CX28985E9DS-A - Mindspeed Technologies

Complete G.shdsl/HDSL2/SDSL/

HDSL/IDSL Multimode DSL Solution

The ZipWireMulti eight-port multimode DSL solution

i m p l e m e n ts Mindspeed Te c h n o l o g i e s ’™L o o p W i za r d™

technology to diagnose line problems without expensive

test equipment or truck rolls (see LoopWizard xDSL Loop

Diagnotic Software lite r a t u r e ) . The ZipWireMulti DSL

solution goes beyond simple compliance with the ITU G.shdsl

standard by supporting the optional enhanced perfo r m a n c e

asymmetrical PSD (EPAP) modes of operation.In addition,

it complies with the ANSI HDSL2 standard (ANSI T1.418)

and provides interoperability with Mindspeed’s

market-leading ZipWire™ transceivers by operating in

2B1Q multi-rate mode. The 2B1Q mode supports

AutoBaud™for SDSL interoperability, rate optimization,

fast connect times and standards-based HDSL operation.

The ZipWireMulti also runs in IDSL mode for inte r o p e r a b i l i t y

with basic-rate ISDN repeaters. The solution supports

Mindspeed’s proprietary modes, such as 32-PAM,64 Kbps

and 3.088 Mbps operation, which provide enhanced

spectral compatibility, e x tended subscriber-line reach

and high-speed operation. One hardware circuit (i.e.,one

t r a n s fo r m e r,c rystal and hybrid) supports all these modes,

which can be configured in real time via software control.

Embedded Microprocessor

The ZipWireMulti chipset includes an embedded A R M

m i c r o p r o c e ssor and a full suite of s o f t ware that

fa c i l it a tes speedy, s i m p l i fied development of s y s tems that

comply with all applicable ITU, ANSI and ETSI standards.

The embedded microprocessor and software handle the

EOC processing and many other functions often delegate d

to an external host controller in competing solutions. This

greatly reduces software-porting effort and eliminates

real-time processing requirements for an external host

controller. The host controls the ZipWireMulti through a

simple and well-defined software API structure while the

internal ARM processor handes all real-time processing.

UTOPIA and PCM Interfaces Operate

Simultaneously

The ZipWireMulti’s integrated framers include

full-featured UTOPIA Level 2 and PCM interfaces. The

UTOPIAinterface includes ATM TC-layer processing.

The DSL payload can be mapped to either interface, or

split between them to enable simultaneous connections

to ATM- and TDM-based syste m s. This feature is

programmable on a per-port basis, and supports a mix

o f channels transporting data, data plus time slot voice,

or only time slot voice.

ZipWireMulti™

Octal G.shdsl Transceiver with Embedded Microprocessor

C X 2 8 9 8 5

>K EY F E AT U R E S

>Eight-port CO solution

implementing LoopWizard

technology

>Multimode operation

>Low power consumption

>Highly integrated solution

>Embedded microprocessor

>Simultaneous operation

ofUTOPIA Level 2 and PCM

interfaces

>Interoperable with ZipWire

2B1Q transceivers including

AutoBaud

www.mindspeed.com/salesoffices

General Information:

U.S.and Canada: (800) 854-8099

International: (949) 483-6996

Headquarters – Newport Beach

4000 MacArthur Blvd. East Tower

Newport Beach, CA 92660

Order# 500056A M01-0293

and the Mindspeed logo are tra d e m a r ks of Mindspeed Te c h n o l o g i e s. All other

t ra d e m a r ks are the pro p e rty of their respective owners. Although Mindspeed

Technologies strives for accuracy in all its publications,this material may contain

e rro rs or omissions and is subject to change without notice. This material is prov i d e d

as is and without any express or implied warranties, including merchantability, fitness

for a particular purpose and non-infringement. Mindspeed Technologies shall not be

liable for any special, i n d i re c t , incidental or consequential damages as a result of its use.

• Multimode operation including ITU

G.shdsl,with EPAP modes

(ITU G.991.2)

• ITU G.handshake (ITU G.994.1)

• HDSL2 (ANSI T1.418)

• SDSL/2B1Q (AutoBaud)

•HDSL (ITU G.991.1,ETS 101 135 and

ANSI TR-28)

• IDSL (ANSI T1.601)

• Proprietary/extended reach (ANSI

spectrum management for loop

transmission systems)

• Proprietary/high-speed (ANSI

spectrum management for loop

transmission systems)

• Low power consumption of< 1 W at

2.32 Gbps ,which includes the AFE

and line-driver dissipation

• Highly integrated solution includes

framer, microprocessor, ROM/RAM,

frequency synthesizer, DSP, AFE and

line driver

• Embedded microprocessor for

autonomous operation and EOC

processing

• Data rates from 64 Kbps to 3.088

Mbps in 8 Kbps increments

• Interoperability with ZipWire 2B1Q

transceivers, including AutoBaud

•Simultaneous operation ofUTOPIA

Level 2 and PCM interfaces on a

per-channel basis

• Central office (COT) and remote

(RT) operation

• Individual clock-recovery circuits

per channel

• Fast warm startup

• Glueless interface to popular

microprocessors

• Single hardware circuit supports all

speeds and modes ofoperation

• +1.8 V, +3.3 V and +12 V power

supplies

• JTAG boundary scan

• Package: 27 x 27 mm PBGA,

7 x 7 mm LGA

• Operating temperature: -40ºC

to +85ºC

Applications

• Digital subscriber line access

muxes (DSLAMs)

• DSL-enabled digital loop carriers

(DLCs)

• Nx64K data transport

• Remote LAN access

• T1 and E1 HDSL-enabled

transport systems

• Cellular base-station data links

• Campus modems

• Data, voice and video

transport systems

Product Highlights

The framer automatically extracts and inserts DSL overhead

(i.e., EOC,indicator and Z-bits, CRC,sync word, etc.) and passes

it to the embedded microprocessor for processing.

In addition,the framer supports all G.shdsl, HDSL2, HDSL

and IDSL frame formats; EOC messaging protocols; and other

non-standard SDSL frame formats. For non-framed protocols,

the ZipWireMulti supports a framer bypass mode.

Integrated Line Driver and Frequency Synthesizer

The ZipWireMulti includes an integrated line driver and

frequency synthesizer for a full DSL solution.The integrated

line driver can drive the high line-power EPAPs for payload

rates of768; 1,544; 2,048; and 2,304 Kbps, in compliance with

the G.shdsl standard.The frequency synthesizer, along with

the rest ofthe ZipWireMulti,supports data rates from 64

Kbps to 3.088 Mbps, and requires only one external crystal.

This highly integrated DSL solution enables OEMs to design

and manufacture the most feature-rich, lowest-power, and

highest-density DSL equipment in the industry.

CX28985 Block Diagram