High Temperature MnO2 Tantalum Surface Mount Capacitors T498 150C Rated MnO2 Series Overview The KEMET T498 Series is a high temperature product that offers optimum performance characteristics in applications with operating temperatures up to 150C. Advanced materials and testing allow this series to perform with a reliability level of 0.5%/1000 hours at rated voltage and temperature. The T498 Series is available in five standard EIA case sizes with ROHS compliant terminations as standard. Benefits * * * * * * * * * * * * * * Meets or exceeds EIA standard 535BAAC Taped and reeled per EIA 481-1 Symmetrical, compliant terminations Optional gold-plated terminations Laser-marked case 100% surge current testing Complies with AEC-Q200 Capacitance values of 0.47F to 220F Tolerances of 10% and 20% Voltage rating of 6-50 VDC 100% steady-state accelerated aging Temperature/voltage derating is 2/3 at 150C RoHS compliance and lead-free terminations standard Operating temperature range of -55C to +150C Applications Typical applications include decoupling and filtering in industrial and automotive end applications such as DC/DC converters, portable electronics, telecommunications, and control units operating at temperatures up to 150C. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One WORLD One Brand One Strategy One Focus One Team (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com One KEMET T2012-1 * 10/15/2010 1 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Ordering Information T 498 X 227 M 010 A T E500 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Code High Temperature 150C A = 3216-18 B = 3258-19 C = 6032-25 D = 7343-31 X = 7343-43 First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% T = 100% Matte Tin (Sn) Plated* G = Gold Plated E = ESR Last three digits specify ESR in mOhms. (500 = 500mOhms) T= Tantalum 006 = 6.3V 010 = 10V 015 = 15V 020 = 20V 025 = 25V 035 = 35V 050 = 50V A = N/A Z = N/A Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel *See www.kemet.com for Pb Free transition. Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 150C 0.33 F - 220 F @ 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 6V - 50V DF(120Hz) Refer to Part Number Electrical Specification Table ESR (100kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.01CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 2 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Qualification Test Condition Characteristics C/C Endurance Storage Life Thermal Shock Temperature Stability 150C @ 2/3 Rated Voltage, 2000 Hrs. 150C @ 0 Volts, 2000 Hrs. MIL-STD-202, Method 107, Condition B, mounted, -55C to 150C, 1000 cycles Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +150C, +25C. DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits C/C Within 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25C -55C +85C +150C C/C IL* 10% 10% 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL C/C Surge Voltage Mechanical Shock/Vibration Within 10% of initial value 25C and 85C, 1.32 x Rated Voltage 1000 cycles (150C, 1.2 x Rated Voltage) Mil-Std-202, Meth. 213, Cond. I, 100G Peak Mil-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G Peak Within 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits C/C Within 10 of initial value DF Within initial limits DCL Within initial limits *IL = Initial Limit Certification AEC-Q200 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 3 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1000 1000 T498B106M010ATE1K8 T498B106M010ATE1K8_IMP T498D476M010ATE600 100 T498X227M010ATE500_IMP T498D476M010ATE600_ESR T498X227M010ATE500_ESR 10 10 1 1 0.1 T498X227M010ATE500 100 T498B106M010ATE1K8_ESR Capacitance (F) Impedance, ESR (Ohms) T498D476M010ATE600_IMP 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 0.1 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions - Millimeters (Inches) Metric will govern Termination cutout at KEMET's Option, either end Case Size KEMET EIA A 3216-18 B 3528-21 C 6032-28 D 7343-31 X 7343-43 Component L* W* H* 3.2 0.2 (.126 .008) 3.5 02 (138 .008) 6.0 0.3 (.236 .03) 7.3 0.3 (287 .012) 7.3 0.3 (.287 .012) 1.6 0.2 (.063 .008) 2.8 0.2 (.110 .008) 3.2 0.3 (.126 .012) 4.3 0.3 (.169 .012) 4.3 0.3 (.169 .012) 1.6 0.2 (.063 .008) 1.9 0.2 (.075 .008) 2.5 0.3 (.098 .012) 2.8 0.3 (098 .012) 4.0 0.3 (.157 .012) F* 0.1 S* 0.3 B* 0.15 (.004) (.012) (Ref) .006 1.2 (.047) 0.8 (.031) 0.4 (.016) 2.2 (.087) 0.8 (.031) 0.4 (.016) 2.2 (.087) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) X (Ref) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) 0.10 0.10 (.004 .004) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) Notes: (Ref) - Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-C-55365/8 specified dimensions (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 4 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Table 1 - Ratings & Part Number Reference Rated Voltage Rated Cap 85C VDC 6.3 6.3 6.3 6.3 6.3 6.3 120Hz F 10 15 22 33 47 100 10 10 10 10 10 10 10 10 10 10 10 10 Case Code/ Case Size KEMET Part Number DC Leakage B/3528-20 B/3528-20 C/6032-28 B/3528-20 C/6032-28 D/7343-31 (See below for part options) T498B106(1)006A(2)E2K1 T498B156(1)006A(2)E1K8 T498C226(1)006A(2)E1K3 T498B336(1)006A(2)E1K7 T498C476(1)006A(2)E800 T498D107(1)006A(2)E600 +25C Amps 0.6 0.9 1.4 2.1 3.0 6.3 2.2 3.3 4.7 4.7 10 15 15 22 22 47 100 220 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 B/3528-20 C/6032-28 D/7343-31 D/7343-31 X/7343-43 T498A225(1)010A(2)E4K6 T498A335(1)010A(2)E3K6 T498A475(1)010A(2)E2K9 T498B475(1)010A(2)E2K7 T498B106(1)010A(2)E1K8 T498B156(1)010A(2)E1K5 T498C156(1)010A(2)E1K8 T498B226(1)010A(2)E1K5 T498C226(1)010A(2)E1K1 T498D476(1)010A(2)E600 T498D107(1)010A(2)E600 T498X227(1)010A(2)E500 0.2 0.3 0.5 0.5 1.0 1.5 1.5 2.2 2.2 4.7 10.0 22.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 4600 3600 2900 2700 1800 1500 1800 1500 1100 600 600 500 128 144 161 177 217 238 247 238 316 500 500 574 115 130 145 159 195 214 222 214 284 450 450 517 51 58 64 71 87 95 99 95 126 200 200 230 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 16 16 16 16 16 16 16 16 16 16 16 16 16 1 3.3 4.7 6.8 6.8 10 10 15 22 33 47 68 100 A/3216-18 A/3216-18 B/3528-20 A/3216-18 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 X/7343-43 T498A105(1)016A(2)E6K5 T498A335(1)016A(2)E3K4 T498B475(1)016A(2)E2K1 T498A685(1)016A(2)E2K6 T498B685(1)016A(2)E1K8 T498B106(1)016A(2)E2K8 T498C106(1)016A(2)E1K4 T498C156(1)016A(2)E1K1 T498C226(1)016A(2)E1K0 T498D336(1)016A(2)E600 T498D476(1)016A(2)E600 T498D686(1)016A(2)E600 T498X107(1)016A(2)E100 0.2 0.5 0.8 1.1 1.1 1.6 1.6 2.4 3.5 5.3 7.5 10.9 16.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 6500 3400 2100 2600 1800 2800 1400 1100 1000 600 600 600 100 107 149 201 170 217 174 280 316 332 500 500 500 1285 96 134 181 153 195 157 252 284 299 450 450 450 1157 43 60 80 68 87 70 112 126 133 200 200 200 514 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 20 20 1 10 A/3216-18 C/6032-28 T498A105(1)020A(2)E5K9 T498C106(1)020A(2)E1K1 0.2 2.0 0.5 2.0 5900 1100 113 316 102 284 45 126 1.0 1.0 25 25 25 25 25 25 0.47 2.2 10 15 22 33 A/3216-18 B/3528-20 C/6032-28 D/7343-31 D/7343-31 D/7343-31 T498A474(1)025A(2)E8K5 T498B225(1)025A(2)E3K0 T498C106(1)025A(2)E1K1 T498D156(1)025A(2)E700 T498D226(1)025A(2)E600 T498D336(1)025A(2)E600 0.1 0.6 2.5 3.8 5.5 8.3 4.0 6.0 6.0 6.0 6.0 6.0 8500 3000 1100 700 600 600 94 168 316 463 500 500 85 151 284 417 450 450 38 67 126 185 200 200 1.0 1.0 1.0 1.0 1.0 1.0 35 0.33 35 1 35 1.5 35 3.3 T 6.8 35 35 10 35 Capacitor22 Class F VDC 85C T = 120Hz KEMET/EIA A/3216-18 T498A334(1)035A(2)E11K A/3216-18 T498A105(1)035A(2)E10K C/6032-28 T498C155(1)035A(2)E3K3 C/6032-28 T498C335(1)035A(2)E1K7 498D/7343-31 X T498D685(1)035A(2)E900 227 D/7343-31 T498D106(1)035A(20E700 Capacitance T498X226(1)035A(2)E500 SeriesX/7343-43Case Size Codefor(pF) (See below KEMET/EIA part options) 0.1 0.4 0.5 1.2 M 2.4 3.5 Capacitance 7.7 Tolerance Amps K+25C = 10% DF Maximum Allowable Ripple Current ESR Moisture Sensitivity +25C 120Hz +25C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz % Max mOhms mAmps mAmps mAmps 6.0 2100 201 181 80 6.0 1800 217 195 87 6.0 1300 291 262 116 6.0 1700 224 202 90 6.0 800 371 334 148 8.0 600 500 450 200 Temp260C J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 4.0 11000 83 75 33 1.0 4.0 10000 87 78 35 1.0 6.0 3300 183 165 73 1.0 6.0 1700 254 229 102 1.0 010 A E500 163 6.0 900 408 T 367 1.0 6.0 700 463 417 185 1.0 Failure Packaging1.0 6.0 500 Rate/ 574 Material 517 ESR Code230 Voltage Lead Design % Max mOhms mAmps mAmps mAmps (C-Spec) J-STD-020A +25C 100kHzMatte +85C 100kHz +105C 100kHzBlankTemp260C 006 = 6.3V +25C A =100kHz N/A +45C T = 100% E = ESR = 7" High A = 3216-18 First two digits Rated Tantalum RatedTemperature Case Code/ Part B = 3258-19KEMET represent M DC = 20% 010DF = 10V Voltage Cap 150C Case Size Leakage C = 6032-25 Number significant 015 = 15V D = 7343-31 figures. Third 020 = 20V X = 7343-43 digit specifies 025 = 25V Other part number options: number zeros. in M (20% tolerance). 035 = 35V Where the 10th character equal to K (10% tolerance) is alsoofavailable 050 = 50V Z = N/A ESR Maximum Tin (Sn) Plated* allowable Last three ripple current G = Gold Plated digits specify ESR in mOhms. (500 = 500mOhms) Moisture Reel 7280 = 13" Sensitivity Reel Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance). Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H) Also available on large (13 inch) reels. Add 7280 to the end of the part number. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. T2012-1 * 10/15/2010 5 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Table 1 - Ratings & Part Number Reference con't Rated Voltage Rated Cap 85C VDC 35 120Hz F 33 50 50 VDC 85C 3.3 10 F 120Hz Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage (See below for part options) T498X336(1)035A(2)E500 +25C Amps 11.6 KEMET/EIA T498D335(1)050A(2)E1K1 T498D106(1)050A(2)E1K0 (See below for part options) 1.7 5.0 Amps +25C 6.0 6.0 % Max +25C Case Code/ Case Size KEMET Part Number DC Leakage DF ESR KEMET/EIA X/7343-43 D/7343-31 D/7343-31 DF Maximum Allowable Ripple Current ESR +25C 120Hz +25C 100kHz +25C 100kHz +85C 100kHz +125C 100kHz % Max mOhms mAmps mAmps mAmps 6.0 500 574 517 230 1100 369 332 148 1000 387 348 155 mOhms mAmps mAmps mAmps +25C 100kHz +45C 100kHz +85C 100kHz +105C 100kHz Maximum allowable ripple current T 498 X 227 M 010 A T E500 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Code High Temperature 150C A = 3216-18 B = 3258-19 C = 6032-25 D = 7343-31 X = 7343-43 T = 100% Matte Tin (Sn) Plated* G = Gold Plated E = ESR Last three digits specify ESR in mOhms. (500 = 500mOhms) T= Tantalum Moisture Sensitivity First two digits K = 10% 006 = 6.3V represent M = 20% 010 = 10V significant 015 = 15V figures. Third 020 = 20V Other part number options: digit specifies 025 = 25V number of zeros. 035 = 35V Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance). 050 = 50V A = N/A Z = N/A Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance). Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H) Also available on large (13 inch) reels. Add 7280 to the end of the part number. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. Temp260C J-STD-020D 1.0 1.0 1.0 J-STD-020A Temp260C Moisture Sensitivity Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel T2012-1 * 10/15/2010 6 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Recommended Voltage Derating Guidelines % Working Voltage 120% 100% 80% 60% 40% % Change in Working DC Voltage with Temperature 67% Recommended Maximum Application Voltage (As % of Rated Voltage) 33% 20% 0% -55 25 85 Temperature (C) 125 150 Ripple Current/Ripple Voltage Case Code KEMET A B C D X E R S T U V T510X T510E EIA 3216-18 3528-21 6032-28 7343-31 7343-43 7260-38 2012-12 3216-12 3528-12 6032-15 7343-20 7343-43 7260-38 Maximum Power Dissipation (Pmax) mWatts @ 25C w/+20C Rise 75 85 110 150 165 200 25 60 70 90 125 270 285 25C 1.00 Temperature Compenstion Multipliers for Maximum Power Dissipation 85C 0.90 125C 0.40 150 C* 0.30 175 C** 0.20 T= Environmental Temperature *T498 Only **T499 Only Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = P max/R E(max) = P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 7 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25 C 85 C 125 C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 - Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 B 3258-19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 C 6032-25 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 X 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). Height of these chips may create problems in wave soldering. Land pattern geometry is too small for silkscreen outline. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 8 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Soldering Process T tP Max Ramp Up Rate = 3 C/sec Max Ramp Down Rate = 6 C/sec tL Temperature P KEMET's families of surface mount tantalum capacitors are compatible with wave (single or dual), convection, IR or vapor TL phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's Tsmax recommended profile conditions for convection and IR reflow reflect Tsmin the profile conditions of the IPC/J-STD-020D standard for moisture sensitivety testing. The devices can safely withstand a maximum of three reflow passes at these conditions. 25 Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3mm maximum) dictates care in wave process development. Profile Feature Sn-Pb Assembly Pb-Free Assembly tS 25 C to Peak Time Time/Temperature Soldering Profile Preheat/Soak Temperature Min (TSmin) 100C 150C Temperature Max (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec Ramp-up rate (TL to TP) 3C/sec max 3C/sec max Liquidous temperature (TL) 183C 217C Time above liquidous (tL) 60-150 sec 220C* 235C** 60-150 sec 250C* 260C** 20 sec max 30 sec max Peak Temperature (TP) Time within 5C of max peak temperature (tP) Ramp-down rate (TP to TL) 6C/sec max 6C/sec max Time 25C to peak temperature 6 minutes max 8 minutes max Note 1: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * Case Size D, E, P, Y and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 9 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Capacitor Marking KEMET High Temperature 150C C, D, X Case Sizes HT KEMET Industrial Grade MnO2 Polarity Indicator (+) K Picofarad Code KEMET ID Picofarad Code A6 Internal Code Rated Voltage PWC* PWC* KEMET ID 227 10V 227 10 K 030 Rated Voltage Polarity Indicator (+) 49 * 010 = 30th week of 2010 A Case Size A 155 A1 49 Internal Code K PWC* Polarity Indicator (+) KEMET Industrial Grade MnO2 KEMET ID Voltage PWC* Internal Code Picofarad Code Polarity Indicator (+) 226 K 35V A1 49 KEMET Industrial Grade MnO2 B or C Case Sizes KEMET ID Picofarad Code Voltage PWC* Year V = 2008 W = 2008 X = 2009 A = 2010 B = 2011 1 = Jan 2 = Feb 3 = Mar 4 = Apr 5 = May Month 7 = Jul 8 = Aug 9 = Spt O = Oct N = Nov C = 2012 6 = Jun D = Dec Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 10 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Tape & Reel Packaging Information KEMET's Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Table 4 - Packaging Quantity Case Code KEMET R I S T M U L W Z V A B C D Y X E EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7260-38 Tape Width-mm 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 11 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ODo Po [10 pitches cumulative tolerance on tape 0.2 mm] E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity OD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 5 User Direction of Unreeling Table 5 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 8mm 12mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16mm D1 Min. Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Ref. Note 2 25.0 (0.984) 30 (1.181) S1 Min. Note 3 T Max. T1 Max. 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8mm Single (4mm) 12mm Single (4mm) & Double (8mm) 16mm Triple (12mm) B1 Max. Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Min. F P1 T2 Max W Max A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 0.05 (0.138 0.002) 5.5 0.05 (0.217 0.002) 5.5 0.05 (0.217 0.002) 4.0 0.10 (0.157 0.004) 8.0 0.10 (0.315 0.004) 8.0 0.10 (0.315 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12mm tapes and 10 maximum for 16mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4). (e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket. (f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 12 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8mm 12mm & 16mm 0.1 Newton to 1.0 Newton (10gf to 100gf) 0.1 Newton to 1.3 Newton (10gf to 130gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 30010 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624. Figure 3 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16-200 Bo Maximum Rotation ( 20 10 T) Typical Component Centerline Ao s Tape Width (mm) 8,12 16-56 72-200 Maximum Rotation ( 20 10 5 S) Figure 4 - Maximum Lateral Movement 8mm & 12mm Tape 16mm Tape 0.5 mm maximum 0.5 mm maximum 1.0 mm maximum 1.0 mm maximum Figure 5 - Bending Radius Embossed Carrier R Punched Carrier Bending Radius R (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 13 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Figure 6 - Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (O 40 mm min.) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 7 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size A B Min C D Min 8mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12mm 16mm Variable Dimensions -- Millimeters (Inches) Tape Size N Min 8mm 12mm 16mm 50 (1.969) W1 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com W2 Max 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) W3 Shall accommodate tape width without interference T2012-1 * 10/15/2010 14 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Figure 7 - Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum, Components 100 mm Min. Leader 400 mm Minimum, Top Cover Tape Figure 8 - Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 15 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 16 High Temperature MnO2 Tantalum Surface Mount Capacitors - T498 150C Rated MnO2 Series KEMET Corporation World Headquarters Europe Asia 2835 KEMET Way Simpsonville, SC 29681 Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Northeast Asia Paris, France Tel: 33-1-4646-1009 Shenzhen, China Tel: 86-755-2518-1306 Sasso Marconi, Italy Tel: 39-051-939111 Beijing, China Tel: 86-10-5829-1711 Milan, Italy Tel: 39-02-57518176 Shanghai, China Tel: 86-21-6447-0707 Fort Lauderdale, FL Tel: 954-766-2800 Rome, Italy Tel: 39-06-23231718 Taipei, Taiwan Tel: 886-2-27528585 North America Madrid, Spain Tel: 34-91-804-4303 Southeast Asia Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offices Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 West Chester, PA Tel: 610-692-4642 Central Europe Hong Kong Tel: 852-2305-1168 Singapore Tel: 65-6586-1900 Landsberg, Germany Tel: 49-8191-3350800 Penang, Malaysia Tel: 60-4-6430200 Dortmund, Germany Tel: 49-2307-3619672 Bangalore, India Tel: 91-806-53-76817 Kwidzyn, Poland Tel: 48-55-279-7025 Central Schaumburg, IL Tel: 847-882-3590 Carmel, IN Tel: 317-706-6742 West Milpitas, CA Tel: 408-433-9950 Mexico Zapopan, Jalisco Tel: 52-33-3123-2141 Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Farjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com T2012-1 * 10/15/2010 17