RS, NS www.vishay.com Vishay Dale Wirewound Resistors, Industrial, Precision Power, Silicone Coated, Axial Lead FEATURES * * * * High temperature coating (> 350 C) Complete welded construction Meets applicable requirements of MIL-PRF-26 Available in non-inductive styles (type NS) with Aryton-Perry winding for lowest reactive components * Excellent stability in operation (typical resistance shift < 0.5 %) * MIL-PRF-26 qualified, type RW resistors can be found at: www.vishay.com/doc?30281 * Compliant to RoHS Directive 2002/95/EC Notes * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HIST. MODEL POWER RATING (1) P25 C W U 0.05 % to 5 % 0.4 0.75 1.0 1.0 1.0 4.0 3.0 3.0 3.0 2.5 2.5 5.0 5.0 7.0 10.0 10.0 - POWER RATING (1) P25 C W V3% to 10 % 5.5 3.75 3.25 3.25 3.25 6.5 6.5 9.0 13.0 13.0 RESISTANCE RANGE RESISTANCE RANGE RESISTANCE RANGE 0.05 % 0.1 % 0.25 % RESISTANCE RESISTANCE RANGE RANGE 0.5 %, 3 %, 5 %, 1% 10 % 0.1 to 3.4K 0.1 to 3.4K 0.1 to 4.9K 0.1 to 4.9K 0.1 to 10.4K 0.1 to 10.4K 0.1 to 10.4K 0.1 to 10.4K 0.1 to 6.85K 0.1 to 6.85K 0.1 to 47.1K 0.1 to 47.1K 0.1 to 18.74K 0.1 to 18.74K 0.1 to 24.5K 0.1 to 24.5K 0.1 to 24.5K 0.1 to 24.5K 0.1 to 32.3K 0.1 to 32.3K 0.1 to 32.3K 0.1 to 32.3K 0.1 to 32.3K 0.1 to 95.2K 0.1 to 95.2K 0.1 to 95.2K 0.1 to 95.2K 0.1 to 95.2K 0.1 to 154K 0.1 to 154K 0.1 to 273K 0.1 to 273K 0.1 to 273K 0.1 to 273K 0.1 to 273K WEIGHT (typical) g RS1/4 RS-1/4 1 to 1K 0.499 to 1K 0.499 to 3.4K 0.21 RS1/2 RS-1/2 1 to 1.3K 0.499 to 1.3K 0.499 to 4.9K 0.23 RS01A RS-1A 1 to 2.74K 0.499 to 2.74K 0.499 to 10.4K 0.34 RS01A...300 RS-1A-300 0.499 to 2.74K 0.499 to 10.4K 0.34 0.499 to 1.67K 0.499 to 6.85K 0.30 RS01M RS-1M 1 to 1.32K 0.499 to 12.7K 0.499 to 12.7K 0.1 to 47.1K 2.10 RS002 RS-2 0.499 to 4.49K 0.499 to 4.49K 0.1 to 18.74K 0.65 RS02M RS-2M RS02B RS-2B 0.499 to 6.5K 0.499 to 6.5K 0.1 to 24.5K 0.70 RS02B...300 RS-2B-300 0.499 to 6.5K 0.1 to 24.5K 0.70 RS02C RS-2C 0.499 to 8.6K 0.499 to 8.6K 0.1 to 32.3K 1.6 0.499 to 8.6K 0.499 to 8.6K 0.1 to 32.3K 1.6 RS02C...17 RS-2C-17 1.6 RS02C...23 RS-2C-23 RS005 RS-5 0.499 to 25.7K 0.499 to 25.7K 0.1 to 95.2K 4.2 0.499 to 25.7K 0.1 to 95.2K 4.2 RS005...69 RS-5-69 RS005...70 RS-5-70 4.2 0.499 to 41.4K 0.499 to 41.4K 0.1 to 154K 4.7 RS007 RS-7 RS010 RS-10 0.499 to 73.4K 0.499 to 73.4K 0.1 to 273K 9.0 0.499 to 73.4K 0.1 to 273K 9.0 RS010...38 RS-10-38 9.0 RS010...39 RS-10-39 Notes * Models not available as lead (Pb)-free: RS01A...300, RS02B...300, RS02C...23, RS005...69, RS005...70, RS010...38, RS010...39 * Shaded area indicates most popular models (1) Vishay Dale RS models have two power ratings depending on operation temperature and stability requirements. Models not available for characteristic V are: RS1/4, RS1/2, RS01A, RS01A...300, RS01M, RS02M, RS02B...300, RS005...69, and RS010...38 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RS02C10K00FS7017 R S 0 2 C 1 0 K 0 0 F S 7 0 1 7 GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING SPECIAL (See Standard Electrical Specifications Global Model column for options) R = Decimal K = Thousand 15R00 = 15 10K00 = 10 k A = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1.0 % J = 5.0 % K = 10.0 % E70 = Lead (Pb)-free, tape/reel (smaller than RS005) E73 = Lead (Pb)-free, tape/reel (RS005 and larger) E12 = Lead (Pb)-free, bulk (Dash Number) (up to 3 digits) From 1 to 999 as applicable S70 = Tin/lead, tape/reel (smaller than RS005) S73 = Tin/lead, tape/reel (RS005 and larger) B12 = Tin/lead, bulk Historical Part Numbering example: RS-2C-17 10 k 1 % S70 RS-2C-17 10 k 1% S70 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING Revision: 09-Jan-12 Document Number: 30204 1 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RS, NS www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] D B C Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown MATERIAL SPECIFICATIONS Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic, steatite or alumina, depending on physical size Coating: Special high temperature silicone Standard Terminals: 100 % Sn, or 60/40 Sn/Pb coated Copperweld(R) End Caps: Stainless steel Part Marking: DALE, model, wattage (2), value, tolerance, date code Note (2) Wattage marked on part will be "U" characteristic DERATING RATED POWER IN % DIMENSIONS in inches [millimeters] B (3) A C D (max.) 0.250 0.031 0.281 0.085 0.020 0.020 0.002 RS1/4 [6.35 0.787] [7.14] [2.16 0.508] [0.508 0.051] 0.312 0.016 0.328 0.078 + 0.016 0.031 0.020 0.002 RS1/2 [7.92 0.406] [8.33] [1.98 + 0.406 - 0.787] [0.508 0.051] RS01A 0.406 0.031 0.437 0.094 0.031 0.020 0.002 RS01A...300 [10.31 0.787] [11.10] [2.39 0.787] [0.508 0.051] 0.285 0.025 0.311 0.110 0.015 0.020 0.002 RS01M [7.24 0.635] [7.90] [2.79 0.381] [0.508 0.051] 0.625 0.062 0.765 0.250 0.031 0.040 0.002 RS002 [15.88 1.57] [19.43] [6.35 0.787] [1.02 0.051] 0.500 0.062 0.562 0.185 0.015 0.032 0.002 RS02M [12.70 1.57] [14.27] [4.70 0.381] [0.813 0.051] RS02B 0.560 0.062 0.622 0.187 0.031 0.032 0.002 RS02B...300 [14.22 1.57] [15.80] [4.75 0.787] [0.813 0.051] 0.500 0.062 0.593 0.218 0.031 0.040 0.002 RS02C [12.70 1.57] [15.06] [5.54 0.787] [1.02 0.051] RS02C...17 0.500 0.062 0.593 0.218 0.031 0.032 0.002 RS02C...23 [12.70 1.57] [15.06] [5.54 0.787] [0.813 0.051] RS005 0.875 0.062 1.0 0.312 0.031 0.040 0.002 RS005...69 [22.23 1.57] [25.4] [7.92 0.787] [1.02 0.051] RS005...70 1.22 0.062 1.28 0.312 0.031 0.040 0.002 RS007 [30.99 1.57] [32.51] [7.92 0.787] [1.02 0.051] RS010 1.78 0.062 1.87 0.375 0.031 0.040 0.002 RS010...39 [45.21 1.57] [47.50] [9.53 0.787] [1.02 0.051] 1.78 0.062 1.84 0.375 0.031 0.040 0.002 RS010...38 [45.21 1.57] [46.74] [9.53 0.787] [1.02 0.051] Note (3) B (max.) dimension is clean lead to clean lead GLOBAL MODEL 1.50 [38.10] (1) min. A 120 100 80 NS NON-INDUCTIVE 60 CHAR. V 40 20 0 - 65 - 50 CHAR. U 0 50 150 250 350 AMBIENT TEMPERATURE IN C 25 Models of equivalent physical and electrical specifications are available with non-inductive (Aryton-Perry) winding. They are identified by substituting the letter N for R in the model number (NS005, for example). Two conditions apply: 1. For NS models, divide maximum resistance values by two 2. Body O.D. on NS02C may exceed that of the RS02C by 0.010" TECHNICAL SPECIFICATIONS PARAMETER Temperature Coefficient Maximum Working Voltage Insulation Resistance Operating Temperature Range UNIT ppm/C V C RS RESISTOR CHARACTERISTICS 20 for 10 and above, 50 for 1 to 9.9 , 90 for 0.5 to 0.99 (P x R)1/2 1000 M minimum dry, 100 M minimum after moisture test Characterisitic U = - 65 to + 250, characteristic V = - 65 to + 350 PERFORMANCE TEST Thermal Shock Short Time Overload Dielectric Withstanding Voltage Low Temperature Storage High Temperature Exposure Moisture Resistance Shock, Specified Pulse Vibration, High Frequency Load Life Terminal Strength Revision: 09-Jan-12 Rated power applied until thermally stable, then a minimum of 15 min at - 55 C 5 x rated power (3.75 W and smaller), 10 x rated power (4 W and larger) for 5 s TEST LIMITS CHARACTERISTIC U CHARACTERISTIC V (0.2 % + 0.05 ) R (2.0 % + 0.05 ) R (0.2 % + 0.05 ) R (2.0 % + 0.05 ) R 500 VRMS min. for RS1/4 thru RS01A, 1000 VRMS for all others, duration of 1 min (0.1 % + 0.05 ) R (0.1 % + 0.05 ) R - 65 C for 24 h 250 h at: U = + 250 C, V = + 350 C MIL-STD-202 Method 106, 7b not applicable MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each 2000 h at rated power, + 25 C, 1.5 h "ON", 0.5 h "OFF" Pull test 5 s to 10 s, 5 lb (RS1/4 thru RS01A), 10 lb for all others; torsion test - 3 alternating directions, 360 each (0.2 % + 0.05 ) R (0.5 % + 0.05 ) R (0.2 % + 0.05 ) R (0.1 % + 0.05 ) R (0.1 % + 0.05 ) R (0.5 % + 0.05 ) R CONDITIONS OF TEST (2.0 % + 0.05 ) R (2.0 % + 0.05 ) R (2.0 % + 0.05 ) R (0.2 % + 0.05 ) R (0.2 % + 0.05 ) R (3.0 % + 0.05 ) R (0.1 % + 0.05 ) R (1.0 % + 0.05 ) R Document Number: 30204 2 For technical questions, contact: ww2bresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1