2010 Thin Film Chip Resistor Standard Grade, Surface Mount, Solderable PROTECTIVE ENCAPSULANT FEATURES PRECISION THIN FILM RESISTOR 99.6% ALUMINA CHIP WRAPAROUND TERMINATIONS PRETINNED * Tolerances to 0.1% * Operating temperature range : -55 C to +150 C * Pretinned (Sn60) nickel barrier terminations * TCR's to 25 ppm * Made with the same materials and process as our MIL-PRF-55342 "S" level qualified chips * Suitable for solder reflow, vapor phase, or wave solder attachment PERFORMANCE CHARACTERISTICS Resistance Range (1) Tolerances (2) Maximum Power Maximum Voltage 5W-3.5MW 0.1%, 0.25%, 0.5%, 1%, 2%, 5%, 10% 800 mW 150 Volts CURRENT NOISE POWER DISSIPATION ENVIRONMENTAL PERFORMANCE (3) TCR (-55 to +125 C in ppm/C) Thermal Shock Low Temperature Operation Short-time Overload Resistance to Bonding Exposure Moisture Resistance High Temperature Exposure Life < 25 ppm 0.02% 0.02% 0.02% 0.02% 0.03% 0.03% See Chart TYPICAL LIFE TEST PERFORMANCE POWER DERATING (1) SOTA offers milliohm and high megohm resistors with excellent performance. (2) 0.5% in limited availability (3) Typical resistance change, the maximum is the same as MIL-PRF-55342. Test methods are per MIL-PRF-55342. PART NUMBERING MECHANICAL S2010CA 150 J H B TCR E: 25 ppm H: 50 ppm K: 100 ppm TOLERANCES B: 0.1% C: 0.25% D: 0.5% F: 1% G: 2% J: 5% K: 10% M: 20% RESISTANCE VALUE Three or four digits are used with all leading digits significant. Four digits are used for 1% tolerance or lower, otherwise three digits are used. The last digit specifies the number of zeros to add. The letter "R" is used to represent the decimal for fractional ohmic values. Example: 5R6 is 5.6 ohms. Length Width Thickness Top Term. Bottom Term. INCHES .205 (+.010/-.005) .100 (+.003/-.007) .025 - .030 .015 - .040 .015 - .040 MM 5.21 (+.25/-.13) 2.54 (+.08/-.17) .64 - .76 .38 - 1.02 .38 - 1.02 Approx. Weight .0323 grams Solderability: Solder coating compatible with Sn60, 62 or 63 solders, provides good wetting with all types of solder attachment. All product is tested IAW Mil-Std-202, method 208, including 8 hour steam aging. OPTIONS PACKAGING Three packaging options are available: * Bulk Packaging - (1400 per Bag Max.) * Waffle Pack - (60 per Tray Max.) * Tape & Reel - (4000 per Reel Max.) SOTA offers a full line of component parts in the 2010 size including Military (MIL-PRF-55342 "S" level) and HighReliability (customer specified testing). Available options are epoxy bondable and wire bondable terminations, custom part marking, and untrimmed resistors. STATE OF THE ART, INC. 2470 Fox Hill Road, State College, PA 16803-1797 Phone (814) 355-8004 Fax (814) 355-2714 Toll Free 1-800-458-3401 Where Quality Isn't a Goal...It's Our Tradition 10/01/97