CE 1N4001 THRU 1N4007
CHENYI ELECTRONICS GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0Ampere
FEATURES
. The plastic package carries Underwrites Laboratory
Flammability Classification 94V-0
. Construction utilizes void-free molded plastic technique
. Low reverse leakage
. High forward surge current capability
. High temperature soldering guaranteed: 250 /10 seconds,
0.375"(9.5mm)lead length,5lbs.(2.3kg).
MECHANICAL DATA
. Case: JEDEC DO-41 molded plastic body
. Terminals: lead solderable per MIL-STD-750,method 2026
. Polarity: color band denotes cathode end
. Mounting Position: Any
. Weight: 0.012 ounce, 0.33 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25 ambient temperature unless otherwise specified,Single phase,half wave 60Hz,resistive or inductive)
load. For capacitive load,derate by 20%)
Symbols 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Units
Maximum reurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum average forward rectified
current 0.375"(9.5mm)lead length at TA=75
Peak forward surge current 8.3ms half
sing-wave superimposed on rated load
(JEDEC method)TA=75
Maximum instantaneous forward voltage at 1.0 A VFVolts
Maximum reverse TA=25
current at rated DC blocking voltage TA=100 R JA
R JL
Typical junction Capacitance(Note 1) CJpF
Maximum DC Blocking Voltage temperature TA
TJ
TSTG
Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V DC
2.Thermal resistance from juntion to ambient and from junction lead at 0.375"(9.5mm)lead length,
P.C.B. Mounted
I(AV) 1.0 Amp
IFSM 30.0 Amps
1.1
Operating and storage temperature range -50 to +175
+150
15.0
A
Typeical thermal resistance(Note 2) /W
IR5.0
50.0
50.0
25.0
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 1 of 2
CE 1N4001 THRU 1N4007
CHENYI ELECTRONICS GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0Amperes
RATINGS AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007
FIG.2-TYPICAL INSTANTANEOUS FORWARD
FLG.1-FORWARD CURRENT DERATING CURVE CHARACTERISTICS
FIG.3-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
FIG.4-TYPICAL REVERSE CHARACTERISTICS
FIG.5-TYPICAL JUNCTION CAPACITANCE
Copyright @ 2000 SHANGHAI CHENYI ELECTRONICS CO.,LTD Page 2 of 2