INTEGRATED CIRCUITS 74LVC08A Quad 2-input AND gate Product specification IC24 Data Handbook 1997 Jun 30 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A FEATURES DESCRIPTION * Wide supply voltage range of 1.2 V to 3.6 V * In accordance with JEDEC standard no. 8-1A * Inputs accept voltages up to 5.5 V * CMOS low power consumption * Direct interface with TTL levels The 74LVC08A is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in a mixed 3.3 V/5 V environment. The 74LVC08A provides the 2-input AND function. QUICK REFERENCE DATA GND = 0 V; Tamb = 25C; tr = tf 2.5 ns PARAMETER SYMBOL tPHL/tPLH Propagation delay nA, nB to nY CI Input capacitance CPD CONDITIONS CL = 50 pF; VCC = 3.3 V Power dissipation capacitance per gate Notes 1 and 2 TYPICAL UNIT 2.6 ns 5.0 pF 28 pF NOTES: 1. CPD is used to determine the dynamic power dissipation (PD in W) PD = CPD x VCC2 x fi (CL x VCC2 x fo) where: fi = input frequency in MHz; CL = output load capacity in pF; fo = output frequency in MHz; VCC = supply voltage in V; (CL x VCC2 x fo) = sum of the outputs. 2. The condition is VI = GND to VCC. ORDERING INFORMATION PACKAGES TEMPERATURE RANGE OUTSIDE NORTH AMERICA NORTH AMERICA DWG NUMBER 14-Pin Plastic SO -40C to +85C 74LVC08A D 74LVC08A D SOT108-1 14-Pin Plastic SSOP Type II -40C to +85C 74LVC08A DB 74LVC08A DB SOT337-1 14-Pin Plastic TSSOP Type I -40C to +85C 74LVC08A PW 74LVC08APW DH SOT402-1 PIN CONFIGURATION LOGIC SYMBOL 1A 1 14 VCC 1B 2 13 4B 1Y 3 12 4A 2A 4 11 4Y 2B 5 10 3B 2Y 6 9 3A GND 7 8 3Y 1 2 1A 1B 1Y 3 4 5 2A 2B 2Y 6 9 10 3A 3B 3Y 8 12 13 4A 4B 4Y 11 SV00435 SY00034 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION 1, 4, 9, 12 1A - 4A 2, 5, 10, 13 1B - 4B 3, 6, 8, 11 1Y - 4Y Data outputs 7 GND Ground (0 V) 14 VCC Positive supply voltage 1997 Jun 30 Data inputs 2 853-1996 18167 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A LOGIC SYMBOL (IEEE/IEC) LOGIC DIAGRAM (ONE GATE) A & 1 2 3 4 5 & 9 10 & 12 13 & Y B SV00415 6 FUNCTION TABLE 8 INPUTS 11 SV00436 OUTPUTS nA nB nY L L H H L H L H L L L H NOTES: H = HIGH voltage level L = LOW voltage level RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL PARAMETER CONDITIONS MIN MAX UNIT VCC DC supply voltage (for max. speed performance) 2.7 3.6 V VCC DC supply voltage (for low-voltage applications) 1.2 3.6 V 0 5.5 V VI DC input voltage range VO DC output voltage range; output HIGH or LOW state Tamb Operating ambient temperature range in free-air tr, tf Input rise and fall times 0 VCC V -40 +85 C 0 0 20 10 ns/V VCC = 1.2 to 2.7V VCC = 2.7 to 3.6V ABSOLUTE MAXIMUM RATINGS1 In accordance with the Absolute Maximum Rating System (IEC 134). Voltages are referenced to GND (ground = 0V). SYMBOL VCC PARAMETER CONDITIONS UNIT -0.5 to +6.5 V IIK DC input diode current VI t 0 -50 mA VI DC input voltage Note 2 -0.5 to +6.5 V IOK DC output diode current VO uVCC or VO t 0 VO DC output voltage; output HIGH or LOW state Note 2 IO DC output source or sink current VO = 0 to VCC IGND, ICC Tstg PTOT DC supply voltage RATING DC VCC or GND current Storage temperature range Power dissipation per package - plastic mini-pack (SO) - plastic shrink mini-pack (SSOP and TSSOP) above +70C derate linearly with 8 mW/K above +60C derate linearly with 5.5 mW/K "50 mA -0.5 to VCC +0.5 V "50 mA "100 mA -65 to +150 C 500 500 mW NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 1997 Jun 30 3 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A DC CHARACTERISTICS Over recommended operating conditions. Voltages are referenced to GND (ground = 0V). LIMITS SYMBOL PARAMETER TEST CONDITIONS Temp = -40C to +85C TYP1 MIN VIH HIGH level Input voltage VIL LOW level Input voltage VOH O ICC ICC VCC = 2.7 to 3.6V 2.0 MAX V GND VCC = 2.7 to 3.6V LOW level output voltage II VCC VCC = 1.2V HIGH level output voltage VOL VCC = 1.2V UNIT V 0.8 VCC = 2.7V; VI = VIH or VIL; IO = -12mA VCC*0.5 VCC = 3.0V; VI = VIH or VIL; IO = -100A VCC*0.2 VCC = 3.0V; VI = VIH or VIL; IO = -18mA VCC*0.6 VCC = 3.0V; VI = VIH or VIL; IO = -24mA VCC*0.8 VCC V VCC = 2.7V; VI = VIH or VIL; IO = 12mA 0.40 VCC = 3.0V; VI = VIH or VIL; IO = 100A 0.20 VCC = 3.0V; VI = VIH or VIL; IO = 24mA 0.55 Input leakage current 6V; VI = 5 5V or GND VCC = 3 3.6V; 5.5V Quiescent supply current VCC = 3.6V; VI = VCC or GND; IO = 0 Additional quiescent supply current per input pin VCC = 2.7V to 3.6V; VI = VCC -0.6V; IO = 0 V "0 1 "0.1 "5 A 0.1 10 A 5 500 A NOTE: 1. All typical values are at VCC = 3.3V and Tamb = 25C. AC CHARACTERISTICS GND = 0 V; tr = tf v 2.5 ns; CL = 50 pF LIMITS SYMBOL PARAMETER tPHL/ tPLH VCC = 3.3V 0.3V WAVEFORM Propagation delay nA, nB to nY VCC = 2.7V MIN MAX MIN TYP MAX TYP 1.5 2.6 5.1 1.5 3.0 6.1 16 1, 2 UNIT VCC = 1.2V TYP1 ns NOTE: 1. These typical values are at VCC = 3.3V and Tamb = 25C. AC WAVEFORMS TEST CIRCUIT VM = 1.5 V at VCC w 2.7 V VM = 0.5 VCC at VCC < 2.7 V VOL and VOH are the typical output voltage drop that occur with the output load. PULSE GENERATOR Vl nA, nB INPUT 2 < VCC Open GND 500 VO VI D.U.T. VM RT GND t PHL S1 VCC CL 50pF 500 t PLH VOH nY OUTPUT VOL VM SV00414 Waveform 1. Input (nA, nB) to output (nY) propagation delays. VCC VI t 2.7V VCC 2.7V - 3.6V 2.7V Test S1 tPLH/tPHL Open SY00077 Waveform 2. Load circuitry for switching times. 1997 Jun 30 4 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A SO14: plastic small outline package; 14 leads; body width 3.9 mm 1997 Jun 30 5 SOT108-1 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm 1997 Jun 30 6 SOT337-1 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm 1997 Jun 30 7 SOT402-1 Philips Semiconductors Product specification Quad 2-input AND gate 74LVC08A DEFINITIONS Data Sheet Identification Product Status Definition Objective Specification Formative or in Design This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. Preliminary Specification Preproduction Product This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product Specification Full Production This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product. Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 print code Document order number: 1997 Jun 30 8 Date of release: 05-96 9397-750-04481