UNISONIC TECHNOLOGIES CO., LTD BCP68 NPN SILICON TRANSISTOR NPN MEDIUM POWER TRANSISTOR FEATURES * High current (max. 1 A) * Low voltage (max. 20 V). * Complementary to UTC BCP69 1 SOT-223 APPLICATIONS * General purpose switching and amplification under high current conditions. Lead-free: BCP68L Halogen-free: BCP68G ORDERING INFORMATION Normal BCP68-xx-AA3-R Ordering Number Lead Free Plating BCP68L-xx-AA3-R Halogen Free BCP68G-xx-AA3-R www.unisonic.com.tw Copyright (c) 2009 Unisonic Technologies Co., Ltd Package SOT-223 Pin Assignment 1 2 3 B C E Packing Tape Reel 1 of 3 QW-R207-008,D BCP68 NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25C , unless otherwise specified) PARAMETER Collector-Base Voltage (Open Emitter) Collector-Emitter Voltage (Open Base) Emitter-Base Voltage (Open Collector) SYMBOL RATINGS UNIT VCBO 32 V VCEO 20 V VEBO 5 V DC IC 1 A Collector Current 2 A Peak ICM Peak Base Current IBM 200 mA Total Power Dissipation (Ta 25) PD 1.35 W Junction Temperature TJ 150 Operating Temperature TOPR -45 ~ +150 Storage Temperature TSTG -65 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Thermal Resistance From Junction To Ambient RATINGS 91 UNIT /W ELECTRICAL CHARACTERISTICS (TJ = 25, unless otherwise specified.) PARAMETER Collector-Emitter Saturation Voltage Base-Emitter Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector Capacitance Transition Frequency DC Current Gain Ratio of the Complementary Pairs SYMBOL JA SYMBOL TEST CONDITIONS VCE(SAT) IC = 1A, IB =100mA IC = 5mA, VCE = 10V VBE IC = 1A, VCE = 1V IE = 0, VCB = 25V ICBO IE = 0, VCB = 25V, TJ = 150 IEBO IC = 0, VEB = 5V IC = 5mA, VCE = 10V hFE IC = 500mA, VCE = 1V IC = 1A, VCE = 1V CC IE = ie = 0, VCB = 5V, f = 1MHz fT IC = -10mA, VCE = -5V, f = 100MHz hFE1 |IC| = 0.5A, |VCE| = 1V hFE2 MIN TYP MAX UNIT 500 mV 620 mV 1 V 100 nA 10 A 100 nA 50 85 60 375 48 pF MHz 40 1.6 CLASSIFICATION OF hFE RANK RANGE 16 100~250 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 25 160~375 2 of 3 QW-R207-008,D BCP68 NPN SILICON TRANSISTOR TYPICAL CHARACTERISTIC DC Current Gain (Typical Values) 300 VCE = 1V 250 hFE 200 150 100 50 0 -10-1 1 10 102 103 104 IC (mA) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R207-008,D