SIGC156T120R2CL - Infineon Technologies AG

SIGC156T120R2CL

Edited by INFINEON Technologies AI PS DD HV3, L 7181-P, Edition 2, 03.09.2003

IGBT Chip in NPT-technology

This chip is used for:

• power module

BSM100GD120DLC

FEATURES:

• 1200V NPT technology

• 180µm chip

• low turn-off losses

• positive temperature coefficient

• easy paralleling

• integrated gate resistor

Applications:

• drives

Chip Type VCE ICn Die Size Package Ordering Code

SIGC156T120R2CL

1200V

100A 12.59 X 12.59 mm2

sawn on foil Q67041-

A4663-A003

MECHANICAL PARAMETER:

Raster size 12.59 X 12.59

Emitter pad size 8 x ( 3.98 x 2.38 )

Gate pad size 1.46 x 0.8

Area total / active 158.5 / 132.6

mm2

Thickness 180 µm

Wafer size 150 mm

Flat position 90 grd

Max.possible chips per wafer 82 pcs

Passivation frontside Photoimide

Emitter metallization 3200 nm Al Si 1%

Collector metallization 1400 nm Ni Ag –system

suitable for epoxy and soft solder die bonding

Die bond electrically conductive glue or solder

Wire bond Al, <500µm

Reject Ink Dot Size ∅ 0.65mm ; max 1.2mm

Recommended Storage Environment store in original container, in dry nitrogen,

< 6 month at an ambient temperature of 23°C

SIGC156T120R2CL

Edited by INFINEON Technologies AI PS DD HV3, L 7181-P, Edition 2, 03.09.2003

MAXIMUM RATINGS:

Parameter Symbol Value Unit

Collector-emitter voltage, Tj=25 °C VCE 1200 V

DC collector current, limited by Tjmax IC 1 ) A

Pulsed collector current, tp limited by Tjmax Icpuls 300 A

Gate emitter voltage VGE ±20 V

Operating junction and storage temperature Tj, Tstg -55 ... +150 °C

1 ) depending on thermal properties of assembly

STATIC CHARACTERISTICS (tested on chip), Tj=25 °C, unless otherwise specified:

Value

Parameter Symbol Conditions min. typ. max. Unit

Collector-emitter breakdown voltage V(BR)CES VGE=0V , IC=5mA 1200

Collector-emitter saturation voltage VCE(sat) VGE=15V, IC=100A 1.8 2.2 2.6

Gate-emitter threshold voltage VGE(th) IC=4mA , VGE=VCE 4.5 5.5 6.5

Zero gate voltage collector current ICES VCE=1200V , VGE=0V 12.2 µA

Gate-emitter leakage current IGES VCE=0V , VGE=20V 600 nA

Integrated gate resistor RGint 5 Ω

ELECTRICAL CHARACTERISTICS (tested at component):

Value

Parameter Symbol Conditions min. typ. max. Unit

Input capacitance Ciss - 6.5 -

Output capacitance Coss - - -

Reverse transfer capacitance Crss

VCE=25V,

VGE=0V,

f=1MHz - 0.42 -

SWITCHING CHARACTERISTICS (tested at component), Inductive Load

Value

Parameter Symbol Conditions 1) min. typ. max. Unit

Turn-on delay time td(on) - 60 -

Rise time tr - 50 -

Turn-off delay time td(off) - 400 -

Fall time tf

Tj=125°C

VCC=600V,

IC=100A,

VGE=±15V,

RG=5.6Ω - 80 -

1) values also influenced by parasitic L- and C- in measurement and package.

SIGC156T120R2CL

Edited by INFINEON Technologies AI PS DD HV3, L 7181-P, Edition 2, 03.09.2003

CHIP DRAWING:

SIGC156T120R2CL

Edited by INFINEON Technologies AI PS DD HV3, L 7181-P, Edition 2, 03.09.2003

FURTHER ELECTRICAL CHARACTERISTICS:

This chip data sheet refers to the

device data sheet BSM100GD120DLC Package Econopack 3

DESCRIPTION:

AQL 0,65 for visual inspection according to failure catalog

Electrostatic Discharge Sensitive Device according to MIL-STD 883

Test-Normen Villach/Prüffeld

Published by

Infineon Technologies AG,

Bereich Kommunikation

St.-Martin-Strasse 53,

D-81541 München

Attention please!

The information herein is given to describe certain components and shall not be considered as warranted

characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,

regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest

Infineon Technologies Office in Germany or our Infineon Technologies Representatives world -wide (see

address list).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types

in question please contact your nearest Infineon Technologies Office.

Infineon Technologies components may only be used in life-support devices or systems with the express

written approval of Infineon Technologies, if a failure of such components can reasonably be expected to

cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or

system. Life support devices or systems are intended to be implanted in the human body, or to support

and / or maintain and sustain and / or protect human life. If they fail, it is reasonable to assume that the

health of the user or other persons may be endangered.