic body over passivated junction
Epoxy meets UL-94V-0 Flammability rating
Terminals: Matte tin plated (E3 Suffix) leads, solder-
able per J-STD-002B and MIL-STD-750, Method
2026
Polarity: For unidirectional types the color band
denotes cathode end, no marking on bidirectional
types
Devices for bidirection Applications
For bidirectional types, use C or CA suffix for types
(e.g. 1.5KE440CA).
Electrical characteristics apply in both directions.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2
(2) Mounted on copper pad area of 1.6 x 1.6" (40 x 40 mm) per Fig. 5
(3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(4) VF = 3.5 V for 1.5KE220(A) & below; VF = 5.0 V for 1.5KE250(A) & above
Parameter Symbol Limit Unit
Peak pulse power dissipation with a 10/1000 µs waveform(1) (Fig. 1) PPPM 1500 W
Peak pulse current with a 10/1000 µs waveform(1) IPPM See Next Table A
Steady state power dissipation lead lengths 0.375“ (9.5 mm)(2),
TL = 75 °C
PM(AV) 6.5 W
Peak forward surge current 8.3 ms single half sine-wave unidirectional
only(3)
IFSM 200 A
Maximum instantaneous forward voltage at 100 A for unidirectional only(4) VF3.5/5.0 V
Operating junction and storage temperature range TJ, TSTG - 55 to + 175 °C
www.vishay.com
2
Document Number 88301
03-Mar-05
1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303
Vishay Semiconductors
Electrical Characteristics
(TA = 25 °C unless otherwise noted).
JEDEC
Type
Number
General
Semiconductor
Part
Number
Breakdown Voltage
V(BR) at IT (1)
(V)
Te s t
Current
IT
(mA)
Stand-off
Voltage
VWM
(V)
Maximum
Reverse
Leakage at
VWM
ID(4) (µA)
Maximum
Peak
Pulse
Current
IPPM(2) (A)
Maximum
Clamping
Voltage at
IPPM
VC (V)
Maximum
Temp
Coefficient
of V(BR)
(% / °C)
Min Max
1N6267 +1.5KE6.8 6.12 7.48 10 5.50 1000 139 10.8 0.057
1N6267A +1.5KE6.8A 6.45 7.14 10 5.80 1000 143 10.5 0.057
1N6268 +1.5KE7.5 6.75 8.25 10 6.05 500 128 11.7 0.061
1N6268A +1.5KE7.5A 7.13 7.88 10 6.40 500 133 11.3 0.061
1N6269 +1.5KE8.2 7.38 9.02 10 6.63 200 120 12.5 0.065
1N6269A +1.5KE8.2A 7.79 8.61 10 7.02 200 124 12.1 0.065
1N6270 +1.5KE9.1 8.19 10.0 1.0 7.37 50 109 13.8 0.068
1N6270A +1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 13.4 0.068
1N6271 +1.5KE10 9.00 11.0 1.0 8.10 10 100 15.0 0.073
1N6271A +1.5KE10A 9.50 10.5 1.0 8.55 10 103 14.5 0.073
1N6272 +1.5KE11 9.90 12.1 1.0 8.92 5.0 92.6 16.2 0.075
1N6272A +1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075
1N6273 +1.5KE12 10.8 13.2 1.0 9.72 5.0 86.7 17.3 0.076
1N6273A +1.5KE12A 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078
1N6274 +1.5KE13 11.7 14.3 1.0 10.5 5.0 78.9 19.0 0.081
1N6274A +1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081
1N6275 +1.5KE15 13.5 16.5 1.0 12.1 1.0 68.2 22.0 0.084
1N6275A +1.5KE15A 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084
1N6276 +1.5KE16 14.4 17.6 1.0 12.9 1.0 63.8 23.5 0.086
1N6276A +1.5KE16A 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086
1N6277 +1.5KE18 16.2 19.8 1.0 14.5 1.0 56.6 26.5 0.088
1N6277A +1.5KE18A 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089
1N6278 +1.5KE20 18.0 22.0 1.0 16.2 1.0 51.5 29.1 0.090
1N6278A +1.5KE20A 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090
1N6279 +1.5KE22 19.8 24.2 1.0 17.8 1.0 47.0 31.9 0.092
1N6279A +1.5KE22A 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092
1N6280 +1.5KE24 21.6 26.4 1.0 19.4 1.0 43.2 34.7 0.094
1N6280A +1.5KE24A 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.094
1N6281 +1.5KE27 24.3 29.7 1.0 21.8 1.0 38.4 39.1 0.096
1N6281A +1.5KE27A 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096
1N6282 +1.5KE30 27.0 33.0 1.0 24.3 1.0 34.5 43.5 0.097
1N6282A +1.5KE30A 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097
1N6283 +1.5KE33 29.7 36.3 1.0 26.8 1.0 31.4 47.7 0.098
1N6283A +1.5KE33A 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098
1N6284 +1.5KE36 32.4 39.6 1.0 29.1 1.0 28.8 52.0 0.099
1N6284A +1.5KE36A 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099
1N6285 +1.5KE39 35.1 42.9 1.0 31.6 1.0 26.6 56.4 0.100
1N6285A +1.5KE39A 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100
1N6286 +1.5KE43 38.7 47.3 1.0 34.8 1.0 24.2 61.9 0.101
1N6286A +1.5KE43A 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101
1N6287 +1.5KE47 42.3 51.7 1.0 38.1 1.0 22.1 67.8 0.101
1N6287A +1.5KE47A 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101
1N6288 +1.5KE51 45.9 56.1 1.0 41.3 1.0 20.4 73.5 0.102
1N6288A +1.5KE51A 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102
1N6289 +1.5KE56 50.4 61.8 1.0 45.4 1.0 18.6 80.5 0.103
1N6289A +1.5KE56A 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103
1N6290 +1.5KE62 55.8 68.2 1.0 50.2 1.0 16.9 89.0 0.104
1N6290A +1.5KE62A 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104
1N6291 +1.5KE68 61.2 74.8 1.0 55.1 1.0 15.3 98.0 0.104
1N6291A +1.5KE68A 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104
1N6292 +1.5KE75 67.5 82.5 1.0 60.7 1.0 13.9 109 0.105
1N6292A +1.5KE75A 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105
1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303
Document Number 88301
03-Mar-05
Vishay Semiconductors
www.vishay.com
3
Notes:
(1) Pulse test: tp 50 ms
(2) Surge current waveform per Fig. 3 and derate per Fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE CA62.35
(4) For bidirectional types with VR 10 volts and less the ID limit is doubled
* Bidirectional versions are UL approved under component across the line protection, ULV1414 file number E108274 (1.5KE200CA,
1.5KE220CA)
+ Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both uni-directional and bi-directional devices
1N6293 +1.5KE82 73.8 90.2 1.0 66.4 1.0 12.7 118 0.105
1N6293A +1.5KE82A 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105
1N6294 +1.5KE91 81.9 100.0 1.0 73.7 1.0 11.5 131 0.106
1N6294A +1.5KE91A 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106
1N6295 +1.5KE100 90.0 110 1.0 81.0 1.0 10.4 144 0.106
1N6295A +1.5KE100A 95.0 105 1.0 85.5 1.0 10.9 137 0.106
1N6296 +1.5KE110 99.0 121 1.0 89.2 1.0 9.5 158 0.107
1N6296A +1.5KE 110A 105 116 1.0 94.0 1.0 9.9 152 0.107
1N6297 +1.5KE120 108 132 1.0 97.2 1.0 8.7 173 0.107
1N6297A +1.5KE120A 114 126 1.0 102 1.0 9.1 165 0.107
1N6298 +1.5KE130 117 143 1.0 105 1.0 8.0 187 0.107
1N6298A +1.5KE130A 124 137 1.0 111 1.0 8.4 179 0.107
1N6299 +1.5KE150 136 165 1.0 121 1.0 7.0 215 0.108
1N6299A +1.5KE150A 143 158 1.0 128 1.0 7.2 207 0.106
1N6300 +1.5KE160 144 176 1.0 130 1.0 6.5 230 0.106
1N6300A +1.5KE160A 152 168 1.0 136 1.0 6.8 219 0.108
1N6301 +1.5KE170 153 187 1.0 138 1.0 6.1 244 0.108
1N6301A +1.5KE170A 162 179 1.0 145 1.0 6.4 234 0.108
1N6302 1.5KE180 162 198 1.0 146 1.0 5.8 258 0.108
1N6302A 1.5KE180A 171 189 1.0 154 1.0 6.1 246 0.108
1N6303 1.5KE200 180 220 1.0 162 1.0 5.2 287 0.108
1N6303A 1.5KE200A* 190 210 1.0 171 1.0 5.5 274 0.108
1.5KE220 198 242 1.0 175 1.0 4.4 344 0.108
1.5KE220A* 209 231 1.0 185 1.0 4.6 328 0.108
1.5KE250 225 275 1.0 202 1.0 4.2 360 0.110
1.5KE250A 237 263 1.0 214 1.0 4.4 344 0.110
1.5KE300 270 330 1.0 243 1.0 3.5 430 0.110
1.5KE300A 285 315 1.0 256 1.0 3.6 414 0.110
1.5KE350 315 385 1.0 284 1.0 3.0 504 0.110
1.5KE350A 333 368 1.0 300 1.0 3.1 482 0.110
1.5KE400 360 440 1.0 324 1.0 2.6 574 0.110
1.5KE400A 380 420 1.0 342 1.0 2.7 548 0.110
1.5KE440 396 484 1.0 356 1.0 2.4 631 0.110
1.5KE440A 418 462 1.0 376 1.0 2.5 602 0.110
1.5KE480 432 528 1.0 389 1.0 2.19 686 0.110
1.5KE480A 456 504 1.0 408 1.0 2.28 658 0.110
1.5KE510 459 561 1.0 413 1.0 2.06 729 0.110
1.5KE510A 485 535 1.0 434 1.0 2.15 698 0.110
1.5KE540 486 594 1.0 437 1.0 1.94 772 0.110
1.5KE540A 513 567 1.0 459 1.0 2.03 740 0.110
JEDEC
Type
Number
General
Semiconductor
Part
Number
Breakdown Voltage
V(BR) at IT (1)
(V)
Test
Current
IT
(mA)
Stand-off
Voltage
VWM
(V)
Maximum
Reverse
Leakage at
VWM
ID(4) (µA)
Maximum
Peak
Pulse
Current
IPPM(2) (A)
Maximum
Clamping
Voltage at
IPPM
VC (V)
Maximum
Te m p
Coefficient
of V(BR)
(% / °C)
Min Max
www.vishay.com
4
Document Number 88301
03-Mar-05
1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303
Vishay Semiconductors
Thermal Characteristics
(TA = 25 °C unless otherwise noted)
Application
This series of Silicon Transient Suppressors is
used in applications where large voltage tran-
sients can permanently damage voltage-sensitive
components.
The TVS diode can be used in applications where
induced lightning on rural or remote transmission
lines presents a hazard to electronic circuitry (ref:
R.E.A. specification P.E. 60).
This Transient Voltage Suppressor diode has a
pulse power rating of 1500 watts for one millisec-
ond. The response time of TVS diode clamping
action is effectively instantaneous (1 x 10-9 sec-
onds bidirectional); therefore, they can protect
integrated circuits, MOS devices, hybrids, and
other voltage sensitive semiconductors and com-
ponents. TVS diodes can also be used in series or
parallel to increase the peak power ratings.
Ratings and Characteristics Curves
(TA = 25 °C unless otherwise specified)
Parameter Symbol Limit Unit
Typical thermal resistance junction-to-lead RθJL 20 °C/W
Typical thermal resistance junction-to-ambient RθJA 75 °C/W
Figure 1. Peak Pulse Power Rating Curve
Figure 2. Pulse Derating Curve
P
PPM
Peak Pulse Power (kW)
0.1
1
10
100
0.1µs 1.0µs10µs
t
d
Pulse Width (sec.)
100µs 1.0ms 10ms
050 100 150 200
0
25
50
75
100
25 75 125 175
Peak Pulse Power (P
PP
) or Current (I
PP
)
Derating in Percentage, %
T
A
Ambient Temperature (°C)
Figure 3. Pulse Waveform
Figure 4. Typical Junction Capacitance
0
50
100
150
I
PPM
Peak Pulse Current, % I
RSM
T
J
=25°C
Pulse Width (td)
is defined as the point
where the peak current
decays to 50 % of I
PPM
tr=10µsec.
Peak Value
I
PPM
Half Value IPP
I
PPM
2
td
10/1000 µsec. Waveform
as defined by R.E.A.
01.0 2.0 3.0 4.0
t Time (ms)
510 100 500
10
100
1000
10000
C
J
, Capacitance, pF
V
(BR)
, Breakdown Voltage (V)
Unidirectional
Bidirectional
V
R
= Rated
Stand-off Voltage
V
R
=0
f=1MHz
Vsig = 50 m Vp-p
T
J
=25°C
1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303
Document Number 88301
03-Mar-05
Vishay Semiconductors
www.vishay.com
5
Figure 5. Steady State Power Derating Curve
Figure 6. Maximum Non-repetitive Forward Surge Current
Uni-Directional only
Figure 7. Incremental Clamping Voltage Curve (Unidirectional)
025 50 75 100 125 150 175 200
0
1.0
2.0
3.0
5.0
4.0
6.0
8.0
7.0
P
M(AV)
, Steady State Power Dissipation (W)
T
L
Lead Temperature (°C)
L = 0.375" (9.5 mm)
Lead Lengths
1.6 x 1.6 x .040"
(40x40x1mm)
Copper Heat Sinks
60 H
Z
Resistive or
Inductive Load
110 100
10
100
200
8.3 ms Single Half Sine-Wave
T
J
=T
J
max.
Peak Forward Surge Current (A)
Number of Cycles at 60 H
Z
0.5 12.0 10 20 50
0.1
0.2
1.0
2.0
10
20
100
VC , Incremental Clamping Voltage
IPP, Peak Pulse Current (A)
Waveform:
8/20 µs Impulse
=V
C-V
(BR)
1.5KE200
1.5KE130
1.5KE100
1.5KE75
1.5KE39
1.5KE33
1.5KE6.8
1.5KE9.1
1.5KE18
1.5KE12
C
V
Figure 8. Incremental Clamping Voltage Curve (Unidirectional)
Figure 9. Incremental Clamping Voltage Curve (Bidirectional)
Figure 10. Incremental Clamping Voltage Curve (Bidirectional)
0.5 12.0 10 50
0.1
0.2
1.0
2.0
10
20
100
VC , Incremental Clamping Voltage
IPP, Peak Pulse Current (A)
Waveform:
10/1000 µs Impulse
VC=V
C-V
(BR)
1.5KE200
1.5KE130
1.5KE75
1.5KE39
1.5KE33
1.5KE6.8
1.5KE9.1
0.5 12.0 10 20 50
IPP, Peak Pulse Current (A)
1.5KE200C
1.5KE75C
1.5KE39C
1.5KE15C
11C
1.5KE7.5C
1.5KE30C
0.1
0.2
1.0
2.0
10
20
100
VC , Incremental Clamping Voltage
Waveform:
10/1000 µs Impulse
VC=V
C-V
(BR)
0.5 12.0 10 20 50
IPP, Peak Pulse Current (A)
1.5KE200C
1.5KE75C
1.5KE39C
1.5KE15C
1.5KE11C
1.5KE7.5C
1.5KE30C
0.1
0.2
1.0
2.0
10
20
100
VC , Incremental Clamping Voltage
Waveform:
10/1000 µs Impulse
VC=V
C-V
(BR)
www.vishay.com
6
Document Number 88301
03-Mar-05
1.5KE6.8 thru 1.5KE540A, 1N6267 thru 1N6303
Vishay Semiconductors
Package outline dimensions in inches (millimeters)
Figure 11. Instantaneous Forward Voltage Characteristics Curve
Figure 12. Typical Transient Thermal Impedance
00.4 0.8 1.2 1.6 2.0
0.1
1
10
100
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
Pulse width = 300 s
1% Duty Cycle
TJ=25 C
Transient Thermal Impedance (°C/W)
10
100
1
0.1
0.001
t
p
Pulse Duration (sec)
0.01 0.1 1 10 100 1000
Figure 13. Typical Reverse Leakage Characteristics
0600
100 200 300 400 500
0.01
0.1
1.0
100
10
1000
Reverse Leakage Current (µA)
Breakdown Voltage (V)
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.375 (9.5)
0.285 (7.2)
0.210 (5.3)
0.190 (4.8)
DIA.
0.042 (1.07)
0.038 (0.96)
DIA.
Case Style 1.5KE
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.