Flat Cable EMI Suppression Cores (2643166651)
Part Number: 2643166651
43 SPLIT FLAT CABLE CORE
Explanation of Part Numbers:
– Digits 1 & 2 = Product Class
Digits 3 & 4 = Material Grade
Flat cable suppression core can accommodate multi- conductors flat cables, in widths from 12.7 mm (0.500) up to 77 mm
(3.0). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz to hundreds
of MHz.
Clip Part Number: 0199001401 , 0199016551
Our Expanded Cable & Suppressor Kit (part number 0199000005) contains a selection of these flat cable cores and clips.
Flat Cable Cores are available in selected sizes in the Flex Circuit & Ribbon Cable Core Kit (part number 0199000038).
Assembly clips are available for most of the split flat cable cores. See section Flat Cable Cores Assembly clips.
Catalog Drawing
3D Model
Weight: 36 (g)
Chart Legend
+ Test frequency
•For assembly clips see Flat Cable Cores Assembly Clips
Typical Impedance (Ω)
10 MHz 65
25 MHz+109
100 MHz+223
250 MHz 390
Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified
for the + marked frequencies. The minimum impedance is listed on our catalog drawing.
Dim mm mm tol nominal inch inch misc.
A 45.1 ±0.75 1.776 _
B 34.4 ±0.70 1.354 _
C 28.6 ±0.70 1.126 _
D 6.35 ±0.25 0.25 _
E 0.85 ±0.20 0.033 _
Cable Information
Max
Diameter Max
Dimension Solid
Equivalent Flat Cable
Cores
0
033.70 x 1.30 _ -
Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified
for the + marked frequencies. The minimum impedance is listed on our catalog drawing.
Catalog Drawing
Centered, single turn impedance tests for the 31 and 43 material parts are performed on the E4990A Impedance Analyzer. All
tests are made with the shortest practical wire length.
Fair- Rite Products Corp. One Commercial Row, Wallkill, New York 12589-0288
888-324-7748 845-895-2055 Fax: 845-895-2629 ferrites@fair- rite.com www.fair- rite.com