DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series 5%, 1%, 0.5% Sizes 0201/0402/0603/0805/1206/ 1210/1218/2010/2512 Product specification - July 10, 2017 V.7 RoHS compliant & Halogen free 2 Product specification Chip Resistor Surface Mount AC 12 0201 to 2512 SERIES SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes AC0201 to AC2512 chip resistors with leadfree terminations made by thick film process. Part number is identified by the series name, size, tolerance, packaging type, temperature coefficient, taping reel and resistance value. APPLICATIONS All general purpose applications Car electronics, industrial application FEATURES AEC-Q200 qualified Moisture sensitivity level: MSL 1 AC series soldering is compliant with J-STD-020D Halogen free epoxy RoHS compliant - Products with lead-free terminations meet RoHS requirements - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS Reduce environmentally hazardous waste High component and equipment reliability The resistors are 100% performed by automatic optical inspection prior to taping. GLOBAL PART NUMBER AC XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0201/ 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE D = 0.5% J = 5% (for Jumper ordering, use code of J) F = 1% (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE - = Base on spec (5) TAPING REEL 07 = 7 inch dia. Reel 10 = 10 inch dia. Reel 13 = 13 inch dia. Reel 7W = 7 inch dia. Reel & 2 x standard power 3W = 13 inch dia. Reel & 2 x standard power (6) RESISTANCE VALUE 1 to 22 M There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed coding rules of resistance are shown in the table of "Resistance rule of global part number". (7) DEFAULT CODE Letter L is the system default code for ordering only. (Note) Resistance rule of global part number Resistance coding Example rule XRXX (1 to 9.76) 1R = 1 1R5 = 1.5 9R76 = 9.76 XXRX (10 to 97.6) 10R = 10 97R6 = 97.6 XXXR (100 to 976) 100R = 100 976R = 976 XKXX (1 to 9.76 K) 1K = 1,000 9K76 = 9760 XMXX (1 to 9.76 M) 1M = 1,000,000 9M76= 9,760,000 XXMX (10 M) 10M = 10,000,000 O RDERING EXAMPLE The ordering code for an AC0402 chip resistor, value 100 K with 1% tolerance, supplied in 7-inch tape reel is: AC0402FR-07100KL. NOTE 1. All our R-Chip products are RoHS compliant and Halogen free. "LFP" of the internal 2D reel label states "Lead-Free Process". 2. On customized label, "LFP" or specific symbol can be printed. 3. AC series with 0.5% tolerance is also available. For further information, please contact sales. www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC SERIES 3 12 0201 to 2512 MARKING AC0201 / AC0402 No marking Fig. 1 AC0603 / AC0805 / AC1206 / AC1210 / AC2010 / AC2512 03 Fig. 2 E-24 series: 3 digits, 5% First two digits for significant figure and 3rd digit for number of zeros Value=10 K AC0603 0 Fig. 3 E-24 series: 3 digits, 1% & 0.5% One short bar under marking letter Value = 24 E-96 series: 3 digits, 1% & 0.5% First two digits for E-96 marking rule and 3rd letter for number of zeros Fig. 4 Value = 12.4 K AC0805 / AC1206 / AC1210 / AC2010 / AC2512 Both E-24 and E-96 series: 4 digits, 1% & 0.5% First three digits for significant figure and 4th digit for number of zeros Fig. 5 Value = 10 K AC1218 E-24 series: 3 digits, 5% First two digits for significant figure and 3rd digit for number of zeros Fig. 6 Value = 10 K 00 Both E-24 and E-96 series: 4 digits, 1% & 0.5% First three digits for significant figure and 4th digit for number of zeros Fig. 7 Value = 10 K NOTE For further marking information, please refer to data sheet "Chip resistors marking". Marking of AC series is the same as RC series. www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC SERIES 4 12 0201 to 2512 CONSTRUCTION The resistors are constructed on top of an automotive grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive glaze. The resistive glaze is covered by a protective glass. The composition of the glaze is adjusted to give the approximately required resistance value and laser trimming of this resistive glaze achieves the value within tolerance. The whole element is covered by a protective overcoat. Size 0603 and bigger is marked with the resistance value on top. Finally, the two external terminations (Ni / matte tin) are added, as shown in Fig.8. OUTLINES marking layer overcoat overcoat protective glass protective glass resistive layer (Jumper chip is a conductor) resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) inner electrode inner electrode termination(Ni/matte tin) inner electrode ceramic substrate YNSC088 Fig. 8_1 marking layer ceramic substrate YNSC088_1 Fig. 8_2 Chip resistor outlines AC2010/ 2512 double power chip resistor outlines DIMENSIONS Table 1 For outlines, please refer to Fig. 9 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) AC0201 0.60 0.03 0.30 0.03 0.23 0.03 0.12 0.05 0.15 0.05 AC0402 1.00 0.05 0.50 0.05 0.32 0.05 0.20 0.10 0.25 0.10 AC0603 1.60 0.10 0.80 0.10 0.45 0.10 0.25 0.15 0.25 0.15 AC0805 2.00 0.10 1.25 0.10 0.50 0.10 0.35 0.20 0.35 0.20 AC1206 3.10 0.10 1.60 0.10 0.55 0.10 0.45 0.20 0.40 0.20 AC1210 3.10 0.10 2.60 0.15 0.55 0.10 0.45 0.15 0.50 0.20 AC1218 3.10 0.10 4.60 0.10 0.55 0.10 0.45 0.20 0.40 0.20 AC2010 5.00 0.10 2.50 0.15 0.55 0.10 0.55 0.15 0.50 0.20 AC2512 6.35 0.10 3.10 0.15 0.55 0.10 0.60 0.20 0.50 0.20 For dimension, please refer to Table 1 AC0201/0402 0603/0805/1206/1210/ 2010/2512 AC1218 Side view for all type Fig. 9 Chip resistor dimensions www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC SERIES 5 12 0201 to 2512 ELECTRICAL CHARACTERISTICS Table 2 TYPE AC0201 POWER 1/20 W CHARACTERISTICS Resistance Operating Max. Max. Dielectric Range Temperature Working Overload Withstanding Range Voltage Voltage Voltage -55 C to 155 C 25V 50V 50V Temperature Coefficient Jumper Criteria 5% (E24) 1 R 10 Rated Current 1 R 10M -100/+350ppm 0.5A 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 200ppm Current 1.0A 0.5% (E24/E96) 10 R 1M Jumper<50m 1/16 W -55 C to 155 C 50V 100V 100V AC0402 5% (E24) 1 R 10 Rated Current 1 R 22M 200ppmC 1A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper<50m 10M < R 22M 2A 200ppmC 1/8W 1/10 W -55 C to 155 C -55 C to 155 C 50V 75V 100V 150V 100V 150V AC0603 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC 5% (E24) 1 R 10 Rated Current 1 R 22M 200ppmC 1A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper<50m 10M < R 22M 2A 200ppmC 1/5 W -55 C to 155 C 75V 150V 150V 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount TYPE POWER 1/8 W AC SERIES CHARACTERISTICS Resistance Operating Max. Max. Dielectric Range Temperature Working Overload Withstanding Range Voltage Voltage Voltage -55 C to 155 C 150V 300V 300V 6 12 0201 to 2512 Temperature Coefficient Jumper Criteria 5% (E24) 1 R 10 Rated Current 1 R 22 M 200ppmC 2A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper < 50m 10M < R 22M 5A AC0805 200ppmC 1/4 W 1/4 W -55 C to 155 C -55 C to 155 C 150V 200V 300V 400V 300V 500V AC1206 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC 5% (E24) 1 R 10 Rated Current 1 R 22M 200ppmC 2A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper<50m 10M < R 22M 10A 200ppmC 1/2 W 1/2 W -55 C to 155 C -55 C to 155 C 200V 200V 400V 500V 500V 500V AC1210 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC 5% (E24) 1 R 10 Rated Current 1 R 22M 200ppmC 2A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper<50m 10M < R 22M 10A 200ppmC 1W -55 C to 155 C 200V 500V 500V 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount TYPE POWER 1W AC SERIES CHARACTERISTICS Resistance Operating Max. Max. Dielectric Range Temperature Working Overload Withstanding Range Voltage Voltage Voltage -55 C to 155 C 200V 500V 500V AC1218 Temperature Coefficient 1.5W 3/4 W 155 C -55 C to 155 C 200V 200V 500V 500V 500V 500V AC2010 Jumper Criteria 5% (E24) 1 R 10 Rated Current 1 R 1M 200ppmC 6A 0.5%, 1% (E24/E96) 10 < R 1M Maximum 1 R 1M 100ppmC Current 10A Jumper<50m -55 C to 7 12 0201 to 2512 5% (E24) 1 R 10 1 R 1M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 1M 1 R 1M 100 ppmC 5% (E24) 1 R 10 Rated Current 1 R 22M 200ppmC 2A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper<50m 10M < R 22M 10A 200ppmC 1.25W 1W -55 C to 155 C -55 C to 155 C 200V 200V 500V 500V 500V 500V AC2512 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC 5% (E24) 1 R 10 Rated Current 1 R 22M 200ppmC 2A 0.5%, 1% (E24/E96) 10 < R 10M Maximum 1 R 10M 100ppmC Current Jumper<50m 10M < R 22M 10A 200ppmC 2W -55 C to 155 C 200V 400V 500V 5% (E24) 1 R 10 1 R 10M 200 ppmC 0.5%, 1% (E24/E96) 10 < R 10M 1 R 10M 100 ppmC www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC 8 12 0201 to 2512 SERIES FOOTPRINT AND SOLDERING PROFILES Recommended footprint and soldering profiles of AC -series is the same as RC-series. Please refer to data sheet "Chip resistors mounting". PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE Paper taping reel (R) Embossed taping reel (K) NOTE REEL AC0201 AC0402 AC0603 AC0805 AC1206 AC1210 AC1218 AC2010 AC2512 DIMENSION 7" (178 mm) 10,000 10,000 5,000 5,000 5,000 5,000 --- --- --- 10" (254 mm) 20,000 20,000 10,000 10,000 10,000 10,000 --- --- --- 13" (330 mm) 50,000 50,000 20,000 20,000 20,000 20,000 --- --- --- 7" (178 mm) --- --- --- --- --- --- 4,000 4,000 4,000 TEMPERATURE COEFFICIENT OF RESISTANCE RESISTANCE 1. For paper/embossed RANGE tape and reel specifications/dimensions, please refer to data sheet "Chip resistors packing". 100 m to 910 m PT040 2 200 ppm/C FUNCTIONAL DESCRIPTION OPERATING TEMPERATURE RANGE PT060 200 ppm/C 3 Range: -55 C to +155 C P OWER RATING PT080 200 ppm/C 5 Each type rated power at 70 C: 100 M TO 910 M AC0201=1/20W (0.05W) PT120 m (0.125W) AC0402=1/16W (0.0625W); 100 1/8W 6 AC0603=1/10W (0.1W); 1/5W (0.2W) PT201 AC0805=1/8W (0.125W); 1/4 W(0.25 W) 100 ppm/C 0 AC1206=1/4W (0.25W); 1/2 W (0.5 W) AC1210=1/2W (0.5W); 1W PT251 100 ppm/C AC1218=1W; 1.5W 2 AC2010=3/4W (0.75W); 1.25W AC2512=1 W; 2W R ATED VOLTAGE > 100 m 75 ppm/C 75 ppm/C Fig. 10 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= (PxR) Or Maximum working voltage whichever is less Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value () www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC SERIES 9 12 0201 to 2512 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS High Temperature Exposure AEC-Q200 Test 3 1,000 hours at TA = 155 C, unpowered (1.0%+0.05) for D/F tol MIL-STD-202 Method 108 (2.0%+0.05) for J tol <50 m for Jumper Moisture Resistance Biased Humidity Operational Life AEC-Q200 Test 6 MIL-STD-202 Method 106 AEC-Q200 Test 7 MIL-STD-202 Method 103 AEC-Q200 Test 8 MIL-STD-202 Method 108 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d. with 25 C / 65 C 95% R.H, without steps 7a & 7b, unpowered (0.5%+0.05) for D/F tol 1,000 hours; 85 C / 85% RH 10% of operating power (1.0%+0.05) for D/F tol Measurement at 24 4 hours after test conclusion. <100 m for Jumper 1,000 hours at 125 C, derated voltage applied for 1.5 hours on, 0.5 hour off, still-air required (1.0%+0.05) for D/F tol (2.0%+0.05) for J tol <100 m for Jumper (3.0%+0.05) for J tol (3.0%+0.05) for J tol <100 m for Jumper Resistance to Soldering Heat Thermal Shock ESD AEC-Q200 Test 15 Condition B, no pre-heat of samples (0.5%+0.05) for D/F tol MIL-STD-202 Method 210 Lead-free solder, 260 5 C, 10 1 seconds immersion time (1.0%+0.05) for J tol Procedure 2 for SMD: devices fluxed and cleaned with isopropanol No visible damage AEC-Q200 Test 16 -55/+125 C (0.5%+0.05) for D/F tol MIL-STD-202 Method 107 Number of cycles is 300. Devices mounted (1.0%+0.05) for J tol Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air - Air <50 m for Jumper AEC-Q200 Test 17 Human Body Model, (3.0%+0.05 ) AEC-Q200-002 1 pos. + 1 neg. discharges <50 m for Jumper <50 m for Jumper 0201: 500V 0402/0603: 1KV 0805 and above: 2KV www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount TEST Solderability - Wetting AC SERIES TEST METHOD PROCEDURE AEC-Q200 Test 18 Electrical Test not required Magnification 50X J-STD-002 SMD conditions: (a) Method B, aging 4 hours at 155 C dry heat, dipping at 235 3 C for 5 0.5 seconds. 10 12 0201 to 2512 REQUIREMENTS Well tinned (95% covered) No visible damage (b) Method B, steam aging 8 hours, dipping at 215 3 C for 5 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260 3 C for 7 0.5 seconds. Board Flex AEC-Q200 Test 21 AEC-Q200-005 Chips mounted on a 90mm glass epoxy resin PCB (FR4) (1.0%+0.05) <50 m for Jumper Bending for 0201/0402: 5 mm 0603/0805: 3 mm 1206 and above: 2 mm Holding time: minimum 60 seconds Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/-55 C and +25/+125 C Refer to table 2 Formula: R2-R1 T.C.R= ------------------------- x 106 (ppm/C) R1(t2-t1) Where t1=+25 C or specified room temperature t2=-55 C or +125 C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Short Time Overload FOS IEC60115-1 4.13 ASTM-B-809-95 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature (1.0%+0.05) for D/F tol Sulfur (saturated vapor) 500 hours, 60 2, ( 1.0%+0.05) (2.0%+0.05) for J tol <50 m for Jumper unpowered www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC SERIES 11 12 0201 to 2512 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 7 July 10, 2017 - - Add "3W" part number coding for 13" Reel & double power Version 6 May 31, 2017 - - Add 10" packing Version 5 Dec. 07, 2015 - - Add in AC double power Version 4 May 25, 2015 - - Remove 7D packing - Extend resistance range - Add in AC0201 - Update FOS test and requirements Version 3 Feb 13, 2014 - - Feature description updated - add 0.5% - delete 10" taping reel Version 2 Feb. 10, 2012 - - Jumper criteria added - AC1218 marking and outline figure updated Version 1 Feb. 01, 2011 - - Case size 1210, 1218, 2010, 2512 extended - Test method and procedure updated - Packing style of 7D added Version 0 Nov. 10, 2010 - - First issue of this specification www.yageo.com Jul. 10, 2017 V.7 Product specification Chip Resistor Surface Mount AC SERIES 0201 to 2512 12 12 LEGAL DISCLAIMER Yageo, its distributors and agents (collectively, "Yageo"), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or improvements to product related information at any time and without notice. Yageo makes no representation, warranty, and/or guarantee about the fitness of its products f or any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability. Yageo statements regarding the suitability of products for certain types of applications are based on Yageo's knowledge of typical operating conditions for such types of applications in a generic nature. Such statements are neither binding statements of Yageo n or intended to constitute any warranty concerning the suitability for a specific customer application or use. They are intended for use only by customers with requisite knowledge and experience for determining whether Yageo products are the correct product s for their application or use. In addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or use of Yageo products which requires higher degree of reliability or safety, shall employ additional prote ctive safeguard measures to ensure that product failure would not result in personal injury or property damage. Yageo products are not designed for application or use in medical, life -saving, or life-sustaining devices or for any other application or use in which the failure of Yageo products could result in personal injury or death. Customers using or selling Yageo products not expressly indicated for above -mentioned purposes shall do so at their own risk and agree to fully indemnify Yageo and hold Yageo harmless. Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN. www.yageo.com Jul. 10, 2017 V.7