EN Zone fur durchkontaktierte Locher 0,6 0,05 2 10 x 2 = 20 8 25 15 2 compliant zone for thru hole 0,6 0,05 10 x 2 = 20 11 4x2=8 11,30,1 Ebene 3 - Level 3 1 9,8 0,1 Ebene 2 - Level 2 a b c 13,45 -0,1 3 -0,1 15,4 8,3 0,1 Ebene 1 - Level 1 d e 4,5 0,3 3,7 0,3 A 1 max. P2 1 max. B C D 50 max. P1 E F K L R3 M N Bestuckungsplan / contact layout 25 24 23 22 21 20 19 18 17 16 15 B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B 11 10 9 B B B B B B B B B B B B B B B B B B B B 8 B B B B B 7 B B B B B 6 5 B B B B B B B B B B 4 3 B B B B B B B B B B 2 B B B B B R2 P R1 Q R S 1 B B B B B T U a b c d e P3 V P4 W X Y Z 1,8 0,1 2,1 0,1 13 0,2 14,5 0,2 16 0,2 5,3 0,1 6,80,1 8,3 0,1 board hole pattern (component mounting side) Lochbild fur Leiterplatte (Bestuckungsseite) Bezugsebene Tiefe Datum plane depth alle Locher/ all holes 10 x 2 = (20) 0,05 10 x 2 = (20) 8 1) 2 1) 0,6 0,05 Durchmesser des metallisierten Loches 0,6 0,05 Diameter of finished plated-through hole Schichtaufbau im metallisierten Loch siehe Zeichnung 164062 Nr.1 Metal plating of plated-through hole see drawing 164062 No.1 4 x 2 = (8) a 25 15 P2 Level 2 siehe Bestuckungsplan / see contact layout Anforderungsstufe 2 / class 2 ohne Fixierstift / without locating peg 11 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 2 b c Fehlende Mae und Angaben nach IEC 61076-4-101 d e Missing information and dimensions per IEC 61076-4-101 1 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. ERmet Messerleiste A ERmet Male Wide Type A 044148 www.ERNI.com g 14.03.2018 Index Date Class ERMA I A3