6GF1130-1BA01 - Siemens - Datasheet.Live

First Steps in Commissioning

SIMATIC

Vision Sensor SIMATIC VS130-2 and

VS 130-2vcr

Getting Started Release 09/2005

Siemens AG

Automation and Drives

Postfach 4848

90437 NÜRNBERG

GERMANY

A5E00475762-01

Siemens AG 2005

Technical data subject to change.

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to

prevent damage to property. The notices referring to your personal safety are highlighted in the manual

by a safety alert symbol, notices referring to property damage only have no safety alert symbol. The

notices shown below are graded according to the degree of danger.

! Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

! Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

! Caution

with a safety alert symbol indicates that minor personal injury can result if proper precautions are not

taken.

Caution

without a safety alert symbol indicates that property damage can result if proper precautions are not

taken.

Notice

indicates that an unintended result or situation can occur if the corresponding notice is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of

danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a

warning relating to property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning

and operation of a device/system may only be performed by qualified personnel. Within the context of

the safety notices in this documentation qualified persons are defined as persons who are authorized to

commission, ground and label devices, systems and circuits in accordance with established safety

practices and standards.

Prescribed Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or components from other manufacturers

which have been approved or recommended by Siemens.

Correct, reliable operation of the product requires proper transport, storage, positioning and assembly

as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG.

The remaining trademarks in this publication may be trademarks whose use by third parties for their

own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and

software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency.

However, the information in this publication is reviewed regularly and any necessary corrections are

included in subsequent editions.

Vision Sensor SIMATIC VS130-2 and VS 130-2vcr - Getting Started

A5E00475762-01 3

Introduction

These instructions guide you through a concrete example illustrating how to read a

code and during which you will become familiar with the basic functions of the

Vision Sensor SIMATIC VS130-2/VS130-2vcr. The references to the manual and

the online help will also help you to get a general overview of the information it

contains.

Depending on your degree of experience, working through the sample will take

between one and two hours.

With the Vision Sensor SIMATIC VS130-2/VS130-2vcr you can capture the

labeling codes of products quickly, reliably, and inexpensively and then send the

read code to a controller or computer.

The Vision Sensor SIMATIC VS130-2 reads data matrix, QR- and PDF417 codes

and operates with overhead lighting. The object is lit from above with the supplied

ring flash.

The Vision Sensor SIMATIC VS130-2vcr reads Vericodes and also operates with

overhead lighting.

Prerequisites

You have completed the installation and wiring based on the accompanying

hardware installation instructions. You have also established 2 connections:

• Connection between PC and processing unit over Ethernet

• A connection from your Web browser (for example Internet Explorer) to the

setup support using the Hyper Text Transfer Protocol (HTTP).

(For more detailed information, refer to the online help)

The following components are available.

Components:

• Trigger signal to trigger evaluation.

• Vision Sensor SIMATIC VS130-2 or VS130-2vcr comprising:

- a sensor head with CCD sensor chip (CCD = Charge Coupled Device) for

sensing the code.

- a processing unit for code evaluation, output of results, PROFIBUS

interfacing, and parameter assignment

- where applicable, an LED overhead lighting unit, red, degree of

protection IP65 as ring flash (order number 6GF9 004-8BA)

- Cables to connect the individual components

- hardware installation instructions for installation and wiring of the

Vision Sensor SIMATIC VS130-2/VS130-2vcr

Vision Sensor SIMATIC VS130-2 and VS 130-2vcr - Getting Started

4 A5E00475762-01

• CD with:

- Vision Sensor SIMATIC VS130-2/VS130-2vcr manual (German and

English)

- Online helps (interfacing the Com Server of W&T, establishing the

connection, setup support)

- Getting Started

- Installation Instructions

- Compact Com Server manual from W&T

- The installation manual SIMATIC S7-300 Automation System, Hardware

and Installation

- PROFINET IO documentation: Getting Started Collection for PROFINET

IO, system manual PROFINET System Description, programming manual

PROFINET IO From PROFIBUS DP to PROFINET IO, product information

PROFINET IO Structure of the Diagnostic Data Records

- the device master data file SIEM8111.GSD and the respective bitmap file

VS1X0__N.DIB (for PROFIBUS DP)

- the GSD file GSDML-V1.0-Siemens-VS130-2-20041021.xml (General

Station Description) and the bitmap file vs100.bmp (for PROFINET I/O)

• an external power supply 24 V DC (2 A)

• a PG/PC

Vision Sensor SIMATIC VS130-2 and VS 130-2vcr - Getting Started

A5E00475762-01 5

Task

During reading, the code is fully within the sensor field of view and is not moving.

Conveying unit

Object

with code

Light barrier

Power

Supply

Sensor head

Ring flash

Processin

Unit

Ethernet (direct or

over network)

PC/PG for setup support and

code output

Vision Sensor SIMATIC VS130-2 and VS 130-2vcr - Getting Started

6 A5E00475762-01

Adjusting the Sensor

Before you commission the Vision Sensor SIMATIC VS130-2/VS130-2vcr, you

must adjust the sensor head correctly using the setup support on a PG / PC. The

setup support shows you an image as seen by the sensor head.

Step Activity Result

1 1. Turn on the PG /PC and wait until the computer

has booted.

2. Turn on the processing unit.

3. Start your Web browser.

4. Enter the IP address of the processing unit.

5. In the dialog that opens, click on Adjust Sensor.

Note: It may take several seconds for the page to

display.

6. Click on the Adjustment button if a dialog other

than the Adjust Sensor dialog is open.

Once the setup support has started,

the sensor field of view is displayed on

your PC/PG monitor. The displayed

image is updated several times per

second.

2 Adjusting the Sensor

1. Bring the code into the image.

2. Focus the code by changing the distance between the sensor and the code.

3. Check that Auto V1 or Auto is set in the Exposure drop-down list box..

4. Optimize the image quality of the code in the image.

As soon as after “Recognition” the message "Successfully finished" appears, the code has

been successfully decoded. You will see the result of the read in the "Result" box.

If the decoding is successful, you will see the weaknesses in the current adjustment at the

bottom right. By eliminating these weaknesses, you can improve the read reliability of the

VS130-2/VS130-2vcr.

Note:

If you have too many errors, clean the lens and diffuser with a lint-free cloth.

3 Secure the sensor and then check the correct sensor position.

Vision Sensor SIMATIC VS130-2 and VS 130-2vcr - Getting Started

A5E00475762-01 7

Sample Codes

Data matrix code

Printed QR code

Printed PDF417 code

Vericode for VS130-2vcr

Vision Sensor SIMATIC VS130-2 and VS 130-2vcr - Getting Started

8 A5E00475762-01