Click on Series name for product info on aimtec.com Not recommended for new design Use AM2D-Z series Series AM2D-NZ 2 Watt | DC-DC Converter FEATURES: * * * * RoHS Compliant Low ripple and noise High efficiency up to 89% UL94-VO case Models Single output Model Input Voltage (V) AM2D-0505S-NZ AM2D-0509S-NZ AM2D-0512S-NZ AM2D-0515S-NZ AM2D-1205S-NZ AM2D-1209S-NZ AM2D-1212S-NZ AM2D-1215S-NZ AM2D-2405S-NZ AM2D-2409S-NZ AM2D-2412S-NZ AM2D-2415S-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 AM2D-0505SH30-NZ AM2D-0509SH30-NZ AM2D-0512SH30-NZ AM2D-0515SH30-NZ AM2D-1205SH30-NZ AM2D-1209SH30-NZ AM2D-1212SH30-NZ AM2D-1215SH30-NZ AM2D-2405SH30-NZ AM2D-2409SH30-NZ AM2D-2412SH30-NZ AM2D-2415SH30-NZ Models Dual output Model AM2D-0505D-NZ AM2D-0509D-NZ AM2D-0512D-NZ AM2D-0515D-NZ AM2D-1205D-NZ AM2D-1209D-NZ AM2D-1212D-NZ AM2D-1215D-NZ AM2D-2405D-NZ AM2D-2409D-NZ AM2D-2412D-NZ AM2D-2415D-NZ AM2D-0505DH30-NZ AM2D-0509DH30-NZ www.aimtec.com F 051e R11.M Output Voltage (V) * * * * * Input / Output Isolation 1000, 3000VDC Operating temperature -40oC to + 105oC Pin compatible with multiple manufacturers 7 pin SIP package Continuous Short Circuit Protection Output Current max(mA) Isolation (VDC) Efficiency (%) 5 9 12 15 5 9 12 15 5 9 12 15 400 222 167 134 400 222 167 134 400 222 167 134 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 89 84 84 84 84 84 84 84 84 84 84 84 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 5 9 12 15 5 9 12 15 400 222 167 134 400 222 167 134 400 222 167 134 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 80 81 82 84 80 83 84 85 81 84 85 86 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 200 111 3000 3000 82 83 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 4.5-5.5 4.5-5.5 5 9 12 15 5 9 12 15 5 9 12 15 200 111 83 67 200 111 83 67 200 111 83 67 5 9 Tel: +1 514 620 2722 1 of 4 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 80 84 84 84 80 84 85 84 80 84 84 84 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11 Series AM2D-NZ Not recommended for new design Models Dual output (continued) Model AM2D-0512DH30-NZ AM2D-0515DH30-NZ AM2D-1205DH30-NZ AM2D-1209DH30-NZ AM2D-1212DH30-NZ AM2D-1215DH30-NZ AM2D-2405DH30-NZ AM2D-2409DH30-NZ AM2D-2412DH30-NZ AM2D-2415DH30-NZ Input Voltage (V) 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Input Specifications Parameters Voltage range Filter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Use AM2D-Z series Output Voltage (V) 12 15 5 9 12 15 5 9 12 15 Nominal Output Current max (mA) 83 67 200 111 83 67 200 111 83 67 Typical 5 12 24 4.5-5.5 10.8-13.2 21.6-26.4 Conditions Typical 60 sec For 1.0% of Vin For 1.0% of Vin Load 10~100% Load 10~100% At 20MHz Bandwidth 100% load 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 85 85 83 84 86 86 84 85 87 87 Units Capacitor Rated 1000 and 3000 Maximum See tolerance graph 1 Continuous automatic recovery 1.2 1.2 8 8 0.03 75 Typical 100 Efficiency (%) VDC Typical Dual output Isolation (VDC) Maximum > 1000 60 Conditions Conditions 2 Watt | DC-DC Converter Maximum -40 to +75 -55 to +125 300 +105 Units VDC MOhm pF Units % % % % % %/oC mV p-p Units KHz o C o C o C Cooling Free air convection Humidity 95 % Case material Plastic UL94-VO Weight 2.4 g 0.772 x 0.276 x 0.394 inch 19.60 x 7.00 x 10.0 mm Dimensions (L x W x H) MTBF >3 500 000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R11.M Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11 Not recommended for new design Use AM2D-Z series Safety Specifications Parameters Agency approvals Standards Designed to meet EN55022 Class B (with recommended circuit) IEC / EN61000-4-2 Contact 6K Criteria B IEC / EN61000-4-2 Contact 8K Criteria B Pin Out Specifications Pin 1 2 4 5 6 7 1000VDC Single Dual + V Input - V Input -V Output No pin + V Output No pin Series AM2D-NZ 2 Watt | DC-DC Converter 3000VDC Single Dual + V Input - V Input - V Output Common + V Output No pin + V Input - V Input No pin -V Output No pin +V Output + V Input - V Input No pin -V Output Common +V Output Dimensions 19.60 (0.77) 7.00 (0.267) PRINTED FACE 9.50 (0.37) 10.00 (0.39) 0.50 (0.02) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) 7.00 (0.26) 0.50 (0.02) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.25 (0.05) Typical characteristics Tolerance Envelope Graph +10% Typic a +5% l load line +2.5% Output Voltage (%) -2.5% Nominal Voltage -7.5% 10% 50% 100% Output Current (%) www.aimtec.com F 051e R11.M Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11 Series AM2D-NZ Not recommended for new design Use AM2D-Z series Typical EMI Filter 2 Watt | DC-DC Converter Vin+ 4.7F / 50V Vo+ Aimtec DC/DC Converter Vin- Load Vin+ LDM 6.8H Vo- Vin* -470pF / 3KV *- Optional for 12 & 15V output Models Derating Free Air Convection 85 C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 105 100 Ambient Temperature C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.M Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11