6
www.vishay.com Vishay Spectrol
Revision: 05-Aug-13 1Document Number: 57014
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Snap-On Panel Mount Adapters
Vishay Spectrol’s standard 3/4" and 1 - 1/4" rectangular trimming potentiometers, the Models 43 and 70, may be
easily panel mounted through the use of Vishay Spectrol Model 6 panel mount adapters. The adapters are designed
to convert these standard trimmer models into panel mount trimmers in a quick, convenient, and economical manner.
Assembly with the trimmer is accomplished by snap-in, providing for minimal installation time.
DIMENSIONS in inches (millimeters)
ACTUAL SIZES6-1-0
6-1-0-P
6-2-0
MODEL 6
SHAFT INSERTED INTO REAR OF BUSHING
TRIMMER INSERTED INTO REAR OF MODEL 6
HOUSING AND SNAPS INTO ASSEMBLED POSITION
BLADE ENGAGES TRIMMER SCREWDRIVER SHAFT SLOT
0.900 ± 0.031
(23)
0.295 ± 0.010
(7.50)
12-28 NF
0.246
(6.25)
0.366
(9.30) 1.44
(3.66)
0.916
(23.27)
0.235
(5.97)
0.246
(6.25)
0.366
(9.30)
0.144
(3.66)
Ø 0.141
(3.58)
0.123
(3.12)
M6 × 0.75
0.166 (4.22) 0.155 (3.94)
0.128
(3.25)
0.366
(9.3)
1.400 ± 0.031
(35.5)
0.295 ± 0.010
(7.50)
12-28 NF
0.260 ± 0.031
(6.60)
0.395 ± 0.031
(10)
6
www.vishay.com Vishay Spectrol
Revision: 05-Aug-13 2Document Number: 57014
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
AVAILABLE SHAFT CONFIGURATIONS
6-1-2
SHAFT DIMENSIONS APPLY TO 6-1-X AND 6-2-X
VERSION
6-1-3
MECHANICAL SPECIFICATIONS
Construction: Molded polyester plastic
Bushing Material: Brass nickel plated
Bushing Hardware: Panel nut and lock washer
Shafts Available (Inches): (1) Flush (2) 0.575 (3) 0.875
See photos and drawings for additional information
PACKAGING
Box of 100 pieces
0.280 ± 0.010
(7.11)
12-28 NF
0.575 ± 0.031
(14.60)
0.280 ± 0.010
(7.11)
12-28 NF
0.118 ± 0.003 Ø
SLOT 0.022 WIDE
x 0.025 DEEP
0.875 ± 0.031
(22.22)
0.280 ± 0.010
(7.11)
12-28 NF
0.118 ± 0.003 Ø
SLOT 0.022 WIDE
x 0.025 DEEP
ORDERING INFORMATION
61 2
MODEL TRIMMER SIZE SHAFT EXTENSION OPTION
1. Fits Vishay Spectrol Model 43
2. Fits Vishay Spectrol Model 70
0. No extra shaft
1. Shaft flush with bushing
2. 0.575 Shaft extension
3. 0.875 Shaft extension
P: Plastic bushing
SAP PART NUMBERING GUIDELINES
ACCTR I ADB3 0 6 1 2
MODEL TOL. PACKAGING
CODE
SPECIAL
(IF APPLICABLE)
See the end of this data book for conversion tables
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
