Emboss Tape BH CONNECTOR H J S T 4.0/8.0/12.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- * Current rating: 1.0A AC, DC (AWG #22) * Voltage rating: 600V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,800V AC/minute * Applicable wire: AWG #28 to #22 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 1 H 2 J S T 3 Low profile connectors with high withstanding voltage, designed for connecting liquid crystal display back light lamps to their starters. * Low profile * SMT configuration * Applicable to special wires * Headers with locating bosses * Housing lock also serves as polarizing device Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) SMT type (2 circuits 4mm pitch) (2 1circuits 8mm pitch) 7 12 0.1 1.5 0.1 1.7 0.1 12 3.40.1 0.2 9 min 1.7 0.1 Through-hole type 16 0.1 22 12 1.85 0.05 9 min 6.4 0.1 0.2 3.4 0.1 9 min 6.4 0.1 9 min 9 min 6.4 0.1 1.5 0.1 1 min 6.4 0.1 0.2 3.4 0.1 6.4 0.1 12 0.1 4 0.1 19-2 1.7 0.1 4-4 2 0.05 0.05 80.05 0.7 0.1 0 0.90.1 0 4 0.1 4 0.1 1.7 0.1 0.2 (3 circuits 4mm pitch plugged up) (4 circuits 4mm pitch with post removed) 24 12 0.1 1min 1.5 0.1 3.40.1 9 min 6.4 0.1 1.4 0.1 0.2 3.4 0.1 0.2 3.4 0.1 9 min 6.4 0.1 1.5 0.1 (4 circuits 4mm pitch) 20 1.7 0.1 1min 1.7 0.1 4-4 1.5 0.1 1.7 0.1 8 0.1 4 0.1 19 1 min 1.5 0.1 9 min 1.5 0.1 1min 0.2 3.4 0.1 18 0.90.1 0 (3 circuits 4mm pitch) 0.1 8 0.1 1 min 8 0.1 1min 1.7 0.1 (2 circuits 12mm pitch) 2-12 2 0.1 0.2 3.4 0.1 9 min 6.4 0.1 8 0.1 1 min 0.2 3.4 0.1 4 0.1 1 min 1.5 0.1 1(27circuits 8mm pitch plugged up) (2 circuits 8mm pitch with bosses) 6.4 0.1 2-4 1.5 0.1 1.7 0.1 Note: 1. Tolerances are for pattern non-cumulative: 0.05mm for all centers. Tolerance for hole size is 0.1. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as guideline. Contact JST for details. 1 BH CONNECTOR Contact Applicable wire mm2 AWG # Model No. SBH-001T-P0.5 0.080.33 Q'ty / reel 1.6 2.4 4,000 2822 Material and Finish 7.35 2.2 Insulation O.D. (mm) 1.5 3.1 Phosphor bronze, tin-plated (reflow treatment) 1.5 1.6 RoHS compliance Note: Wire conductors should be tin-plated annealed copper strands. Applicator Dies Crimping machine Crimp applicator Contact MKS-L SBH-001T-P0.5 AP-K2N * MKS-SC1-1 Crimp applicator with dies MK/SBH/M-001-05 APLMK SBH/M001-05 SC/SBH/M-001-05 APLSC SBH/M001-05 Note: *Strip-crimp applicator Housing Circuits Pitch (mm) 2 to 4 circuits 4 B 3.2 A 2 8 Note1) 8 H JST 12 8.8 3 Note2) 4 5.1 4 4 4 4 5 4 Dimensions (mm) Model No. B Q'ty / bag 4.0 9.8 1,000 8.0 13.8 1,000 8.0 13.8 1,000 12.0 17.8 1,000 8.0 13.8 1,000 12.0 17.8 1,000 12.0 17.8 1,000 16.0 21.8 1,000 A BHR-02VS-1 BHR-03VS-1 BHR-02(8.0)VS-1N BHR-04VS-1 BHR-03VS-1 BHR-03(4-3)VS-1N BHR-04VS-1 BHR-05VS-1 2.2 Material 5 circuits PA 66, UL94V-0, natural (white) 3.2 21.8 RoHS compliance Note: 1. BHR-02(8.0)VS-1N: 2 circuits 8.0mm pitch plugged up. 2. BHR-03(4-3)VS-1N: 4 circuits 4.0mm pitch header with circuit No.3 plugged up. 5.1 8.8 H JST 2.2 4 16 18.4 19.6 Through-hole type shrouded header Circuits Pitch (mm) 2 8 Model No. S02(8.0)B-BHS 14 10.4 7.1 3 1 RoHS compliance This product displays (LF)(SN) on a label. Note: The applicable housing is "BHR-02(8.0)VS-1N" only. (3.2) 3.2 2 Material and Finish Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA, UL94V-0, natural (ivory) 8 12 Q'ty / tray 1,000 6.85 BH CONNECTOR SMT type shrouded header (2 circuits 4mm pitch) (2 circuits 8mm pitch) 10 14 6.4 7.1 3 10.4 1.5 8 7.1 3 1.5 3.2 3.2 4 (2 circuits 8mm pitch with bosses) (2 circuits 8mm pitch plugged up) Note 1) Note 2) 14 10.4 14 3 7.1 10.4 1.5 3 8 7.1 1.5 3.2 3.2 8 5 12 (2 circuits 8mm pitch with ribs against prying) (2 circuits 12mm pitch) Note 4) 18 14 10.4 14.4 7.1 12 1.5 3 7.1 1.5 3.2 3.2 8 No.1 (3 circuits 4mm pitch) (3 circuits 4mm pitch plugged up) 14 Note 3) 10.4 8 18 12 7.1 3 1.5 4 14.4 3 7.1 1.5 3.2 3.2 4 (4 circuits 4mm pitch) 18 14.4 12 4 8 2 Note1) 8 Note2) 8 Note4) 8 12 3 4 Note3) 4 4 4 5 Note5) 4 Model No. SM02(4.0)B-BHS-1-TB SM02(8.0)B-BHS-1-TB SM02(8.0)B-BHS-TB SM02(8.0)B-BHS-1N-TB SM02(8.0)B-BHS-1R-TB SM02(12)B-BHS-1-TB SM03(4.0)B-BHS-1-TB SM03(7-D1)B-BHS-1N-TB SM04(4.0)B-BHS-1-TB SM04(9-E2)B-BHS-1-TB 7.1 1.5 (4 circuits 4mm pitch with post removed) Note 5) 22 18.4 16 12 Material and Finish 7.1 1.5 4 3.2 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 3 4 Q'ty / reel 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 3.2 Circuits Pitch(mm) RoHS compliance This product displays (LF)(SN) on a label. No.1 Note: 1. Header with bosses. Contact JST for other circuits headers with bosses. 2. 2 circuits 8.0mm pitch plugged up. 3. 4 circuits 4.0mm pitch header with circuit No.3 plugged up. 4. Header with ribs against prying. Contact JST for other circuits headers with ribs against prying. 5. 5 circuits 4.0mm pitch header with circuit No.3 post removed. 6. The products listed above are supplied on embossed tape. 7. Products with bosses supplied in loose piece are also available. Contact JST for details. 3