3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ HSHM Press-Fit Power Socket
2 mm Type D, 176 Signal/4 Power Contacts, 8 Rows, Right Angle HSHM Series
• Up to 5 Gb/s data rates
• Low crosstalk at high frequencies
• 50/100 Ω (single-ended /differential) impedance
• Modular/scalable format IEC 61076-4-101
• 101 mated lines per linear inch
• Dual beam contact construction for high reliability
• Four integrated 8.25 A power blades
• End-to-end stackable with 8 row 3M™ MetPak™ HM
and HSHM sockets
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3mconnector.com for compliance information
Date Modifi ed: November 16, 2010 TS-2001-B
Sheet 1 of 3
Physical
Insulation:
Material: High Temperature Thermoplastic (LCP)
Flammability: UL 94V-0
Color:
Material: Copper Alloy
Plating: See Ordering information
Performance
Mechanical:
Normal Force (Nominal): 0.57 N [58 g] Signal, 0.74 N [ 75 g ] Shield, 0.98 N [ 100 g ] Power
Engagement Force (Nominal): 0.32 N [33 g] Signal, 0.22 N [ 22 g ] Shield, 1.42 N [ 145 g ] Power
Separation Force (Nominal): 0.20 N [20 g] Signal, 0.20 N [ 20 g ] Shield, 0.89 N [ 91 g ] Power
Wipe (Nominal, Shortest Contact): 2.67 mm [0.105 in] Signal, 1.57 mm [ 0.062 in ] Shield, 1.93 N [ 0.076 in. ] Power
Mate/Unmate Cycles: 250
Application: This module is suitable for stand-alone use. (Refer to IEC-61076-4-101)
Electrical:
Data Rate: 5 Gb/s
Characteristic Impedance: 50 Ω Single-ended, 100 Ω Differential
Current Rating (Fully Loaded): 1 A @ 70° C Signal, 8.25 A at 70×C Power
Insulation Resistance: 104 MΩ @ 100 VDC
Withstanding Voltage: 750 Vrms
Environmental
Temperature Rating: -55° C to 125° C
UL File No.: E68080 MetPak is a trademark of 3M Company.
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ HSHM Press-Fit Power Socket
2 mm Type D, 176 Signal/4 Power Contacts, 8 Rows, Right Angle HSHM Series
TS-2001-B
Sheet 2 of 3
Ordering Information
HSHM-S176DPWRX - 8AP1 - XXXXX
I
H
G
F
E
D
C
B
A
25 24 23 22 21 20 19 18 17 16 15 11 10 9 8 7 6 5 4 3 2 1
Z
2.00
.079
48.00
1.890
2.00
.079
17.40
.685
2.00
.079 46.00
1.811 2.00
.079
22.40
.882
16.95
.667
P4 P3
P2 P1
50.00
1.969
8.80
.346
10.70
.421
0.75
.030 3.30
.130
2.80
.110
Plating μm [ μ” ]:
TG30 = 0.76 [30] Min. Au Contact Area
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Standard Option
TG30L = 0.76 [30] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Typically higher make order quantities as compared to TG30.
TG50 = 1.27 [50] Min. Au Contact Area, Lubricated
2.54 [100] Min. SnPb Terminal Area (RIA C2 & E2 apply)
1.27 [50] Min. Ni All over
Non-Standard Option (Available with longer lead times and higher
make order quantities, MOQ)
mm
(Inch)
Tolerance Unless Noted
0 0.0 0.00
mm ±3 ±0.3 ±0.13
[ ] Dimensions for
Reference Only
Standard configuration (power blade mate length)
P1 and P2 = 5.0 mm
P3 and P4 = 6.50 mm
For non-standard configurations contact sales representative
High Speed Option:
1 =Row differential applications
4 =Coaxial and column differential applications
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ HSHM Press-Fit Power Socket
2 mm Type D, 176 Signal/4 Power Contacts, 8 Rows, Right Angle HSHM Series
TS-2001-B
Sheet 3 of 3
A
1
-A-
-C-
B
C
D
E
F
G
H
I, Z
2345678910111516171819202122232425
A
1
B
C
D
E
F
G
H
I, Z
2345678910111516171819202122232425
48.00
2.00
DIM F 14X
SEE TABLE
2.00
1.00
0.75
1.50
2.00
2.00
1.50
7.50
13.50
22.50
23.00
23.50
DIM E 316X
SEE TABLE
Recommended PCB hole mounting pattern for coaxial,
column differential, and stripline applications
Recommended PCB hole mounting pattern for row
differential applications
(Same geometry as above without the ground vias)
0.10 A B C
0.10 A B C -B-
Ø
Ø
Ø
Ø
M
M
Hole Plating Table
Hole Finished Hole Dia. “D” Cu. Thickness SnPb Thickness Drilled Hole Dia.
“E” 0.457 - 0.559 [.0180 - .0220] 0.025 - 0.045 [.0010 - .0018] 0.008 -0.018 [.0003 - .0007] 0.584 - 0.625 [.0230 - .0246]
“F” 0.690 - 0.790 [.0270 - .0310] 0.025 - 0.045 [.0010 - .0018] 0.008 - 0.018 [.0003 - .0007] 0.810 - 0.860 [.0320 - .0340]
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.
