3-13-02 A02016
Form No. TCF & TCFH
Page 1 of 3
Data Sheet: 9000
Bussmann®
CUBEFuseTM and Fuseholder TCF & TCFH
Finger-Safe Dual-Element Time-Delay Fuses 1-60 Amps
Indicating – 600 Volts or Less
Catalog Symbol: TCF (Fuse) & TCFH (Holder)
Dual-Element, Time-Delay Fuse: 10 Seconds
Minimum Operating Time at 500% Rated Current
Ampere Rating: 1 to 60 Amperes
Voltage Rating: 600 Volts AC (or less)
Interrupting Rating: 300,000A RMS Symmetrical (UL)
200,000A RMS Symmetrical (CSA)
Agency Information:
U.L. Listed Special Purpose Fuse: Guide JFHR,
File E56412
CSA Certified Fuse: Class 1422- 02, File 53787
U.L. Listed Fuseholder: Guide IZND,
File E214079
CSA Certified Fuseholder: Class 6225-01, File 47235
Other Electrical Certifications:
CE compliance for the European Union Low Voltage
Directive (50-1000V AC, 75-1500V DC)
DC Voltage Rating: 300 Volts DC (or less), 100,000AIR
Catalog Numbers
TCF1 TCF3 TCF6 TCF10
TCF15 TCF17-1/2 TCF20 TCF25
TCF30 TCF35 TCF40 TCF45
TCF50 TCF60
CUBEFuse™ Fuseholder Catalog Data
Amps Poles Wire * Dual Wire * Part Number
30 1 #14 - #8 Cu #14 Cu TCFH30
60 1 #14 - #4 Cu #10 Cu TCFH60
* 75ºC (MIN) CU Wire Only
• The world’s first finger safe industrial fuse system.
• True dual-element fuse constr uction with a minimum of 10
seconds time-delay at 500% of rating.
• Long time-delay minimizes nuisance circuit openings due
to temporary overloads and transient surges.
• Meets UL Class J Time-Delay electrical performance re-
quirements.
• High interruption rating to safely interrupt faults up to
300,000 amperes.
• Faster response to damaging faults reduces destructive
thermal and magnetic forces.
• Permanent open fuse indication.
• Designed to be an internationally accepted and specified
world class product.
• Smallest footprint of any power class fuse including Class
J, CC, T and RK.
• Meets requirements of IEC 60529 for IP-20 finger safe rat-
ing.
• No venting of arc or molten metal and gases during open-
ing.
• Robust cycling and inrush current withstand.
• Low let through currents under fault conditions.
• Provides TYPE 2 “no damage” protection for IEC motors
star ters when properly sized.
• Low watt loss reduces power consumption and lowers
operating temperature.
• Conventional Class J fuse case sizes and ampere ratings.
• Dovetail fuseholder design for ganging multiple fuse poles.
• 30 and 60 Amp fuseholders can be ganged together.
• 30 Amp fuses can be plugged into the 60A holder without
a reducer.
• 35mm DIN rail and chassis mounting features.
• Fuseholder wire por ts rated for dual wires.
Carton Quantity and Weight
Ampere Carton. Weight Per Carton
Rating Qty Lbs. Kg.
TCF1-30 12 1.39 .518
TCFH1-30 12 2.42 .902
TCF35-60 12 1.42 .530
TCFH35-60 12 2.57 .958