16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Specification Small Form Factor Pluggable Duplex LC Receptacle - SFP+ 16GFC Optical Transceiver Ordering Information TAS-A1LH1-911 Model Name Voltage Category Device type Interface LOS Temperature Distance Latch Color TAS-A1LH1-911 3.3V With DDMI 850 nm VCSEL AC / AC Coupling LVTTL 0C ~+70C 35m / 100m (OM2/OM3) Black Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 1 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Features Up to 14.025 Gb/s bi-directional data links, the serial line rate of 16G FC Automatic rate detect 850nm Vertical Cavity Surface Emitting Laser (VCSEL) Duplex LC connector optical interface Hot-pluggable SFP All-metal housing for superior EMI performance Built in digital diagnostic functions Operating case temperature range: 0 ~ 70 RoHS Compliant Single 3.3V power supply Application Tri-Rate 4G/8G/16G Fiber Channel 10GBASE-SR Ethernet Transceiver Block Diagram Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 2 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Pin Definition and Descriptions Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 3 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 PIN 1 2 Logic LVTTL-O Symbol VeeT TX_Fault 3 LVTTL-I TX_Dis 4 5 LVTTL-I/O LVTTL-I SDA SCL 6 Mod_ABS Name / Description Module Transmitter Ground Module Transmitter Fault Transmitter Disable; Turns off transmitter laser output 2-Wire Serial Interface Data Line 2-Wire Serial Interface Clock Module Absent, connected to VeeT or VeeR in the module 7 LVTTL-I RS0 Rate Select 0, optionally controls SFP+ module receiver. When high input signaling rate> 4.25 GBd and when low input signal rate 4.25 GBd. 8 LVTTL-O RX_LOS Receiver Loss of Signal Indication RS1 Rate Select 1, optionally controls SFP+ module transmitter. When high input signaling rate> 4.25 GBd and when low input signal rate 4.25 GBd. VeeR VeeR RDRD+ VeeR VccR VccT VeeT TD+ TDVeeT Module Receiver Ground Module Receiver Ground Receiver Inverted Data Output Receiver Data Output Module Receiver Ground Module Receiver 3.3 V Supply Module Transmitter 3.3 V Supply Module Transmitter Ground Transmitter Non-Inverted Data Input Transmitter Inverted Data Input Module Transmitter Ground 9 10 11 12 13 14 15 16 17 18 19 20 LVTTL-I CML-O CML-O CML-I CML-I Note 1 2 3 2 2 1 1 1 1 1 Note: 1. Module ground pins are isolated from the module case and chassis ground within the module. 2. Shall be pulled up with 4.7k to 10k ohm to a voltage between 3.15V and 3.45V on the host board. 3. Shall be pulled up with 4.7k to 10k ohm to VccT in the module. Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 4 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Absolute Maximum Ratings Parameters Symbol Min. Max. Unit Power Supply Voltage VCC -0.5 4 V Storage Temperature Relative Humidity Ts RH -40 0 85 85 C % Recommended Operating Environment Parameters Symbol Min. Typical Max Unit Power Supply Voltage VCC 3.15 3.3 3.46 V Operating Case Temperature Top 0 25 70 C Supply Current ICC 290 mA Date Rate BR 14.025 Gb/s Bit Error Rate BER 4.25 10-12 Notes 1 Notes: 1. PRBS 27-1 for 8GFC. PRBS 231-1 for 16GFC. Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 5 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Optical Characteristics The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified. (Vcc = 3.15 to 3.45 Volts) Parameter Transmitter Center Wavelength RMS spectral width Average Optical Power(OM2/OM3) Optical Modulation Amplitude 14.025Gb/s Extinction Ratio Optical Modulation Amplitude 10.3125Gb/s Optical Modulation Amplitude 8.5Gb/s Optical Modulation Amplitude 4.25Gb/s Relative Intensity Noise Vertical Eye Closure Penalty 14.025 Gb/s Receiver Average Receiver Power Unstressed Receiver OMA Sensitivity 14.025Gb/s Unstressed Receiver OMA Sensitivity 10.3125Gb/s Unstressed Receiver OMA Sensitivity 8.5Gb/s Unstressed Receiver OMA Sensitivity 4.25Gb/s Optical Return Loss LOS Assert LOS De-Assert LOS Hysteresis Symbol Min. Typical Max Unit 840 860 0.59 nm nm Pout -7.8 dBm OMA -4.8 dBm ER 4 dB OMA -5.0 dBm OMA -5.2 dBm OMA -6.1 dBm Notes 1 RIN -128 dB/Hz CEVPQ 2.56 dB RxMAX 0 dBm RxSENS -10.5 dBm 2 RxSENS -7.5 dBm 2 RxSENS -11.2 dBm 2 RxSENS -12.1 dBm 2 LOSA LOSD LOSH 12 -30 -13 0.5 dB dBm dBm dB Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 6 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Notes: 1. Class 1 Laser safety limits CDRH and EN60825 standards. 2. Unstressed Rx sensitivity Electrical Characteristics The following electrical characteristics are defined over the Recommended Operating Environment unless otherwise specified. (Vcc = 3.15 to 3.45 Volts) Parameter Transmitter Input differential impedance Single-ended data input swing Symbol Min. Rin Typical Max 100 Unit Vin,pp 90 800 mV Transmit Disable Voltage VD 2 Vcc V Transmit Enable Voltage VEN Vee Vee+0.8 V Vout,pp 185 425 mV LOS Fault VLOS fault 2 VccHOST V LOS Normal VLOS norm Vee Vee+0.8 V PSR 100 Receiver Single ended data output swing Power Supply Rejection Receiver Deterministic Jitter (14.025Gb/s) Receiver Deterministic Jitter (8.5Gb/s) Notes mVpp DJ 0.22 UI DJ 0.42 UI Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 7 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Digital Diagnostic Functions The following digital diagnostic characteristics are defined over the Recommended Operating Environment unless otherwise specified. It is compliant to SFF8472 Rev10.2 with internal calibration mode. For external calibration mode please contact our sales stuff. Parameter Symbol Min. Max Accuracy Unit DMI_Temp 0 70 5 3.15 3.45 3% V 0 20 10% mA Transmitter Output Power Accuracy DMI_Tx power -8 -1 3 dB dBm Receiver Optical Input Power Accuracy -12 0 3 dB dBm Transceiver Temperature Accuracy Transceiver Supply Voltage Accuracy DMI_Voltage Transmitter Bias Current DMI_Bias DMI_Rx power Notes Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 8 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Control and Status I/O Timing Characteristics Timing characteristics of control and status I/O are included in Table 9, which is also defined in SFF-8431. Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 9 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 Mechanical (mm) Reference "Fibre Channel - Physical Interfaces - 5", INCITS 479-2011 (Defines 4GFC, 8GFC, and 16GFC) IEEE STD 802.3ae, Clause 52, PMD Type 10GBASE-SR. IEEE Standards Department. "Improved Pluggable Form Factor,"SFF Document Number SFF-8432, Revision 5.0, July 16, 2007. "Enhanced Small Form Factor Pluggable Module `SFP+',"SFF Document Number SFF8431, Revision 4.1, July 6, 2009; Addendum Jun 21, 2013. SFF-8402, Revision 0.2 Small Form Factor Pluggable (SFP) Transceiver Multi-Source Agreement (MSA), September 14, 2000 which is available as SFF Document Number INF-8074, Revision 1.0 May 12, 2001. "Digital Monitoring Interface for Optical Transceivers,"SFF Document Number SFF-8472, Revision 12.1. Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 10 16GFC SFP+ Transceiver 4G/8G/10G/16G PRODUCT NUMBER: TAS-A1LH1-911 ESD Normal ESD precautions are required during the handling of this module. This transceiver is shipped in ESD protective packaging. It should be removed from the packaging and handled only in an ESD protected environment. Contact Information Formerica OptoElectronics Inc. 5F-11, No.38, Taiyuan St., Zhubei City, Hsinchu County 30265, Taiwan Tel: +886-3-5600286 Fax: +886-3-5600239 San Diego, CA Tel: 1-949-466-8069 inquiry@formericaoe.com www.formericaoe.com Formerica OptoElectronics Inc. MAR-02-2019 Rev.1.3 Page 11