D..TR/CRCW...TR Vishay Thick Film, Rectangular, Trimmable, Resistor Chips FEATURES * Thick film on high quality ceramic * Solder contacts on Ni barrier layer * Can be trimmed to required value after insertion * For applications in precision circuitry where relative tolerances can be compensated by trimming STANDARD ELECTRICAL SPECIFICATIONS LIMITING ELEMENT TEMPERATURE VOLTAGE COEFFICIENT MAX ppm/K INCH METRIC CECC 40401-802/EIA-575 V POWER RATING P70C W SIZE MODEL TOLERANCE % RESISTANCE RANGE E-SERIES 100 10; 15; 20 + 0 / - 30 10R - 10M 24 200 10; 15; 20 + 0 / - 30 R47 - 10M 24 100 10; 15; 20 + 0 / - 30 10R - 10M 24 CRCW0603TR 200 10; 15; 20 + 0 / - 30 R47 - 10M 24 D12TR 100 10; 15; 20 + 0 / - 30 10R - 10M 24 CRCW0805TR 200 10; 15; 20 + 0 / - 30 R47 - 10M 24 D25TR 100 10; 15; 20 + 0 / - 30 10R - 10M 10R - 20M 24 200 10; 15; 20 + 0 / - 30 R47 - 10M R47 - 20M 24 200 15 10R - 4M7 24 D10TR 0402 1005 0.063 50 CRCW0402TR D11TR 0603 0805 1206 1608 0.1 2012 75 0.125 3216 150 0.25 200 CRCW1206TR CRCW1210TR 1210 3225 0.33 200 CRCW2010TR 2010 5025 0.5 200 200 15 10R - 4M7 24 200 200 15 10R - 4M7 24 CRCW2512TR 2512 6332 1.0 * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material * Values from R10 to R43 with TC500 on request * Marking: no marking on device, on label only * Packaging: see appropriate catalog or web page * Tolerance + 0 ... - 10% and 15% for D10 to D25 on request TECHNICAL SPECIFICATIONS PARAMETER Rated Dissipation at 70C (CECC 40401 | EIA 575) UNIT W D10TR D11TR CRCW0402TR CRCW0603TR 0.063 0.1 D12TR CRCW0805TR 0.125 D25TR CRCW1210TR CRCW2010TR CRCW2512TR CRCW1206TR 0.25 0.33 0.5 1.0 Limiting Element Voltage2) V 50 75 150 200 200 200 200 Insulation Voltage (1 min) Vpeak 75 100 200 300 300 300 300 Thermal Resistance1) K/W 8701) 5501) 4401) 2201) 1403) 883) 653) 16 29.5 40.5 Insulation Resistance > 10 9 Category Temperature Range C - 55 to + 125 (+ 155) Weight / 1000pcs g 0.65 2 5.5 10 1) Measuring conditions in acc. to CECC 40401-802 Rated voltage: PxR 3) Depending on solder pad dimensions 2) www.vishay.com 116 For technical questions in Europe contact: ff1bresistors@vishay.com For technical questions in Americas/Asia contact: ff2aresistors@vishay.com Document Number: 20012 Revision: 22-Jul-05 D..TR/CRCW...TR Vishay Thick Film, Rectangular, Trimmable, Resistor Chips DIMENSIONS SIZE INCH METRIC DIMENSIONS [in millimeters] W H T1 L 0.35 0.05 0.25 + 0.05 - 0.10 0.2 0.1 0.85 0.1 0.45 0.05 0.3 + 0.20 - 0.10 0.3 0.2 0.45 0.05 0.3 + 0.20 - 0.10 0.3 0.2 0.55 0.05 0.45 0.2 0.4 0.2 0.55 0.05 0.6 0.05 0.6 0.05 0.45 0.2 0.6 0.25 0.6 0.25 0.4 0.2 0.6 0.25 0.6 0.25 1005 1.0 0.05 0603 1608 1.55 + 0.10 - 0.05 2.0 + 0.20 - 0.10 1.25 0.15 + 0.10 - 0.20 1.6 0.15 2.5 0.2 2.5 0.15 3.15 0.15 0805 2012 1206 3216 3.2 1210 2010 2512 3225 5025 6332 3.2 0.2 5.0 0.15 6.3 0.2 T2 0.5 0.05 0402 SOLDER PAD DIMENSIONS [in millimeters] REFLOW SOLDERING WAVE METRIC a b l a b l 1005 0.4 0.6 0.5 1608 0.5 0.9 1.0 0.9 0.9 1.0 2012 0.7 1.3 1.2 0.9 1.3 1.3 3216 0.9 1.7 2.0 1.1 1.7 2.3 3225 0.9 2.5 2.0 1.1 2.5 2.2 5025 1.0 2.5 3.9 1.2 2.5 3.9 6332 1.0 3.2 5.2 1.2 3.2 5.2 SIZE INCH 0402 0603 0805 1206 1210 2010 2512 PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: D120805IB2509KP0 D MODEL/SIZE D100402 D110603 D120805 D251206 1 2 0 8 0 SPECIAL CHARACTER I = Customer Trimmable 5 I B 2 T.C. B = 100 ppm/K A = 200 ppm/K 5 0 VALUE 3 digit value 1 digit multiplier PRODUCT DESCRIPTION: D12TR D12TR 100 25R 10% P5 100 MODEL D10TR D11TR D12TR D25TR TC 100 ppm/K 200 ppm/K K P TOLERANCE K = 10 % L = 15 % M = 20 % 3 = 0 % / - 30 % MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 9 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 25R 10 % RESISTANCE VALUE 49K9 = 49.9K 5R1 = 5.1 TOLERANCE 10 % 15 % 20 % + 0 % / - 30 % 0 PACKING P0 P5 PN B5 BN PZ SPECIAL up to 2 digits P5 PACKING1) P0 P5 PN B5 BN PZ PART NUMBER: CRCW080525R0KKTATR C MODEL/SIZE CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW2010 CRCW2512 R C W VALUE R = Decimal K = Thousand M = Million PRODUCT DESCRIPTION: CRCW0805TR MODEL CRCW0402TR CRCW0603TR CRCW0805TR CRCW1206TR CRCW1210TR CRCW2010TR CRCW2512TR 0 8 0 5 2 TOLERANCE K = 10 % L = 15 % M = 20 % W = + 0 %, - 30% R T.C. K = 100 ppm/K N = 200 ppm/K CRCWTR 0805 250 K 100 RT1 250 RESISTANCE VALUE 250 = 25R 392 = 3k9 105 = 1M0 5 0 K K T PACKING TA = RT1 TB = RT5 TC = RT6 TD = RT7 TE = RF4 TF = R02 TG = R67 TH = R82 A T R SPECIAL up to 2 digits TR = Customer Trimmable K 100 RT1 TOLERANCE K = 10 % L = 15 % M = 20 % W = + 0 %, - 30% T.C. 100 ppm/K 200 ppm/K PACKING1) RF4 RT1 R02 RT5 R67 RT6 R82 RT7 5 % = 2 sig.digits, plus multiplier NOTE: 1) Please refer to table PACKING, page 3. Document Number: 20012 Revision: 22-Jul-05 For technical questions in Europe contact: ff1bresistors@vishay.com For technical questions in Americas/Asia contact: ff2aresistors@vishay.com www.vishay.com 117 D..TR/CRCW...TR Thick Film, Rectangular, Trimmable, Resistor Chips 90 80 0402 0603 0805 1206 70 60 1210 Rated Power in % Temperature Rise in C Vishay 120 100 EIA* 80 50 60 40 2010 30 20 40 2512 20 10 0 CECC* 0 0.1 0.2 Temperature Rise 0.3 0.4 0.5 Power in Watts 0 -55 Derating -25 0 25 50 75 100 125 150 175 70 Ambient Temperature in C *There are differences in board layout and measurements between CECC and EIA. PACKING REEL MODEL PACKING CODE TAPE WIDTH D10TR DIAMETER PIECES/REEL 180mm/7" 10 000 P0/RT7 330mm/13" 50 000 PZ/RF4 180mm/7" 5 000 P5/RT1 255mm/10" 10 000 P0/RT5 PAPER1) BLISTER1) 8mm CRCW0402TR D11TR 8mm CRCW0603TR D12TR 8mm CRCW0805TR D25TR 8mm CRCW1206TR CRCW1210TR 1) 330mm/13" 20 000 PN/RT6 180mm/7" 5 000 P5/RT1 255mm/10" 10 000 P0/RT5 330mm/13" 20 000 PN/RT6 180mm/7" 5 000 P5/RT1 255mm/10" 10 000 P0/RT5 B5/na BN/na B5/na BN/na B5/na BN/na 330mm/13" 20 000 PN/RT6 180mm/7" 5 000 P5/RT1 B5/na 330mm/13" 20 000 PN/RT6 BN/na 4 000 8mm CRCW2010TR 12mm 180mm/7" CRCW2512TR 12mm 180mm/7" R02 2 000 R67 4 000 R82 European / N. American packing codes * Further information about packing: see appropriate catalog or web page www.vishay.com 118 For technical questions in Europe contact: ff1bresistors@vishay.com For technical questions in Americas/Asia contact: ff2aresistors@vishay.com Document Number: 20012 Revision: 22-Jul-05 D..TR/CRCW...TR Vishay Thick Film, Rectangular, Trimmable, Resistor Chips Trimming Instructions: YAG-Laser: The trimming length should not exceed 50% of the dimension W (width) Maximum trimming factor = 1.6 Distance between end termination and trimming cut = 0.2mm min Double cut: Distance between two cuts = 0.5mm min The laser-cut should be protected with epoxy resins PERFORMANCE REQUIREMENTS IN % 1) 0402 0603 0805 1206 1210 2010 2512 1000 hours at 70C, 1.5 hours "ON", 0.5 hours "OFF" 1.0 0.5 1.0 Endurance at UCT IEC 60115-1 4.25.3 1000 hours at 125C without load 1.0 0.5 1.0 Overload Test IEC 60115-1 4.13 Short time overload 0.5 0.25 0.5 Thermal Shock IEC 60115-1 4.19; IEC 60068-2-14; Rapid change between upper and lower category temperature 0.5 0.25 0.5 Damp Heat Steady State IEC 60115-1 4.24; IEC 60068-2-3 56 days at 40C and 93% relative humidity 0.25 0.5 1.0 Resistance to Soldering Heat IEC 60115-1 4.18; IEC 60068-2-20 10 seconds at 260C solder bath temperature 0.5 0.25 0.5 TEST CONDITIONS OF TEST Endurance Test at 70C IEC 60115-1 4.25.1 Limits for change of resistance at test. Data are valid for the non trimmed resistors only. Depending on trimming process some properties can change APPLICABLE SPECIFICATIONS * CECC40000 / 40400 / 40401-802 * EN140400 / IEC 60115 - 1 * EIA 575 * MIL-PRF-55342 Document Number: 20012 Revision: 22-Jul-05 For technical questions in Europe contact: ff1bresistors@vishay.com For technical questions in Americas/Asia contact: ff2aresistors@vishay.com www.vishay.com 119 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1