© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2059_T550 • 3/13/2017 66
Tantalum Through-Hole Capacitors – Hermetically Sealed
T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series
Dimensions – Inches (Millimeters)
SIDE VIEW END VIEW
L
M
1.50±0.250
(38.10±6.35)
D
+
J
0.094 (2.39) Maximum
Case Code Case Size Uninsulated Case
MIL–PRF–39006 L
±0.031 (0.79)
D
+0.016 (0.41)
−0.015(0.38)
M
±0.002 (0.05)
J
max
+0.016 (0.41)
−0.015(0.38)
L
± 0.031 (0.79)
Table 1 – Ratings & Part Number Reference
Rated
V o l t a g e
Rated
Capacitance
Case
Size
KEMET Part
Number
DLA
Drawing Number
DC
Leakage DF Maximum
ESR
Ripple
Current
(V) 85ºC µF KEMET/EIA (See below for part options) (See below for part options) µA at 25°C
Maximum/5 Minutes
% at 25ºC
120 Hz Max
mΩ at 25ºC
100 kHz
mArms at
85ºC/40 kHz
6140 BT550B147(1)006A(3) N/A 6.3 5.0 120 1510
6820 BT550B827(1)006A(3) N/A 36.9 5.0 90 1750
8220 BT550B227(1)008A(3) N/A 13.2 5.0 120 1510
8680 BT550B687(1)008A(3) N/A 40.8 5.0 90 1750
10 100 BT550B107(1)010A(3) N/A 7.5 5.0 140 1400
10 180 BT550B187(1)010A(3) N/A 13.5 5.0 110 1580
10 560 BT550B567(1)010A(3) N/A 42.0 5.0 90 1750
15 70 BT550B706(1)015A(3) N/A 7.9 5.0 140 1400
15 120 BT550B127(1)015A(3) N/A 13.5 5.0 110 1580
15 390 BT550B397(1)015A(3) N/A 43.9 5.0 90 1750
25 50 BT550B506(1)025A(3) N/A 9.4 5.0 170 1275
25 100 BT550B107(1)025(2)(3) 13030-01(1)(4)(5)L(6) 18.8 5.0 190 1200
30 40 BT550B406(1)030A(3) N/A 9.0 5.0 170 1275
30 68 BT550B686(1)030A(3) N/A 15.3 5.0 140 1400
35 330 BT550B337(1)035A(3) N/A 86.6 10.0 180 1240
40 100 BT550B107(1)040(2)(3) 13030-02(1)(4)(5)L(6) 30.0 5.0 150 1350
40 120 BT550B127(1)040(2)(3) 13030-03(1)(4)(5)L(6) 36.0 5.0 120 1510
50 25 BT550B256(1)050A(3) N/A 9.4 5.0 170 1275
50 47 BT550B476(1)050A(3) N/A 17.6 5.0 150 1350
50 100 BT550B107(1)050(2)(3) 13030-04(1)(4)(5)L(6) 37.5 5.0 130 1450
50 120 BT550B127(1)050(2)(3) 13030-05(1)(4)(5)L(6) 45.0 5.0 90 1750
60 20 BT550B206(1)060A(3) N/A 9.0 5.0 200 1175
60 39 BT550B396(1)060A(3) N/A 17.6 5.0 160 1310
60 100 BT550B107(1)060(2)(3) 13030-06(1)(4)(5)L(6) 45.0 5.0 100 1660
75 75 BT550B756(1)075(2)(3) 13030-07(1)(4)(5)L(6) 42.2 5.0 110 1580
100 25 BT550B256(1)100(2)(3) 13030-08(1)(4)(5)L(6) 18.8 5.0 190 1200
(1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance.
(2) To complete KEMET part number, insert A = N/A, B= standard reliability, or T = high reliability.
(3) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates termination
nish.
(4) To complete the DLA PIN number, insert the surge current testing option, A = 25°C after voltage aging, B = −55°C +0°C and +85°C after voltage aging
or C = −55°C +0°C and +85°C before voltage aging
(5) To complete the DLA PIN number, insert the insulation option. S = Sleeved, U = Unseleeved.
(6) To complete the DLA PIN number, insert the product level option. B = standard reliability or T = high reliability.
Refer to Ordering Information for additional detail.
Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will
be marked with the higher voltage rating.