COMMUNICATIONS MODULES & SUBSYSTEMS
Key Features • Offers high-density packing for the full C-band
• Provides high channel uniformity
• Complies with ITU-T G.694.1 100-GHz DWDM
transceivers
• Fits into EIA 19-in, 23-in, and ETSI 300-mm racks
• Power is not required; thermally stable passive optics
The WaveReady 40-channel universal multiplexer is a scalable high-capacity terminal
dense wavelength division multiplexing (DWDM) solution that can multiplex up to
40 wavelengths ontoasingle fiber.
By providing access to forty 100-GHz spaced channels, this multiplexer
maximizes the capacity ofthe C-band range. In conjunction with the WaveReady
line of transponders and amplifiers, the 40-channel universal multiplexer
supports a wide range of architectures from simple point-to-point to amplified
ring configurations with dynamic add/drop.
The 40-channel universal multiplexer requires no electrical power and generates
no heat, noise, or radiated emissions. With its high channel uniformity, low
insertion loss, and virtually zero chromatic dispersion, the 40-channel universal
multiplexermaintains compatibility with all digital transmission standards and
data rates up to 10 Gbps.
Applications
• Supports terminal mux/demux
applications
• Supports high-capacity optical
transmission systems
• Supports bidirectional transmission
on a single fiber and linear and ring
architectures requiring wavelength
reuse
Compliance
• ITU-T G694.1
• GR-1221 and 1209
WaveReady™40-Channel Universal Multiplexer
NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.com/wavereadyWORLDWIDE:+800 5378-JDSU
Point-to-point amplified link
Specifications
Optical Performance1
Parameter Minimum Typical Maximum
Channel spacing 100 GHz
Insertion loss 5.1 dB
Channel non-uniformity 1.5 dB
Monitor tap ratio 14 dB 17 dB 19.5 dB
Channel bandwidth ITUλ± 0.1 nm
Adjacent channel isolation 26 dB
Non-adjacent channel isolation 33 dB
Polarization dependent loss 0.5 dB
Polarization mode dispersion 0.5 ps
Optical return loss 40 dB
Input optical power—sum of all channel ports 250 mW
Physical Characteristics
Size(H x WxL) excluding mounting brackets 4.45 x 44.2 x 30.5 cm
(1.75 x 17.4 x 12 in)
Rack mounting options ETSI,19- or 23-inch rack mount
Optical connector type (all ports) LC/PC bulkhead
Environmental Characteristics
Operating ambient temperature (short term) –5 to +55ºC
Operating ambient temperature (extended term) +10 to +40ºC
Storage temperature –40 to +85ºC
Relative humidity (non-condensing) 5 to 95%
2
WaveReady 40-CHANNEL UNIVERSAL MULTIPLEXER
1Specifications are worst case, end-of-life over specified temperature and wavelength range
WaveReady 40-CHANNEL UNIVERSAL MULTIPLEXER
Channel Plan
3
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU
directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com.
Product Code Description
MDX-40UX100CB 40-Channel Universal Multiplexer
Channel Frequency Wavelength Channel Frequency Wavelength
(GHz) (nm) (GHz) (nm)
20 192 1561.42 40 194.0 1545.32
21 192.1 1560.61 41 194.1 1544.93
22 192.2 1559.79 42 194.2 1543.73
23 192.3 1558.98 43 194.3 1542.94
24 192.4 1558.17 44 194.4 1542.14
25 192.5 1557.36 45 194.5 1541.35
26 192.6 1556.55 46 194.6 1540.56
27 192.7 1555.75 47 194.7 1539.77
28 192.8 1554.94 48 194.8 1538.98
29 192.9 1554.13 49 194.9 1538.19
30 193 1553.33 50 195 1537.40
31 193.1 1552.52 51 195.1 1536.61
32 193.2 1551.72 52 195.2 1535.82
33 193.3 1550.92 53 195.3 1535.04
34 193.4 1550.12 54 195.4 1534.25
35 193.5 1549.32 55 195.5 1533.47
36 193.6 1548.51 56 195.6 1532.68
37 193.7 1547.72 57 195.7 1531.90
38 193.8 1546.92 58 195.8 1531.12
39 193.9 1546.12 59 195.9 1530.33
WaveReady 40-CHANNEL UNIVERSAL MULTIPLEXER
NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.com/wavereadyWORLDWIDE:+800 5378-JDSU
Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30162580 000 1108 WR40CUMUX.DS.CMS.AE November 2008
