LL Mn EW ENGLAND SEMICONDUCTOR NES1086 LOW DROPOUT VOLTAGE REGULATORS ABSOLUTE MAXIMUM RATINGS 1V Dropout, 1.5V @ Max Current 0.01% Load Regulation 0.015% Line Regulation 1% Reference Voltage Hermetic TO-254Z Pak Output Current 1.5A Power Dissipation Output Current-- NES 1086 ........sscsccsssescverersecsscnreersscessnesenerscnsssenecses Input Voltage Operating Junction Temperature Range Storage Temperature secessesetsussessescessesnssesseseesassusessene - 65C to + 150C 15A 35 V 3 TERMINAL POSITIVE ADJUSTABLE [Pinout Pin 1 Adjust Pin 2 Vout Pin 3 Vin TO-254Z MECHANICAL OUTLINE - B10 540 15 W sessesnseessaee - 55C to + 150C r poppet @| | 70 L445 dia 540 LL. oO 2 ples. | io = TNT MINIMUM (NPUT/QUTPUT DIFFERENTIAL (V) 2 Dropout Voltage 1 OUTPUT CURRENT (A) QUTPUT VOLTAGE DEVIATION (%) o Ss. t a -020 -50 Load Regulation -25 0 2 9 TEMPERATURE (C) 7 100 125 150 040 | k- >| 150 _ rm P60 max .3004+/-,010 on | 060+/-.020% ED | \_ + 4 |<. |_T 18047-0010 NEW ENGLAND SEMICONDUCTOR 6 Lake Street 1-800-446-1158 / (978) 794-1666 / FAX: (978) 689-0803 Lawrence,MA 01841 T4-4.8-860-039 REV: -- NES1086 u B PNEW ENGLAND SEMICONDUCTOR ELECTRICAL CHARACTERISTICS (Tc = 25C unless otherwise noted) NES1086 Parameter Conditions Min Typ Max Units Line Regulation I, = 10 mA, 1.5V <|Viy -Vour |S 15V 0.015 0.2 % T;= 25C 0.035 0.2 % 15V < | Vix -Vour | $ 35" 0.05 0.5 % Load Regulation lVin-Vour! =3V 10 mA Jour Tevitoap T,= 25C 0.1 0.3 % (1,2,3) 0.2 0.4 % Thermal Regulation T,= 25 C, 30 ms Pulse NSG2561 0.010 0.05 %/W Adjustment Pin Current | 10 mA < Tour S TrtutLoap Change LSV< I Vin -Vour| < 25V 0.2 5 pA Adjustment Pin Current | T;=25'C 55 pA Reference Voltage Ipur = 10 mA, T,= 25C | Vin -Vour| =3V 1.238 1.250 1.262 v 10 mA Iour S TevitLoap 15V< | Vin Vout | <25 Vy") 1.225 1.250 1.270 v Temperature Stability 55C < T, s+ 150C 0.5 % Minimum Load Current 1 Vin -Vour| =25V 5 10 mA Current Limit I Vin -Vour! =5V 1.8 A NSG2561 | Vin -Vour | =25V 0.2 A RMS Output Noise T,= 25C, 10 Hz <f < 10 kHz 0.003 % (% of Vour Ripple Rejection Ratio f= 120 Hz Caps = 25 UF Tantalum Jour - Irutt Loap | Vin ~Vourl =3V 60 75 dB Long-Term Stability T,= 125C, 1000 Hours 0.3 1 % Dropout Voltage AVarr = 1%, Ipur = Tru voap 1.3 1.5 Vv 1) Load and line regulation are measured at a constant junction temperature by low duty cycle pulse testing. 2) Line and Joad regulation are guaranteed up to the maximum power dissipation. 3) Iputt Loap Curve is defined as the minimum value of current limit as a function of input to output voltage. Note that power dissipation is only achievable over a limited range of input to output voltage. NEW ENGLAND SEMICONDUCTOR 6 Lake Street Lawrence,MA 01841 1-800-446-1158 / (978) 794-1666 / FAX: (978) 689-0803 T4-4.8-860-039 REV: --