LITE-ON DCC
RELEASE
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C.
Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660
http://www.liteon.com/opto
Photocoupler
Product Data Sheet
MOC3063 SERIES
Spec No.: DS70-2001-026
Effective Date: 04/28/2010
Revision: C
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
BNS-OD-FC001/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
FEATURES
* Isolation voltage between input and output Viso : 5,000Vrms January 2010
* 6pin DIP zero-cross optoisolators triac driver output
* High repetitive peak off-state voltage VDRM : Min. 600V
* High critical rate of rise of off-state voltage
( dv/dt : MIN. 1000V / ļs )
* Dual-in-line package :
MOC3063
* Wide lead spacing package :
MOC3063M
* Surface mounting package :
MOC3063S
* Tape and reel packaging :
MOC3063S-TA1
* Safety approval
UL / CSA / FIMKO / VDE* approved
*Required āVā ordering option
* RoHS compliance
APPLICATIONS
* AC Motor Drives
* AC Motor Starters
* E.M. Contactors
* Lighting Controls
* Solenoid/Valve Controls
* Solid State Relays
* Static Power Switches
* Temperature Controls
Part No. :
MOC3063 SERIES
Page :
1
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
OUTLINE DIMENSIONS
Dual-in-line package :
Wide lead spacing package:
*1. Year date code.
*2. 2-digit work week.
*3. Factory identification mark shall be marked.
(Z : Taiwan, Y : Thailand, X : China-TJ, W : China-CZ)
*4. Model No.: MOC3063
Part No. :
MOC3063 SERIES
Page :
2
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
OUTLINE DIMENSIONS
Surface mounting package :
*1. Year date code.
*2. 2-digit work week.
*3. Factory identification mark shall be marked.
(Z : Taiwan, Y : Thailand, X : China-TJ, W : China-CZ)
*4. Model No.: MOC3063
Part No. :
MOC3063 SERIES
Page :
3
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
TAPING DIMENSIONS
Tape and reel package :
MOC3063S-TA1
Description
Symbol
Dimensions in mm ( inches )
Tape wide
W
16 ļ± 0.3 ( .63 )
Pitch of sprocket holes
P0
4 ļ± 0.1 ( .15 )
Distance of compartment
F
P2
7.5 ļ± 0.1 ( .295 )
2 ļ± 0.1 ( .079 )
Distance of compartment to compartment
P1
12 ļ± 0.1 ( .472 )
Part No. :
MOC3063 SERIES
Page :
4
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
ABSOLUTE MAXIMUM RATING
( Ta = 25ļ°C )
PARAMETER
SYMBOL
RATING
UNIT
INPUT
Forward Current
IF
50
mA
Reverse Voltage
VR
6
V
Power Dissipation
PD
120
mW
OUTPUT
Off-State Output Terminal Voltage
VDRM
600
V
Peak Repetitive Surge Current
( PW=100ļs, 120pps )
ITSM
1
A
Collector Power Dissipation
PC
150
mW
Total Power Dissipation
Ptot
250
mW
*1
Isolation Voltage
Viso
5,000
Vrms
Ambient Operating Temperature Range
TA
-40 ~ +100
ļ°C
Storage Temperature Range
Tstg
-55 ~ +150
ļ°C
*2
Soldering Temperature
TL
260
ļ°C
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector,
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No. :
MOC3063 SERIES
Page :
5
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
ELECTRICAL - OPTICAL CHARACTERISTICS
( Ta = 25ļ°C )
PARAMETER
SYMBOL
MIN.
TYP.
MAX.
UNIT
CONDITIONS
INPUT
Forward Voltage
VF
ā
1.2
1.4
V
IF=20mA
Reverse Current
IR
ā
0.05
10
ļA
VR=6V
OUTPUT
*1
Peak Blocking Current, Either
Direction
IDRM1
ā
ā
500
nA
VDRM = 600V
Peak On-State Voltage, Either
Direction
VTM
ā
ā
3.0
V
ITM=100 mA Peak
*2
Critical rate of Rise of Off-State
Voltage
dv/dt
1000
ā
ā
V/ļs
COUPLED
*3
Led Trigger Current,
Current Required to
Latch Output, Either
Direction
MOC3063
IFT
ā
ā
5
mA
Main Terminal
Voltage = 3V
Holding Current, Either
Direction
IH
ā
400
ā
ļA
ZERO
CROSSING
Inhibit Voltage
VINH
ā
5
20
Volts
IF=Rated IFT, MT1-MT2
Voltage above which
device will not trigger.
Leakage in Inhibited State
IDRM2
ā
ā
500
ļA
IF = Rated IFT, Rated
VDRM, Off State
*1 Test voltage must be applied within dv/dt rating.
*2 This is static dv/dt. Commutating dv/dt is a function of the load-driving thyristor(s) only.
*3 All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore,
recommended operating IF lies between max IFT 5mA for MOC3063 and absolute max IF (50mA)
Part No. :
MOC3063 SERIES
Page :
6
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
CHARACTERISTICS CURVES
Fig.1 Forward Current vs. Fig.2 On-state Current vs. Ambient
Temperature
Fig.4 Forward Current vs. Forward
0-40
60 C
40 C
20 C
Ambient Temperature
Fig.6 Holding Current vs.
Temperature
Fig.5 On-state Voltage vs. Ambient
Fig.3 Minimum Trigger Current
vs. Ambient Temperature
I , on-state current (A)
Ambient temperature Ta ( C) Ambient Temperature Ta ( C)
Ambient temperature ( C)
Ambient temperature Ta ( C) Ambient temperature Ta ( C)
020 40 60 80 100
60
0
0.4
12.0
0.01 20 40 60 80 10020
1.0 100
20
0
10
o
o
o
Ambient Temperature
oo
Voltage
3.0
10
100
8
6
4
2
50
40
30
20
10
100
1
o
80 C
o
100 C
0.05
0.10
TM
VP= 6V
RL= 100
2.6
2.2
1.4
1.8
40 8060
o
VP= 6V
0.8 1.2 1.6
o
806040
o
0.1
120-20 -40 -20 0 804020 60 100 120
Forward current IF (mA)
Minimum trigger current IFT (mA)
On-state voltage VTM(V)
Forward current IH (mA) Forward current IF (mA)
Forward voltage VF (V)
ITM= 100mA
Part No. :
MOC3063 SERIES
Page :
7
of
8
BNS-OD-C131/A4
LITE-ON TECHNOLOGY CORPORATION
Property of Lite-on Only
CHARACTERISTICS CURVES
RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD)
Unit : mm
Part No. :
MOC3063 SERIES
Page :
8
of
8
BNS-OD-C131/A4
