SMCJ5.0CA/9T - Vishay Semiconductors

SMCJ5.0A thru SMCJ188CA

www.vishay.com Vishay General Semiconductor

Revision: 10-Dec-13 1Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount TRANSZORB®

Transient Voltage Suppressors

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g. SMCJ188CA).

Electrical characteristics apply in both directions.

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of

260 °C

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

MECHANICAL DATA

Case: DO-214AB (SMCJ)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS compliant, commercial grade

Base P/NHE3 - RoHS compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: For uni-directional types the band denotes

cathode end, no marking on bi-directional types

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2.

(2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal

PRIMARY CHARACTERISTICS

VBR uni-directional 6.40 V to 231 V

VBR bi-directional 6.40 V to 231 V

VWM 5.0 V to 188 V

PPPM 1500 W

PD6.5 W

IFSM (uni-directional only) 200 A

TJ max. 150 °C

Polarity Uni-directional, bi-directional

Package DO-214AB (SMCJ)

DO-214AB (SMC)

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) PPPM 1500 W

Peak pulse current with a 10/1000 μs waveform (1) IPPM See next table A

Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) IFSM 200 A

Power dissipation on infinite heatsink, TA = 50 °C PD6.5 W

Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C

SMCJ5.0A thru SMCJ188CA

www.vishay.com Vishay General Semiconductor

Revision: 10-Dec-13 2Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Pulse test: tp  50 ms

(2) Surge current waveform per fig. 3 and derate per fig. 2

(3) For bi-directional types having VWM of 10 V and less, the ID limit is doubled

(4) All terms and symbols are consistent with ANSI/IEEE C62.35

(5) For the bi-directional SMCJ5.0CA, the maximum VBR is 7.25 V

(6) V

F = 3.5 V at IF = 100 A (uni-directional only)

(+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

DEVICE TYPE

MODIFIED 

“J” BEND LEAD

DEVICE MARKING

CODE

BREAKDOWN

VOLTAGE

VBR AT IT (1)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

VWM

(V)

MAXIMUM

REVERSE

LEAKAGE

AT VWM

ID (μA) (3)

MAXIMUM

PEAK PULSE

SURGE

CURRENT

IPPM (A) (2)

MAXIMUM

CLAMPING

VOLTAGE AT

IPPM

VC (V)

UNI BI MIN. MAX.

(+)SMCJ5.0A (5) GDE GDE 6.40 7.07 10 5.0 1000 163.0 9.2

(+)SMCJ6.0A GDG GDG 6.67 7.37 10 6.0 1000 145.6 10.3

(+)SMCJ6.5A GDK BDK 7.22 7.98 10 6.5 500 133.9 11.2

(+)SMCJ7.0A GDM GDM 7.78 8.60 10 7.0 200 125.0 12.0

(+)SMCJ7.5A GDP BDP 8.33 9.21 1.0 7.5 100 116.3 12.9

(+)SMCJ8.0A GDR BDR 8.89 9.83 1.0 8.0 50 110.3 13.6

(+)SMCJ8.5A GDT BDT 9.44 10.4 1.0 8.5 20 104.2 14.4

(+)SMCJ9.0A GDV BDV 10.0 11.1 1.0 9.0 10 97.4 15.4

(+)SMCJ10A GDX BDX 11.1 12.3 1.0 10 5.0 88.2 17.0

(+)SMCJ11A GDZ GDZ 12.2 13.5 1.0 11 5.0 82.4 18.2

(+)SMCJ12A GEE BEE 13.3 14.7 1.0 12 5.0 75.4 19.9

(+)SMCJ13A GEG GEG 14.4 15.9 1.0 13 1.0 69.8 21.5

(+)SMCJ14A GEK BEK 15.6 17.2 1.0 14 1.0 64.7 23.2

(+)SMCJ15A GEM BEM 16.7 18.5 1.0 15 1.0 61.5 24.4

(+)SMCJ16A GEP GEP 17.8 19.7 1.0 16 1.0 57.7 26.0

(+)SMCJ17A GER GER 18.9 20.9 1.0 17 1.0 54.3 27.6

(+)SMCJ18A GET BET 20.0 22.1 1.0 18 1.0 51.4 29.2

(+)SMCJ20A GEV BEV 22.2 24.5 1.0 20 1.0 46.3 32.4

(+)SMCJ22A GEX BEX 24.4 26.9 1.0 22 1.0 42.3 35.5

(+)SMCJ24A GEZ BEZ 26.7 29.5 1.0 24 1.0 38.6 38.9

(+)SMCJ26A GFE BFE 28.9 31.9 1.0 26 1.0 35.6 42.1

(+)SMCJ28A GFG BFG 31.1 34.4 1.0 28 1.0 33.0 45.4

(+)SMCJ30A GFK BFK 33.3 36.8 1.0 30 1.0 31.0 48.4

(+)SMCJ33A GFM BFM 36.7 40.6 1.0 33 1.0 28.1 53.3

(+)SMCJ36A GFP BFP 40.0 44.2 1.0 36 1.0 25.8 58.1

(+)SMCJ40A GFR BFR 44.4 49.1 1.0 40 1.0 23.3 64.5

(+)SMCJ43A GFT BFT 47.8 52.8 1.0 43 1.0 21.6 69.4

(+)SMCJ45A GFV GFV 50.0 55.3 1.0 45 1.0 20.6 72.7

(+)SMCJ48A GFX GFX 53.3 58.9 1.0 48 1.0 19.4 77.4

(+)SMCJ51A GFZ GFZ 56.7 62.7 1.0 51 1.0 18.2 82.4

(+)SMCJ54A GGE GGE 60.0 66.3 1.0 54 1.0 17.2 87.1

(+)SMCJ58A GGG GGG 64.4 71.2 1.0 58 1.0 16.0 93.6

(+)SMCJ60A GGK GGK 66.7 73.7 1.0 60 1.0 15.5 96.8

(+)SMCJ64A GGM GGM 71.1 78.6 1.0 64 1.0 14.6 103

(+)SMCJ70A GGP GGP 77.8 86.0 1.0 70 1.0 13.3 113

(+)SMCJ75A GGR GGR 83.3 92.1 1.0 75 1.0 12.4 121

(+)SMCJ78A GGT GGT 86.7 95.8 1.0 78 1.0 11.9 126

(+)SMCJ85A GGV GGV 94.4 104 1.0 85 1.0 10.9 137

(+)SMCJ90A GGX GGX 100 111 1.0 90 1.0 10.3 146

(+)SMCJ100A GGZ GGZ 111 123 1.0 100 1.0 9.3 162

(+)SMCJ110A GHE GHE 122 135 1.0 110 1.0 8.5 177

(+)SMCJ120A GHG GHG 133 147 1.0 120 1.0 7.8 193

(+)SMCJ130A GHK GHK 144 159 1.0 130 1.0 7.2 209

(+)SMCJ150A GHM GHM 167 185 1.0 150 1.0 6.2 243

(+)SMCJ160A GHP GHP 178 197 1.0 160 1.0 5.8 259

(+)SMCJ170A GHR GHR 189 209 1.0 170 1.0 5.5 275

SMCJ188A GHS GHS 209 231 1.0 188 1.0 4.6 328

SMCJ5.0A thru SMCJ188CA

www.vishay.com Vishay General Semiconductor

Revision: 10-Dec-13 3Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Mounted on minimum recommended pad layout

Note

(1) AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 3 - Pulse Waveform

Fig. 4 - Typical Junction Capacitance Uni-Directional

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Typical thermal resistance, junction to ambient air (1) RJA 75 °C/ W

Typical thermal resistance, junction to lead RJL 15

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

SMCJ5.0A-E3/57T 0.211 57T 850 7" diameter plastic tape and reel

SMCJ5.0A-E3/9AT 0.211 9AT 3500 13" diameter plastic tape and reel

SMCJ5.0AHE3/57T (1) 0.211 57T 850 7" diameter plastic tape and reel

SMCJ5.0AHE3/9AT (1) 0.211 9AT 3500 13" diameter plastic tape and reel

0.1

100

0.31 x 0.31" (8.0 x 8.0 mm)

Copper Pad Areas

PPM

- Peak Pulse Power (kW)

td - Pulse Width (s)

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

0 255075100

100

125 150 175 200

TJ - Initial Temperature (°C)

Peak Pulse Power (P

) or Current (I

)

Derating in Percentage, %

100

150

= 10 µs

Peak Value

IPPM

Half Value -

IPPM

10/1000 µs Waveform

as defined by R.E.A.

01.0 2.0 3.0 4.0

t - Time (ms)

PPM

- Peak Pulse Current, % I

RSM

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

100

1000

10 000

20 000

101 100 400

Uni-Directional

Bi-Directional T

= 25 °C

f = 1.0 MHz

sig

= 50 mVp-p

Measured at

Zero Bias

, Measured at

Stand-Off

Voltage V

- Junction Capacitance (pF)

VWM - Reverse Stand-Off Voltage (V)

SMCJ5.0A thru SMCJ188CA

www.vishay.com Vishay General Semiconductor

Revision: 10-Dec-13 4Document Number: 88394

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Typical Transient Thermal Impedance Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current

Uni-Directional Use Only

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.1

1.0

100

0.001 0.01 0.1 10 1 100 1000

tp - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

100

200

TJ = TJ max.

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

0.260 (6.60)

0.280 (7.11)

0.006 (0.152)

0.012 (0.305)

0.030 (0.76)

0.060 (1.52)

0.008 (0.2)

0.305 (7.75)

0.320 (8.13)

0.220 (5.59)

0.246 (6.22)

0.079 (2.06)

0.103 (2.62)

0.114 (2.90)

0.126 (3.20)

Cathode Band

DO-214AB (SMC J-Bend)

0.320 REF.

0.060 (1.52)

MIN.

Mounting Pad Layout

0 (0)

0.126 (3.20)

MIN.

0.185 (4.69)

MAX.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

SMCJ100A-E3/1T SMCJ100CA/1T SMCJ100CA-E3/1T SMCJ100-E3/1T SMCJ10A/1T SMCJ10A-E3/1T

SMCJ10CA/1T SMCJ10CA-E3/1T SMCJ10-E3/1T SMCJ11/1T SMCJ110A-E3/1T SMCJ110CA-E3/1T SMCJ11A-

E3/1T SMCJ11CA-E3/1T SMCJ11-E3/1T SMCJ120A-E3/1T SMCJ120CA-E3/1T SMCJ12A-E3/1T SMCJ12CA/1T

SMCJ12CA-E3/1T SMCJ12C-E3/1T SMCJ12-E3/1T SMCJ130A/1T SMCJ130A-E3/1T SMCJ130CA-E3/1T

SMCJ130-E3/1T SMCJ13A-E3/1T SMCJ13CA-E3/1T SMCJ14A-E3/1T SMCJ14CA-E3/1T SMCJ150A-E3/1T

SMCJ150CA/1T SMCJ150CA-E3/1T SMCJ15A/1T SMCJ15A-E3/1T SMCJ15C/1T SMCJ15CA/1T SMCJ15CA-

E3/1T SMCJ15C-E3/1T SMCJ160A/1T SMCJ160A-E3/1T SMCJ160CA-E3/1T SMCJ16A-E3/1T SMCJ16CA/1T

SMCJ16CA-E3/1T SMCJ16C-E3/1T SMCJ16-E3/1T SMCJ170A-E3/1T SMCJ170CA/1T SMCJ170CA-E3/1T

SMCJ170-E3/1T SMCJ17A-E3/1T SMCJ17CA-E3/1T SMCJ18/1T SMCJ188CA-E3/1T SMCJ18A-E3/1T

SMCJ18CA/1T SMCJ18CA/9AT SMCJ18CA-E3/1T SMCJ18-E3/1T SMCJ20A/1T SMCJ20A-E3/1T SMCJ20CA/1T

SMCJ20CA-E3/1T SMCJ22A-E3/1T SMCJ22CA-E3/1T SMCJ22C-E3/1T SMCJ22-E3/1T SMCJ24A/1T SMCJ24A-

E3/1T SMCJ24CA/1T SMCJ24CA-E3/1T SMCJ24C-E3/1T SMCJ24-E3/1T SMCJ26A-E3/1T SMCJ26CA-E3/1T

SMCJ26C-E3/1T SMCJ26-E3/1T SMCJ28A-E3/1T SMCJ28CA-E3/1T SMCJ28-E3/1T SMCJ30A-E3/1T

SMCJ30CA/1T SMCJ30CA-E3/1T SMCJ30-E3/1T SMCJ33/1T SMCJ33A-E3/1T SMCJ33C/1T SMCJ33CA/1T

SMCJ33CA-E3/1T SMCJ33C-E3/1T SMCJ33-E3/1T SMCJ36A/1T SMCJ36A-E3/1T SMCJ36CA/1T SMCJ36CA-

E3/1T SMCJ36C-E3/1T SMCJ36-E3/1T SMCJ40A/1T SMCJ40A-E3/1T