Scotch®
High Performance Masking Tape
232
Technical Data February, 2011
Product Description Scotch® High Performance Masking Tape 232 is designed to be used in medium
temperature paint bake operations.
Product Construction Backing Adhesive Color Standard Roll Length
Smooth crepe paper with a Rubber Tan 55 m (60.17 yds.)*
solvent resistant saturant
*Available in metric widths (eg, 24 mm corresponds to 1 inch).
Typical Physical
Properties Note: The following technical information and data should be considered r epr esentative
or typical only and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel: 37 oz./in. width (41 N/100 mm) D-3330
Tensile Strength: 27 lbs./in. width (472 N/100 mm) D-3759
Elongation at Break: 8% D-3759
Tape Thickness: 6.3 mils (0.16 mm) D-3652
Temperature Use Range: Up to 250°F (121°C) for 30 minutes
Features • Has been laboratory tested on painted panels and found to remove cleanly at bake
temperatures of up to 250°F (121°C) for 30 minutes. The actual temperature and
time performance may be higher or lower for a given application. Clean removal
can vary dependent on surface type, processing conditions (such as multiple
bakes), type of paint involved as well as the temperature of the surface at removal.
We recommend testing the product under your conditions to determ ine if it meets
your needs.
• Excellent transfer resistance to “difficult to remove from” surfaces like EDPM
rubber moldings.
• Tests indicate it is better than conventional masking tapes for sunlight resistance,
it is still advised that it not be subjected to outdoor exposure or prolonged periods
of sunlight as tape may become difficult to remove.
• Can be qualified for PPP-T-42C, Type I, (CID-A-A-883A).
Application Ideas • Excellent paint masking tape.
• Used throughout industry for holding, protecting, bundling and a vast number of
other difficult jobs where a pressure sensitive tape is needed.
Scotch® High Performance Masking Tape
232
Storage Store under normal conditions of 70°F (21°C) and 50% R.H. in the original carton.
Shelf Life To obtain best performance, use this product within one year from date of
manufacture.
Technical Information The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Product Use Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
ISO
9001:
2008
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2008 standards.
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
Scotch is a registered trademark of 3M.
Printed in U.S.A.
©3M 2011 70070944247 (2/11)
