8 - 4
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
SWITCHES
8
HMC-C011
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 20 GHz
v05.0310
General Description
Features
Functional Diagram The HMC-C011 is a general purpose broadband
high isolation non-re ective GaAs MESFET SPDT
switch housed in a miniature hermetic module with
eld replaceable SMA connectors. Covering DC to
20 GHz, the switch offers high isolation and low
insertion loss. The switch features >45 dB isolation
up to 5 GHz and >35 dB isolation up to 20 GHz.
CMOS interface allows a single positive +5V bias
voltage at very low DC currents.
High Isolation: >45 dB up to 5 GHz
>35 dB up to 20 GHz
Low Insertion Loss: 2 dB @ 12 GHz
2.5 dB @ 16 GHz
Fast Switching
Non-Re ective Design
Hermetically Sealed Module
Field Replaceable SMA connectors
-55 °C to +85 °C Operating Temperature
Electrical Speci cations, TA = +25° C, With Vdc = +5V & 0/+5V Control, 50 Ohm System
Typical Applications
The HMC-C011 is ideal for:
• Basestation Infrastructure
• Fiber Optics & Broadband Telecom
• Microwave Radio & VSAT
• Military Radios, Radar, & ECM
• Test Instrumentation
Parameter Frequency Min. Typ. Max. Units
Insertion Loss
DC - 4.0 GHz
DC - 12.0 GHz
DC - 16.0 GHz
DC - 20.0 GHz
1.8
2.0
2.5
4.0
2.3
2.5
3.5
4.9
dB
dB
dB
dB
Isolation
DC - 4.0 GHz
DC - 8.0 GHz
DC - 20.0 GHz
41
35
25
46
40
35
dB
dB
dB
Return Loss “On State” DC - 12.0 GHz
DC - 20.0 GHz
15
10
dB
dB
Return Loss RF1, RF2 “Off State”
DC - 10.0 GHz
DC - 15.0 GHz
DC - 20.0 GHz
20
15
10
dB
dB
dB
Input Power for 1 dB Compression 0.5 - 20.0 GHz 20 23 dBm
Input Third Order Intercept
(Two-Tone Input Power= +7 dBm Each Tone)
0.5 - 10.0 GHz
0.5 - 20.0 GHz
48
45
dBm
dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 20 GHz 1.3
5.0
ns
ns
Switching Transients DC - 20 GHz 20 mVpp
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
8 - 5
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
SWITCHES
8
Isolations
Insertion Loss Return Loss
Isolation Between Ports RF1 and RF2
Input P1dB & P0.1dB Compression Point Input Third Order Intercept Point
-10
-8
-6
-4
-2
0
0 2 4 6 8 10 12 14 16 18 20 22
+25 C
+85 C
-55 C
INSERTION LOSS (dB)
FREQUENCY (GHz)
-80
-60
-40
-20
0
0 2 4 6 8 10 12 14 16 18 20 22
RF2 PATH ON
RF1 PATH ON
ISOLATION (dB)
FREQUENCY (GHz)
-80
-60
-40
-20
0
0 2 4 6 8 10 12 14 16 18 20 22
RF1
RF2
ISOLATION (dB)
FREQUENCY (GHz)
25
30
35
40
45
50
55
0 2 4 6 8 10 12 14 16 18 20 22
+25 C
+85 C
-55 C
IP3 (dBm)
FREQUENCY (GHz)
10
15
20
25
30
0 2 4 6 8 10 12 14 16 18 20 22
P1dB
P0.1dB
P1dB & P0.1dB (dBm)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0 2 4 6 8 10 12 14 16 18 20 22
RFC
RF1,RF2 ON
RF1,RF2 OFF
RETURN LOSS (dB)
FREQUENCY (GHz)
HMC-C011
v05.0310
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 20 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
8 - 6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
SWITCHES
8
Truth Table
Control Voltages
Control Input Signal Path State
Vctl RFC to RF1 RFC to RF2
High On Off
Low Off On
State Bias Condition
High +3.5 to Vdc @ 1 mA Typ.
Low 0 to +1.5V @ 20 μA Typ.
Absolute Maximum Ratings
RF Input Power +27 dBm
Supply Voltage (Vdc) +7 Vdc
Control Voltage Range (Vctl) -0.5V to Vdd +0.5V
Hot Switch Power Level +23 dBm
Storage Temperature -65 to +150 °C
Operating Temperature -55 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Bias Voltage & Current
Vdc Range = +5 Vdc ± 10%
Vdc
(Vdc)
Idc (Typ.)
(mA)
+5.0 1.4
(Bias current increases with switching rate to 15 - 20 mA.)
HMC-C011
v05.0310
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 20 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 2, 3 RFC, RF1, RF2
RF connector, SMA female, eld replaceable.
These pins are DC coupled and matched to 50 Ohms.
DC blocking capacitors are required if external RF line
potential is not equal to 0V.
4 GND Power supply ground.
5Vctl
CMOS interface, control voltages per table.
Requires active pullup to +5V (Vdc).
6Vdc Supply voltage
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
8 - 7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
SWITCHES
8
Outline Drawing
NOTES:
1. PACKAGE, LEADS, COVER MATERIAL: KOVAR™
2. FINISH: GOLD PLATE OVER NICKEL PLATE
3. MOUNTING SPACER: NICKEL PLATED ALUMINUM
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
5. TOLERANCES:
5.1 .XX = ±0.02
5.2 .XXX = ±0.010
6. FIELD REPLACEABLE SMA CONNECTORS
TENSOLITE 5602 - 5CCSF OR EQUIVALENT
7. TO MOUNT MODULE TO SYSTEM PLATFORM REPLACE 0 -80
HARDWARE WITH DESIRED MOUNTING SCREWS
HMC-C011
v05.0310
GaAs MMIC SPDT NON-REFLECTIVE
SWITCH, DC - 20 GHz
Package Information
Package Type C-5
Package Weight [1] 17.7 gms [2]
Spacer Weight 2.6 gms [2]
[1] Includes the connectors
[2] ±1 gms Tolerance
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
