Carling Technologies TG/LTG-Series Rocker Switches TM TG/LTG-Series Rocker Switches The TG-Series Mini Tippette rocker switches are single or double pole and feature an all nylon double-insulated construction. These switches are designed with snap-in mounting for fast, low cost assembly. The illuminated version (LTG) is available with either a paddle or rocker actuator. These AC rated switches are also suitable for low-voltage DC applications in a wide range of markets including Appliance, HVAC, Food service, and Transportation. .055[1.40] DIA .156[3.96] DIA .069[1.75] DIA Dielectric Strength UL/CSA: 1000V - live to dead metal parts Electrical Life 50,000 cycles- maintained 25,000 cycles- momentary Mechanical Life 100,000 cycles Operating Temperature 32F to 150F (0C to +65.6C) 6.000[152.40] .375[9.52] .250[6.35] .500[12.70] .250[6.35] 1.155[29.33] .865[21.97] .050[1.27] .187[4.74] SOLDER LUG .250 TAB (Q.C.) 1.240[31.50] .250[6.35] INTEGRATED WIRE LEAD (no exposed conductors) .187 TAB (Q.C.) TERMINAL TYPE .210[5.33] 1.125[28.57] .812[20.62] .520[13.20] 1.000[25.40] .375[9.52] 1.120[28.45] .994[25.24] PADDLE MOUNTING HOLE Panel Thickness: .030[.762] min. to .250[6.35] max. LTG G O 50 1 - T B - B - R / 125N 1 Base Part Number 2 Circuit 3 Center Position 4 Rating 5 Termination 1 BASE PART NUMBER: SERIES1 TG Double Pole, Non-Lighted LTG Double Pole with Indicator Lights 2 CIRCUIT See Circuit Designation Chart Page 17. 3 CENTER POSITION C Center OFF, Three position O No Center OFF, Two position .250 tab QC 1 B M 1 B 1 7 Actuator Color 8 Base Color .187 tab QC 3 D R 3 D 3 9 Lens Color 10 Lamp Voltage 6 ACTUATOR STYLE P paddle T rocker 7 ACTUATOR COLOR2 B black W white 8 BASE COLOR2 B black W white 9 LENS COLOR3 A amber 4 RATING 40 5A 250VAC, 10A 125VAC, 1/2HP 125-250VAC 41 5A 250VAC, 10A 125VAC 50 10A 250VAC, 15A 125VAC, 3/4HP 125-250VAC 51 10A 250VAC, 15A 125VAC 5 TERMINATION/FUNCTION solder lug ON-NONE-OFF 0 (ON)-NONE-OFF A ON-NONE-(OFF) L ON-NONE-ON 0 ON-NONE-(ON) A ON-OFF-ON 0 6 Actuator Style 10 LAMP VOLTAGE incandescent 6V 6 volt 12V 12 volt 18V 18 volt 24V 24 volt 28V 28 volt C clear R neon 125N 125 volt neon 250N 250 volt neon wire leads 5 F T 5 F 5 NOTES Imprinting is available. Consult factory. Panel Cut-Out Recommendations: For sheet metal panels, switch must enter panel in same direction as the punch. (Burr on bottom.) Test cut hole in actual material. 1 TG available with circuits A, B, C, D, E, F ; LTG available with circuits G, H, I, J, M, N, P, Q, R, T, U, V, Y, Z. See page 17. 2 Custom colors are available. Consult factory. 3 Specify lens color for LTG-Series only. () Indicates momentary function. 14 www.carlingtech.com red