© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1
One WORLD One Brand One Strategy One Focus One Team One KEMET
Benets
• Meets or exceeds EIA standard 535BAAC
• Taped and reeled per EIA 481-1
• Symmetrical, compliant terminations
• Optional gold-plated terminations
• Laser-marked case
• 100% surge current testing
• Complies with AEC-Q200
• Capacitance values of 0.47μF to 220μF
• Tolerances of ±10% and ±20%
• Voltage rating of 6-50 VDC
• 100% steady-state accelerated aging
• Temperature/voltage derating is 2/3 at 150°C
• RoHS compliance and lead-free terminations standard
• Operating temperature range of -55˚C to +150˚C
Applications
Typical applications include decoupling and ltering in industrial
and automotive end applications such as DC/DC converters,
portable electronics, telecommunications, and control units
operating at temperatures up to 150°C.
Overview
The KEMET T498 Series is a high temperature product that
offers optimum performance characteristics in applications
with operating temperatures up to 150°C. Advanced materials
and testing allow this series to perform with a reliability level of
0.5%/1000 hours at rated voltage and temperature. The T498
Series is available in ve standard EIA case sizes with ROHS
compliant terminations as standard.
High Temperature MnO2 Tantalum Surface Mount Capacitors
T498 150°C Rated MnO2 Series
Environmental Compliance
RoHS Compliant (6/6)* according to Directive 2002/95/EC
*When ordered with 100% Sn Solder
SPICE
For a detailed analysis of specic part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 22
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Ordering Information
*See www.kemet.com for Pb Free transition.
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 150°C
Rated Capacitance Range 0.33 μF - 220 μF @ 120 Hz/25°C
Capacitance Tolerance K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 6V - 50V
DF(120Hz) Refer to Part Number Electrical Specication Table
ESR (100kHz) Refer to Part Number Electrical Specication Table
Leakage Current ≤ 0.01CV (µA) at rated voltage after 5 minutes
T 498 X 227 M 010 A T E500
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
High
Temperature
150ºC
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
X = 7343-43
First two digits
represent
signicant
gures. Third
digit species
number of zeros.
K = ±10%
M = ±20%
006 = 6.3V
010 = 10V
015 = 15V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
G = Gold Plated
E = ESR
Last three
digits specify
ESR in
mOhms.
(500 =
500mOhms)
Blank = 7"
Reel 7280 =
13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 33
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Qualication
Test Condition Characteristics
Endurance 150°C @ 2/3 Rated Voltage, 2000 Hrs.
ΔC/C Within ± 10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 150°C @ 0 Volts, 2000 Hrs.
ΔC/C Within ± 10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MIL-STD-202, Method 107, Condition B, mounted, -55°C to
150°C, 1000 cycles
ΔC/C Within ± 5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25ºC,
-55ºC, +25ºC, +85ºC, +150ºC, +25ºC.
+25°C -55°C +85°C +150°C
ΔC/C IL* ± 10% ± 10% ± 20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x Rated Voltage 1000 cycles (150°C,
1.2 x Rated Voltage)
ΔC/C Within ± 5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
Mil-Std-202, Meth. 213, Cond. I, 100G Peak
Mil-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G
Peak
ΔC/C Within ±10 of initial value
DF Within initial limits
DCL Within initial limits
*IL = Initial Limit
Certication
AEC-Q200
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 44
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Electrical Characteristics
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T498B106M010ATE1K8
T498D476M010ATE600
T498X227M010ATE500
Capacitance vs. Frequency
ESR vs. Frequency
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T498B106M010ATE1K8_IMP
T498D476M010ATE600_IMP
T498B106M010ATE1K8_ESR
T498X227M010ATE500_IMP
T498D476M010ATE600_ESR
T498X227M010ATE500_ESR
Dimensions – Millimeters (Inches)
Metric will govern
Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low prole cases do not have a bevel or a notch.
* MIL-C-55365/8 specied dimensions
Case Size Component
KEMET EIA L* W* H* F* ±0.1
±(.004)
S* ±0.3
±(.012)
B* ±0.15
(Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref)
A3216-18
3.2 ± 0.2
(.126 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.6 ± 0.2
(.063 ± .008)
1.2 (.047) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051)
B3528-21
3.5 ± 02
(138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.2
(.075 ± .008)
2.2 (.087) 0.8 (.031) 0.4 (.016)
0.10 ± 0.10
(.004 ± .004)
0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087)
C6032-28
6.0 ± 0.3
(.236 ± .03)
3.2 ± 0.3
(.126 ± .012)
2.5 ± 0.3
(.098 ± .012)
2.2 (.087) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094)
D7343-31
7.3 ± 0.3
(287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(098 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
X7343-43
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012)
2.4 (.094) 1.3 (.051) 0.5 (.020)
0.10 ± 0.10
(.004 ± .004)
1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138)
15
Termination
cutout at
KEMET’s
Option,
either end
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 55
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 120Hz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
% Max
mAmps
mAmps
mAmps
J-STD-020D
6.3 10 B/3528-20 T498B106(1)006A(2)E2K1 0.6 6.0 2100 201 181 80 1.0
6.3 15 B/3528-20 T498B156(1)006A(2)E1K8 0.9 6.0 1800 217 195 87 1.0
6.3 22 C/6032-28 T498C226(1)006A(2)E1K3 1.4 6.0 1300 291 262 116 1.0
6.3 33 B/3528-20 T498B336(1)006A(2)E1K7 2.1 6.0 1700 224 202 90 1.0
6.3 47 C/6032-28 T498C476(1)006A(2)E800 3.0 6.0 800 371 334 148 1.0
6.3 100 D/7343-31 T498D107(1)006A(2)E600 6.3 8.0 600 500 450 200 1.0
10 2.2 A/3216-18 T498A225(1)010A(2)E4K6 0.2 6.0 4600 128 115 51 1.0
10 3.3 A/3216-18 T498A335(1)010A(2)E3K6 0.3 6.0 3600 144 130 58 1.0
10 4.7 A/3216-18 T498A475(1)010A(2)E2K9 0.5 6.0 2900 161 145 64 1.0
10 4.7 B/3528-20 T498B475(1)010A(2)E2K7 0.5 6.0 2700 177 159 71 1.0
10 10 B/3528-20 T498B106(1)010A(2)E1K8 1.0 6.0 1800 217 195 87 1.0
10 15 B/3528-20 T498B156(1)010A(2)E1K5 1.5 6.0 1500 238 214 95 1.0
10 15 C/6032-28 T498C156(1)010A(2)E1K8 1.5 6.0 1800 247 222 99 1.0
10 22 B/3528-20 T498B226(1)010A(2)E1K5 2.2 6.0 1500 238 214 95 1.0
10 22 C/6032-28 T498C226(1)010A(2)E1K1 2.2 6.0 1100 316 284 126 1.0
10 47 D/7343-31 T498D476(1)010A(2)E600 4.7 6.0 600 500 450 200 1.0
10 100 D/7343-31 T498D107(1)010A(2)E600 10.0 8.0 600 500 450 200 1.0
10 220 X/7343-43 T498X227(1)010A(2)E500 22.0 8.0 500 574 517 230 1.0
16 1 A/3216-18 T498A105(1)016A(2)E6K5 0.2 4.0 6500 107 96 43 1.0
16 3.3 A/3216-18 T498A335(1)016A(2)E3K4 0.5 6.0 3400 149 134 60 1.0
16 4.7 B/3528-20 T498B475(1)016A(2)E2K1 0.8 6.0 2100 201 181 80 1.0
16 6.8 A/3216-18 T498A685(1)016A(2)E2K6 1.1 6.0 2600 170 153 68 1.0
16 6.8 B/3528-20 T498B685(1)016A(2)E1K8 1.1 6.0 1800 217 195 87 1.0
16 10 B/3528-20 T498B106(1)016A(2)E2K8 1.6 6.0 2800 174 157 70 1.0
16 10 C/6032-28 T498C106(1)016A(2)E1K4 1.6 6.0 1400 280 252 112 1.0
16 15 C/6032-28 T498C156(1)016A(2)E1K1 2.4 6.0 1100 316 284 126 1.0
16 22 C/6032-28 T498C226(1)016A(2)E1K0 3.5 6.0 1000 332 299 133 1.0
16 33 D/7343-31 T498D336(1)016A(2)E600 5.3 6.0 600 500 450 200 1.0
16 47 D/7343-31 T498D476(1)016A(2)E600 7.5 6.0 600 500 450 200 1.0
16 68 D/7343-31 T498D686(1)016A(2)E600 10.9 6.0 600 500 450 200 1.0
16 100 X/7343-43 T498X107(1)016A(2)E100 16.0 8.0 100 1285 1157 514 1.0
20 1 A/3216-18 T498A105(1)020A(2)E5K9 0.2 0.5 5900 113 102 45 1.0
20 10 C/6032-28 T498C106(1)020A(2)E1K1 2.0 2.0 1100 316 284 126 1.0
25 0.47 A/3216-18 T498A474(1)025A(2)E8K5 0.1 4.0 8500 94 85 38 1.0
25 2.2 B/3528-20 T498B225(1)025A(2)E3K0 0.6 6.0 3000 168 151 67 1.0
25 10 C/6032-28 T498C106(1)025A(2)E1K1 2.5 6.0 1100 316 284 126 1.0
25 15 D/7343-31 T498D156(1)025A(2)E700 3.8 6.0 700 463 417 185 1.0
25 22 D/7343-31 T498D226(1)025A(2)E600 5.5 6.0 600 500 450 200 1.0
25 33 D/7343-31 T498D336(1)025A(2)E600 8.3 6.0 600 500 450 200 1.0
35 0.33 A/3216-18 T498A334(1)035A(2)E11K 0.1 4.0 11000 83 75 33 1.0
35 1 A/3216-18 T498A105(1)035A(2)E10K 0.4 4.0 10000 87 78 35 1.0
35 1.5 C/6032-28 T498C155(1)035A(2)E3K3 0.5 6.0 3300 183 165 73 1.0
35 3.3 C/6032-28 T498C335(1)035A(2)E1K7 1.2 6.0 1700 254 229 102 1.0
35 6.8 D/7343-31 T498D685(1)035A(2)E900 2.4 6.0 900 408 367 163 1.0
35 10 D/7343-31 T498D106(1)035A(20E700 3.5 6.0 700 463 417 185 1.0
35 22 X/7343-43 T498X226(1)035A(2)E500 7.7 6.0 500 574 517 230 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
% Max
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
T 498 X 227 M 010 A T E500
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
High
Temperature
150ºC
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
006 = 6.3V
010 = 10V
015 = 15V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
G = Gold Plated
E = ESR
Last three
digits specify
ESR in
mOhms.
(500 =
500mOhms)
Blank = 7"
Reel 7280 =
13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 66
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Rated
Voltage
Rated
Cap
Case
Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum Allowable
Ripple Current
Moisture
Sensitivity
85ºC
120Hz
KEMET/EIA (See below for
part options)
+25ºC
+25ºC 120Hz
+25ºC 100kHz
+85ºC 100kHz
+125ºC 100kHz
Temp≤260ºC
VDC
µF
µAmps
% Max
mAmps
mAmps
mAmps
J-STD-020D
35 33 X/7343-43 T498X336(1)035A(2)E500 11.6 6.0 500 574 517 230 1.0
50 3.3 D/7343-31 T498D335(1)050A(2)E1K1 1.7 6.0 1100 369 332 148 1.0
50 10 D/7343-31 T498D106(1)050A(2)E1K0 5.0 6.0 1000 387 348 155 1.0
VDC
µF
KEMET/EIA (See below for
part options)
µAmps
% Max
mAmps
mAmps
mAmps
J-STD-020A
85ºC
120Hz
+25ºC
+25ºC
+45ºC 100kHz
+85ºC 100kHz
+105ºC 100kHz
Temp≤260ºC
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
DC
Leakage DF ESR Maximum allowable
ripple current
Moisture
Sensitivity
Other part number options:
Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance).
Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance).
Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H)
Also available on large (13 inch) reels. Add 7280 to the end of the part number.
Table 1 – Ratings & Part Number Reference con't
Roll Over for
Order Info.
T 498 X 227 M 010 A T E500
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/
Design Lead Material ESR Code Packaging
(C-Spec)
T =
Tantalum
High
Temperature
150ºC
A = 3216-18
B = 3258-19
C = 6032-25
D = 7343-31
X = 7343-43
First two digits
represent
signi cant
gures. Third
digit speci es
number of zeros.
K = ±10%
M = ±20%
006 = 6.3V
010 = 10V
015 = 15V
020 = 20V
025 = 25V
035 = 35V
050 = 50V
A = N/A
Z = N/A
T = 100% Matte
Tin (Sn) Plated*
G = Gold Plated
E = ESR
Last three
digits specify
ESR in
mOhms.
(500 =
500mOhms)
Blank = 7"
Reel 7280 =
13" Reel
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 77
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Recommended Voltage Derating Guidelines
Ripple Current/Ripple Voltage
T= Environmental Temperature
*T498 Only
**T499 Only
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
Pmax = maximum power dissipation(watts)
R = ESR at specied frequency (ohms)
Case Code
Maximum Power Dissipation (Pmax)
mWatts @ 25°C w/+20°C Rise
KEMET EIA
A 3216-18 75
B 3528-21 85
C 6032-28 110
D 7343-31 150
X 7343-43 165
E 7260-38 200
R 2012-12 25
S 3216-12 60
T 3528-12 70
U 6032-15 90
V 7343-20 125
T510X 7343-43 270
T510E 7260-38 285
Temperature Compenstion Multipliers
for Maximum Power Dissipation
≤25°C 85°C 125°C 150° C* 175° C**
1.00 0.90 0.40 0.30 0.20
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125 150
% Working Voltage
Temperature (ºC)
% Change in Working DC Voltage
with Temperature
Recommended Maximum
Application Voltage (As % of
Rated Voltage)
67%
33%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 88
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identied on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Density Level A:
Maximum (Most) Land
Protrusion (mm)
Density Level B:
Median (Nominal) Land
Protrusion (mm)
Density Level C:
Minimum (Least) Land
Protrusion (mm)
Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2
A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00
B 3258-19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20
C 6032-25 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60
D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
X¹ 7343-43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder
processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualication
testing based on the conditions outlined in IPC standard 7351 (IPC-7351).
¹ Height of these chips may create problems in wave soldering.
² Land pattern geometry is too small for silkscreen outline.
Temperature Permissible Transient Reverse Voltage
25° C 15% of Rated Voltage
85° C 5% of Rated Voltage
125° C 1% of Rated Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 99
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Time
Temperature
T
smin
25° C to Peak
t
L
t
S
25
t
P
T
smax
T
L
T
P
Max Ramp Up Rate = 3° C/sec
Max Ramp Down Rate = 6° C/sec
Soldering Process
KEMET’s families of surface mount tantalum capacitors are
compatible with wave (single or dual), convection, IR or vapor
phase reow techniques. Preheating of these components
is recommended to avoid extreme thermal stress. KEMET's
recommended prole conditions for convection and IR reow reect
the prole conditions of the IPC/J-STD-020D standard for moisture
sensitivety testing. The devices can safely withstand a maximum of
three reow passes at these conditions.
Note that although the X/7343-43 case size can withstand wave
soldering, the tall prole (4.3mm maximum) dictates care in wave
process development.
Time/Temperature Soldering Prole
Prole Feature Sn-Pb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Min (TSmin) 100°C 150°C
Temperature Max (TSmax) 150°C 200°C
Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec
Ramp-up rate (TL to TP) 3°C/sec max 3°C/sec max
Liquidous temperature (TL) 183°C 217°C
Time above liquidous (tL) 60-150 sec 60-150 sec
Peak Temperature (TP)
220°C*
235°C**
250°C*
260°C**
Time within 5°C of max peak
temperature (t
P
)20 sec max 30 sec max
Ramp-down rate (TP to TL) 6°C/sec max 6°C/sec max
Time 25°C to peak temperature 6 minutes max 8 minutes max
Note 1: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
* Case Size D, E, P, Y and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z
Construction
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire
Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1010
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Capacitor Marking
C, D, X Case Sizes
A Case Size B or C Case Sizes
PWC*
Year Month
V = 2008 1 = Jan 7 = Jul
W = 2008 2 = Feb 8 = Aug
X = 2009 3 = Mar 9 = Spt
A = 2010 4 = Apr O = Oct
B = 2011 5 = May N = Nov
C = 2012 6 = Jun D = Dec
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not
exceed 60% relative humidity. In addition, temperature uctuations should be minimized to avoid condensation on the parts, and
atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used
promptly, preferably within three years of receipt.
KEMET High
Temperature
150C
Rated
Voltage
227
10 K
030
Polarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
* 010 = 30
th
week of 2010
HT
KEMET
Industrial
Grade
MnO2
Rated
Voltage
227
10V
Polarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
K
A6 49 Internal Code
KEMET
Industrial
Grade
MnO2
PWC*
A 155
A1 49
Polarity
Indicator (+)
Voltage
KEMET ID
Internal Code
K
Picofarad Code
KEMET
Industrial
Grade
MnO2
PWC*
226
35V
A1 49
Polarity
Indicator (+)
Picofarad Code
KEMET ID
Internal Code
K
Voltage
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1111
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Tape & Reel Packaging Information
KEMET’s Molded Tantalum and Aluminum Chip Capacitor families
are packaged in 8 mm and 12 mm plastic tape on 7" and 13"
reels, in accordance with EIA Standard 481-1: Taping of Surface
Mount Components for Automatic Handling. This packaging
system is compatible with all tape fed automatic pick and place
systems.
Table 4 – Packaging Quantity
Case Code Tape
Width-mm 7" Reel* 13" Reel*
KEMET EIA
R
2012-12
8
2,500
10,000
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M
3528-15
8
2,000
8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C
6032-28
12
500
3,000
D
7343-31
12
500
2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E
7260-38
12
500
2,000
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1212
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Table 5 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Min.
Note 1 E1P0 P2
R Ref.
Note 2
S
1
Min.
Note 3 T Max. T1 Max.
8mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ± 0.10
(0.069 ± 0.004)
4.0 ± 0.10
(0.157 ± 0.004)
2.0 ± 0.05
(0.079 ± 0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12mm 1.5
(0.059)
30
(1.181)
16mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Max.
Note 4
E2 Min. F P1 T2 Max W Max A0,B0 & K0
8mm Single (4mm) 4.35
(0.171)
6.25
(0.246)
3.5 ± 0.05
(0.138 ± 0.002)
4.0 ± 0.10
(0.157 ± 0.004)
2.5
(0.098)
8.3
(0.327)
Note 512mm
Single (4mm) &
Double (8mm)
8.2
(0.323)
10.25
(0.404)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
4.6
(0.181)
12.3
(0.484)
16mm Triple (12mm) 12.1
(0.476)
14.25
(0.561)
5.5 ± 0.05
(0.217 ± 0.002)
8.0 ± 0.10
(0.315 ± 0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4).
(e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket.
(f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements.
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 5
[10 pitches cumulative
tolerance on tape ±0.2 mm]
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1313
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 3 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation ( °
T)
8,12 20
16-200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16-56 10
72-200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 4 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8mm & 12mm Tape
1.0 mm maximum
1.0 mm maximum
16mm Tape
Figure 5 – Bending Radius
RR
Bending
Radius
Embossed
Carrier
Punched
Carrier
Tape Width Peel Strength
8mm 0.1 Newton to 1.0 Newton (10gf to 100gf)
12mm & 16mm 0.1 Newton to 1.3 Newton (10gf to 130gf)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1414
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Figure 6 – Reel Dimensions
Table 7 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Min C D Min
8mm
178 ± 0.20
(7.008 ± 0.008)
or
330 ± 0.20
(13.000 ± 0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12mm
16mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Min W1 W2 Max W3
8mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm min.)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1515
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Figure 7 – Tape Leader & Trailer Dimensions
Trailer
160 mm minimum,
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm Min.
Leader
400 mm Minimum,
Figure 8 – Maximum Camber
Carrier Tape
Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1616
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
Other KEMET Resources
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering
Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2012-1 • 10/15/2010 1717
High Temperature MnO2 Tantalum Surface Mount Capacitors – T498 150°C Rated MnO2 Series
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Schaumburg, IL
Tel: 847-882-3590
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39-051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.