Products described within this catalog may be protected by one or more of the following U.S. patents: 5,255,580 5,329,697 Other Patents Pending Maximum Torque Values for 4-40 UNC Threads TORQUE MATERIAL Nm in-lb in-oz Phos. Bronze 0.90 8.0 128 Brass 0.68 6.0 96 Aluminum 0.45 4.0 64 Nylon 0.11 1.0 16 These torque values are applicable for threads only and do not apply to hardware assemblies. These torque values are approximate and should not be accepted as accurate limits. Indeterminant factors in specific applications preclude the publication of accurate torque values for universal use. Unless specified otherwise, dimensional tolerances are: 1) 0.001 inches (0.03 mm) for male contact mating diameters. 2) 0.003 inches (0.08 mm) for contact termination diameters. 3) 0.005 inches (0.13 mm) for all other diameters. 4) 0.015 inches (0.38 mm) for all other dimensions. 5) 0.0015 inches (0.038 mm) for all press-fit contact terminations. CATALOG NUMBER: C-001 REV .A PRINTED DATE: APRIL 2001 PUBLISHED IN THE UNITED STATES OF AMERICA Positronic Industries believes the data contained herein to be reliable. Since the technical information is given free of charge, the user employs such information at his own discretion and risk. Positronic Industries assumes no responsibility for results obtained or damages incurred from use of such information in whole or in part. Positronic Industries' FEDERAL SUPPLY CODE FOR MANUFACTURERS is number 28198. TABLE OF CONTENTS MATED CONNECTOR ASSEMBLIES. . . . . . . . . . . . . . . . 1-2 Exploded views of typical mated Subminiature-D connector assemblies. MELO-D and EURO-D CONNECTORS. . . . . . . . . . . . . . 3-10 MD Series and ED Series. Fixed contact, 7.5 ampere nominal rating. Solder cup, wrap post, and printed board contact terminations for inch and metric printed board hole patterns. Six connector variants, 9 through 50 contacts. Professional quality connectors to IEC 807-2, Performance Level Two. SOLI-D CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . 11-19 SD Series. Removable contact, 7.5 ampere nominal rating. Solder cup, crimp and straight printed board mount contact terminations. Five connector variants, 9 through 50 contacts. Professional quality connectors to IEC 807-3, Performance Level Two. DENSI-D CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . 20-28 DD Series. Removable contact, five ampere nominal rating. Solder cup, crimp and straight and 90 printed board contact terminations. Six connector variants, 15 through 104 contacts. Military quality connectors qualified to MIL-DTL-24308 and MIL-C-39029. LOW COST HIGH DENSITY CONNECTORS . . . . . . . . 29-37 ODD Series. Removable contact, five ampere nominal rating. Solder cup, crimp and straight and 90 printed board contact terminations. Six connector variants, 15 through 104 contacts. Professional quality connectors. LOW COST STANDARD DENSITY CONNECTORS . . . 38-41 ORD Series. Removable contact, 7.5 ampere nominal rating. Crimp contact terminations. Six connector variants, 9 through 50 contacts. Professional quality connectors. RHAPSO-D CONNECTORS . . . . . . . . . . . . . . . . . . . . . 42-46 RD Series. Removable contact, 7.5 ampere nominal rating. Crimp contact terminations. Six connector variants, 9 through 50 contacts. Military quality connectors qualified to MIL-DTL-24308 and MIL-C39029. IEC 807-3, Performance Level One. HARMO-D CONNECTORS . . . . . . . . . . . . . . . . . . . . . . 47-52 HDC Series. Fixed contact, 7.5 ampere nominal rating. Solder cup, wrap post and straight and 90 printed board contact terminations. Five connector variants, 9 through 50 contacts. Military quality connectors qualified to MIL-DTL-24308, IEC 807-2, Performance Level One. PRESS-FIT CONNECTORS . . . . . . . . . . . . . . . . . . . . . 53-57 PCD Series. Machined contact, compliant termination, repairable, 7.5 ampere nominal rating. Five connector variants, 9 through 50 contacts. Professional quality connectors, conform to IEC 807-2, Performance Level Two. HIGH DENSITY PRESS-FIT CONNECTORS. . . . . . . . . 58-62 PCDD Series. Machined contact, compliant termination, repairable, 5 ampere nominal rating. Five connector variants, 15 through 104 contacts. Professional quality connectors. MIL-DTL-24308, MIL-C-39029 and MIL-C-85049 QUALIFIED PRODUCTS LISTING . . . . . . . . . . . . . . . 63-67 MATED CONNECTOR ASSEMBLIES EXPLODED VIEWS OF TYPICAL MATED SUBMINIATURE-D CONNECTOR ASSEMBLIES DD62M000E6X DD62F0S50T6X RD25M10LVL0 M85049/48-1-3 HDC25F5R7NV30 M24308/25-6 M24308/4-3F M24308/26-1 M24308/23-39F DD44M0000X-759.1 DD44F3S000-759.0 1 MATED CONNECTOR ASSEMBLIES EXPLODED VIEWS OF TYPICAL MATED SUBMINIATURE-D CONNECTOR ASSEMBLIES SD9M00Z0Z MD9F5R80TX CONNECTOR COMPONENT DESCRIPTION AND TERMINOLOGY A-1 - A-2 - B-1 - B-2 - C-1 - C-2 - C-3 - C-4 - C-5 - C-6 - C-7 - C-8 - Male and female signal contacts, size 22. Terminations may be crimp, solder cup and printed board mount. Male and female signal contacts, size 20. Terminations may be crimp, solder cup, wrap post, press-fit and printed board mount. Unloaded connector insulators, male and female. Insulator retention system retains all contact termination types. Insulator may be used as a free or fixed connector. Loaded connector insulators, male and female. Insulators may be preloaded per customer requirements with contacts having terminations of 90 or straight solder printed board mount, wrap post, solder cup and press-fit. Insulator contact positions may be selectively loaded with contacts. Connectors are normally fixed panel or printed board connectors. Fixed female jackscrews are the stationary threaded members of the non-polarized jackscrew system. Fixed male and female jackscrews are the stationary threaded members of the polarized jackscrew system. Rotating male jackscrews and screwlocks are the rotating threaded members of the nonpolarized jackscrew system. Rotating male and female jackscrews are the rotating threaded members of the polarized jackscrew system. Vibration locking system consists of lock tabs on fixed connector and slide lock lever on free cable connector. Blind mating connector system with pilot probes on free connector and receptacle guides on panel mounted fixed connector. Cable adapters (Hoods) are used on the free cable connector to provide cable support and contact protection. Knobs of the polarized rotating jackscrew system are affixed to the rotating jackscrew by a set screw. 2 Melo-D/Euro-D PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Series Size 20 Contacts, Fixed Professional Quality Connectors IEC Publication 807-2 Performance Level Two U.L. Recognized File #E49351 CSA Recognized File #LR54219 Telecommunication U.L. File #14098 Melo-D and Euro-D Series connectors are professional quality connectors recommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. These fixed contact connectors meet the dimensional and performance requirements of IEC 807-2, Performance Level Two. Melo-D and Euro-D Series connectors utilize precision machined contacts which are fixed within the connector body. The female contact is an open entry design contact, precision machined of high tensile phosphor bronze. Six standard connector variants are offered in arrangements of 9, 15, 25, 29, 37 and 50 contacts. Each Melo-D connector variant is available with contact terminations for solder cup, wrap post, and straight and 90 printed board mount termina- tions featuring a choice of three printed board footprints. Each Euro-D connector variant is available with contact terminations for solder cup, wrap post and straight and 90 printed board mount terminations per standard European metric footprints. Melo-D and Euro-D Series connectors are mateable and compatible with all D-Subminiature connectors conforming to IEC 807-2 and MIL-DTL-24308. A wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. Melo-D and Euro-D Series connectors conform to EIA RS 232 and RS 449, and CCITT X.24 interface connector requirements. MELO-D/EURO-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Contacts: Fixed Contacts: Contact Plating: Shells: Nylon resin, UL 94V-0, black color. Male contacts - precision machined brass alloy. Female contacts - precision machined high tensile phosphor bronze. Professional performance Gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate; zinc plate with dichromate seal. Contact Retention In Insulator: Resistance To Solder IronHeat: Melo-D Contact Terminations: Mounting Spacers and Brackets: Nylon plastic, or brass with tin plate; zinc plate with dichromate seal. Push-On Fasteners: Phosphor bronze or beryllium copper with tin plate. Jackscrew Systems: Steel with zinc plate and dichromate seal, or clear zinc plate. Vibration Lock Systems: Slide lock and lock tabs, steel with nickel plate. Hoods: Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Insulator Resistance: Proof Voltage: Clearance and Creepage Distance (minimum): Working Voltage: 7.5 amperes nominal. 0.008 ohms maximum. 5 G ohms. 1000 V r.m.s. 0.039 inch (1.0mm). 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: 3 -55C to +125C. 10 days. Euro-D Contact Terminations: Size 20 contact, male contact - 0.040 inch (1.02mm) diameter. Female contact rugged open entry design. 6 lbs. (27N) 500F (260C) for 10 seconds duration per IEC 512-6. Solder cup contacts - 0.042 inch (1.06mm) minimum hole diameter for 20 AWG (0.5mm 2) wire maximum. Straight Printed Board Mount - 0.028 inch (0.71mm) diameter. 90 Printed Board Mount - 0.028 inch (0.71mm) diameter for all printed board footprints. Wrap Post - 0.025 inch (0.64mm) square. Solder cup contacts - 0.042 inch (1.06mm) minimum hole diameter for 20 AWG (0.5mm 2) wire maximum. Straight Printed Board Mount - 0.024 inch (0.60mm) diameter. 90 Printed Board Mount - 0.024 inch (0.60mm) diameter for European Metric Footprints. Shells: Male shells may be dimpled for EMI/ESD ground paths. Polarization: Trapezoidally shaped shells and polarized jackscrews. Mounting To Angle Brackets: Jackscrews and riveted fasteners with a 0.120 inch (3.05mm) clearance hole, and threaded riveted fasteners with 4-40 threads and nylon lock inserts. Mounting To Printed Board:Rapid installation push-on fasteners and threaded posts. Locking Systems: Jackscrews and vibration locking systems. Mechanical Operations: 500 operations minimum per IEC 512-5. PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE SIZE 9 SIZE 15 SIZE 29 SIZE 25 SIZE 37 SIZE 50 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 E D1 D H C 0.036 (0.91) 0.008 A 10 Typ. G 0.220 (5.59) Max. 0.120 (3.05) 0.005 O Mounting hole, two places 0.120 (3.05) 0.010 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available OPTIONAL SHELLASSEMBLY CONNECTOR VARIANT SIZES A 0.015 9M 1.213 (30.81) 9F 1.213 (30.81) 15 M 1.541 (39.14) 15 F 1.541 (39.14) 25 M 2.088 (53.04) 25 F 2.088 (53.04) 29 M 1.770 (44.96) 29 F 1.770 (44.96) 37 M 2.729 (69.32) 37 F 2.729 (69.32) 50 M 2.635 (66.93) 50 F 2.635 (66.93) B 0.005 OPTIONAL SHELLASSEMBLY WITH UNIVERSAL FLOAT MOUNTS B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.643 (16.33) 0.984 (24.99) 0.994 (25.25) 0.971 (24.66) 1.511 (38.38) 1.251 (31.78) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.759 (19.28) 0.422 (10.72) 0.233 (5.92) 0.422 (10.72) 0.494 (12.55) 0.759 (19.28) 0.422 (10.72) 0.243 (6.17) 0.429 (10.90) 0.494 (12.55) 1.083 (27.51) 0.422 (10.72) 0.233 (5.92) 0.422 (10.72) 0.494 (12.55) 1.083 (27.51) 0.422 (10.72) 0.243 (6.17) 0.429 (10.90) 0.494 (12.55) 1.625 (41.28) 0.422 (10.72) 0.230 (5.84) 0.426 (10.82) 0.494 (12.55) 1.625 (41.28) 0.422 (10.72) 0.243 (6.17) 0.429 (10.90) 0.605 (15.37) 1.322 (33.58) 0.539 (13.69) 0.217 (5.51) 0.426 (10.82) 0.605 (15.37) 1.322 (33.58) 0.539 (13.69) 0.237 (6.02) 0.429 (10.90) 0.494 (12.55) 2.272 (57.71) 0.422 (10.72) 0.230 (5.84) 0.426 (10.82) 0.494 (12.55) 2.272 (57.71) 0.422 (10.72) 0.243 (6.17) 0.429 (10.90) 0.605 (15.37) 2.178 (55.32) 0.534 (13.56) 0.230 (5.84) 0.426 (10.82) 0.605 (15.37) 2.178 (55.32) 0.534 (13.56) 0.243 (6.17) 0.429 (10.90) 0.329 (8.36) 0.311 (7.90) 0.450 (11.43) 0.431 (10.95) 0.329 (8.36) 0.311 (7.90) 2.406 (61.11) 2.406 (61.11) G 0.010 0.311 (7.90) 2.500 (63.50) 2.500 (63.50) E 0.015 0.329 (8.36) 1.534 (38.96) 1.534 (38.96) D1 0.005 0.311 (7.90) 1.852 (47.04) 1.852 (47.04) 1.274 (32.36) D 0.005 1.312 (33.32) 1.312 (33.32) 1.534 (38.96) 2.064 (52.43) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places 0.032 (0.81) Total diametral float 0.441 (11.20) 0.423 (10.74) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 4 PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS SOLDER CUP CONNECTOR Fixed female jackscrews 20 AWG, Max. (0.5 mm 2) 0.135 (3.43) Fixed female jackscrew For solder cup contacts, specify code 2 in step 4 of ordering information. 0.352 (8.94) Fixed male jackscrew Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: MD15M200T6Z Typical Part Number: ED15M200T2Z STRAIGHT PRINTED BOARD MOUNT CONNECTOR CODE NUMBER L DO 3 0.150 (3.81) 0.028 (0.71) 32 0.375 (9.53) 0.028 (0.71) 36 0.236 (5.99) 0.024 (0.61) Fixed female jackscrews Swaged spacer with push-on fastener, phosphor bronze 0.010 (0.25) Min. 0.225 (5.72) L For straight printed board mount contacts, specify code number in step 4 of ordering information. DO TypicalPartNumber: MD25F3S60T0 FERRITE INDUCTOR BAR FOR EMI/RFI NOISE SUPPRESSION FILTERING CHARACTERISTICS Fixed female jackscrews Swaged spacer with push-on fastener phosphor bronze. 0.010 (0.25) Min. SERIES IMPEDANCE ATTENUATION* FREQUENCY *NO-LOAD CONDITION MD MD MD MD ED ED DD ODD ODD HDC HDC HDC CODE NO. 32 4 59 6 36 6 32 32 5 32 36 6 A 0.375 (9.53) ----------0.375 (9.53) 0.375 (9.53) 0.375 (9.53) 0.515 (13.08) 0.375 (9.53) -----0.375 (9.53) 0.375 (9.53) 0.375 (9.53) A L 0.240 (6.10) ----------0.360 (9.14) 0.101 (2.57) 0.360 (9.14) 0.165 (4.19) 0.165 (4.19) -----0.240 (6.10) 0.101 (2.57) 0.360 (9.14) L Ferrite inductor bar STRAIGHT PRINTED BOARD MOUNT CONNECTOR 0.005 Ferrite inductor bar 0.135 (3.43) MATERIAL: NICKELZINC CERAMIC. Specify code F or Q in step 6 of ordering information. F for ferrite inductor and Q for ferrite inductor with push-on fastener. 90 PRINTED BOARD MOUNT CONNECTOR WRAP POST CONNECTOR Fixed female jackscrews 0.025 Sq. (0.64) For wrap post contacts, specify code 6 in step 4 of ordering information. 0.720 (18.29) 0.495 (12.57) Typical Part Number: MD15F600T20 MD25M6S50T0 5 DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONNECTOR CODE 5, 0.283 (7.19) CONTACT EXTENSION C MD005R4000 0.283 (7.19) CONTACT EXTENSION PART NUMBER 0.008 B Fixed female jackscrews B C D MD905R4000 1.204 0.984 (30.58) (24.99) 0.339 (8.61) 0.283 (7.19) MD1505R4000 1.532 1.312 (38.91) (33.32) 0.339 (8.61) 0.283 (7.19) MD2505R4000 2.072 1.852 (52.63) (47.04) 0.339 (8.61) 0.283 (7.19) MD2905R4000 1.754 1.534 0.395 (44.55) (38.96) (10.03) 0.283 (7.19) MD3705R4000 2.720 2.500 (69.09) (63.50) 0.339 (8.61) 0.283 (7.19) MD5005R4000 2.626 2.406 0.395 (66.70) (61.11) (10.03) 0.283 (7.19) A Specify code 5 in step 4 of ordering information. A PLASTIC MOUNTING BRACKET AVAILABLE Specify code B7 or B8 in step 5 of ordering information. 0.060 (1.52) R. 0.240 (6.10) 0.090 (2.29) 0.120 (3.05) O 0.123 (3.12) 0.149 (3.78) 0.112 (2.84) Typ. 0.112 (2.84) Typ. D 0.112 (2.84) Typ. Numbering shown is rear view of male and face view of female. Typical Part Number: MD25M5R4NT2X D 0.028 (0.71) O Typical Part Number: MD50M5R4NT2X Push-on fastener beryllium copper 0.160 (4.06) Nominal 90 PRINTED BOARD MOUNT CONNECTOR 0.125 (3.18) X 0.233 (5.92) Oval hole typ. CODE 59, 0.545 (13.84) CONTACT EXTENSION MD0059B000 0.545 (13.84) CONTACT EXTENSION PART NUMBER MD9059B000 0.008 B A Fixed female jackscrews MD15059B000 MD25059B000 MD29059B000 MD37059B000 MD50059B000 C E Specify code 59 in step 4 of ordering information. A B C D E 1.204 (30.58) 1.532 (38.91) 2.072 (52.63) 1.754 (44.55) 2.720 (69.09) 2.626 (66.70) 0.984 (24.99) 1.312 (33.32) 1.852 (47.04) 1.534 (38.96) 2.500 (63.50) 2.406 (61.11) 0.275 (6.99) 0.275 (6.99) 0.275 (6.99) 0.275 (6.99) 0.275 (6.99) 0.275 (6.99) 0.545 (13.84) 0.545 (13.84) 0.545 (13.84) 0.545 (13.84) 0.545 (13.84) 0.545 (13.84) 0.601 (15.27) 0.601 (15.27) 0.601 (15.27) 0.657 (16.69) 0.601 (15.27) 0.657 (16.69) Numbering shown is rear view of male and face view of female. D 0.112 (2.84) Typ. 0.112 (2.84) Typ. D 0.112 (2.84) Typ. Typical Part Number: MD25M59B0T2X 0.125 (3.18) Nominal 0.028 (0.71) O DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. Typical Part Number: MD29M59B0T2X 6 PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONNECTOR CODE 4, 0.450 (11.43) CONTACT EXTENSION 0.125 (3.18) O Typ. C MD004B000 0.450 (11.43) CONTACT EXTENSION PART NUMBER Fixed female jackscrews 0.008 B A C D MD904B000 MD1504B000 1.532 1.312 0.506 0.450 (38.91) (33.32) (12.85) (11.43) MD2504B000 2.072 1.852 0.506 0.450 (52.63) (47.04) (12.85) (11.43) MD2904B000 1.754 1.534 0.562 0.450 (44.55) (38.96) (14.27) (11.43) MD3704B000 2.720 2.500 0.506 0.450 (69.09) (63.50) (12.85) (11.43) MD5004B000 2.626 2.406 0.562 0.450 (66.70) (61.11) (14.27) (11.43) A Specify code 4 in step 4 of ordering information. B 1.204 0.984 0.506 0.450 (30.58) (24.99) (12.85) (11.43) PLASTIC MOUNTING BRACKET AVAILABLE Specify code B7 or B8 in step 5 of ordering information. 0.277 (7.04) 0.094 (2.39) O 0.240 (6.10) 0.060 (1.52) R. 0.112 (2.84) 0.120 (3.05) O 0.123 (3.12) 0.149 (3.78) 0.112 (2.84) Typ. 0.112 (2.84) Typ. D Numbering shown is rear view of male and face view of female. D 0.112 (2.84) Typ. Typical Part Number: MD25M4B0T20 0.028 (0.71) O Typical Part Number: MD50M4B0T20 0.160 (4.06) Nominal 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Hole identification shown for male connector, use mirror image for female connector. Mount connector with mating face positioned to follow direction of arrow. Sym. Sym. 0.216 (5.49) 0.492 (12.50) 0.108 Typ. (2.74) 0.112 0.162 (2.84) (4.11) 0.054 Typ. (1.37) 0.656 (16.66) 0.108 Typ. (2.74) 0.054 Typ. (1.37) 0.112 (2.84) 0.652 (16.56) 0.112 (2.84) 0.598 (15.19) MD25 Sym. Sym. 0.432 (10.97) 0.486 (12.34) 0.055 Typ. (1.40) MD15 Sym. 0.224 (5.69) 0.926 (23.52) 0.109 Typ. (2.77) 0.054 Typ. (1.37) 0.112 (2.84) 0.324 (8.23) MD9 0.767 (19.48) 0.108 Typ. (2.74) Sym. 0.378 (9.60) 1.250 (31.75) 0.109 Typ. (2.77) 0.112 (2.84) 0.055 Typ. (1.40) MD29 0.978 (24.84) 0.924 (23.47) MD37 1.203 (30.56) 0.109 Typ. (2.77) 0.224 (5.69) 0.112 (2.84) 0.055 Typ. (1.40) 0.870 (22.10) 0.815 (20.70) MD50 Suggest 0.045 (1.14) O hole for contact termination positions. Suggest 0.123 0.003 (3.12) O hole for mounting connector with push-on fasteners. 7 DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS WITH METRIC DIMENSIONED TERMINATIONS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONNECTOR 0.125 (3.18) O Typ. C PLASTIC MOUNTING BRACKET AVAILABLE Specify code B7 or B8 in step 5 of ordering information. 0.060 (1.52) R. 0.240 (6.10) 0.090 (2.29) 0.120 (3.05) O 0.123 CODE 42 AND 52, 0.370 (9.40) CONTACT EXTENSION ED00*B000 0.370 (9.40) CONTACT EXTENSION PART NUMBER 0.008 B Fixed female jackscrews A Specify code 42 or 52 in step 4 of ordering information. B C D ED90*B000 0.370 (9.40) ED150*B000 1.532 1.312 0.420 (38.91) (33.32) (10.67) 0.370 (9.40) ED250*B000 2.072 1.852 0.420 (52.63) (47.04) (10.67) 0.370 (9.40) ED290*B000 1.754 1.534 0.470 (44.55) (38.96) (11.94) 0.370 (9.40) ED370*B000 2.720 2.500 0.420 (69.09) (63.50) (10.67) 0.370 (9.40) ED500*B000 2.626 2.406 0.470 (66.70) (61.11) (11.94) 0.370 (9.40) (3.12) 0.149 (3.78) 0.100 (2.54) Typ. for code 42 contacts 0.112 (2.84) Typ. for code 52 contacts 0.100 (2.54) Typ. for code 42 contacts 0.112 (2.84) Typ. for code 52 contacts D Numbering shown is rear view of male and face view of female. D 0.100 (2.54) Typ. for code 42 contacts 0.112 (2.84) Typ. for code 52 contacts A 1.204 0.984 0.420 (30.58) (24.99) (10.67) Typical Part Number: ED25M42B0T2X 0.024 (0.61) O Typical Part Number: ED50M52B0T2X 0.197 (5.00) Max. 90 PRINTED BOARD MOUNT CONNECTOR CODE 44, 0.370 (9.40) CONTACT EXTENSION ED0044B000 0.370 (9.40) CONTACT EXTENSION PART NUMBER 0.008 B Fixed female jackscrews Specify code 44 in step 4 of ordering information. 0.100 (2.54) Typ. D C D ED9044B000 ED15044B000 1.532 1.312 0.420 (38.91) (33.32) (10.67) 0.370 (9.40) ED25044B000 2.072 1.852 0.420 (52.63) (47.04) (10.67) 0.370 (9.40) ED29044B000 1.754 1.534 0.470 (44.55) (38.96) (11.94) 0.370 (9.40) ED37044B000 2.720 2.500 0.420 (69.09) (63.50) (10.67) 0.370 (9.40) ED50044B000 2.626 2.406 0.470 (66.70) (61.11) (11.94) 0.370 (9.40) Push-on fastener, beryllium copper. Typical Part Number: ED25M44BNT2X B 0.370 (9.40) A C A 1.204 0.984 0.420 (30.58) (24.99) (10.67) 0.024 (0.60) O Numbering shown is rear view of male and face view of female. 0.197 (5.00) Max. PLASTIC MOUNTING BRACKET AVAILABLE Specify code B7 or B8 in step 5 of ordering information. 0.060 (1.52) R. 0.240 (6.10) 0.090 (2.29) 0.120 (3.05) O 0.123 (3.12) 0.149 (3.78) 0.100 (2.54) Typ. 0.100 (2.54) Typ. D Typical Part Number: ED29M44BNT2X DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 8 PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS WITH METRIC DIMENSIONED TERMINATIONS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Hole identification shown for male connector, use mirror image for female connector. For code 42 and 52 contacts, mount connector with mating face positioned to follow direction of arrow. For code 44 contacts, mount connector with mating face positioned to oppose direction of arrow. Sym. 0.492 (12.50) 0.656 (16.66) 0.216 (5.49) 0.378 (9.60) X 0.108 Typ. (2.74) 0.162 (4.11) ED15 0.432 (10.97) 1.250 (31.75) 0.108 Typ. (2.74) 0.112 (2.84) 0.598 (15.19) ED25 Sym. X 0.486 (12.34) 0.055 Typ. (1.40) 0.924 (23.47) CODE NUMBER X Y 36 0.112 (2.84) 0.224 (5.69) 42 0.100 (2.54) 0.200 (5.08) 44 0.100 (2.54) 0.200 (5.08) 52 0.112 (2.84) 0.224 (5.69) 0.870 (22.10) 0.109 Typ. (2.77) Y ED37 ED29 1.203 (30.56) 0.978 (24.84) 0.109 Typ. (2.77) X 0.652 (16.56) Sym. Sym. 0.054 Typ. (1.37) 0.055 Typ. (1.40) 0.324 (8.23) ED9 Y 0.926 (23.52) 0.109 Typ. (2.77) 0.054 Typ. (1.37) 0.108 Typ. (2.74) X 0.054 Typ. (1.37) 0.767 (19.48) Sym. Sym. X 0.055 Typ. (1.40) 0.815 (20.70) ED50 Suggest 0.040 (1.02) O hole for contact termination positions. Suggest 0.123 0.003 (3.12) O hole for mounting connector with push-on fasteners. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 9 PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS MD/ED Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM MELO-D SERIES STEP 1 2 3 4 MD 25 F 59 R7 5 6 7 8 N T6 X 9 STEP 9 - Special Options Consult Sales Department. STEP 1 - Basic Series MD Series STEP 8 - Shell Options STEP 2 MD Series Connector Variants 0 - Zinc Plated, with Dichromate Seal. X - Tin Plated. Z - Tin Plated and Dimpled. 9, 15, 25, 29, 37, 50 *STEP 7 - Locking and Polarizing Systems STEP 3 - Connector Gender 0 V3 V5 VL T T2 T6 None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. E - Rotating Male Jackscrews. E2 - Rotating Male Screw Locks. E6 - Rotating Male and Female Polarized Jackscrews. M - Male F - Female STEP 4 - Type of Contacts 2 - Solder cup. 3 - Solder, Straight Printed Board Mount with 0.150 (3.81) Tail Length. 32 - Solder, Straight Printed Board Mount with 0.375 (9.52) Tail Length. 4 - Solder, 90 Printed Board Mount with 0.450 (11.43) Contact Extension. 5 - Solder, 90 Printed Board Mount with 0.283 (7.19) Contact Extension. 59 - Solder, 90 Printed Board Mount with 0.545 (13.84) Contact Extension. 6 - Wrap Post. *STEP 5 - Mounting Style 0 - Mounting Hole, 0.120 (3.05) O. B - Bracket, Mounting, 90 Metal. B3 - Bracket, Mounting, 90 Metal with Cross Bar. B7 - Bracket, Mounting, 90 Plastic. B8 - Bracket, Mounting, 90 Plastic with Cross Bar. F - Float Mounts, Universal. P - Threaded Post, Brass, 0.225 (5.71) Length. P2 - Threaded Post, Nylon, 0.225 (5.71) Length. R - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews. R2 - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bar. R3 - Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3.05) O Mounting Hole. R4 - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads. R5 - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut. R6 - Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3.05) O Mounting Hole with Cross Bar. R7 - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads with Cross Bar. R8 - Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut with Cross Bar. S - Swaged Spacer, 4-40 Threads, 0.225 (5.71) Length. S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. S5 - Swaged Locknut, 4-40 Threads. S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225 (5.71) Length. S7 - Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, 0.375 (9.53) Length. *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. **Ferrite inductor is available on contact types 32, 4, 59 and 6 only. - - - - - - - Specify Complete Connector By Following Steps 1 through 9 Insert "0" When Step Is Not Used *STEP 6 - Hoods and Push-On Fasteners 0 J L Y - - - - Y6 - Z - H G W N **F **Q - - - - - - None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 50 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 50 only. Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews. Available in size 9, 15, 25, 37, and 50 only. Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only. Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50 only. Hood, Top or Side Opening, Plastic. Available in size 9, 15, and 25 only. Push-on Fastener, for 90 Mounting Brackets. Ferrite inductor. Ferrite inductor for use with Push-on Fastener and 90 Mounting Brackets. EURO-D SERIES STEP 2 3 4 ED 25 1 F 42 R7 STEP 1 - Basic Series ED Series STEP 2 ED Series Connector Variants 9, 15, 25, 29, 37, 50 STEP 3 - Connector Gender M - Male F - Female STEP 4 - Type of Contacts 2 - Solder cup. 36 - Solder, Straight Printed Board Mount with 0.236 (5.99) Tail Length. 42 - Solder, 90 Printed Board Mount with 0.370 (9.40) Contact Extension. 44 - Solder, Inverted 90 Printed Board Mount with 0.370 (9.40) Contact Extension. 52 - Solder, 90 Printed Board Mount with 0.370 (9.40) Contact Extension. *STEP 5 - Mounting Style 5 6 7 8 N T2 0 9 STEP 9 - Special Options Consult Sales Department STEP 8 - Shell Options 0 - Zinc Plated, with Dichromate Seal. X - Tin Plated. Z - Tin Plated and Dimpled. *STEP 7 - Locking and Polarizing Systems Refer to MD Series Step 7 *STEP 6 - Hoods and Push-On Fasteners Refer to MD Series Step 6 *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. **Ferrite inductor is available on contact types 36 only. Refer to MD Series Step 5 10 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS Soli-D Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Size 20 Contacts, Removable Professional Quality Connectors IEC Publication 807-3 Performance Level Two U.L. Recognized File #E49351 CSA Recognized File #LR54219 Telecommunication U.L. File #14098 Soli-D Series connectors are professional quality connectors recommended for use in sheltered, non-corrosive indoor or outdoor environments having normal ventilation, but without temperature or humidity controls. This crimp removable contact connector will meet the Performance Level Two requirements of IEC 807-3. Soli-D Series connectors utilize precision machined contacts with closed barrel, crimp terminations. The female contact features the Robi-Contact open entry design. Other contact terminations such as solder cup and printed board terminations are also available. The removable contact feature provides for rapid assembly and permits contact repairs on wiring changes. Five standard contact variants are offered in arrangements of 9, 15, 25, 37 and 50 contacts. Soli-D Series connectors are mateable and compatible with all D-Subminiature connectors conforming to IEC 807-2, IEC 807-3 and MIL-DTL-24308. A wide assortment of cable support hoods and locking systems is available from stock. Soli-D Series connectors conform to EIA RS 232 and RS 449, and CCITT X.24 interface connection requirements. SOLI-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Removable Contacts: Contacts: Contact Plating: Shells: Mounting Spacers: Push-On Fasteners: Jackscrew Systems: Vibration Lock Systems: Hoods: Glass filled nylon resin, UL 94V-0, black color. Male contacts - precision machined brass alloy. Female contacts - precision machined high tensile phosphor bronze. Professional performance - gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate; zinc plate with dichromate seal. Nylon plastic, or brass, zinc plate with dichromate seal. Phosphor bronze with tin plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Slide lock and lock tabs, steel with nickel plate. Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial ContactResistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: 7.5 amperes nominal. 0.008 ohms maximum. 1000 V r.m.s. 5 G ohms. 0.039 inch (1.0mm). 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: 11 -55C to +125C. 10 days. Contact Retention In Insulator: Contact Terminations: Shells: Polarization: Printed Board Mount: Locking Systems: Mechanical Operations: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 contacts, male - 0.040 inch (1.02mm) diameter; female - Robi-D contact open entry design. 6 lbs. (27 N). Closed barrel crimp, wire sizes 18 AWG (1.0mm2) through 32 AWG (0.03mm2). Also, solder cup and straight printed board mount terminations. Male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Rapid installation push-on fasteners. Jackscrews and vibration locking systems. 500 operations minimum per IEC 512-5. PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE SD 9 SD 15 SD 25 SD 37 SD 50 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 E D1 D H 0.437 (11.10) Max. C 0.120 (3.05) 0.005 O Mounting hole, two places 0.036 (0.91) 0.008 A 10 Typ. G 0.120 (3.05) 0.010 0.032 (0.81) Total diametral float 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available OPTIONAL SHELLASSEMBLY WITH UNIVERSALFLOAT MOUNTS OPTIONALSHELLASSEMBLY CONNECTOR VARIANT SIZES SD 9 M SD 9 F SD 15 M SD 15 F SD 25 M SD25 F SD 37 M SD37 F SD50 M SD50 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) B 0.005 B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 12 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT MALE CONTACT CO CO A A 0.040 O (1.02) BO BO 0.170 (4.32) 0.170 (4.32) PART NUMBER WIRE SIZE AWG/(mm2) A BO CO PART NUMBER WIRE SIZE AWG/(mm2 ) A BO CO FC7520D 20 / 22 / 24 (0.5/0.3/0.25) 0.612 (15.54) 0.045 (1.14) 0.066 (1.68) MC7520D 20 / 22 / 24 (0.5/0.3/0.25) 0.618 (15.70) 0.045 (1.14) 0.066 (1.68) FC7526D 26 / 28 / 30 (0.12/0.08/0.05) 0.612 (15.54) 0.026 (0.66) 0.066 (1.68) MC7526D 26 / 28 / 30 (0.12/0.08/0.05) 0.618 (15.70) 0.026 (0.66) 0.066 (1.68) Crimp contacts must be ordered separately. 0.086 O (2.18) FEMALE CONTACT MALE CONTACT 18 AWG (1.0 mm 2) max. 18 AWG (1.0 mm 2) max. 0.927 (23.55) 0.915 (23.25) 0.170 (4.32) 0.040 O (1.02) 0.055 O (1.40) 0.170 (4.32) 0.055 O (1.40) 0.086 O (2.18) FC7518D MC7518D Material - Phosphor bronze. Material - Brass. Plating - Gold flash over nickel. Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter "R" after the contact part number, such as MC7526DR for a male contact and FC7520DR for a female contact. Enlarged section of plastic contact carriers DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 13 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS STRAIGHT PRINTED BOARD MOUNT CONTACTS FEMALE CONTACT MALE CONTACT A A 0.040 O (1.02) DO DO Straight printed board mount contacts are supplied in connector. CODE NUMBER L DO A CODE NUMBER L DO A 3 0.125 (3.18) 0.024 (0.61) 0.772 (19.61) 3 0.125 (3.18) 0.024 (0.61) 0.768 (19.51) 32 0.188 (4.78) 0.024 (0.61) 0.835 (21.21) 32 0.188 (4.78) 0.024 (0.61) 0.831 (21.11) For straight printed board mount contacts specify code no. in step 4 of ordering information. Swaged spacer with push-on fastener phosphor bronze. Fixed female jackscrews 0.437 (11.10) L Nominal DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. Typical Part Number: SD37F3S60T2X Material - Phosphor bronze or brass. Plating - Gold flash over nickel. 14 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Hole identification shown for male connector, use mirror image for female connector. Sym. 0.216 (5.49) 0.492 (12.50) 0.656 (16.66) 0.108 Typ. (2.74) 0.112 (2.84) 0.162 (4.11) 0.054 Typ. (1.37) Sym. Sym. 0.108 Typ. (2.74) SD9 0.378 (9.60) 0.054 Typ. (1.37) 0.112 (2.84) 0.926 (23.52) 0.109 Typ. (2.77) 0.055 Typ. (1.40) 0.324 (8.23) SD15 0.598 (15.19) Sym. 0.978 (24.84) 0.112 (2.84) 0.109 Typ. (2.77) 0.112 (2.84) 0.055 Typ. (1.40) 0.112 (2.84) SD25 Sym. 1.250 (31.75) 0.652 (16.56) 0.924 (23.47) SD37 0.224 (5.69) 1.203 (30.56) 0.870 (22.10) 0.109 Typ. (2.77) 0.055 Typ. (1.40) 0.815 (20.70) SD50 Suggest 0.045 (1.14) O hole for contact termination positions. Suggest 0.123 0.003 (3.12) O hole for mounting connector with push-on fasteners. SD37M3S600Z SD25F3S600X DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 15 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMPING INFORMATION FOR RD AND SD SERIES CRIMP CONTACTS USE INDICATED POSITRONIC TOOLS FOR BEST RESULTS Step 1: Strip wire to indicated length. Insulation Take Care Not To: - Damage or remove strands. Untwist or overtwist strands. Leave insulation particles on strands. Damage insulation. 0.020 0.160 (4.06) Stranded Wire Correctly Stripped Wire Strands damaged or removed by stripping tool. Strands overtwisted. Particles of insulation on the stripped part of the wire. Insulation cut incorrectly. Wire insulation damaged. Strands untwisted. Examples of Stripping Faults Step 2: Crimp wire to contact. For Hand Crimp Tool: - Place contact into crimping tool. - Insert wire into contact. - Center contact by slowly closing the crimping tool until the crimp indenters make contact with the crimp barrel. - Complete the cycle of the crimping tool in one smooth motion. - Remove the crimped contact. For Automatic Feed Pneumatic Crimp Tool: - Insert the wire into the contact, positioned in the crimp tool by the plastic carrier. - Depress the activating device of the crimping tool to start the crimping cycle. - Remove the crimped contact. 16 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMPING INFORMATION FOR RD AND SD CRIMP CONTACTS Step 3: Inspect the crimp. For All Tools: - Strands to be visible through the inspection hole. - Strands not to be visible beyond the insulation support. - Crimped contact to meet recommended conductor tensile Crimp to meet recommended force shown in chart. tensile strength. - Check for peeled gold and bent contacts. Wire Insulation, Typical Cross Section of Correctly Crimped Contact Correctly Crimped Contact Stripped wires compressed for improved conduction. Strands visible beyond insulation support. 8 Crimp Indents Strands not visible through inspection hole. Crimp indents too close to inspection hole. Positronic Recommended Conductor Tensile Strength Stripped part of the wire too long. Stripped part of the wire too short. Crimp indents incorrectly located. Examples of Crimping Faults WIRE SIZE AWG/(mm2 ) AXIALLOAD POUNDS/(N) 18 (1.0) 28 (125) 20 (0.5) 20 (89) 22 (0.3) 12 (53) 24 (0.25) 8 (36) 26 (0.12) 5 (22) 28 (0.08) 3 (13) 30 (0.05) 1.5 (6.7) Positronic recommended tools for SD series contacts. For more information see contact crimp tools and accessories page. CRIMP TOOLS POSITIONERS FOR FC7520D, FC7526D, MC7520D, MC7526D POSITIONERS FOR FC7518D, MC7518D, FC6018D, MC6018D 9507, HAND CRIMP TOOL 9502-10 9502-11 9550-1, AUTOMATIC FEED PNEUMATIC CRIMP TOOL Supplied in reels Not Available Conductor tensile strength values are derived using silver-tin plated copper wires. Values may change depending upon what type of wire is used. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 17 PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS SD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9. Insert "0" When Step Is Not Used. STEP 1 2 3 4 5 6 7 8 SD 25 F 3 S6 0 T6 X 9 STEP 1 - Basic Series STEP 9 - Special Options SDSeries Consult Sales Department. STEP 2 - SD Series Connector Variants STEP 8 - Shell Options 9, 15, 25, 37, 50 0 - Zinc Plated with Dichromate Seal. X - Tin Plated. Z - Tin Plated and Dimpled. STEP 3 - Connector Gender M - Male F - Female *STEP 7 - Locking and Polarizing Systems STEP 4 - Type of Contacts 0 1 12 3 32 - 0 V3 V5 VL T T2 T6 E E2 E6 Order Contacts separately. Crimp, 20 AWG-24 AWG (0.5mm2 -0.25mm2). Crimp, 26 AWG-30 (0.12mm2-0.05mm 2 ). Solder, Straight Printed Board Mount with 0.125 (3.18) Tail Length. Solder, Straight Printed Board Mount with 0.188 (4.78) Tail Length. *STEP 5 - Mounting Style 0 F P P2 S S2 S5 S6 - Mounting Hole, 0.120 (3.05) O. Float Mounts, Universal. Threaded Post, Brass, 0.437 (11.10) Length. Threaded Post, Nylon, 0.437 (11.10) Length. Swaged Spacer, 4-40 Threads, 0.437 (11.10) Length. Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. Swaged Locknut, 4-40 Threads. Swaged Spacer with Push-onFastener, 4-40 Threads, 0.437 (11.10) Length. - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods Only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male and Female Polarized Jackscrews. *STEP 6 - Hoods 0 J L Y - Y6 Z - H G W - None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Side Opening, Plastic with Rotating Male Jackscrews. Available in size 50 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 50 only. Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews. Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only. Hood, EMI/RFI, Metal. Hood, Top or Side Opening, Plastic. Available in size 9,15, and 25 only. *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. SD SERIES CRIMP CONTACT TERMINATIONS TERMINATION CONTACT TYPE SIZE WIRE SIZE AWG/(mm2) FEMALE PART MALE PART NUMBER NUMBER CRIMP 20 20 / 22 / 24 (0.5/0.3/0.25) FC7520D MC7520D CRIMP 26 26 / 28 / 30 (0.12/0.08/0.05) FC7526D MC7526D 18 SD Series PROFESSIONAL QUALITY, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS AUTOMATIC FEED CRIMP TOOL, PNEUMATICALLY ACTUATED Part No. 9550-1 This fast cycling automatic feed crimp tool produces an 8 indent crimp on wire sizes 20 AWG (0.5mm2) through 32 AWG (0.03mm2). Soli-D Series contacts must be ordered on reels. To order, specify part number 9550-1. Foot control valve is supplied as a standard accessory. MINIATURE STEP ADJUSTABLE TOOL (M22520/2-01) Part No. 9507 This miniature 8 step adjustable hand crimping tool produces an 8 indent crimp configuration and will crimp wire sizes 18 AWG (1.0mm2) through 32 AWG (0.03mm2). To crimp wire size 18 AWG (1.0mm2), order contact positioner 9502-11. To crimp wire size 20 AWG (0.5mm2) through 32 AWG (0.03mm2), order contact positioner 9502-10. Each positioner is equipped with a data plate which gives the correct crimp-depth setting for each wire size, and must be used with 9507 tool frame for best results when crimping Soli-D Series contacts. INSERTION/REMOVAL TOOL (M81969/1-02) One end of this tool is used to insert contacts into Soli-D Series connectors. The other end is used to extract contacts. This is accomplished by sliding the extraction tip down the wire into the connector until it bottoms against the contact. A slight rotation while pushing will release the contacts, which are then extracted by simultaneously pulling on the wire. 19 MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS Densi-D Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Size 22 Contacts, Removable Crimp and Printed Board Mount Military/Industrial Quality Connectors MIL-DTL-24308 and MIL-C-39029 U.L. Recognized File #E49351 CSA Recognized File #LR54219 Telecommunication U.L. File #14098 Densi-D Series connectors are Military/Industrial quality, high density rectangular connectors designed for use in sheltered, mildly corrosive environments having a wide range of temperature, pressure and humidity changes. These crimp removable contact connectors are qualified to MIL-DTL-24308 and MIL-C-39029. Densi-D Series connectors utilize precision machined contacts with closed barrel crimp terminations and solder cup terminations for straight and 90 printed board mount. All female contacts are of closed entry design, featuring a fluted stainless steel shroud. Six standard contact variants are offered in arrangements of 15, 26, 44, 62, 78 and 104 contacts. Densi-D Series connectors are mateable and compatible with other high density DSubminiature connectors conforming to MIL-DTL-24308. A wide assortment of mounting spacers, cable support hoods and locking systems is available from stock. DENSI-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulators: Removable Contacts: Contacts: Contact Plating: Shells: Mounting Spacers: Push-OnFastener: Vibration Lock Systems: Jackscrew Systems: Hoods: Glass filled polyester per MIL-M-24519, U L9 4 V-0, blue color. Male contacts - precision machined high tensile copper alloy. Female contacts - precision machined high tensile copper alloy with stainless steel shroud. Military performance - 0.000050 inch (1.25 microns) gold over copper plate. Industrial performance - gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate; zinc and cadmium plate with dichromate seal, stainless steel, passivated. Nylon plastic and brass; zinc plate with dichromate seal. Phosphor bronze or beryllium copper with tin plate. Slide lock and lock tabs, steel with nickel plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: Contact Retention In Insulator: Contact Terminations: Shells: Polarization: Mounting To Angle Brackets: Mounting To Printed Board: Locking Systems: Mechanical Operations: Insert contact to rear face of insulator and release from rear face of insulator. Size 22 contacts, male - 0.030 inch (0.76mm) diameter; female - closed entry design with stainless steel shroud. 9 lbs. (40 N). Closed barrel crimp, wire sizes 22 AWG (0.3mm2) through 30 AWG (0.05mm 2) per IEC 352-2. 90 Printed Board Mount contact terminations. Male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and riveted fasteners with 0.120 inch (3.05mm) clearance hole, and threaded riveted fasteners with 4-40 threads and nylon lock inserts. Rapid installation push-on fasteners and mounting posts. Jackscrews and vibration locking systems. 1000 operations minimum per IEC 512-5. 5 amperes nominal. 0.005 ohms maximum. 1000 V r.m.s. 5 G ohms. 0.042 inch (1.06mm). 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: -55C to +125C. 21 days. 20 MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE DD 15 DD 26 DD 62 DD 44 DD 78 DD 104 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 E D1 D H 0.375 (9.53) Max. C 0.036 (0.91) 0.008 A 10 Typ. G 0.120 (3.05) 0.005 O Mounting hole, two places 0.120 (3.05) 0.010 0.032 (0.81) Total diametral float 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available OPTIONAL SHELLASSEMBLY WITH UNIVERSAL FLOAT MOUNTS OPTIONAL SHELLASSEMBLY CONNECTOR VARIANT SIZES DD 15 M DD 15 F DD 26 M DD 26 F DD 44 M DD44 F DD 62 M DD62 F DD78 M DD78 F DD104 M DD104 F 21 A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) 2.729 (69.32) 2.729 (69.32) B 0.005 B1 0.005 0.666 (16.92) 0.643 (16.33) 0.971 (24.66) 1.511 (38.38) 2.159 (54.84) 2.064 (52.43) 2.189 (55.60) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places C 0.005 D 0.005 0.984 (24.99) 0.984 0.311 (24.99) (7.90) 0.994 1.312 (25.25) (33.32) 1.312 0.311 (33.32) (7.90) 1.534 1.852 (38.96) (47.04) 1.852 0.311 (47.04) (7.90) 2.182 2.500 (55.42) (63.50) 2.500 0.311 (63.50) (7.90) 2.079 2.406 (52.81) (61.11) 2.406 0.423 (61.11) (10.74) 2.212 2.500 (56.18) (63.50) 2.500 0.485 (63.50) (12.32) DIMENSIONS ARE IN D1 0.005 0.329 (8.36) E 0.015 G 0.010 H 0.010 K 0.005 0.494 0.759 0.422 0.233 (12.55) (19.28) (10.72) (5.92) 0.494 0.759 0.422 0.243 (12.55) (19.28) (10.72) (6.17) 0.329 0.494 1.083 0.422 0.233 (8.36) (12.55) (27.51) (10.72) (5.92) 0.494 1.083 0.422 0.243 (12.55) (27.51) (10.72) (6.17) 0.329 0.494 1.625 0.422 0.230 (8.36) (12.55) (41.28) (10.72) (5.84) 0.494 1.625 0.422 0.243 (12.55) (41.28) (10.72) (6.17) 0.329 0.494 2.272 0.422 0.230 (8.36) (12.55) (57.71) (10.72) (5.84) 0.494 2.272 0.422 0.243 (12.55) (57.71) (10.72) (6.17) 0.441 0.605 2.178 0.534 0.230 (11.20) (15.37) (55.32) (13.56) (5.84) 0.605 2.178 0.534 0.243 (15.37) (55.32) (13.56) (6.17) 0.503 0.668 2.302 0.596 0.230 (12.78) (16.97) (58.47) (15.14) (5.84) 0.668 2.302 0.596 0.243 (16.97) (58.47) (15.14) (6.17) INCHES (MILLIMETERS). ALLDIMENSIONS ARE M 0.010 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) SUBJECT TO CHANGE. MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT ("CLOSED ENTRY" DESIGN) MALE CONTACT A CO A *Color Code BO CO *Color Code 0.030 O (0.76) 0.150 (3.81) 0.150 (3.81) Stainless Steel Shroud BO Crimp contacts may be supplied kitted with connector or ordered separately. PART NUMBER WIRE SIZE AWG/(mm2 ) A BO CO PART NUMBER WIRE SIZE AWG/(mm2) A BO CO FC8022D 22 / 24 / 26 / 28 / 30 (0.3/0.25/0.12/0.08/0.05) 0.518 (13.16) 0.035 (0.89) 0.047 (1.19) MC8022D 22 / 24 / 26 / 28 / 30 (0.3/0.25/0.12/0.08/0.05) 0.531 (13.49) 0.035 (0.89) 0.047 (1.19) *M39029/57-354 22 / 24 / 26 / 28 (0.3/0.25/0.12/0.08) 0.518 (13.16) 0.035 (0.89) 0.047 (1.19) *M39029/58-360 22 / 24 / 26 / 28 (0.3/0.25/0.12/0.08) 0.531 (13.49) 0.035 (0.89) 0.047 (1.19) Material - Leaded nickel copper. Plating -Gold flash over nickel or 0.000050 inch (1.25) gold over copper for military specification contacts. Material - Brass. Plating -Gold flash over nickel or 0.000050 inch (1.25) gold over copper for military specification contacts. *Color Code -ORANGE/GREEN/YELLOW for military specification contacts. *Color Code -ORANGE/BLUE/BLACK for military specification contacts. For contact crimp tool information see page 29. SOLDER CUP CONTACTS FEMALE CONTACT ("CLOSED ENTRY" DESIGN) 0.047 O (1.19) MALE CONTACT 0.518 (13.16) 0.047 O (1.19) 0.531 (13.49) 0.030 O (0.76) 0.035 O (0.89) 0.150 (3.81) 0.150 (3.81) Stainless steel shroud Part Number: FS8022D 0.035 O (0.89) Part Number: MS8022D Material - Phosphor bronze. Material - Brass. Plating -Gold flash over nickel. Plating -Gold flash over nickel. Solder contacts may be supplied kitted with connector or ordered separately. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter "R" after the contact part number, such as MC8022DR for a male contact and FC8022DR for a female contact. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. Enlarged section of plastic contact carriers 22 MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS STRAIGHT PRINTED BOARD MOUNT CONTACTS MALE CONTACT FEMALE CONTACT ("CLOSED ENTRY" DESIGN) A A DO Stainless steel shroud 0.030 O (0.76) DO Straight printed board mount contacts are supplied in connector. CODE NUMBER L DO A CODE NUMBER L DO A 3 0.150 (3.81) 0.020 (0.51) 0.725 (18.42) 3 0.150 (3.81) 0.020 (0.51) 0.737 (18.72) 32 0.300 (7.62) 0.020 (0.51) 0.865 (21.97) 32 0.300 (7.62) 0.020 (0.51) 0.877 (22.28) For straight printed board mount contacts specify code no. in step 4 of ordering information. Fixed female jackscrews Material - Phosphor bronze. Plating - Gold flash over nickel. Swaged spacer with push-on fastener phosphor bronze. 0.375 (9.53) L Typical Part Number: DD62F3S60T2X 23 MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONNECTOR CODE 4, 0.450 (11.43) CONTACT EXTENSION PLASTIC MOUNTING BRACKET AVAILABLE C Specify code B8 in step 5 of ordering information. DD004R7000 0.450 (11.43) CONTACT EXTENSION PART NUMBER 0.008 B Fixed female jackscrews A B C D DD1504R7000 1.204 0.984 0.528 0.450 (30.58) (24.99) (13.41) (11.43) DD2604R7000 1.532 1.312 0.528 0.450 (38.91) (33.32) (13.41) (11.43) DD4404R7000 2.072 1.852 0.528 0.450 (52.63) (47.04) (13.41) (11.43) DD6204R7000 2.720 2.500 0.528 0.450 (69.09) (63.50) (13.41) (11.43) DD7804R7000 2.626 2.406 0.573 0.450 (66.70) (61.11) (14.55) (11.43) A 0.277 (7.04) 0.094 (2.39) O 0.060 (1.52) R. 0.120 (3.05) O 0.240 (6.10) 0.112 (2.84) 0.123 (3.12) 0.149 (3.78) 0.082 (2.08) Typ. 0.082 (2.08) Typ. 0.082 (2.08) Typ. Specify code 4 in step 4 of ordering information. D Numbering shown is rear view of male and face view of female. D 0.078 (1.98) Typ. 0.078 (1.98) Typ. 0.020 (0.51) O Typical Part Number: DD44F4R7NT2X 0.125 (3.18) Nominal Push-on fastener beryllium copper Typical Part Number: DD78M4R7NT2X 90 PRINTED BOARD MOUNT CONNECTOR, SIZE 104 CODE 4, 0.450 (11.43) CONTACT EXTENSION Fixed female jackscrews 0.375 (9.53) Max. 0.614 (15.60) 2.500 0.008 (63.50) Numbering shown is rear view of male and face view of female. 2.720 (69.09) Specify code 4 in step 4 of ordering information. 0.450 (11.43) 0.082 (2.08) Typ, 0.125 (3.18) Nominal Typical Part Number: DD104M4R7NT20 0.020 (0.51) O Push-on fastener beryllium copper DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 24 MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Mount connector with mating face positioned to follow direction of arrows. 0.984 (24.99) 2.500 (63.50) DD15 MALE DD62 MALE 0.190 (4.83) 0.492 (12.50) 0.973 (24.71) 1.250 (31.75) 0.078 (1.98) 0.078 (1.98) 0.090 (2.29) Typ. 0.095 (2.41) Typ. 0.984 (24.99) DD15 FEMALE 0.215 (5.46) 0.078 (1.98) 0.492 (12.50) 1.312 (33.32) DD26 MALE 2.500 (63.50) 0.380 (9.65) 0.078 (1.98) 0.656 (16.66) 0.078 (1.98) DD62 FEMALE 0.975 (24.77) 1.250 (31.75) 0.078 (1.98) 0.090 (2.29) Typ. 0.078 (1.98) 0.078 (1.98) 0.095 (2.41) Typ. 0.078 (1.98) 0.090 (2.29) Typ. 0.078 (1.98) 2.406 (61.11) DD78 MALE 1.312 (33.32) 0.903 (22.94) 1.203 (30.56) DD26 FEMALE 0.082 (2.08) 0.385 (9.78) 0.078 (1.98) 0.656 (16.66) 0.090 (2.29) Typ. 0.078 (1.98) 0.041 (1.04) 0.095 (2.41) Typ. 1.852 (47.04) DD44 MALE 0.650 (16.51) 0.926 (23.52) 2.406 (61.11) 0.078 (1.98) DD78 FEMALE 0.903 (22.94) 1.203 (30.56) 0.926 (23.52) 0.082 (2.08) 0.078 (1.98) 0.090 (2.29) Typ. 1.852 (47.04) DD44 FEMALE 0.082 (2.08) 0.082 (2.08) 0.655 (16.64) 0.041 (1.04) 0.095 (2.41) Typ. 0.078 (1.98) 0.090 (2.29) Typ. 0.082 (2.08) 0.082 (2.08) 0.078 (1.98) 2.500 (63.50) DD104 MALE 2.500 (63.50) 0.967 (24.56) 1.250 (31.75) 1.250 (31.75) 0.082 (2.08) Typ. 0.095 (2.41) Typ. 0.082 (2.08) Typ. Suggest 0.035 (0.89) O hole for contact termination positions. Suggest 0.123 0.003 (3.12) O hole for mounting connector with push-on fasteners. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 25 0.967 (24.56) 0.095 (2.41) Typ. DD104 FEMALE MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CRIMPING INFORMATION FOR DD AND ODD SERIES CRIMP CONTACTS USE INDICATED POSITRONIC TOOLS FOR BEST RESULTS Step 1: Strip wire to indicated length. Insulation Take Care Not To: - Damage or remove strands. Untwist or overtwist strands. Leave insulation particles on strands. Damage insulation. 0.010 0.150 (3.81) Stranded wire Correctly Stripped Wire Strands damaged or removed by stripping tool. Strands overtwisted. Insulation cut incorrectly. Particles of insulation on the stripped part of the wire. Wire insulation damaged. Strands untwisted. Examples of Stripping Faults Step 2: Crimp wire to contact. For Hand Crimp Tool: - Place contact into crimping tool. - Insert wire into contact. - Center contact by slowly closing the crimping tool until the crimp indenters make contact with the crimp barrel. - Complete the cycle of the crimping tool in one smooth motion. - Remove the crimped contact. For Automatic Feed Pneumatic Crimp Tool: - Insert the wire into the contact, positioned in the crimp tool by the plastic carrier. - Depress the activating device of the crimping tool to start the crimping cycle. - Remove the crimped contact. 26 MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CRIMPING INFORMATION FOR DD AND ODD CRIMP CONTACTS Step 3: Inspect the crimp. For All Tools: - Strands to be visible through the inspection hole. - Strands not to be visible beyond the insulation support. - Crimped contact to meet recommended conductor tensile force shown in chart. Crimp to meet recommended tensile strength. - Check for peeled gold and bent contacts. Wire Insulation, Typical Cross Section of Correctly Crimped Contact Correctly Crimped Contact Stripped wires compressed for improved conduction. Strands visible beyond insulation support. 8 Crimp indents Strands not visible through inspection hole. Crimp indents too close to inspection hole. Stripped part of the wire too long. Positronic Recommended Conductor TensileStrength WIRE SIZE AWG/(mm2) AXIALLOAD POUNDS/(N) 22 (0.3) 12 (53) 24 (0.25) 8 (36) 26 (0.12) 5 (22) 28 (0.08) 3 (13) 30 (0.05) 1.5 (4.4) Conductor tensile strength values are derived using silver tin-plated copper wires. Values may change depending upon what type of wire is used. 27 Stripped part of the wire too short. Crimp indents incorrectly located. Examples of Crimping Faults Positronic recommended tools for DD series contacts. For more information see contact crimp tools and accessories page. CRIMP TOOLS POSITIONERS FOR FC8022D POSITIONERS FOR MC8022D 9507, HAND CRIMP TOOL 9502-3 9502-4 9550-1, AUTOMATIC FEED PNEUMATIC CRIMP TOOL Supplied in reels Supplied in reels MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS DD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used STEP 1 2 3 4 5 6 7 8 DD 62 F 4 R7 N T6 S 9 STEP 1 - Basic Series STEP 9 - Special Options DD Series Consult Sales Department. STEP 2 - DD Series Connector Variants STEP 8 - Shell Options 15, 26, 44, 62, 78, 104 0 S X Z C STEP 3 - Connector Gender M - Male F - Female - Zinc Plated with Dichromate Seal. - Stainless Steel. - Tin Plated. - Tin Plated and Dimpled. - Cadmium with Dichromate Seal. STEP 4 - Type of Contacts 0 1 2 3 32 4 - *STEP 7 - Locking and Polarizing Systems Ordered Without Contacts. Crimp, 22 AWG-30 AWG (0.3mm2-0.05mm2). Solder cup, 22 AWG-30 AWG (0.3mm2-0.05mm2). Solder, Straight Printed Board Mount with 0.150 (3.81) Tail Length. Solder, Straight Printed Board Mount with 0.300 (7.62) Tail Length. Solder, 90 Printed Board Mount with 0.450 (11.43) Contact Extension. 0 V3 V5 VL T T2 T6 E E2 E6 *STEP 5 - Mounting Style 0 B3 B8 F P P2 R2 - R6 R7 R8 S S2 S5 S6 - S7 - Mounting Hole, 0.120 (3.05) O. Bracket, Mounting, 90 Metal with Cross Bar. Bracket, Mounting, 90 Plastic with Cross Bar. Float Mounts, Universal. Threaded Post, Brass, 0.375 (9.53) Length. Threaded Post, Nylon, 0.375 (9.53) Length. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3.05) O Mounting Hole with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut with Cross Bar. Swaged Spacer, 4-40 Threads, 0.375 (9.53) Length. Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. Swaged Locknut, 4-40 Threads. Swaged Spacer with Push-on Fasteners, 4-40 Threads, 0.375 (9.53) Length. Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, 0.515 (13.08) Length. - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male and Female Polarized Jackscrews. *STEP 6 - Hoods and Push-On Fasteners 0 J L Y - Y6 Z - H - G - W N **F - None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 78 and 104 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 78 and 104 only. Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews. Available in size 26, 44, 62, and 78 only. Hood, Top Opening,Metal. Available in size 26, 44, 62, and 78 only. Hood,EMI/RFI, Metal. Available in size 15, 26, 44, 62, and 78 only. Hood, Top or Side Opening, Plastic. Available in size 15, 26, and 44 only. Push-on Fastener, for 90 Mounting Brackets. Ferrite Inductor *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. **Ferrite inductor is available on contact type 32 only. 28 DD Series MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS AUTOMATIC FEED CRIMP TOOL, PNEUMATICALLY ACTUATED Part No. 9550-1 This fast cycling automatic feed crimp tool produces an 8 indent crimp on wire sizes 20 AWG (0.5mm2) through 32 AWG (0.03mm2). DD Series contacts must be ordered on reels. To order, specify part number 9550-1. Foot control valve is supplied as a standard accessory. MINIATURE STEP ADJUSTABLE TOOL (M22520/2-01) Part No. 9507 This miniature step adjustable hand crimping tool produces an 8 indent crimp configuration and will crimp wire sizes 20 AWG (0.5mm2) through 32 AWG (0.03mm2). To crimp female contacts, order contact positioner 9502-3. To crimp male contacts, order contact positioner 9502-4. Each positioner is equipped with a data plate which gives the correct crimp-depth setting for each wire size, and must be used with 9507 tool frame for best results when crimping Densi-D Series contacts. INSERTION/REMOVAL TOOL (M81969/1-04) One end of this tool is used to insert contacts into Densi-D Series connectors. The other end is used to extract contacts. This is accomplished by sliding the extraction tip down the wire into the connector until it bottoms against the contact. A slight rotation while pushing will release the contacts, which are then extracted by simultaneously pulling on the wire. 29 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Size 22 Contacts, Removable Crimp and Fixed Press-Fit and Solder Printed Board Mount Professional Quality U.L. Recognized File #E49351 CSA Recognized File #LR54219 Telecommunication U.L. File #14098 ODD Series connectors are low cost, professional quality, high density rectangular connectors recommended for use in sheltered, non-corrosive indoor environments having normal ventilation. ODD Series connectors utilize precision machined, removable contacts having closed barrel crimp terminations and solder cup wire terminations. For printed board mount application, press-fit and straight solder printed board mount and 90 angled solder terminations are available. Female removable contacts feature a rugged "Robi-D Open Entry" design. Female, fixed contacts for board mounted applications feature both rugged Robi-D design and standard open entry design, available to customer requirements. Six standard contact variants are offered in arrangements of 15, 26, 44, 62, 78, and 104 contacts. ODD Series connectors are mateable and compatible with other high density D-subminiature connectors conforming to MIL-DTL-24308, and are U.L. and CSA recognized. ODD Series connectors are widely used in computer and industrial control applications. ODD SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulators: Removable Contacts: Contacts: Contact Plating: Shells: Mounting Spacers: Vibration Lock Systems: Push-On Fasteners: Jackscrew Systems: Hoods: Glass filled polyester per MIL-M-24519, U L9 4 V-0, black color. Male contacts - precision machined brass alloy or phosphor bronze. Female contacts - precision machined high tensile phosphor bronze. Professional quality - gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate, zinc plate with dichromate seal. Nylon, plastic and brass, zinc plate with dichromate seal. Slide lock and lock tabs, steel with nickel plate. Phosphor bronze or beryllium copper with tin plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. Fixed Contacts, Board Mounted Applications: Contact Retention In Insulator: Contact Terminations: ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: 5 amperes nominal. 0.010 ohms maximum. 1000 V r.m.s. 5 G ohms. 0.042 inch (1.06mm). 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: -55C to +125C. 10 days. Shells: Polarization: Mounting To Angle Brackets: Mounting To Printed Board: Locking Systems: Mechanical Operations: Insert contact to rear face of insulator and release from rear face of insulator. Size 22 contact, male - 0.030 inch (0.76mm) diameter; female removable contacts feature a rugged "Robi-D Open Entry" design. Female contact - both rugged Robi-D design and standard open entry design available to customer requirements. 9 lbs. (40 N). Closed barrel crimp, wire sizes 22 AWG (0.3mm2) through 30 AWG (0.05mm 2). Solder cup wire, 0.035 inch (0.89mm) hole diameter for 22 AWG (0.3mm2) wire maximum. 0.020 inch (0.5mm) or 0.030 inch (0.76mm) diameter straight and 90 printed board mount contact terminations. Solid Press-Fit - 0.034 inch (0.86mm) across points with 0.020 inch (0.51mm) lead. Solid metal construction. Compliant Press-Fit - 0.047 inch (1.19mm) diameter with 0.022 inch (0.56mm) lead-in diameter. Male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and riveted fasteners with 0.120 inch (3.05mm) clearance hole, and threaded riveted fasteners with 440 threads and nylon lock inserts. Rapid installation push-on fasteners and mounting posts. Jackscrews and vibration locking systems. 500 operations minimum per IEC 512-5. 30 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE ODD 15 ODD 26 ODD 62 ODD 44 ODD 78 ODD 104 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 D E H D1 0.375 (9.53) Max. C 0.120 (3.05) 0.005 O Mounting hole, two places 0.036 (0.91) 0.008 A 10 Typ. G 0.120 (3.05) 0.010 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available OPTIONALSHELLASSEMBLY CONNECTOR VARIANT SIZES ODD 15 M ODD 15 F ODD 26 M ODD 26 F ODD 44 M ODD44 F ODD 62 M ODD62 F ODD78 M ODD78 F ODD104 M ODD104 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) 2.729 (69.32) 2.729 (69.32) B 0.005 OPTIONALSHELLASSEMBLY WITH UNIVERSALFLOAT MOUNTS B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 2.500 (63.50) 2.500 (63.50) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) 2.212 (56.18) 2.189 (55.60) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places 0.032 (0.81) Total diametral float D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.668 (16.97) 0.668 (16.97) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 2.302 (58.47) 2.302 (58.47) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.596 (15.14) 0.596 (15.14) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) 0.503 (12.78) 0.485 (12.32) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 31 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT 0.003 CO MALE CONTACT 0.010 A 0.003 CO 0.010 A 0.001 0.030 O (0.76) 0.010 0.150 (3.81) 0.003 BO 0.010 0.150 (3.81) Crimp contacts may be supplied kitted with connector or ordered separately. 0.003 BO PART NUMBER WIRE SIZE AWG/(mm2 ) A BO CO PART NUMBER WIRE SIZE AWG/(mm 2) A BO CO FC8122D 22 / 24 / 26 / 28 / 30 (0.3/0.25/0.12/0.08/0.05) 0.529 (13.44) 0.035 (0.89) 0.047 (1.19) MC8122D 22 / 24 / 26 / 28 / 30 (0.3/0.25/0.12/0.08/0.05) 0.531 (13.49) 0.035 (0.89) 0.047 (1.19) Material - Phosphor bronze Plating - Gold flash over nickel Material - Brass Plating - Gold flash over nickel SOLDER CUP CONTACTS FEMALE CONTACT 0.003 0.047 (1.19) O MALE CONTACT 0.010 0.529 (13.44) 0.003 0.047 (1.19) O 0.010 0.531 (13.49) 0.001 0.030 (0.76) O 0.010 0.150 (3.81) 0.003 0.035 (0.89) O 0.010 0.150 (3.81) Part Number: FS8122D 0.003 0.035 (0.89) O Part Number: MS8122D Material - Phosphor bronze Plating - Gold flash over nickel Material - Brass Plating - Gold flash over nickel Solder contacts may be supplied kitted with connector or ordered separately. Press-Fit CONNECTOR Fixed female jackscrews Swaged spacer with 4-40 threads 0.177 (4.50) 0.225 (5.72) 0.022 (0.56) O Lead in 0.047 (1.18) O 0.010 (0.25) Min. Typical Part Number: ODD44F98S0T20 V3 lock tabs Swaged spacer with 4-40 threads 0.218 (5.54) 0.225 (5.72) 0.010 (0.25) Min. For "Omega" Press-Fit contacts, specify code 98 in step 4 ordering information. 0.034 (0.86) Across points 0.020 (0.51) O Lead in Typical Part Number: ODD44F9S0V3X For solid press-fit contacts, specify code 9 in step 4 ordering information. STRAIGHT PRINTED BOARD MOUNT CONNECTOR Code No. L 3 0.150 (3.81) 32 0.300 (7.62) For straight printed board mount contacts specify code no. in step 4 of ordering information Swaged spacer with push-on fastener phosphor bronze Fixed female jackscrew Fixed male jackscrew 0.010 0.010 (0.25) Min. 0.225 (5.72) L 0.020 (0.51) O DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. Typical Part Number: ODD62F3S60T6X 32 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONNECTOR CODE 5, 0.450 (11.50) CONTACT EXTENSION C RUGGED "Robi-D Open Entry" FEMALE CONTACT 0.220 (5.59) Max. ODD005R7000 0.450 (11.43) CONTACT EXTENSION PART NUMBER Fixed female jackscrews 0.008 B A Specify code 5 in step 4 of ordering information A B C D ODD1505R7000 1.204 0.984 0.528 0.450 (30.58) (24.99) (13.41) (11.43) ODD2605R7000 1.532 1.312 0.528 0.450 (38.91) (33.32) (13.41) (11.43) ODD4405R7000 2.072 1.852 0.528 0.450 (52.63) (47.04) (13.41) (11.43) ODD6205R7000 2.720 2.500 0.528 0.450 (69.09) (63.50) (13.41) (11.43) ODD7805R7000 2.626 2.406 0.573 0.450 (66.70) (61.11) (14.55) (11.43) See next page for size 104 Right Angle Connectors. 0.082 (2.08) Typ. 0.082 (2.08) Typ. 0.082 (2.08) Typ. D Numbering shown is rear view of male and face view of female. D 0.078 (1.98) Typ. 0.078 (1.98) Typ. 0.125 (3.18) Typical Part Number: ODD78M5R7NT20 0.020 (0.51) O Typical Part Number: ODD44F5R7NT2X Push-on fastener, beryllium copper. 90 PRINTED BOARD MOUNT CONNECTOR C 0.220 (5.59) Max. CODE 4, 0.314 (7.98) CONTACT EXTENSION SLOTTED OPEN ENTRY FEMALE CONTACT ODD004R7000 0.314 (7.98) CONTACT EXTENSION PART NUMBER Fixed female jackscrews 0.008 B A Specify code 4 in step 4 of ordering information D 0.100 (2.54) Typ. 0.100 (2.54) Typical Part Number: ODD44F4R7NT2X DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 33 A B C D ODD1504R7000 1.204 0.984 0.414 (30.58) (24.99) (10.52) 0.314 (7.98) ODD2604R7000 1.532 1.312 0.414 (38.91) (33.32) (10.52) 0.314 (7.98) ODD4404R7000 2.072 1.852 0.414 (52.63) (47.04) (10.52) 0.314 (7.98) ODD6204R7000 2.720 2.500 0.414 (69.09) (63.50) (10.52) 0.314 (7.98) ODD7804R7000 2.626 2.406 0.414 (66.70) (61.11) (10.52) 0.314 (7.98) Numbering shown is rear view of male and face view of female. See next page for size 104 Right Angle Connectors. 0.100 (2.54) Typ. 0.100 (2.54) Typ. 0.100 (2.54) Typ. D 0.125 (3.18) 0.030 (0.76) O Push-on fastener, beryllium copper. Typical Part Number: ODD78M4R7NT20 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS FIXED CONTACT SOLDER CUP CONNECTOR 0.220 Max. (5.59) 22 AWG max. (0.3mm2) For fixed solder cup contacts, specify code 21 in step 4 of ordering information. 0.082 (2.08) 0.145 (3.68) Fixed female jackscrew Fixed female jackscrews Fixed male jackscrew Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: ODD26F2100T6X Typical Part Number: ODD26F2100T2X 90 PRINTED BOARD MOUNT CONNECTOR CODE 5, 0.450 (11.43) CONTACT EXTENSION RUGGED "Robi-D Open Entry" FEMALE CONTACT CONTACT VARIANT 104 Fixed female jackscrews 0.220 (5.59) Max. 0.614 (15.60) Specify code 5 in step 4 of ordering information 0.008 2.500 (63.50) 2.720 (69.09) 0.450 (11.43) 0.082 (2.08) Typ. 0.125 (3.18) Typical Part Number: ODD104F5R7NT2X Numbering shown is rear view of male and face view of female 0.020 (0.51) O Push-on fastener, beryllium copper. 90 PRINTED BOARD MOUNT CONNECTOR CODE 4, 0.314 (7.98) CONTACT EXTENSION SLOTTED OPEN ENTRY FEMALE CONTACT CONTACT VARIANT 104 Fixed female jackscrews 0.220 (5.59) Max. 0.514 (13.06) Specify code 4 in step 4 of ordering information 0.008 2.500 (63.50) 2.720 (69.09) 0.314 (7.98) 0.100 (2.54) Typ. Typical Part Number: ODD104F4R7NT2X 0.125 (3.18) Numbering shown is rear view of male and face view of female 0.030 (0.76) O Push-on fastener, beryllium copper. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 34 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Mount connector with mating face positioned to follow direction of arrows. 0.984 (24.99) 0.190 (4.83) 0.492 (12.50) 2.500 (63.50) A 0.973 (24.71) 1.250 (31.75) ODD15 MALE A C A 0.090 (2.29) Typ. ODD62 MALE 0.984 (24.99) 0.492 (12.50) 0.095 (2.41) Typ. C 0.215 (5.46) A A ODD15 FEMALE 2.500 (63.50) C 0.090 (2.29) Typ. A 0.975 (24.77) 1.250 (31.75) 1.312 (33.32) A 0.380 (9.65) 0.656 (16.66) A ODD62 FEMALE ODD26 MALE C C 0.090 (2.29) Typ. 0.095 (2.41) Typ. A A 1.312 (33.32) 2.406 (61.11) 0.656 (16.66) 0.385 (9.78) A 0.903 (22.94) 1.203 (30.56) B ODD26 FEMALE C 0.090 (2.29) Typ. A ODD78 MALE 1.852 (47.04) D B C 0.095 (2.41) Typ. 0.650 (16.51) B 0.926 (23.52) A 2.406 (61.11) ODD44 MALE C 0.090 (2.29) Typ. 1.852 (47.04) B 0.655 (16.64) 0.926 (23.52) ODD78 FEMALE A D ODD44 FEMALE C 0.095 (2.41) Typ. B C A 0.090 (2.29) Typ. B CODE NUMBER A B CO D 4 0.100 (2.54) 0.100 (2.54) 0.045 (1.14) 0.100 (2.54) 3, 32, 5 0.078 (1.98) 0.082 (2.08) 0.035 (0.89) 0.123 (3.12) 9, 98 0.078 (1.98) 0.082 (2.08) * 0.123 (3.12) 2.500 (63.50) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 1.250 (31.75) 0.967 (24.56) ODD104 MALE B Typ. C Suggest 0.123 0.003 (3.12) O hole for mounting connector with push-on fasteners. Suggest 0.035 (0.89) O hole for contact termination positions. For Code 9 Solid Press-Fit Contacts: *Suggest 0.0355 0.0010 (0.90) O drill with 0.0006 (15) minimum tin or tin/lead over 0.0010 (25) minimum copper plate. Final hole is 0.0315 +0.0010 -0.0020 (0.80) O. *For Code 98 "Omega" Compliant Press-Fit Contacts: Suggest 0.04530.0010 (1.150) O hole with 0.0005 (0.013) minimum tin or tin/lead over 0.001 (0.03) minimum copper plate. Final hole size is 0.0394+0.0035-0.0024 (1.000+0.090-0.060) O 35 0.903 (22.94) 1.203 (30.56) A 0.095 (2.41) Typ. 2.500 (63.50) 0.981 (24.92) 1.250 (31.75) ODD104 FEMALE B Typ. 0.095 (2.41) Typ. C PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter "R" after the contact part number, such as MC8122DR for a male contact and FC8122DR for a female contact. Enlarged section of plastic contact carrier. ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used STEP 1 2 3 4 5 6 7 8 ODD 62 F 5 R7 N T6 S 9 STEP 1 - Basic Series STEP 9 - Special Options ODD Series Consult Sales Department. STEP 2 - ODD Series Connector Variants STEP 8 - Shell Options 15, 26, 44, 62, 78, 104 0 S X Z STEP 3 - Connector Gender M - Male F - Female *STEP 7 - Locking and Polarizing Systems STEP 4 - Type of Contacts - Ordered Without Contacts. - Crimp, 22 AWG-30 AWG (0.3mm2-0.05mm2). - Solder cup, 22 AWG-30 AWG (0.3mm2-0.05mm2), Removable contacts. 21 - Solder cup, 22 AWG-30 AWG (0.3mm2-0.05mm2 ), Fixed contacts. 3 - Solder, Straight Printed Board Mount with 0.150 (3.81) Tail Length. 32 - Solder, Straight Printed Board Mount with 0.300 (7.62) Tail Length. 4 - Solder, 90 Printed Board Mount with 0.314 (7.98) Contact Extension. 5 - Solder, 90 Printed Board Mount with 0.450 (11.43) Contact Extension. 9 - Press-Fit, Solid. 98 - Press-Fit, Compliant. 0 V3 V5 VL T T2 T6 E E2 E6 0 1 2 *STEP 5 - Mounting Style 0 B3 B8 F P P2 R2 - R6 R7 R8 S S2 S5 S6 - S7 - Mounting Hole, 0.120 (3.05) O. Bracket, Mounting, 90 Metal with Cross Bar. Bracket, Mounting, 90 Plastic with Cross Bar. Float Mounts, Universal. Threaded Post, Brass, 0.225 (5.71) Length. Threaded Post, Nylon, 0.225 (5.71) Length. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3.05) O Mounting Hole with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut with Cross Bar. Swaged Spacer, 4-40 Threads, 0.225 (5.71) Length. Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. Swaged Locknut, 4-40 Threads. Swaged Spacer with Push-on Fasteners, 4-40 Threads, 0.225 (5.71) Length. Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, 0.375 (9.53) Length. - Zinc Plated with Dichromate Seal. - Stainless Steel. - Tin Plated. - Tin Plated and Dimpled. - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods Only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male and Female Polarized Jackscrews. *STEP 6 - Hoods and Push-On Fasteners 0 J L Y - Y6 Z - H G W N **F **Q - None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 78 and 104 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 78 and 104 only. Hood, Top or Side Opening, Robust Extended Height, Composite and Plastic with Rotating Male Jackscrews. Available in size 15, 26, 44, 62 and 78 only. Hood, Top Opening, Metal. Available in size 26, 44, 62, and 78 only. Hood,EMI/RFI, Metal. Available in size 15, 26, 44, 62, and 78 only. Hood, Top or Side Opening, Plastic. Available in size 15, 26, and 44 only. Push-on Fastener, for 90 Mounting. Ferrite Inductor. Ferrite Inductor with Push-on Fastener, for 90 Mounting Brackets. *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. **Ferrite inductor is available on contact types 32 and 5 only. For ODD crimping information, see DD Series, p. 26 & 27. 36 PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY SUBMINIATURE-D CONNECTORS ODD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS AUTOMATIC FEED CRIMP TOOL, PNEUMATICALLY ACTUATED Part No. 9550-1 This fast cycling automatic feed crimp tool produces an 8 indent crimp on wire sizes 20 AWG (0.5mm2) through 32 AWG (0.03mm 2). ODD Series contacts must be ordered on reels. To order, specify part number 9550-1. Foot control valve is supplied as a standard accessory. MINIATURE STEP ADJUSTABLE TOOL (M22520/2-01) Part No. 9507 This miniature step adjustable hand crimping tool produces an 8 indent crimp configuration and will crimp wire sizes 20 AWG (0.5mm2) through 32 AWG (0.03mm2). To crimp female contacts, order contact positioner 9502-3. To crimp male contacts, order contact positioner 9502-4. Each positioner is equipped with a data plate which gives the correct crimp-depth setting for each wire size, and must be used with 9507 tool frame for best results when crimping ODD Series contacts. INSERTION/REMOVAL TOOL (M81969/1-04) One end of this tool is used to insert contacts into ODD Series connectors. The other end is used to extract contacts. This is accomplished by sliding the extraction tip down the wire into the connector until it bottoms against the contact. A slight rotation while pushing will release the contacts, which are then extracted by simultaneously pulling on the wire. Positronic Recommended Conductor Tensile Strength WIRE SIZE AWG/(mm2) AXIALLOAD POUNDS/(N) 22 (0.3) 12 (53) 24 (0.25) 8 (36) 26 (0.12) 5 (22) 28 (0.08) 3 (13) 30 (0.05) 1.5 (4.4) Conductor tensile strength values are derived using silver-tin plated copper wires. Values may change depending upon what type of wire is used. 37 Positronic recommended tools for ODD series contacts. CRIMP TOOLS POSITIONERS FOR FC8122D POSITIONERS FOR MC8122D 9507, HAND CRIMP TOOL 9502-3 9502-4 9550-1, AUTOMATIC FEED PNEUMATIC CRIMP TOOL Supplied in reels Supplied in reels PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS ORD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Size 20 Contacts, Removable Crimp Industrial Quality Connectors IEC Publication 807-3 Performance Level Two ORD Series connectors are low cost, industrial/professional quality D-Subminiature connectors with closed barrel crimp removable contacts. ORD Series connectors are recommended for use in sheltered, mildly corrosive environments having a wide range of temperatures with normal ventilation where high performance is required. ORD Series connectors utilize precision-machined contacts to provide durability. Female contacts feature the low cost, high performance Robi-D Open Entry design. ORD Series connectors meet the performance requirements of IEC 807-3, Performance Level Two. Closed entry female contacts are available upon request. Six (6) standard contact variants are offered in arrangements of 9, 15, 25, 29, 37, and 50 contacts. ORD Series connectors are mateable and compatible with all D-Subminiature connectors conforming to MIL-DTL-24308, IEC 807-2, and IEC 807-3. A wide assortment of cable support hoods and locking systems is available from stock. ORD Series connectors also conform to EIARS 232 and RS 449, and CCITTX.24 interface connection requirements. ORD SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: CLIMACTIC CHARACTERISTICS: Insulators: Temperature Range: Damp Heat, Steady State: Contacts: Contact Plating: Shells: Mounting Spacers: Vibration Lock Systems: Jackscrew Systems: Hoods: Glass filled DAP per ASTM-D-5948, SDG-F, UL 94V-0, green color. Male contacts - precision machined brass alloy. Female contacts - precision machined high tensile copper alloy with rugged "Robi-D Open Entry" design. Industrial performance - gold flash over nickel plate. Other finishes available upon request. Steel with tin plate; zinc plate with dichromate seal, or stainless steel, passivated. Brass available upon request. Brass, zinc plate with dichromate seal, or clear zinc plate. Slide lock and lock tabs, steel with nickel plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. -55C to +125C. 10 days. MECHANICAL CHARACTERISTICS: Removable Contacts: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 male contact - 0.040 inch (1.02mm) diameter; Size 20 female contacts - Rugged "Robi-D Open Entry" design. Contact Retention In Insulator: 9 lbs. (40 N). Contact Terminations: Closed barrel crimp, wire sizes 18 AWG (1.0mm2) through 24 AWG (0.25mm2). Shells: Tin-plated male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and vibration locking systems. 500 operations minimum per IEC 512-5 for " `Robi-D' Open Entry" design. Polarization: Locking Systems: Mechanical Operations: ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: 7.5 amperes nominal. 0.005 ohms maximum. 1000 V r.m.s. 5 G ohms. 0.039 inch (1.0mm). 300 V r.m.s. 38 PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS ORD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE ORD 9 ORD 15 ORD 29 ORD 25 ORD 37 ORD 50 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 D E H D1 0.375 (9.53) Max. C 0.120 (3.05) 0.005 O Mounting hole, two places 0.036 (0.91) 0.008 A 10 Typ. G 0.120 (3.05) 0.010 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available OPTIONALSHELLASSEMBLY CONNECTOR VARIANT SIZES ORD 9 M ORD 9 F ORD 15 M ORD 15 F ORD 25 M ORD25 F ORD 29 M ORD29 F ORD37 M ORD37 F ORD50 M ORD50 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 1.770 (44.96) 1.770 (44.96) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) B 0.005 OPTIONALSHELLASSEMBLY WITH UNIVERSALFLOAT MOUNTS B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 1.534 (38.96) 1.534 (38.96) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 1.274 (32.36) 1.251 (31.78) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places 0.032 (0.81) Total diametral float D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 1.322 (33.58) 1.322 (33.58) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.539 (13.69) 0.539 (13.69) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.217 (5.51) 0.237 (6.02) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.450 (11.43) 0.431 (10.95) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 39 PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS ORD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT MALE CONTACT RUGGED `ROBI-D' OPEN ENTRY DESIGN A A 0.015 0.015 0.165 (4.19) 0.165 (4.19) OB OB OC 0.001 O 0.040 (1.02) Material - Phosphor bronze. Plating - Gold flash over nickel. OC Material - Brass. Plating - Gold flash over nickel. Closed entry contacts are available. See page 43 of the RD Series in this catalog for additional information. PART NUMBER WIRE SIZE AWG/(mm2 ) A 0.015 BO 0.005 CO 0.005 FC6120D 20 / 22 / 24 (0.5/0.3/0.25) 0.538 (13.67) 0.044 (1.12) 0.066 (1.68) MC6020D 20 / 22 / 24 (0.5/0.3/0.25) 0.538 (13.67) 0.044 (1.12) 0.066 (1.68) FEMALE CONTACT MALE CONTACT RUGGED `ROBI-D' OPEN ENTRY DESIGN 0.086 O (2.18) 0.927 (23.55) 0.915 (23.24) 0.170 (4.32) 0.170 (4.55) 0.055 O (1.40) 0.001 0.086 O (2.18) 0.040 O (1.02) 0.055 O (1.40) FC6118D MC6018D Material - Phosphor bronze. Material - Brass. Plating - Gold flash over nickel. Plating - Gold flash over nickel. REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter "R" after the contact part number, such as MC6020DR for a male contact and FC6120DR for a female contact. Enlarged section of plastic contact carriers DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 40 PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS ORD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used STEP 1 2 3 4 5 6 7 8 ORD 15 M 1 0 H 0 0 9 STEP 1 - Basic Series STEP 9 - Special Options ORD Series Consult Sales Department. STEP 2 - ORD Series Connector Variants STEP 8 - Shell Options 9, 15, 25, 29, 37, 50 0 S X Z C STEP 3 - Connector Gender M - Male F - Female STEP 4 - Type of Contacts 0 1 *STEP 7 - Locking and Polarizing Systems - Ordered Without Contacts. - Crimp, 20 AWG-24 AWG (0.5mm2-0.25mm2). 0 V3 V5 VL T T2 T6 E E2 E6 *STEP 5 - Mounting Style 0 F S2 S5 - - Zinc Plated with Dichromate Seal. - Stainless Steel. - Tin Plated. - Tin Plated and Dimpled. - Cadmium plated with Dichromate Seal. Mounting Hole, 0.120 (3.05) O. Float Mounts, Universal. Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. Swaged Locknut, 4-40 Threads. - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods Only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male and Female Polarized Jackscrews. *STEP 6 - Hoods 0 J L Y - Y6 Z - H - G - W - None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 50 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 50 only. Hood, Top or Side Opening, Robust Extended Height, Composite and Plastic with Rotating Male Jackscrews. Available in size 9, 15, 25, 37, and 50 only. Hood, Top Opening,Metal. Available in size 15, 25, 37, and 50 only. Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50 only. Hood, Top or Side Opening, Plastic. Available in size 9, 15, and 25 only. *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. For ORD crimping information, see SD Series, p. 16 and 17. For ORD crimp tools, see RD Series, p. 46. 41 MILITARY QUALITY, CRIMP REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS Rhapso-D Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Size 20 Contacts, Crimp Removable Military/Industrial Quality Connectors IEC Publication 807-3 Performance Level One MIL-DTL-24308 and MIL-C-39029 U.L. Recognized CSA Recognized File #E49351 File #LR54219 Telecommunication U.L. File #14098 Rhapso-D Series connectors are Military/Industrial quality rectangular connectors designed for use in sheltered, mildly corrosive environments having a wide range of temperature, pressure and humidity changes. These crimp removable contact connectors are qualified to MIL-DTL-24308 and MIL-C39029, and will meet the performance requirements of IEC 807-3, Performance Level One. Rhapso-D Series connectors utilize precision machined contacts with closed barrel, crimp terminations. The female contact features a rugged closed entry design contact with stainless steel shroud. A "Robi-D Open Entry" female contact is also available. Six standard connector variants are offered in arrangements of 9, 15, 25, 29, 37 and 50 contacts. Rhapso-D Series connectors are mateable and compatible with all D-Subminiature connectors conforming to MIL-DTL-24308, IEC 807-2 and IEC 807-3. A wide assortment of cable support hoods and locking systems is available from stock. Rhapso-D Series connectors conform to EIARS 232 and RS 449, and CCITT X.24 interface connection requirements. RHAPSO-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Removable Contacts: Contacts: Contact Plating: Shells: Mounting Spacers: Jackscrew Systems: Vibration Lock Systems: Hoods: Glass filled DAP per ASTM-D-5948, SDG-F, UL 94V-0, green color. Male contacts - precision machined brass alloy. Female contacts - precision machined high tensile copper alloy with stainless steel shroud or open entry Robi-D design. Military performance - 0.000050 inch (1.25 microns) gold over copper plate. Industrial performance - gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate; zinc and cadmium plate with dichromate seal, stainless steel, passivated. Brass, zinc plate with dichromate seal. Steel with zinc plate and dichromate seal, or clear zinc plate. Slide lock and lock tabs, steel with nickel plate. Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. Contact Retention In Insulator: Contact Terminations: Shells: Polarization: Locking Systems: Mechanical Operations: Insert contact to rear face of insulator and release from rear face of insulator. Size 20 contact, male - 0.040 inch (1.02mm) diameter; female - closed entry design with stainless steel shroud or open entry Robi-D design. 9 lbs. (40 N). Closed barrel crimp, wire sizes 18 AWG (1.0mm2) through 30 AWG (0.05mm2). Male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and vibration locking systems. 1000 operations minimum per IEC 512-5 for closed entry female contact. 500 operations per IEC 512-5 for "Robi-D Open Entry" design female contact. ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: 7.5 amperes nominal. 0.005 ohms maximum. 1000 V r.m.s. 5 G ohms. 0.039 inch (1.0mm). 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: -55C to +125C. 21 days. 42 MILITARY QUALITY, CRIMP REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS RD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE RD 9 RD 15 RD 29 RD 25 RD 37 RD 50 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 D E H D1 C 0.036 (0.91) 0.008 A 10 Typ. G 0.375 (9.53) Max. 0.120 (3.05) 0.005 O Mounting hole, two places 0.120 (3.05) 0.010 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available 0.032 (0.81) Total diametral float OPTIONALSHELLASSEMBLY CONNECTOR VARIANT SIZES RD 9 M RD 9 F RD 15 M RD 15 F RD 25 M RD25 F RD 29 M RD29 F RD37 M RD37 F RD50 M RD50 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 1.770 (44.96) 1.770 (44.96) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) B 0.005 OPTIONALSHELLASSEMBLY WITH UNIVERSALFLOAT MOUNTS B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 1.534 (38.96) 1.534 (38.96) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 1.274 (32.36) 1.251 (31.78) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 1.322 (33.58) 1.322 (33.58) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.539 (13.69) 0.539 (13.69) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.217 (5.51) 0.237 (6.02) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.450 (11.43) 0.431 (10.95) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 43 MILITARY QUALITY, CRIMP REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS RD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CRIMP CONTACTS CLOSED CRIMP BARREL FEMALE CONTACT ("CLOSED ENTRY" DESIGN) MALE CONTACT A A *Color Code *Color Code 0.040 O (1.02) BO BO Stainless Steel Shroud 0.170 (4.32) 0.170 (4.32) CO CO Material - Leaded nickel copper. Material - Brass. Plating -Gold flash over nickel or 0.000050 inch (1.25) gold over copper for military specification contacts. Plating -Gold flash over nickel or 0.000050 inch (1.25) gold over copper for military specification contacts. *Color Code -ORANGE/BLUE/GRAY for military specification contacts. *Color Code -ORANGE/BLUE/WHITE for military specification contacts. PART NUMBER WIRE SIZE AWG/(mm 2) A BO CO PART NUMBER WIRE SIZE AWG/(mm 2) A BO CO FC6020D 20 / 22 / 24 (0.5/0.3/0.25) 0.538 (13.67) 0.044 (1.12) 0.066 (1.68) MC6020D 20 / 22 / 24 (0.5/0.3/0.25) 0.550 (13.97) 0.044 (1.12) 0.066 (1.68) FC6026D 26 / 28 / 30 (0.12/0.08/0.05) 0.538 (13.67) 0.027 (0.69) 0.066 (1.68) MC6026D 26 / 28 / 30 (0.12/0.08/0.05) 0.550 (13.97) 0.027 (0.69) 0.066 (1.68) *M39029/63-368 20 / 22 / 24 (0.5/0.3/0.25) 0.538 (13.67) 0.044 (1.12) 0.066 (1.68) *M39029/64-369 20 / 22 / 24 (0.5/0.3/0.25) 0.550 (13.97) 0.044 (1.12) 0.066 (1.68) Crimp contacts may be supplied kitted with connector or ordered separately. See page 46 for crimp tool information. FEMALE CONTACT (""Robi-D Open Entry"" DESIGN) MALE CONTACT 18 AWG (1.0mm2) max. A 0.927 (23.55) 0.170 (4.32) CO BO 0.055 O (1.40) Material - Phosphor bronze. 0.040 O (1.02) Plating -Gold flash over nickel. PART NUMBER FC6120D WIRE SIZE AWG/(mm 2) A 20 / 22 / 24 (0.5/0.3/0.25) 0.538 (13.67) BO 0.086 O (2.18) Plating -Gold flash over nickel. 0.044 (1.12) 0.066 (1.68) 0.915 (23.24) 0.055 O (1.40) 0.170 (4.32) 0.170 (4.32) Material - Brass. CO FEMALE CONTACT ("CLOSED ENTRY" DESIGN) 18 AWG (1.0mm2) max. 0.086 O (2.18) Part Number: MC6018D REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts. All male and female crimp contacts can be ordered in reels by adding letter "R" after the contact part number, such as MC6020DR for a male contact and FC6026DR for a female contact. Stainless steel shroud Part Number: FC6018D Material - Phosphor bronze. Plating -Gold flash over nickel. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. For RD crimping information, see SD Series, p. 16 and 17. Enlarged section of plastic contact carriers 44 MILITARY QUALITY, CRIMP REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS RD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used STEP 1 2 3 4 5 6 7 8 RD 15 M 12 0 H 0 0 9 STEP 1 - Basic Series STEP 9 - Special Options RDSeries Consult Sales Department. STEP 2 - RD Series Connector Variants STEP 8 - Shell Options 9, 15, 25, 29, 37, 50 0 S X Z C STEP 3 - Connector Gender M - Male F - Female STEP 4 - Type of Contacts 0 1 12 14 - *STEP 7 - Locking and Polarizing Systems Ordered Without Contacts. Crimp, 20 AWG-24 AWG (0.5mm2-0.25mm2). Crimp, 26 AWG-30 AWG (0.12mm 2-0.08mm 2). Crimp, 20 AWG-24 AWG (0.5mm2-0.25mm2) "Robi-D Open Entry" female contact . 0 V3 V5 VL T T2 T6 E E2 E6 *STEP 5 - Mounting Style 0 F S2 S5 - - Zinc Plated with Dichromate Seal. - Stainless Steel. - Tin Plated. - Tin Plated and Dimpled. - Cadmium plated with Dichromate Seal. Mounting Hole, 0.120 (3.05) O. FloatMounts, Universal. Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. Swaged Locknut, 4-40 Threads. - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods Only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male and Female Polarized Jackscrews. *STEP 6 - Hoods 0 J L Y - None. - Hood, Top Opening, Plastic. - Hood, Side Opening, Plastic. - Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 50 only. Y6 - Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 50 only. Z - Hood, Top or Side Opening, Robust Extended Height, Composite and Plastic with Rotating Male Jackscrews. Available in size 9, 15, 25, 37, and 50 only. H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only. G - Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and size 50 only. W - Hood, Top or Side Opening, Plastic. Available in size 9, 15, and 25 only. *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. For RD crimping information, see SD Series, p. 16 and 17. 45 MILITARY QUALITY, CRIMP REMOVABLE CONTACT, SUBMINIATURE-D CONNECTORS RD Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS AUTOMATIC FEED CRIMP TOOL, PNEUMATICALLY ACTUATED Part No. 9550-1 This fast cycling automatic feed crimp tool produces an 8 indent crimp on wire sizes 20 AWG (0.5mm2) through 32 AWG (0.03mm2). Rhapso-D Series contacts must be ordered on reels. To order, specify part number 9550-1. Foot control valve is supplied as a standard accessory. MINIATURE STEP ADJUSTABLE TOOL (M22520/2-01) Part No. 9507 This miniature 8 step adjustable hand crimping tool produces an 8 indent crimp configuration and will crimp wire sizes 18 AWG (1.0mm2) through 32 AWG (0.03mm2). To crimp wire size 18 AWG (1.0mm2), order contact positioner 9502-11. To crimp wire size 20 AWG (0.5mm2) through 30 AWG (0.05mm2), order contact positioner 9502-5. Each positioner is equipped with a data plate which gives the correct crimp-depth setting for each wire size, and must be used with 9507 tool frame for best results when crimping RhapsoD Series contacts. INSERTION/REMOVAL TOOL (M81969/1-02) Positronic Recommended Conductor Tensile Strength WIRE SIZE AWG/(mm2) AXIALLOAD POUNDS/(N) 18 (1.0) 28 (125) 20 (0.5) 20 (89) 22 (0.3) 12 (53) 24 (0.25) 8 (36) 26 (0.12) 5 (22) 28 (0.08) 3 (13) 30 (0.05) 1.5 (6.7) Conductor tensile strength values are derived using silver-tin plated copper wires. Values may change depending upon what type of wire is used. One end of this tool is used to insert contacts into Rhapso-D Series connectors. The other end is used to extract contacts. This is accomplished by sliding the extraction tip down the wire into the connector until it bottoms against the contact. A slight rotation while pushing will release the contacts, which are then extracted by simultaneously pulling on the wire. Positronic recommended tools for RD series contacts. For more information see contact crimp tools and accessories page. CRIMP TOOLS POSITIONERS FOR FC6020D, MC6020D, FC6026D, MC6026D, FC6120D M39029/63-368 M39029/64-369 POSITIONERS FOR FC6018D, MC6018D, FC6118D 9507, HAND CRIMP TOOL 9502-5 9502-11 9550-1, AUTOMATIC FEED PNEUMATIC CRIMP TOOL Supplied in reels Not Available 46 MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS Harmo-D Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS Size 20 Contacts, Fixed Military/Industrial Quality Connectors IEC Publication 807-2 Performance Level One MIL-DTL-24308 U.L. Recognized File #E49351 CSA Recognized File #LR54219 Telecommunication U.L. File #14098 Harmo-D Series connectors are Military/Industrial quality rectangular connectors designed for use in sheltered, mildly corrosive environments having a wide range of temperature, pressure and humidity changes. These fixed contact connectors are qualified to MIL-DTL-24308 and meet the performance requirements of IEC 807-2, Performance Level One. Harmo-D Series connectors utilize precision machined contacts which are fixed within the connector body. The female contact features a rugged, closed entry design contact with a stainless steel shroud. Five standard connector variants are offered in arrange- ments of 9, 15, 25, 37 and 50 contacts. Each connector variant is available with contact terminations for solder cup, wrap post and straight and 90 printed board mount terminations with Inch and Metric footprints. Harmo-D Series connectors are mateable and compatible with all D-Subminiature connectors conforming to IEC 807-2 and MIL-DTL-24308. A wide assortment of printed board mounting hardware, cable support hoods and locking systems is available from stock. Harmo-D Series connectors conform to EIA RS 232 and RS 449, and CCITT X.24 interface connection requirements. HARMO-D SERIES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Fixed Contacts: Contacts: Contact Plating: Shells: Mounting Spacers and Brackets: Push-On Fasteners: Jackscrew Systems: Vibration Lock Systems: Hoods: Glass filled DAP per ASTM-D-5948, SDG-F, UL 94V-0, green color. Male contacts - precision machined brass alloy. Female contacts - precision machined high tensile phosphor bronze with stainless steel shroud. Military performance - 0.000050 inch (1.25 microns) gold over copper plate. Industrial performance - gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate; zinc and cadmium plate with dichromate seal, stainless steel, passivated. Nylon plastic, or brass with tin plate; zinc plate with dichromate seal. Phosphor bronze or beryllium copper with tin plate. Steel with zinc plate and dichromate seal, or clear zinc plate. Slide lock and lock tabs, steel with nickel plate. Thermoplastic UL 94V-0. Composite, brass or steel with zinc plate and dichromate seal. ELECTRICAL CHARACTERISTICS: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: 7.5 amperes nominal. 0.005 ohms maximum. 1000 V r.m.s. 5 G ohms. 47 Resistance To Solder Iron Heat: Contact Terminations: Shells: Polarization: Mounting To Angle Brackets: Mounting To Printed Board: Locking Systems: 0.039 inch (1.0mm). 300 V r.m.s. CLIMATIC CHARACTERISTICS: Temperature Range: Damp Heat, Steady State: Contact Retention In Insulator: -55C to +125C. 56 days. Mechanical Operations: Size 20 contact, male contact - 0.040 inch (1.02mm) diameter. Female contact - closed entry design with stainless steel shroud. 9 lbs. (40 N). 650F (350C) for 10 seconds duration per IEC 512-6. Solder cup contacts - 0.042 inch (1.06mm) minimum hole diameter in solder style contact for 20 AWG (0.5mm 2) wire maximum. Straight Printed Board Mount - 0.028 inch (0.71mm) diameter and 0.024 inch (0.61mm) diameter. 90 Printed Board Mount - 0.028 (0.71mm) diameter for Inch System footprint, and 0.024 (0.61mm) diameter for European Metric footprint. Wrap Post - 0.025 inch (0.64mm) square. Male shells may be dimpled for EMI/ESD ground paths. Trapezoidally shaped shells and polarized jackscrews. Jackscrews and riveted fasteners with 0.120 inch (3.05mm) clearance hole, and threaded riveted fasteners with 4-40 threads and nylon lock inserts. Rapid installation push-on fasteners and mounting posts. Jackscrews and vibration locking systems. 1000 operations minimum per IEC 512-5. MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS HDC Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS CONTACT VARIANTS FACE VIEW OF MALE OR REAR VIEW OF FEMALE HDC 9 HDC 25 HDC 15 HDC 37 HDC 50 STANDARD SHELL ASSEMBLY M K B 0.050 (1.27) 0.010 B1 E D1 D H 0.220 (5.59) Max. C 0.036 (0.91) 0.008 A 10 Typ. G 0.120 (3.05) 0.005 O Mounting hole, two places 0.120 (3.05) 0.010 0.120 (3.05) 0.005 O Mounting hole, two places 0.154 (3.91) O Mounting hole available OPTIONAL SHELLASSEMBLY CONNECTOR VARIANT SIZES HDC 9 M HDC 9 F HDC 15 M HDC 15 F HDC 25 M HDC25 F HDC37 M HDC37 F HDC50 M HDC50 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) B 0.005 OPTIONAL SHELLASSEMBLY WITH UNIVERSAL FLOAT MOUNTS B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) 0.086 (2.18) +0.005 -0.000 O Mounting hole, two places 0.032 (0.81) Total diametral float D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 48 MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS HDC Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS SOLDER CUP CONNECTOR Fixed female jackscrews 20 AWG Max. (0.5mm2) 0.145 (3.68) 0.375 (9.53) Fixed female jackscrew For solder cup contacts, specify code 2 in step 4 of ordering information. Fixed male jackscrew Fixed male and female polarized jackscrews available. Specify code T6 in step 7 of ordering information. Typical Part Number: HDC15M200T6Z Typical Part Number: HDC15M200T2Z STRAIGHT PRINTED BOARD MOUNT CONNECTOR Fixed female jackscrews CODE NUMBER L DO 3 0.170 (4.32) 0.028 (0.71) 32 0.375 (9.53) 0.028 (0.71) 36 0.236 (6.00) 0.024 (0.61) Swaged spacer with push-on fastener phosphor bronze. 0.010 (0.25) Min. 0.225 (5.72) L DO For straight printed board mount contacts, specify code no. in step 4 of ordering information. Typical Part Number: HDC25F3S60T0 WRAP POST CONNECTOR Fixed female jackscrews 0.025 (0.64) Sq. For wrap post contacts, specify code 6 in step 4 of ordering information. 0.720 (18.29) 0.495 (12.57) Typical part number: HDC15F600T0 DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 49 HDC25M6S50T0 MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS HDC Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS 90 PRINTED BOARD MOUNT CONNECTOR CODE 5, 0.283 (7.19) CONTACT EXTENSION C HDC005B3000 0.283 (7.19) CONTACT EXTENSION PART NUMBER Fixed female jackscrews 0.008 B A C D E HDC905B3000 1.204 0.984 (30.58) (24.99) A B 0.339 (8.61) 0.283 (7.19) 0.112 (2.84) HDC1505B3000 1.532 1.312 (38.91) (33.32) 0.339 (8.61) 0.283 (7.19) 0.112 (2.84) HDC2505B3000 2.072 1.852 (52.63) (47.04) 0.339 (8.61) 0.283 (7.19) 0.112 (2.84) HDC3705B3000 2.720 2.500 (69.09) (63.50) 0.339 (8.61) 0.283 (7.19) 0.112 (2.84) HDC5005B3000 2.626 2.406 0.395 (66.70) (61.11) (10.03) 0.283 (7.19) 0.112 (2.84) E Specify code 5 in step 4 of ordering information. E Numbering shown is rear view of male and face view of female. D D E Typical Part Number: HDC25M5R7NT2X 0.028 (0.71) O Typical Part Number: HDC50F5R7NTX 0.160 (4.06) Nominal Push-on fastener beryllium copper 90 PRINTED BOARD MOUNT CONNECTOR C CODE 42, 0.370 (9.40) CONTACT EXTENSION HDC0042B3000 0.370 (9.40) CONTACT EXTENSION PART NUMBER Fixed female jackscrews 0.008 B A Specify code 42 in step 4 of ordering information. D E HDC9042B3000 1.204 0.984 0.420 (30.58) (24.99) (10.67) 0.370 (9.40) 0.100 (2.54) HDC15042B3000 1.532 1.312 0.420 (38.91) (33.32) (10.67) 0.370 (9.40) 0.100 (2.54) HDC25042B3000 2.072 1.852 0.420 (52.63) (47.04) (10.67) 0.370 (9.40) 0.100 (2.54) HDC37042B3000 2.720 2.500 0.420 (69.09) (63.50) (10.67) 0.370 (9.40) 0.100 (2.54) HDC50042B3000 2.626 2.406 0.470 (66.70) (61.11) (11.94) 0.370 (9.40) 0.100 (2.54) 0.125 (3.18) O Typ. D A B C E E Numbering shown is rear view of male and face view of female. D E Typical Part Number: HDC25M42B30T2X 0.024 (0.61) O 0.197 (5.00) Nominal Typical Part Number: HDC50M42B30T2X DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 50 MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS HDC Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS 90 AND STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN Hole identification shown for male connector, use mirror image for female connector. Mount connector with mating face positioned to follow direction of arrows. Sym. Sym. 0.492 (12.50) 0.656 (16.66) 0.216 (5.49) Sym. 0.378 (9.60) 0.054 Typ. (1.37) 0.108 Typ. (2.74) X 0.054 Typ. (1.37) 0.108 Typ. (2.74) 0.162 (4.11) HDC 9 0.926 (23.52) 0.109 Typ. (2.77) X 0.055 Typ. (1.40) 0.324 (8.23) Sym. Sym. 0.978 (24.84) 0.924 (23.47) HDC 37 CODE NUMBER X Y 3 0.112 (2.84) 0.224 (5.69) 5 0.112 (2.84) 0.224 (5.69) 32 0.112 (2.84) 0.224 (5.69) 36 0.112 (2.84) 0.224 (5.69) *42 0.100 (2.54) 0.200 (5.08) *Metric system, European contact hole pattern. DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 51 1.203 (30.56) 0.109 Typ. (2.77) X X 0.055 Typ. (1.40) X 0.598 (15.19) HDC 25 HDC 15 1.250 (31.75) 0.109 Typ. (2.77) 0.652 (16.56) Y 0.055 Typ. (1.40) 0.870 (22.10) 0.815 (20.70) HDC 50 Suggest 0.039 (0.99) O hole for 0.024 (0.61) O contact termination positions. Suggest 0.045 (1.14) O hole for 0.028 (0.71) O contact termination positions. Suggest 0.123 0.003 (3.12) O hole for mounting connector with push-on fasteners. MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS HDC Series FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used STEP 1 2 3 4 5 6 7 8 HDC 37 F 5 B3 0 T 0 9 STEP 1 - Basic Series STEP 9 - Special Options HDC Series Consult Sales Department. STEP 2 - HDC Series Connector Variants STEP 8 - Shell Options 9, 15, 25, 37, 50 0 S X Z C STEP 3 - Connector Gender M - Male F - Female STEP 4 - Type of Contacts - Zinc Plated with Dichromate Seal. - Stainless Steel. - Tin Plated. - Tin Plated and Dimpled. - Cadmium plated with Dichromate Seal *STEP 7 - Locking and Polarizing Systems 2 3 - Solder cup. - Solder, Straight Printed Board Mount with 0.170 (4.32) Tail Length. 32 - Solder, Straight Printed Board Mount with 0.375 (9.52) Tail Length. 36 - Solder, Straight Printed Board Mount with 0.236 (5.99) Tail Length. 42 - Solder, Metric System 90 Printed Board Mount with 0.370 (9.40) Contact Extension. 5 - Solder, 90 Printed Board Mount with 0.283 (7.19) Contact Extension. 6 - Wrap Post. 0 V3 V5 VL T T2 T6 E E2 E6 - None. Lock Tab, connector front panel mounted. Lock Tab, connector rear panel mounted. Lock Lever, used with Hoods Only. Fixed Female Jackscrews. Fixed Female Jackscrews. Fixed Male and Female Polarized Jackscrews. Rotating Male Jackscrews. Rotating Male Screw Locks. Rotating Male and Female Polarized Jackscrews. *STEP 6 - Hoods and Push-On Fasteners *STEP 5 - Mounting Style 0 B3 B8 F P P2 R2 - R6 R7 R8 S S2 S5 S6 - S7 - Mounting Hole, 0.120 (3.05) O. Bracket, Mounting, 90 Metal with Cross Bar. Bracket, Mounting, 90 Plastic with Cross Bar. Float Mounts, Universal. Threaded Post, Brass, 0.225 (5.71) Length. Threaded Post, Nylon, 0.225 (5.71) Length. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Thread Fixed Female Jackscrews with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 0.120 (3.05) O Mounting Hole with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Threads with Cross Bar. Bracket, Mounting, 90 Metal, Swaged to Connector with 4-40 Locknut with Cross Bar. Swaged Spacer, 4-40 Threads, 0.225 (5.71) Length. Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length. Swaged Locknut, 4-40 Threads. Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225 (5.71) Length. Swaged Spacer with Push-on Fastener for use with Ferrite Inductor, 4-40 Threads, 0.375 (9.53) Length. 0 J L Y - Y6 Z - H - G W N **F - None. Hood, Top Opening, Plastic. Hood, Side Opening, Plastic. Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 50 only. Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews. Available in size 50 only. Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic with Rotating Male Jackscrews. Hood, Top Opening, Metal. Available in size 15, 25, 37 and 50 only. Hood, EMI/RFI, Metal. Hood, Top or Side Opening, Plastic. Available is size 9, 15, and 25 only. Push-on Fastener, for 90 Mounting Brackets. Ferrite Inductor. *For additional information on accessories listed in steps 5, 6 and 7, see Accessory Catalog. **Ferrite inductor is available on contact types 32, 36 and 6 only. 52 PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Size 20 Contacts, Fixed Machined Contact, "Bi-Spring" or "Omega" Compliant Termination Repairable Contact Professional Quality IEC 807-2 & IEC 352-5 MIL-STD 2166 U.L. Recognized Telecommunication File #E49351 U.L. File #140980 PCD Series connectors are professional quality rectangular connectors with compliant terminations.The low press-in force required to install the contacts into the board eliminates printed board pressure-warp and twisting stresses which can result in expensive repair or replacement of printed boards and back panels. Female connectors are available with closed entry contacts for high reliability applications. These connectors were designed to allow removal and replacement of individual contacts damaged in manufacturing, testing, or field use without removing the connector from the board. The compliant section of the contact causes no damage or deformation of the plated-through-hole during installation or removal from the printed board. With a minimum axial push-out force of 5 lbs. (21 N), an individual contact may be removed from both the printed board and connector insulator. A virgin contact may then be pushed into the connector insulator and plated-through-hole, thereby accomplishing the repair of the connector without the removal of the connector from the printed board. Bi-Spring Compliant Contacts have press-in and pushout forces of 2 lbs (8.4 N) to 2.5 lbs (10.5 N). The requirement for finished printed board hole diameter is 0.047 inches (1.19 mm). The compliant contact will permit up to three replacement operations. Omega Compliant Contacts have press-in and push-out forces of 4 lbs (16.8 N) to 6 lbs (25.2 N). The requirement for the finished printed board hole diameter is 0.0394 inches (1.00mm). This contact style offers an economically priced connector with a finished hole diameter common to many press fit contacts. Five standard connector variants are offered in arrangement of 9, 15, 25, 37, and 50 contacts. PCD connectors are mateable and compatible with all D-Subminiature connectors conforming to IEC 807-2, IEC 807-3, and dimensional requirements of MIL-DTL-24308. COMPLIANT PRESS-D CONNECTOR TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Repairable Contacts Solid Metal Construction: Contacts: Contact Plating: Shells: Mounting Spacers and Brackets: Jackscrew System: Vibration Lock Systems: Glass filled polyester per MIL-M-24519, U.L. 94V0, blue color. Male and female contacts are precision machined-high tensile phosphor bronze. Professional performance - Gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate or zinc plate with dichromate seal. Brass with tin plate; zinc plate with dichromate seal. Steel; zinc plate with dichromate seal. Lock tabs, nickel plated steel. ELECTRICAL CHARACTERISTICS OF COMPLIANT CONNECTION TO PLATED-THROUGH-HOLE OF PRINTED BOARD: Initial Contact Resistance of Connection: Change in Contact Resistance of Connection after Mechanical, Electrical or Climatic Conditioning: Gas-tight Connections Test: Less than 0.001 ohms per IEC 512-2, Test 2a. Less than 0.001 ohms increase per IEC 512-2, Test 2a. Press-In Force of Contact into plated-through-hole of 0.125 inch (3.18mm) printed board: Push-Out Force of Contact from plated-through-hole of 0.125 inch (3.18mm) printed board: Compliant Termination Omega Construction: 7.5 amperes, nominal. 0.008 ohms maximum per IEC512-2, Test 2a. 1000 V r.m.s. 5 G ohms. Press-In Force of Contact into plated-through-hole of 0.125 inch (3.18mm) printed board: Push-Out Force of Contact from plated-through-hole of 0.125 inch (3.18mm) printed board: Vibration Test per MIL-STD 1344, Method 2005, Test Conditioning: Connector Polarization: 0.039 inch (1.0mm). 300 V. Locking System: Mechanical Operations: Less than 0.001 ohms increase in contact resistance after 1 hour per EIA 364, TP36, Method One. ELECTRICAL CHARACTERISTICS OF CONNECTOR: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: Contact Retention In Insulator: Compliant Termination Bi-Spring Construction: Size 20 contact male - 0.040 inch (1.02mm) diameter: female contact - rugged open-entry design or closed entry design. 5 lbs. (21 N) minimum. 0.053 inch (1.35mm) diameter with 0.034 inch (0.86mm) lead-in diameter. Offered with three termination lengths for 0.063 inch (1.60mm) 0.093 inch (2.36mm) 0.125 (3.18mm) thick print ed boards or back planes. 2.5 lbs. (10.5 N). 2 lbs. (8.4 N). 0.047 inch (1.18mm) diameter with 0.022 inch (0.56mm) lead-in diameter. A single termination length accommodates any thickness printed board or backplane. 4 lbs. (16.8 N). 6 lbs. (25.2 N). No electrical discontinuity of 1 s or greater. Trapezoidal shaped shells and polarized jackscrews. Jackscrews and vibration locking systems. 500 operations per IEC 512-5. CLIMATIC CHARACTERISTICS: 53 Temperature Range: -55C to +125C. PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS PCD CONTACT VARIANTS FACE VIEW OF FEMALE CONNECTOR OR REAR VIEW OF MALE CONNECTOR PCD 9 PCD 15 PCD 25 PCD 37 PCD 50 STANDARD SHELL ASSEMBLY B B1 D1 C H D 0.220 (5.59) Max. 0.036 0.008 (0.910.20) A PCD 9 M PCD 9 F PCD 15 M PCD 15 F PCD 25 M PCD25 F PCD37 M PCD37 F PCD50 M PCD50 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) G K E CONNECTOR VARIANT SIZES 10 Typ. M 0.265 (6.73) B 0.005 B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) "Bi-Spring" Compliant Termination D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) "Omega" Compliant Termination DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 54 PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS BI-SPRING COMPLIANT PRESS-FIT CONNECTOR Fixed female jackscrews SWAGED MOUNTING POST 4-40 THREAD. 0.265 (6.73) 0.225 (5.72) Max. thread length in mounting post 0.053 (1.35) O Contact termination 0.045 (1.14) 0.034 (0.86) O Lead in "A" Termination length Typical Part Number: PCD25F9S0T20 Screw, 4-40 customer supplied For "Bi-Spring" Press-Fit contacts, specify code 9, 92 or 93 in step 4 of ordering information. *CONTACT TERMINATION LENGTH BOARD THICKNESS "A" CONTACT TYPE 0.063 (1.60) 0.153 (3.89) 9 0.093 (2.36) 0.183 (4.65) 92 0.125 (3.18) 0.218 (5.54) 93 Detail of Bi-Spring contacts OMEGA COMPLIANT PRESS-FIT CONNECTOR Fixed female jackscrews SWAGED MOUNTING POST 4-40 THREAD. 0.265 (6.73) 0.225 (5.72) Max. thread length in mounting spacer 0.045 (1.14) 0.047 (1.18)O Contact Termination 0.022 (0.56) O Lead in *0.167 (4.24) Typical Part Number: PCD25F98S0T20 Screw, 4-40 customer supplied For "Omega" Press-Fit contacts, specify code 98 in step 4 of ordering information. Detail of Omega contacts DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. *The effective length of the compliant section may also be varied (longer or shorter) and can be selectively positioned and centered at several points along the contact termination length, permitting high or low profile mounting of the connector on printed boards. 55 PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS COMPLIANT PRESS-FIT CONNECTOR PRINTED BOARD CONTACT HOLE PATTERN For Bi-Spring contact terminations: Suggest hole with 0.0001 (0.003) minimum solder over 0.001 (0.03) minimum copper plate. Final hole size is O 0.0470.002 (1.190.05). For Omega contact terminations: Suggest O 0.04530.0010 (1.1500.025) hole with 0.0005 (0.013) minimum tin or tin/lead over 0.001 (0.03) minimum copper plate. Final hole size is O 0.0394+0.0035-0.0024 (1.000+0.090-0.060). Sym. Sym. 0.492 (12.50) 0.216 (5.49) 0.926 (23.52) 0.108 (2.74) Typ. 0.108 Typ. (2.74) 0.112 (2.84) 0.324 (8.23) 0.162 (4.11) PCD 15 PCD 9 0.652 (16.56) 0.109 Typ. (2.77) 0.054 Typ. (1.37) 0.112 (2.84) 0.054 Typ. (1.37) Sym. 0.378 (9.60) 0.656 (16.66) 0.055 Typ. (1.40) 0.598 (15.19) PCD 25 Sym. Sym. 0.978 (24.84) 1.250 (31.75) 0.112 (2.84) 0.055 Typ. (1.40) PCD 37 0.870 (22.10) 1.203 (30.56) 0.109 Typ. (2.77) Suggest 0.120 (3.05)O hole for mounting connector 0.112 (2.84) 0.112 (2.84) 0.924 (23.47) 0.109 Typ. (2.77) 0.055 Typ. (1.40) 0.224 (5.69) 0.815 (20.70) PCD 50 PCD SERIES PRESS-FIT CONNECTORS INSTALLATION TOOLS 1/2 inch shaft for Arbor press. Replaceable Seating Pins Arbor Press Male Connector Seating Tool (Exploded view) Single Contact Insertion Tool Female Connector Seating Tool (Exploded view) Single Contact Removal Tool Positronic recommended tools for PCD Series Connectors and Contacts Series Connector Seating Male Female PCD 9 9512-1-0-41 9512-6-0-41 PCD 15 9512-2-0-41 9512-7-0-41 PCD 25 9512-3-0-41 9512-8-0-41 PCD 37 9512-4-0-41 9512-9-0-41 PCD 50 9512-5-0-41 9512-10-0-41 Single Contact Insertion Male Female 9512-100-0 FOR ALLSIZES Arbor press for connector seating tools-9530-1-0 Replacement pins for connector seating tools. 9512-101-0 FOR ALL SIZES 1 ton capacity Female - 855-658-0-41 Single Contact Removal 9512-102-0 FOR ALL SIZES 4 inch throat DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 56 PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used 1 2 3 4 5 6 7 8 PCD 25 M 9 S 0 T2 X STEP 9 STEP 1 - Basic Series STEP 9 - Special Options PCD Series Consult Sales Department. STEP 2 - PCD Series Connector Variants STEP 8 - Shell Options 9, 15, 25, 37, 50 0 - Zinc Plated with Dichromate Seal. X - Tin Plated. Z - Tin Plated and Dimpled. STEP 3 - Connector Gender M - Male F - Female FC - Female, Closed Entry STEP 7 - Locking and Polarizing Systems 0 - None. V3 - Lock Tab. T6 - Fixed Male and Female Polarized Jackscrews. T2 - Fixed Female Jackscrews, 4-40 Thread. Note: These options must be ordered with connector and cannot be ordered separately. STEP 4 - Type of Contacts - Compliant Press-Fit 9 92 93 98 - Bi-Spring type compliant, termination length 0.153 (3.89). Bi-Spring type compliant, termination length 0.183 (4.65). Bi-Spring type compliant, termination length 0.218 (5.54). Omega type compliant. STEP 5 - Mounting Style S STEP 6 - Hoods - Swaged Mounting Post 4-40 Threads 0.265 (6,73) Length. 0 - None REPLACEMENT CONTACTS PART NUMBERS CODE MALE OPEN ENTRY FEMALE CLOSED ENTRY FEMALE 9 4305-13-1-* 4306-14-1-* 4306-139-1-* 92 4305-13-2-* 4306-14-2-* 4306-139-2-* 93 4305-13-3-* 4306-14-3-* 4306-139-3-* 98 4305-15-0-* 4306-17-0-* 4306-189-0-* * - PLATING OPTIONS FOR REPLACEMENT CONTACTS -14 GOLD 0.000030 (0.75 MICRONS) OVER NICKEL PLATE -51 GOLD FLASH OVER NICKEL PLATE 57 PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCDD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS Size 22 Contacts Fixed Machined Contact, "Omega" Compliant Termination Repairable Contact Professional Quality IEC 807-2 & IEC 352-5 MIL-STD 2166 U.L. Recognized File #E49351 Telecommunication U.L. File #140980 PCDD Series connectors are professional quality rectangular connectors with compliant termination repairable contacts. The low press-in force required to install the contacts into the board eliminates printed board pressure-warp and twisting stresses which can result in expensive repair or replacement of printed boards and back panels. Female connectors are available with closed entry contacts for high reliability applications. These connectors were designed to allow removal and replacement of individual contacts damaged in manufacturing, testing, or field use without removing the connector from the board. The compliant section of the contact causes no damage or deformation of the plated-through-hole during installation or removal from the printed board. With a minimum axial push-out force of 5 lbs (21 N), an individual contact may be removed from both the printed board and connector insulator and plated-through-hole, thereby accomplishing the repair of the connector without the removal of the connector from the printed board. Omega Compliant Contacts have press-in and push-out forces of 4 lbs (16.8 N) to 6 lbs (25.2 N). The requirement for the finished printed board hole diameter is 0.0394 inch (1.00 mm). This contact style offers an economically priced connector with a finished hole diameter common to many press fit contacts. Six standard connector variants are offered in arrangements of 15, 26, 44, 62, 72, and 104 contacts. PCDD connectors are mateable and compatible with all Subminiature-D connectors conforming to dimensional requirements of MIL-DTL-24308. COMPLIANT PRESS-D CONNECTOR TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: MECHANICAL CHARACTERISTICS: Insulator: Repairable Contacts Solid Metal Construction: Contacts: Contact Plating: Shells: Mounting Spacers and Brackets: Jackscrew System: Vibration Lock Systems: Glass filled polyester per MIL-M-24519, U.L. 94V0, blue color. Male and female contacts are precision machined-high tensile phosphor bronze. Professional performance - Gold flash over nickel plate. Other finishes available upon request. Steel or brass with tin plate or zinc plate with dichromate seal. Brass with tin plate; zinc plate with dichromate seal. Steel; zinc plate with dichromate seal. Lock tabs, nickel plated steel. ELECTRICAL CHARACTERISTICS OF COMPLIANT CONNECTION TO PLATED-THROUGH-HOLE OF PRINTED BOARD: Initial ContactResistance of Connection: Change in Contact Resistance of Connection after Mechanical, Electrical or Climatic Conditioning: Gas-tight Connections Test: Less than 0.001 ohms per IEC 512-2, Test 2a. Less than 0.001 ohms increase per IEC 512-2, Test 2a. Less than 0.001 ohms increase in contact resistance after 1 hour per EIA 364, TP36, Method One. ELECTRICAL CHARACTERISTICS OF CONNECTOR: Contact Current Rating: Initial Contact Resistance: Proof Voltage: Insulator Resistance: Clearance and Creepage Distance (minimum): Working Voltage: Contact Retention In Insulator: Compliant Termination Omega Construction: Press-In Force of Contact into plated-through-hole of 0.125 inch (3.18mm) printed board: Push-Out Force of Contact from plated-through-hole of 0.125 inch (3.18mm) printed board: Vibration Test per MIL-STD 1344, Method 2005, Test Conditioning: Connector Polarization: Locking System: Mechanical Operations: Size 22 contact male - 0.030 inch (0.76 mm) diameter: female contact - rugged open-entry design or closed entry design. 5 lbs. (21 N) minimum. 0.047 inch (1.18mm) diameter with 0.022 inch (0.56mm) lead-in diameter. A single termination length accommodates any thickness printed board or backplane. 4 lbs. (16.8 N). 6 lbs. (25.2 N). No electrical discontinuity of 1 s or greater. Trapezoidal shaped shells and polarized jackscrews. Jackscrews and vibration locking systems. 500 operations per IEC 512-5. CLIMATIC CHARACTERISTICS: Temperature Range: -55C to +125C. 5 amperes, nominal. 0.010 ohms maximum per IEC512-2, Test 2a. 1000 V r.m.s. 5 G ohms. 0.042 inch (1.02 mm). 300 V. 58 PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCDD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS PCDD CONTACT VARIANTS FACE VIEW OF MALE AND REAR VIEW OF FEMALE PCDD 44 PCDD 26 PCDD 15 PCDD 104 PCDD 78 PCDD 62 STANDARD SHELL ASSEMBLY B B1 D1 C H D 0.036 0.008 (0.910.20) A PCDD 15 M PCDD 15 F PCDD 26 M PCDD 26 F PCDD 44 M PCDD44 F PCDD 62 M PCDD62 F PCDD 78 M PCDD78 F PCDD104 M PCDD104 F A 0.015 1.213 (30.81) 1.213 (30.81) 1.541 (39.14) 1.541 (39.14) 2.088 (53.04) 2.088 (53.04) 2.729 (69.32) 2.729 (69.32) 2.635 (66.93) 2.635 (66.93) 2.729 (69.32) 2.729 (69.32) G K E CONNECTOR VARIANT SIZES 10 Typ. M 0.220 (5.59) Max. 0.265 (6.73) B 0.005 B1 0.005 C 0.005 0.666 (16.92) 0.984 (24.99) 0.984 (24.99) 1.312 (33.32) 1.312 (33.32) 1.852 (47.04) 1.852 (47.04) 2.500 (63.50) 2.500 (63.50) 2.406 (61.11) 2.406 (61.11) 2.500 (63.50) 2.500 (63.50) 0.643 (16.33) 0.994 (25.25) 0.971 (24.66) 1.534 (38.96) 1.511 (38.38) 2.182 (55.42) 2.159 (54.84) 2.079 (52.81) 2.064 (52.43) 2.212 (56.18) 2.189 (55.60) D 0.005 D1 0.005 E 0.015 G 0.010 H 0.010 K 0.005 M 0.010 0.329 (8.36) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.494 (12.55) 0.605 (15.37) 0.605 (15.37) 0.668 (16.97) 0.668 (16.97) 0.759 (19.28) 0.759 (19.28) 1.083 (27.51) 1.083 (27.51) 1.625 (41.28) 1.625 (41.28) 2.272 (57.71) 2.272 (57.71) 2.178 (55.32) 2.178 (55.32) 2.302 (58.47) 2.302 (58.47) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.422 (10.72) 0.534 (13.56) 0.534 (13.56) 0.596 (15.14) 0.596 (15.14) 0.233 (5.92) 0.243 (6.17) 0.233 (5.92) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.230 (5.84) 0.243 (6.17) 0.422 (10.72) 0.429 (10.90) 0.422 (10.72) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.426 (10.82) 0.429 (10.90) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.329 (8.36) 0.311 (7.90) 0.441 (11.20) 0.423 (10.74) 0.503 (12.78) 0.485 (12.32) "Omega" Compliant Termination DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. 59 PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCDD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS OMEGA COMPLIANT PRESS-FIT CONNECTOR Fixed female jackscrews SWAGED MOUNTING POST 4-40 THREAD. 0.265 (6.73) 0.225 (5.72) Max. thread length in mounting spacer 0.045 (1.14) O 0.047 (1.18) Contact Termination 0.022 (0.56) O Lead in *0.167 (4.24) Typical Part Number: PCDD44F98S0T020 Screw, 4-40 customer supplied For "Omega" Press-Fit contacts, specify code 98 in step 4 of ordering information. Detail of Omega contacts DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. *The effective length of the compliant section may also be varied (longer or shorter) and can be selectively positioned and centered at several points along the contact termination length, permitting high or low profile mounting of the connector on printed boards. PCDD SERIES PRESS-FIT CONNECTORS INSTALLATION TOOLS 1/2 inch shaft for Arbor press. Male Connector Seating Tool (Exploded view) Replaceable Seating Pins Female Connector Seating Tool (Exploded view) Single Contact Removal Tool Single Contact Insertion Tool Arbor Press Positronic recommended tools for PCDD Series Connectors and Contacts Series Connector Seating Male Female PCDD 15 9512-1-0-41 9512-11-0-41 PCDD 26 9512-2-0-41 9512-12-0-41 PCDD 44 9512-3-0-41 9512-13-0-41 PCDD 62 9512-4-0-41 9512-14-0-41 PCDD 78 9512-5-0-41 9512-15-0-41 PCDD 104 9512-16-0-41 9512-17-0-41 Arbor press for connector seating tools-9530-1-0 Replacement pins for connector seating tools, Single Contact Insertion Male Female 9512-103-0 FOR ALLSIZE 9512-104-0 FOR ALL SIZE 1 ton capacity Single Contact Removal 9512-105-0 FOR ALLSIZE 4 inch throat DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE. Female - 855-751-0-41 60 PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCDD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS COMPLIANT PRESS-FIT CONNECTOR PRINTED BOARD CONTACT HOLE PATTERN 0.984 (24.99) 0.984 (24.99) 0.492 (12.50) 0.078 (1.98) 0.090 (2.29) TYP. PCDD 15 MALE 1.312 (33.32) 0.656 (16.66) 1.312 (33.32) 0.385 (9.78) 0.385 (9.78) 0.078 (1.98) 0.090 (2.29)TYP. PCDD 26 FEMALE 0.078 (1.98) PCDD 26 MALE 1.852 (47.04) 0.926 0.655 (23.52) (16.64) 0.078 (1.98) 0.090 (2.29) TYP. PCDD 44 MALE PCDD 44 FEMALE 0.975 (24.77) 0.975 (24.77) 0.078 (1.98) 0.095 (2.41) TYP. 0.078 (1.98) 0.090 (2.29) TYP. 0.078 (1.98) 2.500 (63.50) 0.078 (1.98) 0.090 (2.29) TYP. 0.655 (16.64) 0.926 (23.52) 0.656 (16.66) 0.078 (1.98) 1.852 (47.04) PCDD 62 FEMALE 1.203 (30.56) PCDD 78 1.250 (31.75) 0.095 (2.41) TYP. 2.500 (63.50) 0.078 (1.98) 0.078 (1.98) 1.203 (30.56) 0.903 (22.94) 0.082 (2.08) 0.082 (2.08) FEMALE 0.082 (2.08) 0.123 (3.12) 0.082 (2.08) 0.095 (2.41) TYP. 0.082 (2.08) PCDD 78 MALE 2.500 (63.50) 0.967 (24.56) 0.967 (24.56) 0.082 (2.08) TYP. 1.250 (31.75) PCDD 104 MALE O1.500.025 (0.04530.0010) Drilled Hole 25 (0.0010) Minimum Copper Plate Thickness O1.000+0.090-0.060 (0.0394+0.0035-0.0024) Finished Hole CONTACT HOLE DIAMETERS 0.082 (2.08) 0.082 (2.08) TYP. 0.095 (2.41) TYP. 15 (0.0005) Minimum Tin or Tin-Lead Plate Thickness 61 0.078 (1.98) 2.406 (61.11) PCDD 104 FEMALE Suggest O 0.120 (3.05) Mounting hole size 1.250 (31.75) PCDD 62 MALE 0.903 (22.94) 0.123 (3.12) 2.500 (63.50) 0.078 (1.98) 0.090 (2.29) TYP. 2.406 (61.11) 0.095 (2.41) TYP. 0.078 (1.98) 0.078 (1.98) 0.090 (2.29) TYP. 0.078 (1.98) PCDD 15 FEMALE 1.250 (31.75) 0.492 (12.50) 0.215 (5.46) 0.215 (5.46) PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS PCDD Series FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS ORDERING INFORMATION - CODE NUMBERING SYSTEM Specify Complete Connector By Following Steps 1 Through 9 Insert "0" When Step Is Not Used 1 2 3 4 5 6 7 8 PCDD 26 M 98 S 0 T2 X STEP 9 STEP 1 - Basic Series STEP 9 - Special Options PCDD Series Consult Sales Department. STEP 2 - PCDD Series Connector Variants STEP 8 - Shell Options 15, 26, 44, 62, 78, 104 0 - Zinc Plated with Dichromate Seal. X - Tin Plated. Z - Tin Plated and Dimpled. STEP 3 - Connector Gender M - Male F - Female FC - Female, Closed Entry STEP 7 - Locking and Polarizing Systems 0 - None. V3 - Lock Tab. T6 - Fixed Male and Female Polarized Jackscrews. T2 - Fixed Female Jackscrews, 4-40 Thread. Note: These options must be ordered with connector and cannot be ordered separately. STEP 4 - Type of Contacts 98 - Omega type compliant. STEP 5 - Mounting Style S - Swaged Mounting Post 4-40 Threads 0.265 (6,73) Length. STEP 6 - Hoods 0 - None REPLACEMENT CONTACTS PART NUMBERS MALE OPEN ENTRY FEMALE CLOSED ENTRY FEMALE 4803-21-0-* 4804-25-0-* 4804-249-0-* * - PLATING OPTIONS FOR REPLACEMENT CONTACTS -14 GOLD 0.000030 (0.75 MICRONS) OVER NICKEL PLATE -51 GOLD FLASH OVER NICKEL PLATE 62 MIL-DTL-24308/MIL-C-39029/MIL-C-85049 QUALIFIED PRODUCTS LISTING Q.P.L. CONNECTORS Positronic Industries offers the following listing of connectors and connector accessories, which are products qualified under Military Specification MIL-DTL-24308, MIL-C-39029 and MIL-C-85049. For additional Q.P.L. connectors, please consult the factory sales office. MILITARY PART NUMBER M24308/1-1 M24308/1-1F M24308/1-2 M24308/1-2F M24308/1-3 M24308/1-3F M24308/1-4 M24308/1-4F M24308/1-5 M24308/1-5F M24308/1-23 M24308/1-23F M24308/1-24 M24308/1-24F M24308/1-25 M24308/1-25F M24308/1-26 M24308/1-26F M24308/1-27 M24308/1-27F M24308/1-34 M24308/1-35 M24308/1-36 M24308/1-37 M24308/1-38 M24308/1-56 M24308/1-57 M24308/1-58 M24308/1-59 M24308/1-60 M24308/2-1 M24308/2-1F M24308/2-2 M24308/2-2F M24308/2-3 M24308/2-3F M24308/2-4 M24308/2-4F M24308/2-5 M24308/2-5F M24308/2-6 M24308/2-6F M24308/2-7 M24308/2-7F M24308/2-8 M24308/2-8F M24308/2-9 M24308/2-9F M24308/2-10 M24308/2-10F M24308/2-11 M24308/2-11F M24308/2-12 M24308/2-12F M24308/2-13 M24308/2-13F M24308/2-14 M24308/2-14F M24308/2-15 M24308/2-15F M24308/2-16 M24308/2-16F M24308/2-17 M24308/2-17F M24308/2-18 M24308/2-18F M24308/2-19 M24308/2-19F M24308/2-20 M24308/2-20F M24308/2-21 M24308/2-21F M24308/2-22 M24308/2-22F M24308/2-281 M24308/2-281F M24308/2-282 M24308/2-282F M24308/2-283 M24308/2-283F M24308/2-284 M24308/2-284F M24308/2-285 M24308/2-285F POSITRONIC * PART NUMBER HDC9F20000-50 HDC9F2000C-50 HDC15F20000-50 HDC15F2000C-50 HDC25F20000-50 HDC25F2000C-50 HDC37F20000-50 HDC37F2000C-50 HDC50F20000-50 HDC50F2000C-50 HDC9F2F000-50 HDC9F2F00C-50 HDC15F2F000-50 HDC15F2F00C-50 HDC25F2F000-50 HDC25F2F00C-50 HDC37F2F000-50 HDC37F2F00C-50 HDC50F2F000-50 HDC50F2F00C-50 HDC9F20000-50-799.0 HDC15F20000-50-799.0 HDC25F20000-50-799.0 HDC37F20000-50-799.0 HDC50F20000-50-799.0 HDC9F2F000-50-799.2 HDC15F2F000-50-799.2 HDC25F2F000-50-799.2 HDC37F2F000-50-799.2 HDC50F2F000-50-799.2 RD9F10000-50 RD9F1000C-50 RD15F10000-50 RD15F1000C-50 RD25F10000-50 RD25F1000C-50 RD37F10000-50 RD37F1000C-50 RD50F10000-50 RD50F1000C-50 RD9F10000-50-400.0 RD9F1000C-50-400.0 RD15F10000-50-400.0 RD15F1000C-50-400.0 RD25F10000-50-400.0 RD25F1000C-50-400.0 RD37F10000-50-400.0 RD37F1000C-50-400.0 RD50F10000-50-400.0 RD50F1000C-50-400.0 DD15F10000-50 DD15F1000C-50 DD26F10000-50 DD26F1000C-50 DD44F10000-50 DD44F1000C-50 DD62F10000-50 DD62F1000C-50 DD78F10000-50 DD78F1000C-50 DD104F10000-50 DD104F1000C-50 DD15F10000-50-400.1 DD15F1000C-50-400.1 DD26F10000-50-400.1 DD26F1000C-50-400.1 DD44F10000-50-400.1 DD44F1000C-50-400.1 DD62F10000-50-400.1 DD62F1000C-50-400.1 DD78F10000-50-400.1 DD78F1000C-50-400.1 DD104F10000-50-400.1 DD104F1000C-50-400.1 RD9F00000 RD9F0000C RD15F00000 RD15F0000C RD25F00000 RD25F0000C RD37F00000 RD37F0000C RD50F00000 RD50F0000C MILITARY PART NUMBER M24308/2-286 M24308/2-286F M24308/2-287 M24308/2-287F M24308/2-288 M24308/2-288F M24308/2-289 M24308/2-289F M24308/2-290 M24308/2-290F M24308/2-291 M24308/2-291F M24308/2-342 M24308/2-342F M24308/2-343 M24308/2-343F M24308/2-344 M24308/2-344F M24308/2-345 M24308/2-345F M24308/2-346 M24308/2-346F M24308/2-347 M24308/2-347F M24308/2-348 M24308/2-348F M24308/2-349 M24308/2-349F M24308/2-350 M24308/2-350F M24308/2-351 M24308/2-351F M24308/2-352 M24308/2-352F M24308/2-353 M24308/2-353F M24308/2-354 M24308/2-354F M24308/2-355 M24308/2-355F M24308/2-356 M24308/2-356F M24308/2-357 M24308/2-357F M24308/2-358 M24308/2-358F M24308/2-359 M24308/2-359F M24308/2-360 M24308/2-360F M24308/2-361 M24308/2-361F M24308/2-362 M24308/2-362F M24308/2-363 M24308/2-363F M24308/2-482 M24308/2-482F M24308/2-483 M24308/2-483F M24308/2-484 M24308/2-484F M24308/2-485 M24308/2-485F M24308/2-486 M24308/2-486F M24308/2-487 M24308/2-487F M24308/2-488 M24308/2-488F M24308/2-489 M24308/2-489F M24308/2-490 M24308/2-490F M24308/2-491 M24308/2-491F M24308/2-492 M24308/2-492F M24308/2-516 M24308/2-517 M24308/2-518 M24308/2-519 M24308/2-520 M24308/2-521 POSITRONIC * PART NUMBER DD15F00000 DD15F0000C DD26F00000 DD26F0000C DD44F00000 DD44F0000C DD62F00000 DD62F0000C DD78F00000 DD78F0000C DD104F00000 DD104F0000C RD9F1F000-50 RD9F1F00C-50 RD15F1F000-50 RD15F1F00C-50 RD25F1F000-50 RD25F1F00C-50 RD37F1F000-50 RD37F1F00C-50 RD50F1F000-50 RD50F1F00C-50 DD15F1F000-50 DD15F1F00C-50 DD26F1F000-50 DD26F1F00C-50 DD44F1F000-50 DD44F1F00C-50 DD62F1F000-50 DD62F1F00C-50 DD78F1F000-50 DD78F1F00C-50 DD104F1F000-50 DD104F1F00C-50 RD9F1F000-50-400.0 RD9F1F00C-50-400.0 RD15F1F000-50-400.0 RD15F1F00C-50-400.0 RD25F1F000-50-400.0 RD25F1F00C-50-400.0 RD37F1F000-50-400.0 RD37F1F00C-50-400.0 RD50F1F000-50-400.0 RD50F1F00C-50-400.0 DD15F1F000-50-400.1 DD15F1F00C-50-400.1 DD26F1F000-50-400.1 DD26F1F00C-50-400.1 DD44F1F000-50-400.1 DD44F1F00C-50-400.1 DD62F1F000-50-400.1 DD62F1F00C-50-400.1 DD78F1F000-50-400.1 DD78F1F00C-50-400.1 DD104F1F000-50-400.1 DD104F1F00C-50-400.1 RD9F0F000 RD9F0F00C RD15F0F000 RD15F0F00C RD25F0F000 RD25F0F00C RD37F0F000 RD37F0F00C RD50F0F000 RD50F0F00C DD15F0F000 DD15F0F00C DD26F0F000 DD26F0F00C DD44F0F000 DD44F0F00C DD62F0F000 DD62F0F00C DD78F0F000 DD78F0F00C DD104F0F000 DD104F0F00C RD9F10000-50-799.0 RD15F10000-50-799.0 RD25F10000-50-799.0 RD37F10000-50-799.0 RD50F10000-50-799.0 RD9F10000-50-799.1 MILITARY PART NUMBER M24308/2-522 M24308/2-523 M24308/2-524 M24308/2-525 M24308/2-526 M24308/2-527 M24308/2-528 M24308/2-529 M24308/2-530 M24308/2-531 M24308/2-532 M24308/2-533 M24308/2-534 M24308/2-535 M24308/2-536 M24308/2-537 M24308/2-560 M24308/2-561 M24308/2-562 M24308/2-563 M24308/2-564 M24308/2-565 M24308/2-566 M24308/2-567 M24308/2-568 M24308/2-569 M24308/2-570 M24308/2-585 M24308/2-586 M24308/2-587 M24308/2-588 M24308/2-589 M24308/2-590 M24308/2-591 M24308/2-592 M24038/2-593 M24308/2-594 M24308/2-595 M24308/2-596 M24308/2-597 M24308/2-598 M24308/2-599 M24308/2-600 M24308/2-601 M24308/2-602 M24308/2-603 M24308/2-604 M24308/2-605 M24308/2-606 M24308/2-607 M24308/2-608 M24308/2-609 M24308/2-610 M24308/2-611 M24308/2-612 M24308/2-613 M24308/2-614 M24308/2-615 M24308/2-616 M24308/2-617 M24308/3-1 M24308/3-1F M24308/3-2 M24308/3-2F M24308/3-3 M24308/3-3F M24308/3-4 M24308/3-4F M24308/3-5 M24308/3-5F M24308/3-12 M24308/3-12F M24308/3-13 M24308/3-13F M24308/3-14 M24308/3-14F M24308/3-15 M24308/3-15F M24308/3-16 M24308/3-16F M24308/3-17 M24308/3-17F M24308/3-18 M24308/3-18F POSITRONIC * PART NUMBER RD15F10000-50-799.1 RD25F10000-50-799.1 RD37F10000-50-799.1 RD50F10000-50-799.1 DD15F10000-50-799.0 DD26F10000-50-799.0 DD44F10000-50-799.0 DD62F10000-50-799.0 DD78F10000-50-799.0 DD104F10000-50-799.0 DD15F10000-50-799.1 DD26F10000-50-799.1 DD44F10000-50-799.1 DD62F10000-50-799.1 DD78F10000-50-799.1 DD104F10000-50-799.1 RD9F00000-799.0 RD15F00000-799.0 RD25F00000-799.0 RD37F00000-799.0 RD50F00000-799.0 DD15F00000-799.0 DD26F00000-799.0 DD44F00000-799.0 DD62F00000-799.0 DD78F00000-799.0 DD104F00000-799.0 RD9F1F000-50-799.2 RD15F1F000-50-799.2 RD25F1F000-50-799.2 RD37F1F000-50-799.2 RD50F1F000-50-799.2 DD15F1F000-50-799.2 DD26F1F000-50-799.2 DD44F1F000-50-799.2 DD62F1F000-50-799.2 DD78F1F000-50-799.2 DD104F1F000-50-799.2 RD9F1F000-50-799.3 RD15F1F000-50-799.3 RD25F1F000-50-799.3 RD37F1F000-50-799.3 RD50F1F000-50-799.3 DD15F1F000-50-799.3 DD26F1F000-50-799.3 DD44F1F000-50-799.3 DD62F1F000-50-799.3 DD78F1F000-50-799.3 DD104F1F000-50-799.3 RD9F0F000-799.2 RD15F0F000-799.2 RD25F0F000-799.2 RD37F0F000-799.2 RD50F0F000-799.2 DD15F0F000-799.2 DD26F0F000-799.2 DD44F0F000-799.2 DD62F0F000-799.2 DD78F0F000-799.2 DD104F0F000-799.2 HDC9M20000-50 HDC9M2000C-50 HDC15M20000-50 HDC15M2000C-50 HDC25M20000-50 HDC25M2000C-50 HDC37M20000-50 HDC37M2000C-50 HDC50M20000-50 HDC50M2000C-50 HDC9M2F000-50 HDC9M2F00C-50 HDC15M2F000-50 HDC15M2F00C-50 HDC25M2F000-50 HDC25M2F00C-50 HDC37M2F000-50 HDC37M2F00C-50 HDC50M2F000-50 HDC50M2F00C-50 HDC9M2F000-50 HDC9M2F00C-50 HDC15M2F000-50 HDC15M2F00C-50 MILITARY PART NUMBER M24308/3-19 M24308/3-19F M24308/3-20 M24308/3-20F M24308/3-21 M24308/3-21F M24308/3-23 M24308/3-24 M24308/3-25 M24308/3-26 M24308/3-27 M24308/3-39 M24308/3-40 M24308/3-41 M24308/3-42 M24308/3-43 M24308/4-1 M24308/4-1F M24308/4-2 M24308/4-2F M24308/4-3 M24308/4-3F M24308/4-4 M24308/4-4F M24308/4-5 M24308/4-5F M24308/4-6 M24308/4-6F M24308/4-7 M24308/4-7F M24308/4-8 M24308/4-8F M24308/4-9 M24308/4-9F M24308/4-10 M24308/4-10F M24308/4-11 M24308/4-11F M24308/4-12 M24308/4-12F M24308/4-13 M24308/4-13F M24308/4-14 M24308/4-14F M24308/4-15 M24308/4-15F M24308/4-16 M24308/4-16F M24308/4-17 M24308/4-17F M24308/4-18 M24308/4-18F M24308/4-19 M24308/4-19F M24308/4-20 M24308/4-20F M24308/4-21 M24308/4-21F M24308/4-22 M24308/4-22F M24308/4-259 M24308/4-259F M24308/4-260 M24308/4-260F M24308/4-261 M24308/4-261F M24308/4-262 M24308/4-262F M24308/4-263 M24308/4-263F M24308/4-264 M24308/4-264F M24308/4-265 M24308/4-265F M24308/4-266 M24308/4-266F M24308/4-267 M24308/4-267F M24308/4-268 M24308/4-268F M24308/4-269 M24308/4-269F M24308/4-302 M24308/4-302F *NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only. 63 POSITRONIC * PART NUMBER HDC25M2F000-50 HDC25M2F00C-50 HDC37M2F000-50 HDC37M2F00C-50 HDC50M2F000-50 HDC50M2F00C-50 HDC9M20000-50-799.0 HDC15M20000-50-799.0 HDC25M20000-50-799.0 HDC37M20000-50-799.0 HDC50M20000-50-799.0 HDC9M2F000-50-799.2 HDC15M2F000-50-799.2 HDC25M2F000-50-799.2 HDC37M2F000-50-799.2 HDC50M2F000-50-799.2 RD9M10000-50 RD9M1000C-50 RD15M10000-50 RD15M1000C-50 RD25M10000-50 RD25M1000C-50 RD37M10000-50 RD37M1000C-50 RD50M10000-50 RD50M1000C-50 RD9M10000-50-400.0 RD9M1000C-50-400.0 RD15M10000-50-400.0 RD15M1000C-50-400.0 RD25M10000-50-400.0 RD25M1000C-50-400.0 RD37M10000-50-400.0 RD37M1000C-50-400.0 RD50M10000-50-400.0 RD50M1000C-50-400.0 DD15M10000-50 DD15M1000C-50 DD26M10000-50 DD26M1000C-50 DD44M10000-50 DD44M1000C-50 DD62M10000-50 DD62M1000C-50 DD78M10000-50 DD78M1000C-50 DD104M10000-50 DD104M1000C-50 DD15M10000-50-400.1 DD15M1000C-50-400.1 DD26M10000-50-400.1 DD26M1000C-50-400.1 DD44M10000-50-400.1 DD44M1000C-50-400.1 DD62M10000-50-400.1 DD62M1000C-50-400.1 DD78M10000-50-400.1 DD78M1000C-50-400.1 DD104M10000-50-400.1 DD104M1000C-50-400.1 RD9M00000 RD9M0000C RD15M00000 RD15M0000C RD25M00000 RD25M0000C RD37M00000 RD37M0000C RD50M00000 RD50M0000C DD15M00000 DD15M0000C DD26M00000 DD26M0000C DD44M00000 DD44M0000C DD62M00000 DD62M0000C DD78M00000 DD78M0000C DD104M00000 DD104M0000C RD9M1F000-50 RD9M1F00C-50 MIL-DTL-24308/MIL-C-39029/MIL-C-85049 QUALIFIED PRODUCTS LISTING Q.P.L. CONNECTORS Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85. Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84. Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308-117-89. Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85. Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79. MILITARY PART NUMBER M24308/4-303 M24308/4-303F M24308/4-304 M24308/4-304F M24308/4-305 M24308/4-305F M24308/4-306 M24308/4-306F M24308/4-313 M24308/4-313F M24308/4-314 M24308/4-314F M24308/4-315 M24308/4-315F M24308/4-316 M24308/4-316F M24308/4-317 M24308/4-317F M24308/4-324 M24308/4-324F M24308/4-325 M24308/4-325F M24308/4-326 M24308/4-326F M24308/4-327 M24308/4-327F M24308/4-328 M24308/4-328F M24308/4-335 M24308/4-336 M24308/4-337 M24308/4-338 M24308/4-339 M24308/4-340 M24308/4-341 M24308/4-342 M24308/4-343 M24308/4-344 M24308/4-345 M24308/4-346 M24308/4-347 M24308/4-348 M24308/4-349 M24308/4-350 M24308/4-351 M24308/4-352 M24308/4-353 M24308/4-354 M24308/4-355 M24308/4-356 M24308/4-357 M24308/4-358 M24308/4-359 M24308/4-360 M24308/4-361 M24308/4-362 M24308/4-363 M24308/4-364 M24308/4-365 M24308/4-366 M24308/4-367 M24308/4-401 M24308/4-402 M24308/4-403 M24308/4-404 M24308/4-405 M24308/4-406 M24308/4-407 M24308/4-408 M24308/4-409 M24308/4-410 M24308/4-411 M24308/4-412 M24308/4-413 M24308/4-414 M24308/4-415 M24308/4-416 M24308/4-417 M24308/4-418 POSITRONIC * PART NUMBER RD15M1F000-50 RD15M1F00C-50 RD25M1F000-50 RD25M1F00C-50 RD37M1F000-50 RD37M1F00C-50 RD50M1F000-50 RD50M1F00C-50 RD9M1F000-50-400.0 RD9M1F00C-50-400.0 RD15M1F000-50-400.0 RD15M1F00C-50-400.0 RD25M1F000-50-400.0 RD25M1F00C-50-400.0 RD37M1F000-50-400.0 RD37M1F00C-50-400.0 RD50M1F000-50-400.0 RD50M1F00C-50-400.0 RD9M0F000 RD9M0F00C RD15M0F000 RD15M0F00C RD25M0F000 RD25M0F00C RD37M0F000 RD37M0F00C RD50M0F000 RD50M0F00C RD9M10000-50-799.0 RD15M10000-50-799.0 RD25M10000-50-799.0 RD37M10000-50-799.0 RD50M10000-50-799.0 RD9M10000-50-799.1 RD15M10000-50-799.1 RD25M10000-50-799.1 RD37M10000-50-799.1 RD50M10000-50-799.1 DD15M10000-50-799.0 DD26M10000-50-799.0 DD44M10000-50-799.0 DD62M10000-50-799.0 DD78M10000-50-799.0 DD104M10000-50-799.0 DD15M10000-50-799.1 DD26M10000-50-799.1 DD44M10000-50-799.1 DD62M10000-50-799.1 DD78M10000-50-799.1 DD104M10000-50-799.1 RD9M00000-799.0 RD15M00000-799.0 RD25M00000-799.0 RD37M00000-799.0 RD50M00000-799.0 DD15M00000-799.0 DD26M00000-799.0 DD44M00000-799.0 DD62M00000-799.0 DD78M00000-799.0 DD104M00000-799.0 RD9M1F000-50-799.2 RD15M1F000-50-799.2 RD25M1F000-50-799.2 RD37M1F000-50-799.2 RD50M1F000-50-799.2 DD15M1F000-50-799.2 DD26M1F000-50-799.2 DD44M1F000-50-799.2 DD62M1F000-50-799.2 DD78M1F000-50-799.2 DD104M1F000-50-799.2 RD9M1F000-50-799.3 RD15M1F000-50-799.3 RD25M1F000-50-799.3 RD37M1F000-50-799.3 RD50M1F000-50-799.3 DD15M1F000-50-799.3 DD26M1F000-50-799.3 MILITARY PART NUMBER M24308/4-419 M24308/4-420 M24308/4-421 M24308/4-422 M24308/4-423 M24308/4-424 M24308/4-425 M24308/4-426 M24308/4-427 M24308/4-428 M24308/4-429 M24308/4-430 M24308/4-431 M24308/4-432 M24308/4-433 M24308/4-435 M24308/4-435F M24308/4-436 M24308/4-436F M24308/4-437 M24308/4-437F M24308/4-438 M24308/4-438F M24308/4-439 M24308/4-439F M24308/4-440 M24308/4-440F M24308/4-441 M24308/4-441F M24308/4-442 M24308/4-442F M24308/4-443 M24308/4-443F M24308/4-444 M24308/4-444F M24308/4-445 M24308/4-445F M24308/4-446 M24308/4-446F M24308/4-447 M24308/4-447F M24308/4-448 M24308/4-448F M24308/4-449 M24308/4-449F M24308/4-450 M24308/4-450F M24308/4-451 M24308/4-451F M24308/4-452 M24308/4-452F M24308/4-453 M24308/4-453F M24308/4-454 M24308/4-454F M24308/4-455 M24308/4-455F M24308/4-456 M24308/4-456F M24308/4-457 M24308/4-457F M24308/4-458 M24308/4-458F M24308/4-459 M24308/4-459F M24308/4-460 M24308/4-460F M24308/4-461 M24308/4-461F M24308/4-462 M24308/4-462F M24308/4-463 M24308/4-463F M24308/4-464 M24308/4-464F M24308/4-465 M24308/4-465F M24308/4-466 M24308/4-466F POSITRONIC * PART NUMBER DD44M1F000-50-799.3 DD62M1F000-50-799.3 DD78M1F000-50-799.3 DD104M1F000-50-799.3 RD9M0F000-799.2 RD15M0F000-799.2 RD25M0F000-799.2 RD37M0F000-799.2 RD50M0F000-799.2 DD15M0F000-799.2 DD26M0F000-799.2 DD44M0F000-799.2 DD62M0F000-799.2 DD78M0F000-799.2 DD104M0F000-799.2 RD9M1F000-50 RD9M1F00C-50 RD15M1F000-50 RD15M1F00C-50 RD25M1F000-50 RD25M1F00C-50 RD37M1F000-50 RD37M1F00C-50 RD50M1F000-50 RD50M1F00C-50 DD15M10000-50 DD15M1000C-50 DD26M10000-50 DD26M1000C-50 DD44M10000-50 DD44M1000C-50 DD62M10000-50 DD62M1000C-50 DD78M10000-50 DD78M1000C-50 DD104M10000-50 DD104M1000C-50 RD9M1F000-50-400.0 RD9M1F00C-50-400.0 RD15M1F000-50-400.0 RD15M1F00C-50-400.0 RD25M1F000-50-400.0 RD25M1F00C-50-400.0 RD37M1F000-50-400.0 RD37M1F00C-50-400.0 RD50M1F000-50-400.0 RD50M1F00C-50-400.0 DD15M1F000-50-400.1 DD15M1F00C-50-400.1 DD26M1F000-50-400.1 DD26M1F00C-50-400.1 DD44M1F000-50-400.1 DD44M1F00C-50-400.1 DD62M1F000-50-400.1 DD62M1F00C-50-400.1 DD78M1F000-50-400.1 DD78M1F00C-50-400.1 DD104M1F000-50-400.1 DD104M1F00C-50-400.1 RD9M0F000 RD9M0F00C RD15M0F000 RD15M0F00C RD25M0F000 RD25M0F00C RD37M0F000 RD37M0F00C RD50M0F000 RD50M0F00C DD15M0F000 DD15M0F00C DD26M0F000 DD26M0F00C DD44M0F000 DD44M0F00C DD62M0F000 DD62M0F00C DD78M0F000 DD78M0F00C MILITARY PART NUMBER M24308/4-467 M24308/4-467F M24308/5-1 M24308/5-1F M24308/5-1P M24308/5-2 M24308/5-2F M24308/5-2P M24308/5-3 M24308/5-3F M24308/5-3P M24308/5-4 M24308/5-4F M24308/5-4P M24308/5-5 M24308/5-5F M24308/5-5P M24308/5-23 M24308/5-23F M24308/5-23P M24308/5-24 M24308/5-24F M24308/5-24P M24308/5-25 M24308/5-25F M24308/5-25P M24308/5-26 M24308/5-26F M24308/5-26P M24308/5-27 M24308/5-27F M24308/5-27P M24308/5-34 M24308/5-35 M24308/5-36 M24308/5-37 M24308/5-38 M24308/5-56 M24308/5-57 M24308/5-58 M24308/5-59 M24308/5-60 M24308/6-1 M24308/6-1F M24308/6-1P M24308/6-2 M24308/6-2F M24308/6-2P M24308/6-3 M24308/6-3F M24308/6-3P M24308/6-4 M24308/6-4F M24308/6-4P M24308/6-5 M24308/6-5F M24308/6-5P M24308/6-6 M24308/6-6F M24308/6-6P M24308/6-7 M24308/6-7F M24308/6-7P M24308/6-8 M24308/6-8F M24308/6-8P M24308/6-9 M24308/6-9F M24308/6-9P M24308/6-10 M24308/6-10F M24308/6-10P M24308/6-11 M24308/6-11F M24308/6-11P M24308/6-12 M24308/6-12F M24308/6-12P M24308/6-13 POSITRONIC * PART NUMBER DD104M0F000 DD104M0F00C HDC9F20000-50-403.0 HDC9F2000C-50-403.0 HDC9F2000S-50 HDC15F20000-50-403.0 HDC15F2000C-50-403.0 HDC15F2000S-50 HDC25F20000-50-403.0 HDC25F2000C-50-403.0 HDC25F2000S-50 HDC37F20000-50-403.0 HDC37F2000C-50-403.0 HDC37F2000S-50 HDC50F20000-50-403.0 HDC50F2000C-50-403.0 HDC50F2000S-50 HDC9F2F000-50-403.0 HDC9F2F00C-50-403.0 HDC9F2F00S-50 HDC15F2F000-50-403.0 HDC15F2F00C-50-403.0 HDC15F2F00S-50 HDC25F2F000-50-403.0 HDC25F2F00C-50-403.0 HDC25F2F00S-50 HDC37F2F000-50-403.0 HDC37F2F00C-50-403.0 HDC37F2F00S-50 HDC50F2F000-50-403.0 HDC50F2F00C-50-403.0 HDC50F2F00S-50 HDC9F20000-50-403.3 HDC15F20000-50-403.3 HDC25F20000-50-403.3 HDC37F20000-50-403.3 HDC50F20000-50-403.3 HDC9F2F000-50-403.4 HDC15F2F000-50-403.4 HDC25F2F000-50-403.4 HDC37F2F000-50-403.4 HDC50F2F000-50-403.4 RD9F10000-50-403.0 RD9F1000C-50-403.0 RD9F1000S-50 RD15F10000-50-403.0 RD15F1000C-50-403.0 RD15F1000S-50 RD25F10000-50-403.0 RD25F1000C-50-403.0 RD25F1000S-50 RD37F10000-50-403.0 RD37F1000C-50-403.0 RD37F1000S-50 RD50F10000-50-403.0 RD50F1000C-50-403.0 RD50F1000S-50 RD9F10000-50-403.1 RD9F1000C-50-403.1 RD9F1000S-50-400.0 RD15F10000-50-403.1 RD15F1000C-50-403.1 RD15F1000S-50-400.0 RD25F10000-50-403.1 RD25F1000C-50-403.1 RD25F1000S-50-400.0 RD37F10000-50-403.1 RD37F1000C-50-403.1 RD37F1000S-50-400.0 RD50F10000-50-403.1 RD50F1000C-50-403.1 RD50F1000S-50-400.0 DD15F10000-50-403.0 DD15F1000C-50-403.0 DD15F1000S-50 DD26F10000-50-403.0 DD26F1000C-50-403.0 DD26F1000S-50 DD44F10000-50-403.0 MILITARY PART NUMBER M24308/6-13F M24308/6-13P M24308/6-14 M24308/6-14F M24308/6-14P M24308/6-15 M24308/6-15F M24308/6-15P M24308/6-16 M24308/6-16F M24308/6-16P M24308/6-17 M24308/6-17F M24308/6-17P M24308/6-18 M24308/6-18F M24308/6-18P M24308/6-19 M24308/6-19F M24308/6-19P M24308/6-20 M24308/6-20F M24308/6-20P M24308/6-21 M24308/6-21F M24308/6-21P M24308/6-22 M24308/6-22F M24308/6-22P M24308/6-281 M24308/6-281F M24308/6-281P M24308/6-282 M24308/6-282F M24308/6-282P M24308/6-283 M24308/6-283F M24308/6-283P M24308/6-284 M24308/6-284F M24308/6-284P M24308/6-285 M24308/6-285F M24308/6-285P M24308/6-286 M24308/6-286F M24308/6-286P M24308/6-287 M24308/6-287F M24308/6-287P M24308/6-288 M24308/6-288F M24308/6-288P M24308/6-289 M24308/6-289F M24308/6-289P M24308/6-290 M24308/6-290F M24308/6-290P M24308/6-291 M24308/6-291F M24308/6-291P M24308/6-453 M24308/6-453F M24308/6-453P M24308/6-454 M24308/6-454F M24308/6-454P M24308/6-455 M24308/6-455F M24308/6-455P M24308/6-456 M24308/6-456F M24308/6-456P M24308/6-457 M24308/6-457F M24308/6-457P M24308/6-458 M24308/6-458F POSITRONIC * PART NUMBER DD44F1000C-50-403.0 DD44F1000S-50 DD62F10000-50-403.0 DD62F1000C-50-403.0 DD62F1000S-50 DD78F10000-50-403.0 DD78F1000C-50-403.0 DD78F1000S-50 DD104F10000-50-403.0 DD104F1000C-50-403.0 DD104F1000S-50 DD15F10000-50-403.2 DD15F1000C-50-403.2 DD15F1000S-50-400.1 DD26F10000-50-403.2 DD26F1000C-50-403.2 DD26F1000S-50-400.1 DD44F10000-50-403.2 DD44F1000C-50-403.2 DD44F1000S-50-400.1 DD62F10000-50-403.2 DD62F1000C-50-403.2 DD62F1000S-50-400.1 DD78F10000-50-403.2 DD78F1000C-50-403.2 DD78F1000S-50-400.1 DD104F10000-50-403.2 DD104F1000C-50-403.2 DD104F1000S-50-400.1 RD9F00000-403.0 RD9F0000C-403.0 RD9F0000S RD15F00000-403.0 RD15F0000C-403.0 RD15F0000S RD25F00000-403.0 RD25F0000C-403.0 RD25F0000S RD37F00000-403.0 RD37F0000C-403.0 RD37F0000S RD50F00000-403.0 RD50F0000C-403.0 RD50F0000S DD15F00000-403.0 DD15F0000C-403.0 DD15F0000S DD26F00000-403.0 DD26F0000C-403.0 DD26F0000S DD44F00000-403.0 DD44F0000C-403.0 DD44F0000S DD62F00000-403.0 DD62F0000C-403.0 DD62F0000S DD78F00000-403.0 DD78F0000C-403.0 DD78F0000S DD104F00000-403.0 DD104F0000C-403.0 DD104F0000S RD9F1F000-50-403.0 RD9F1F00C-50-403.0 RD9F1F00S-50 RD15F1F000-50-403.0 RD15F1F00C-50-403.0 RD15F1F00S-50 RD25F1F000-50-403.0 RD25F1F00C-50-403.0 RD25F1F00S-50 RD37F1F000-50-403.0 RD37F1F00C-50-403.0 RD37F1F00S-50 RD50F1F000-50-403.0 RD50F1F00C-50-403.0 RD50F1F00S-50 DD15F1F000-50-403.0 DD15F1F00C-50-403.0 *NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only. 64 MIL-DTL-24308/MIL-C-39029/MIL-C-85049 QUALIFIED PRODUCTS LISTING Q.P.L. CONNECTORS MILITARY PART NUMBER M24308/6-458P M24308/6-459 M24308/6-459F M24308/6-459P M24308/6-460 M24308/6-460F M24308/6-460P M24308/6-461 M24308/6-461F M24308/6-461P M24308/6-462 M24308/6-462F M24308/6-462P M24308/6-463 M24308/6-463F M24308/6-463P M24308/6-464 M24308/6-464F M24308/6-464P M24308/6-465 M24308/6-465F M24308/6-465P M24308/6-466 M24308/6-466F M24308/6-466P M24308/6-467 M24308/6-467F M24308/6-467P M24308/6-468 M24308/6-468F M24308/6-468P M24308/6-469 M24308/6-469F M24308/6-469P M24308/6-470 M24308/6-470F M24308/6-470P M24308/6-471 M24308/6-471F M24308/6-471P M24308/6-472 M24308/6-472F M24308/6-472P M24308/6-473 M24308/6-473F M24308/6-473P M24308/6-474 M24308/6-474F M24308/6-474P M24308/6-491 M24308/6-491F M24308/6-491P M24308/6-492 M24308/6-492F M24308/6-492P M24308/6-493 M24308/6-493F M24308/6-493P M24308/6-494 M24308/6-494F M24308/6-494P M24308/6-495 M24308/6-495F M24308/6-495P M24308/6-496 M24308/6-496F M24308/6-496P M24308/6-497 M24308/6-497F M24308/6-497P M24308/6-498 M24308/6-498F M24308/6-498P M24308/6-499 M24308/6-499F M24308/6-499P M24308/6-500 M24308/6-500F M24308/6-500P M24308/6-501 M24308/6-501F Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85. Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84. Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308117-89. Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85. Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79. POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC * PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER DD15F1F00S-50 DD26F1F000-50-403.0 DD26F1F00C-50-403.0 DD26F1F00S-50 DD44F1F000-50-403.0 DD44F1F00C-50-403.0 DD44F1F00S-50 DD62F1F000-50-403.0 DD62F1F00C-50-403.0 DD62F1F00S-50 DD78F1F000-50-403.0 DD78F1F00C-50-403.0 DD78F1F00S-50 DD104F1F000-50-403.0 DD104F1F00C-50-403.0 DD104F1F00S-50 RD9F1F000-50-403.1 RD9F1F00C-50-403.1 RD9F1F00S-50-400.0 RD15F1F000-50-403.1 RD15F1F00C-50-403.1 RD15F1F00S-50-400.0 RD25F1F000-50-403.1 RD25F1F00C-50-403.1 RD25F1F00S-50-400.0 RD37F1F000-50-403.1 RD37F1F00C-50-403.1 RD37F1F00S-50-400.0 RD50F1F000-50-403.1 RD50F1F00C-50-403.1 RD50F1F00S-50-400.0 DD15F1F000-50-403.2 DD15F1F00C-50-403.2 DD15F1F00S-50-400.1 DD26F1F000-50-403.2 DD26F1F00C-50-403.2 DD26F1F00S-50-400.1 DD44F1F000-50-403.2 DD44F1F00C-50-403.2 DD44F1F00S-50-400.1 DD62F1F000-50-403.2 DD62F1F00C-50-403.2 DD62F1F00S-50-400.1 DD78F1F000-50-403.2 DD78F1F00C-50-403.2 DD78F1F00S-50-400.1 DD104F1F000-50-403.2 DD104F1F00C-50-403.2 DD104F1F00S-50-400.1 RD9F0F000-403.0 RD9F0F00C-403.0 RD9F0F00S RD15F0F000-403.0 RD15F0F00C-403.0 RD15F0F00S RD25F0F000-403.0 RD25F0F00C-403.0 RD25F0F00S RD37F0F000-403.0 RD37F0F00C-403.0 RD37F0F00S RD50F0F000-403.0 RD50F0F00C-403.0 RD50F0F00S DD15F0F000-403.0 DD15F0F00C-403.0 DD15F0F00S DD26F0F000-403.0 DD26F0F00C-403.0 DD26F0F00S DD44F0F000-403.0 DD44F0F00C-403.0 DD44F0F00S DD62F0F000-403.0 DD62F0F00C-403.0 DD62F0F00S DD78F0F000-403.0 DD78F0F00C-403.0 DD78F0F00S DD104F0F000-403.0 DD104F0F00C-403.0 M24308/6-501P M24308/6-502 M24308/6-503 M24308/6-504 M24308/6-505 M24308/6-506 M24308/6-507 M24308/6-508 M24308/6-509 M24308/6-510 M24308/6-511 M24308/6-512 M24308/6-513 M24308/6-514 M24308/6-515 M24308/6-516 M24308/6-517 M24308/6-518 M24308/6-519 M24308/6-520 M24308/6-521 M24308/6-522 M24308/6-523 M24308/6-540 M24308/6-541 M24308/6-542 M24308/6-543 M24308/6-544 M24308/6-545 M24308/6-546 M24308/6-547 M24308/6-548 M24308/6-549 M24308/6-550 M24308/6-551 M24308/6-552 M24308/6-553 M24308/6-554 M24308/6-555 M24308/6-556 M24308/6-557 M24308/6-558 M24308/6-559 M24308/6-560 M24308/6-561 M24308/6-562 M24308/6-563 M24308/6-564 M24308/6-565 M24308/6-566 M24308/6-567 M24308/6-568 M24308/6-569 M24308/6-570 M24308/6-571 M24308/6-572 M24308/6-573 M24308/6-574 M24308/6-575 M24308/6-576 M24308/6-577 M24308/6-578 M24308/6-579 M24308/6-580 M24308/6-581 M24308/6-582 M24308/6-583 M24308/7-1 M24308/7-1F M24308/7-1P M24308/7-2 M24308/7-2F M24308/7-2P M24308/7-3 M24308/7-3F M24308/7-3P M24308/7-4 M24308/7-4F M24308/7-4P M24308/7-5 M24308/7-5F DD104F0F00S RD9F10000-50-403.3 RD15F10000-50-403.3 RD25F10000-50-403.3 RD37F10000-50-403.3 RD50F10000-50-403.3 RD9F10000-50-403.5 RD15F10000-50-403.5 RD25F10000-50-403.5 RD37F10000-50-403.5 RD50F10000-50-403.5 DD15F10000-50-403.3 DD26F10000-50-403.3 DD44F10000-50-403.3 DD62F10000-50-403.3 DD78F10000-50-403.3 DD104F10000-50-403.3 DD15F10000-50-403.5 DD26F10000-50-403.5 DD44F10000-50-403.5 DD62F10000-50-403.5 DD78F10000-50-403.5 DD104F10000-50-403.5 RD9F00000-403.3 RD15F00000-403.3 RD25F00000-403.3 RD37F00000-403.3 RD50F00000-403.3 DD15F00000-403.3 DD26F00000-403.3 DD44F00000-403.3 DD62F00000-403.3 DD78F00000-403.3 DD104F00000-403.3 RD9F1F000-50-403.4 RD15F1F000-50-403.4 RD25F1F000-50-403.4 RD37F1F000-50-403.4 RD50F1F000-50-403.4 DD15F1F000-50-403.4 DD26F1F000-50-403.4 DD44F1F000-50-403.4 DD62F1F000-50-403.4 DD78F1F000-50-403.4 DD104F1F000-50-403.4 RD9F1F000-50-403.6 RD15F1F000-50-403.6 RD25F1F000-50-403.6 RD37F1F000-50-403.6 RD50F1F000-50-403.6 DD15F1F000-50-403.6 DD26F1F000-50-403.6 DD44F1F000-50-403.6 DD62F1F000-50-403.6 DD78F1F000-50-403.6 DD104F1F000-50-403.6 RD9F0F000-403.4 RD15F0F000-403.4 RD25F0F000-403.4 RD37F0F000-403.4 RD50F0F000-403.4 DD15F0F000-403.4 DD26F0F000-403.4 DD44F0F000-403.4 DD62F0F000-403.4 DD78F0F000-403.4 DD104F0F000-403.4 HDC9M20000-50-403.0 HDC9M2000C-50-403.0 HDC9M2000S-50 HDC15M20000-50-403.0 HDC15M2000C-50-403.0 HDC15M2000S-50 HDC25M20000-50-403.0 HDC25M2000C-50-403.0 HDC25M2000S-50 HDC37M20000-50-403.0 HDC37M2000C-50-403.0 HDC37M2000S-50 HDC50M20000-50-403.0 HDC50M2000C-50-403.0 M24308/7-5P M24308/7-12 M24308/7-12F M24308/7-12P M24308/7-13 M24308/7-13F M24308/7-13P M24308/7-14 M24308/7-14F M24308/7-14P M24308/7-15 M24308/7-15F M24308/7-15P M24308/7-16 M24308/7-16F M24308/7-16P M24308/7-17 M24308/7-17F M24308/7-17P M24308/7-18 M24308/7-18F M24308/7-18P M24308/7-19 M24308/7-19F M24308/7-19P M24308/7-20 M24308/7-20F M24308/7-20P M24308/7-21 M24308/7-21F M24308/7-21P M24308/7-23 M24308/7-24 M24308/7-25 M24308/7-26 M24308/7-27 M24308/7-34 M24308/7-35 M24308/7-36 M24308/7-37 M24308/7-38 M24308/8-1 M24308/8-1F M24308/8-1P M24308/8-2 M24308/8-2F M24308/8-2P M24308/8-3 M24308/8-3F M24308/8-3P M24308/8-4 M24308/8-4F M24308/8-4P M24308/8-5 M24308/8-5F M24308/8-5P M24308/8-6 M24308/8-6F M24308/8-6P M24308/8-7 M24308/8-7F M24308/8-7P M24308/8-8 M24308/8-8F M24308/8-8P M24308/8-9 M24308/8-9F M24308/8-9P M24308/8-10 M24308/8-10F M24308/8-10P M24308/8-11 M24308/8-11F M24308/8-11P M24308/8-12 M24308/8-12F M24308/8-12P M24308/8-13 M24308/8-13F M24308/8-13P M24308/8-14 HDC50M2000S-50 HDC9M2F000-50-403.0 HDC9M2F00C-50-403.0 HDC9M2F00S-50 HDC15M2F000-50-403.0 HDC15M2F00C-50-403.0 HDC15M2F00S-50 HDC25M2F000-50-403.0 HDC25M2F00C-50-403.0 HDC25M2F00S-50 HDC37M2F000-50-403.0 HDC37M2F00C-50-403.0 HDC37M2F00S-50 HDC50M2F000-50-403.0 HDC50M2F00C-50-403.0 HDC50M2F00S-50 HDC9M2F000-50-403.0 HDC9M2F00C-50-403.0 HDC9M2F00S-50 HDC15M2F000-50-403.0 HDC15M2F00C-50-403.0 HDC15M2F00S-50 HDC25M2F000-50-403.0 HDC25M2F00C-50-403.0 HDC25M2F00S-50 HDC37M2F000-50-403.0 HDC37M2F00C-50-403.0 HDC37M2F00S-50 HDC50M2F000-50-403.0 HDC50M2F00C-50-403.0 HDC50M2F00S-50 HDC9M20000-50-403.3 HDC15M20000-50-403.3 HDC25M20000-50-403.3 HDC37M20000-50-403.3 HDC50M20000-50-403.3 HDC9M2F000-50-403.4 HDC15M2F000-50-403.4 HDC25M2F000-50-403.4 HDC37M2F000-50-403.4 HDC50M2F000-50-403.4 RD9M10000-50-403.0 RD9M1000C-50-403.0 RD9M1000S-50 RD15M10000-50-403.0 RD15M1000C-50-403.0 RD15M1000S-50 RD25M10000-50-403.0 RD25M1000C-50-403.0 RD25M1000S-50 RD37M10000-50-403.0 RD37M1000C-50-403.0 RD37M1000S-50 RD50M10000-50-403.0 RD50M1000C-50-403.0 RD50M1000S-50 RD9M10000-50-403.1 RD9M1000C-50-403.1 RD9M1000S-50-400.0 RD15M10000-50-403.1 RD15M1000C-50-403.1 RD15M1000S-50-400.0 RD25M10000-50-403.1 RD25M1000C-50-403.1 RD25M1000S-50-400.0 RD37M10000-50-403.1 RD37M1000C-50-403.1 RD37M1000S-50-400.0 RD50M10000-50-403.1 RD50M1000C-50-403.1 RD50M1000S-50-400.0 DD15M10000-50-403.0 DD15M1000C-50-403.0 DD15M1000S-50 DD26M10000-50-403.0 DD26M1000C-50-403.0 DD26M1000S-50 DD44M10000-50-403.0 DD44M1000C-50-403.0 DD44M1000S-50 DD62M10000-50-403.0 M24308/8-14F M24308/8-14P M24308/8-15 M24308/8-15F M24308/8-15P M24308/8-16 M24308/8-16F M24308/8-16P M24308/8-17 M24308/8-17F M24308/8-17P M24308/8-18 M24308/8-18F M24308/8-18P M24308/8-19 M24308/8-19F M24308/8-19P M24308/8-20 M24308/8-20F M24308/8-20P M24308/8-21 M24308/8-21F M24308/8-21P M24308/8-22 M24308/8-22F M24308/8-22P M24308/8-259 M24308/8-259F M24308/8-259P M24308/8-260 M24308/8-260F M24308/8-260P M24308/8-261 M24308/8-261F M24308/8-261P M24308/8-262 M24308/8-262F M24308/8-262P M24308/8-263 M24308/8-263F M24308/8-263P M24308/8-264 M24308/8-264F M24308/8-264P M24308/8-265 M24308/8-265F M24308/8-265P M24308/8-266 M24308/8-266F M24308/8-266P M24308/8-267 M24308/8-267F M24308/8-267P M24308/8-268 M24308/8-268F M24308/8-268P M24308/8-269 M24308/8-269F M24308/8-269P M24308/8-335 M24308/8-336 M24308/8-337 M24308/8-338 M24308/8-339 M24308/8-340 M24308/8-341 M24308/8-342 M24308/8-343 M24308/8-344 M24308/8-345 M24308/8-346 M24308/8-347 M24308/8-348 M24308/8-349 M24308/8-350 M24308/8-351 M24308/8-352 M24308/8-353 M24308/8-354 M24308/8-355 M24308/8-356 *NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only. 65 DD62M1000C-50-403.0 DD62M1000S-50 DD78M10000-50-403.0 DD78M1000C-50-403.0 DD78M1000S-50 DD104M10000-50-403.0 DD104M1000C-50-403.0 DD104M1000S-50 DD15M10000-50-403.2 DD15M1000C-50-403.2 DD15M1000S-50-400.1 DD26M10000-50-403.2 DD26M1000C-50-403.2 DD26M1000S-50-400.1 DD44M10000-50-403.2 DD44M1000C-50-403.2 DD44M1000S-50-400.1 DD62M10000-50-403.2 DD62M1000C-50-403.2 DD62M1000S-50-400.1 DD78M10000-50-403.2 DD78M1000C-50-403.2 DD78M1000S-50-400.1 DD104M10000-50-403.2 DD104M1000C-50-403.2 DD104M1000S-50-400.1 RD9M00000-403.0 RD9M0000C-403.0 RD9M0000S RD15M00000-403.0 RD15M0000C-403.0 RD15M0000S RD25M00000-403.0 RD25M0000C-403.0 RD25M0000S RD37M00000-403.0 RD37M0000C-403.0 RD37M0000S RD50M00000-403.0 RD50M0000C-403.0 RD50M0000S DD15M00000-403.0 DD15M0000C-403.0 DD15M0000S DD26M00000-403.0 DD26M0000C-403.0 DD26M0000S DD44M00000-403.0 DD44M0000C-403.0 DD44M0000S DD62M00000-403.0 DD62M0000C-403.0 DD62M0000S DD78M00000-403.0 DD78M0000C-403.0 DD78M0000S DD104M00000-403.0 DD104M0000C-403.0 DD104M0000S RD9M10000-50-403.3 RD15M10000-50-403.3 RD25M10000-50-403.3 RD37M10000-50-403.3 RD50M10000-50-403.3 RD9M10000-50-403.5 RD15M10000-50-403.5 RD25M10000-50-403.5 RD37M10000-50-403.5 RD50M10000-50-403.5 DD15M10000-50-403.3 DD26M10000-50-403.3 DD44M10000-50-403.3 DD62M10000-50-403.3 DD78M10000-50-403.3 DD104M10000-50-403.3 DD15M10000-50-403.5 DD26M10000-50-403.5 DD44M10000-50-403.5 DD62M10000-50-403.5 DD78M10000-50-403.5 DD104M10000-50-403.5 MIL-DTL-24308/MIL-C-39029/MIL-C-85049 QUALIFIED PRODUCTS LISTING Q.P.L. CONNECTORS MILITARY PART NUMBER M24308/8-357 M24308/8-358 M24308/8-359 M24308/8-360 M24308/8-361 M24308/8-362 M24308/8-363 M24308/8-364 M24308/8-365 M24308/8-366 M24308/8-367 M24308/8-401 M24308/8-402 M24308/8-403 M24308/8-404 M24308/8-405 M24308/8-406 M24308/8-407 M24308/8-408 M24308/8-409 M24308/8-410 M24308/8-411 M24308/8-412 M24308/8-413 M24308/8-414 M24308/8-415 M24308/8-416 M24308/8-417 M24308/8-418 M24308/8-419 M24308/8-420 M24308/8-421 M24308/8-422 M24308/8-423 M24308/8-424 M24308/8-425 M24308/8-426 M24308/8-427 M24308/8-428 M24308/8-429 M24308/8-430 M24308/8-431 M24308/8-432 M24308/8-433 M24308/8-435 M24308/8-435F M24308/8-435P M24308/8-436 M24308/8-436F M24308/8-436P M24308/8-437 M24308/8-437F M24308/8-437P M24308/8-438 M24308/8-438F M24308/8-438P M24308/8-439 M24308/8-439F M24308/8-439P M24308/8-440 M24308/8-440F M24308/8-440P M24308/8-441 M24308/8-441F M24308/8-441P M24308/8-442 M24308/8-442F M24308/8-442P M24308/8-443 M24308/8-443F M24308/8-443P M24308/8-444 M24308/8-444F M24308/8-444P M24308/8-445 M24308/8-445F M24308/8-445P M24308/8-446 M24308/8-446F M24308/8-446P Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85. Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84. Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308117-89. Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85. Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79. POSITRONIC * PART NUMBER RD9M00000-403.3 RD15M00000-403.3 RD25M00000-403.3 RD37M00000-403.3 RD50M00000-403.3 DD15M00000-403.3 DD26M00000-403.3 DD44M00000-403.3 DD62M00000-403.3 DD78M00000-403.3 DD104M00000-403.3 RD9M1F000-50-403.4 RD15M1F000-50-403.4 RD25M1F000-50-403.4 RD37M1F000-50-403.4 RD50M1F000-50-403.4 DD15M1F000-50-403.4 DD26M1F000-50-403.4 DD44M1F000-50-403.4 DD62M1F000-50-403.4 DD78M1F000-50-403.4 DD104M1F000-50-403.4 RD9M1F000-50-403.6 RD15M1F000-50-403.6 RD25M1F000-50-403.6 RD37M1F000-50-403.6 RD50M1F000-50-403.6 DD15M1F000-50-403.6 DD26M1F000-50-403.6 DD44M1F000-50-403.6 DD62M1F000-50-403.6 DD78M1F000-50-403.6 DD104M1F000-50-403.6 RD9M0F000-403.4 RD15M0F000-403.4 RD25M0F000-403.4 RD37M0F000-403.4 RD50M0F000-403.4 DD15M0F000-403.4 DD26M0F000-403.4 DD44M0F000-403.4 DD62M0F000-403.4 DD78M0F000-403.4 DD104M0F000-403.4 RD9M1F000-50-403.0 RD9M1F00C-50-403.0 RD9M1F00S-50 RD15M1F000-50-403.0 RD15M1F00C-50-403.0 RD15M1F00S-50 RD25M1F000-50-403.0 RD25M1F00C-50-403.0 RD25M1F00S-50 RD37M1F000-50-403.0 RD37M1F00C-50-403.0 RD37M1F00S-50 RD50M1F000-50-403.0 RD50M1F00C-50-403.0 RD50M1F00S-50 DD15M1F000-50-403.0 DD15M1F00C-50-403.0 DD15M1F00S-50 DD26M1F000-50-403.0 DD26M1F00C-50-403.0 DD26M1F00S-50 DD44M1F000-50-403.0 DD44M1F00C-50-403.0 DD44M1F00S-50 DD62M1F000-50-403.0 DD62M1F00C-50-403.0 DD62M1F00S-50 DD78M1F000-50-403.0 DD78M1F00C-50-403.0 DD78M1F00S-50 DD104M1F000-50-403.0 DD104M1F00C-50-403.0 DD104M1F00S-50 RD9M1F000-50-403.1 RD9M1F00C-50-403.1 RD9M1F00S-50-400.0 MILITARY PART NUMBER M24308/8-447 M24308/8-447F M24308/8-447P M24308/8-448 M24308/8-448F M24308/8-448P M24308/8-449 M24308/8-449F M24308/8-449P M24308/8-450 M24308/8-450F M24308/8-450P M24308/8-451 M24308/8-451F M24308/8-451P M24308/8-452 M24308/8-452F M24308/8-452P M24308/8-453 M24308/8-453F M24308/8-453P M24308/8-454 M24308/8-454F M24308/8-454P M24308/8-455 M24308/8-455F M24308/8-455P M24308/8-456 M24308/8-456F M24308/8-456P M24308/8-457 M24308/8-457F M24308/8-457P M24308/8-458 M24308/8-458F M24308/8-458P M24308/8-459 M24308/8-459F M24308/8-459P M24308/8-460 M24308/8-460F M24308/8-460P M24308/8-461 M24308/8-461F M24308/8-461P M24308/8-462 M24308/8-462F M24308/8-462P M24608/8-463 M24308/8-463F M24308/8-463P M24308/8-464 M24308/8-464F M24308/8-464P M24308/8-465 M24308/8-465F M24308/8-465P M24308/8-466 M24308/8-466F M24308/8-466P M24308/8-467 M24308/8-467F M24308/8-467P M24308/23-1 M24308/23-1F M24308/23-1P M24308/23-2 M24308/23-2F M24308/23-2P M24308/23-3 M24308/23-3F M24308/23-3P M24308/23-4 M24308/23-4F M24308/23-4P M24308/23-5 M24308/23-5F M24308/23-5P M24308/23-7 M24308/23-7F POSITRONIC * PART NUMBER RD15M1F000-50-403.1 RD15M1F00C-50-403.1 RD15M1F00S-50-400.0 RD25M1F000-50-403.1 RD25M1F00C-50-403.1 RD25M1F00S-50-400.0 RD37M1F000-50-403.1 RD37M1F00C-50-403.1 RD37M1F00S-50-400.0 RD50M1F000-50-403.1 RD50M1F00C-50-403.1 RD50M1F00S-50-400.0 DD15M1F000-50-403.2 DD15M1F00C-50-403.2 DD15M1F00S-50-400.1 DD26M1F000-50-403.2 DD26M1F00C-50-403.2 DD26M1F00S-50-400.1 DD44M1F000-50-403.2 DD44M1F00C-50-403.2 DD44M1F00S-50-400.1 DD62M1F000-50-403.2 DD62M1F00C-50-403.2 DD62M1F00S-50-400.1 DD78M1F000-50-403.2 DD78M1F00C-50-403.2 DD78M1F00S-50-400.1 DD104M1F000-50-403.2 DD104M1F00C-50-403.2 DD104M1F00S-50-400.1 RD9M0F000-403.0 RD9M0F00C-403.0 RD9M0F00S RD15M0F000-403.0 RD15M0F00C-403.0 RD15M0F00S RD25M0F000-403.0 RD25M0F00C-403.0 RD25M0F00S RD37M0F000-403.0 RD37M0F00C-403.0 RD37M0F00S RD50M0F000-403.0 RD50M0F00C-403.0 RD50M0F00S DD15M0F000-403.0 DD15M0F00C-403.0 DD15M0F00S DD26M0F000-403.0 DD26M0F00C-403.0 DD26M0F00S DD44M0F000-403.0 DD44M0F00C-403.0 DD44M0F00S DD62M0F000-403.0 DD62M0F00C-403.0 DD62M0F00S DD78M0F000-403.0 DD78M0F00C-403.0 DD78M0F00S DD104M0F000-403.0 DD104M0F00C-403.0 DD104M0F00S HDC9F3P000-50 HDC9F3P00C-50 HDC9F3P00S-50 HDC15F3P000-50 HDC15F3P00C-50 HDC15F3P00S-50 HDC25F3P000-50 HDC25F3P00C-50 HDC25F3P00S-50 HDC37F3P000-50 HDC37F3P00C-50 HDC37F3P00S-50 HDC50F3P000-50 HDC50F3P00C-50 HDC50F3P00S-50 HDC9F3P000-50-375.10 HDC9F3P00C-50-375.10 MILITARY PART NUMBER M24308/23-7P M24308/23-8 M24308/23-8F M24308/23-8P M24308/23-9 M24308/23-9F M24308/23-9P M24308/23-10 M24308/23-10F M24308/23-10P M24308/23-11 M24308/23-11F M24308/23-11P M24308/23-13 M24308/23-13F M24308/23-13P M24308/23-14 M24308/23-14F M24308/23-14P M24308/23-15 M24308/23-15F M24308/23-15P M24308/23-16 M24308/23-16F M24308/23-16P M24308/23-17 M24308/23-17F M24308/23-17P M24308/23-19 M24308/23-19F M24308/23-19P M24308/23-20 M24308/23-20F M24308/23-20P M24308/23-21 M24308/23-21F M24308/23-21P M24308/23-22 M24308/23-22F M24308/23-22P M24308/23-23 M24308/23-23F M24308/23-23P M24308/23-25 M24308/23-25F M24308/23-25P M24308/23-26 M24308/23-26F M24308/23-26P M24308/23-27 M24308/23-27F M24308/23-27P M24308/23-28 M24308/23-28F M24308/23-28P M24308/23-29 M24308/23-29F M24308/23-29P M24308/23-31 M24308/23-31F M24308/23-31P M24308/23-32 M24308/23-32F M24308/23-32P M24308/23-33 M24308/23-33F M24308/23-33P M24308/23-34 M24308/23-34F M24308/23-34P M24308/23-35 M24308/23-35F M24308/23-35P M24308/23-37 M24308/23-37F M24308/23-37P M24308/23-38 M24308/23-38F M24308/23-38P M24308/23-39 POSITRONIC * PART NUMBER HDC9F3P00S-50-375.10 HDC15F3P000-50-375.10 HDC15F3P00C-50-375.10 HDC15F3P00S-50-375.10 HDC25F3P000-50-375.10 HDC25F3P00C-50-375.10 HDC25F3P00S-50-375.10 HDC37F3P000-50-375.10 HDC37F3P00C-50-375.10 HDC37F3P00S-50-375.10 HDC50F3P000-50-375.10 HDC50F3P00C-50-375.10 HDC50F3P00S-50-375.10 HDC9F3P000-50-375.2 HDC9F3P00C-50-375.2 HDC9F3P00S-50-375.2 HDC15F3P000-50-375.2 HDC15F3P00C-50-375.2 HDC15F3P00S-50-375.2 HDC25F3P000-50-375.2 HDC25F3P00C-50-375.2 HDC25F3P00S-50-375.2 HDC37F3P000-50-375.2 HDC37F3P00C-50-375.2 HDC37F3P00S-50-375.2 HDC50F3P000-50-375.2 HDC50F3P00C-50-375.2 HDC50F3P00S-50-375.2 HDC9F3P000-50-375.9 HDC9F3P00C-50-375.9 HDC9F3P00S-50-375.9 HDC15F3P000-50-375.9 HDC15F3P00C-50-375.9 HDC15F3P00S-50-375.9 HDC25F3P000-50-375.9 HDC25F3P00C-50-375.9 HDC25F3P00S-50-375.9 HDC37F3P000-50-375.9 HDC37F3P00C-50-375.9 HDC37F3P00S-50-375.9 HDC50F3P000-50-375.9 HDC50F3P00C-50-375.9 HDC50F3P00S-50-375.9 HDC9F5B8000-50-376.6 HDC9F5B800C-50-376.6 HDC9F5B800S-50-376.6 HDC15F5B8000-50-376.6 HDC15F5B800C-50-376.6 HDC15F5B800S-50-376.6 HDC25F5B8000-50-376.6 HDC25F5B800C-50-376.6 HDC25F5B800S-50-376.6 HDC37F5B8000-50-376.6 HDC37F5B800C-50-376.6 HDC37F5B800S-50-376.6 HDC50F5B8000-50-376.6 HDC50F5B800C-50-376.6 HDC50F5B800S-50-376.6 HDC9F5B8000-50 HDC9F5B800C-50 HDC9F5B800S-50 HDC15F5B8000-50 HDC15F5B800C-50 HDC15F5B800S-50 HDC25F5B8000-50 HDC25F5B800C-50 HDC25F5B800S-50 HDC37F5B8000-50 HDC37F5B800C-50 HDC37F5B800S-50 HDC50F5B8000-50 HDC50F5B800C-50 HDC50F5B800S-50 HDC9F5B8000-50-376.5 HDC9F5B800C-50-376.5 HDC9F5B800S-50-376.5 HDC15F5B8000-50-376.5 HDC15F5B800C-50-376.5 HDC15F5B800S-50-376.5 HDC25F5B8000-50-376.5 MILITARY PART NUMBER M24308/23-39F M24308/23-39P M24308/23-40 M24308/23-40F M24308/23-40P M24308/23-41 M24308/23-41F M24308/23-41P M24308/23-43 M24308/23-43F M24308/23-43P M24308/23-44 M24308/23-44F M24308/23-44P M24308/23-45 M24308/23-45F M24308/23-45P M24308/23-46 M24308/23-46F M24308/23-46P M24308/23-47 M24308/23-47F M24308/23-47P M24308/23-49 M24308/23-49F M24308/23-49P M24308/23-50 M24308/23-50F M24308/23-50P M24308/23-51 M24308/23-51F M24308/23-51P M24308/23-52 M24308/23-52F M24308/23-52P M24308/23-53 M24308/23-53F M24308/23-53P M24308/23-55 M24308/23-55F M24308/23-55P M24308/23-56 M24308/23-56F M24308/23-56P M24308/23-57 M24308/23-57F M24308/23-57P M24308/23-58 M24308/23-58F M24308/23-58P M24308/23-59 M24308/23-59F M24308/23-59P M24308/23-61 M24308/23-61F M24308/23-61P M24308/23-62 M24308/23-62F M24308/23-62P M24308/23-63 M24308/23-63F M24308/23-63P M24308/23-64 M24308/23-64F M24308/23-64P M24308/23-65 M24308/23-65F M24308/23-65P M24308/23-67 M24308/23-67F M24308/23-67P M24308/23-68 M24308/23-68F M24308/23-68P M24308/23-69 M24308/23-69F M24308/23-69P M24308/23-70 M24308/23-70F M24308/23-70P POSITRONIC * PART NUMBER HDC25F5B800C-50-376.5 HDC25F5B800S-50-376.5 HDC37F5B8000-50-376.5 HDC37F5B800C-50-376.5 HDC37F5B800S-50-376.5 HDC50F5B8000-50-376.5 HDC50F5B800C-50-376.5 HDC50F5B800S-50-376.5 HDC9F5B8000-50-376.2 HDC9F5B800C-50-376.2 HDC9F5B800S-50-376.2 HDC15F5B8000-50-376.2 HDC15F5B800C-50-376.2 HDC15F5B800S-50-376.2 HDC25F5B8000-50-376.2 HDC25F5B800C-50-376.2 HDC25F5B800S-50-376.2 HDC37F5B8000-50-376.2 HDC37F5B800C-50-376.2 HDC37F5B800S-50-376.2 HDC50F5B8000-50-376.2 HDC50F5B800C-50-376.2 HDC50F5B800S-50-376.2 HDC9F5B8000-50-376.8 HDC9F5B800C-50-376.8 HDC9F5B800S-50-376.8 HDC15F5B8000-50-376.8 HDC15F5B800C-50-376.8 HDC15F5B800S-50-376.8 HDC25F5B8000-50-376.8 HDC25F5B800C-50-376.8 HDC25F5B800S-50-376.8 HDC37F5B8000-50-376.8 HDC37F5B800C-50-376.8 HDC37F5B800S-50-376.8 HDC50F5B8000-50-376.8 HDC50F5B800C-50-376.8 HDC50F5B800S-50-376.8 HDC9F5B8000-50-376.7 HDC9F5B800C-50-376.7 HDC9F5B800S-50-376.7 HDC15F5B8000-50-376.7 HDC15F5B800C-50-376.7 HDC15F5B800S-50-376.7 HDC25F5B8000-50-376.7 HDC25F5B800C-50-376.7 HDC25F5B800S-50-376.7 HDC37F5B8000-50-376.7 HDC37F5B800C-50-376.7 HDC37F5B800S-50-376.7 HDC50F5B8000-50-376.7 HDC50F5B800C-50-376.7 HDC50F5B800S-50-376.7 DD15F3P000-50 DD15F3P00C-50 DD15F3P00S-50 DD26F3P000-50 DD26F3P00C-50 DD26F3P00S-50 DD44F3P000-50 DD44F3P00C-50 DD44F3P00S-50 DD62F3P000-50 DD62F3P00C-50 DD62F3P00S-50 DD78F3P000-50 DD78F3P00C-50 DD78F3P00S-50 DD15F32P000-50 DD15F32P00C-50 DD15F32P00S-50 DD26F32P000-50 DD26F32P00C-50 DD26F32P00S-50 DD44F32P000-50 DD44F32P00C-50 DD44F32P00S-50 DD62F32P000-50 DD62F32P00C-50 DD62F32P00S-50 *NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only. 66 MIL-DTL-24308/MIL-C-39029/MIL-C-85049 QUALIFIED PRODUCTS LISTING Q.P.L. CONNECTORS MILITARY PART NUMBER M24308/23-71 M24308/23-71F M24308/23-71P M24308/23-73 M24308/23-73F M24308/23-73P M24308/23-74 M24308/23-74F M24308/23-74P M24308/23-75 M24308/23-75F M24308/23-75P M24308/23-76 M24308/23-76F M24308/23-76P M24308/23-77 M24308/23-77F M24308/23-77P M24308/24-1 M24308/24-1F M24308/24-1P M24308/24-2 M24308/24-2F M24308/24-2P M24308/24-3 M24308/24-3F M24308/24-3P M24308/24-4 M24308/24-4F M24308/24-4P M24308/24-5 M24308/24-5F M24308/24-5P M24308/24-7 M24308/24-7F M24308/24-7P M24308/24-8 M24308/24-8F M24308/24-8P M24308/24-9 M24308/24-9F M24308/24-9P M24308/24-10 M24308/24-10F M24308/24-10P M24308/24-11 M24308/24-11F M24308/24-11P M24308/24-13 M24308/24-13F M24308/24-13P M24308/24-14 M24308/24-14F M24308/24-14P M24308/24-15 M24308/24-15F M24308/24-15P M24308/24-16 M24308/24-16F M24308/24-16P M24308/24-17 M24308/24-17F M24308/24-17P M24308/24-19 M24308/24-19F M24308/24-19P M24308/24-20 M24308/24-20F M24308/24-20P M24308/24-21 M24308/24-21F M24308/24-21P M24308/24-22 M24308/24-22F M24308/24-22P M24308/24-23 M24308/24-23F M24308/24-23P M24308/24-25 M24308/24-25F M24308/24-25P Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85. Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84. Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308117-89. Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85. Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79. POSITRONIC * PART NUMBER DD78F32P000-50 DD78F32P00C-50 DD78F32P00S-50 DD15F4B8000-50 DD15F4B800C-50 DD15F4B800S-50 DD26F4B8000-50 DD26F4B800C-50 DD26F4B800S-50 DD44F4B8000-50 DD44F4B800C-50 DD44F4B800S-50 DD62F4B8000-50 DD62F4B800C-50 DD62F4B800S-50 DD78F4B8000-50 DD78F4B800C-50 DD78F4B800S-50 HDC9M3P000-50 HDC9M3P00C-50 HDC9M3P00S-50 HDC15M3P000-50 HDC15M3P00C-50 HDC15M3P00S-50 HDC25M3P000-50 HDC25M3P00C-50 HDC25M3P00S-50 HDC37M3P000-50 HDC37M3P00C-50 HDC37M3P00S-50 HDC50M3P000-50 HDC50M3P00C-50 HDC50M3P00S-50 HDC9M3P000-50-375.10 HDC9M3P00C-50-375.10 HDC9M3P00S-50-375.10 HDC15M3P000-50-375.10 HDC15M3P00C-50-375.10 HDC15M3P00S-50-375.10 HDC25M3P000-50-375.10 HDC25M3P00C-50-375.10 HDC25M3P00S-50-375.10 HDC37M3P000-50-375.10 HDC37M3P00C-50-375.10 HDC37M3P00S-50-375.10 HDC50M3P000-50-375.10 HDC50M3P00C-50-375.10 HDC50M3P00S-50-375.10 HDC9M3P000-50-375.3 HDC9M3P00C-50-375.3 HDC9M3P00S-50-375.3 HDC15M3P000-50-375.3 HDC15M3P00C-50-375.3 HDC15M3P00S-50-375.3 HDC25M3P000-50-375.3 HDC25M3P00C-50-375.3 HDC25M3P00S-50-375.3 HDC37M3P000-50-375.3 HDC37M3P00C-50-375.3 HDC37M3P00S-50-375.3 HDC50M3P000-50-375.3 HDC50M3P00C-50-375.3 HDC50M3P00S-50-375.3 HDC9M3P000-50-375.9 HDC9M3P00C-50-375.9 HDC9M3P00S-50-375.9 HDC15M3P000-50-375.9 HDC15M3P00C-50-375.9 HDC15M3P00S-50-375.9 HDC25M3P000-50-375.9 HDC25M3P00C-50-375.9 HDC25M3P00S-50-375.9 HDC37M3P000-50-375.9 HDC37M3P00C-50-375.9 HDC37M3P00S-50-375.9 HDC50M3P000-50-375.9 HDC50M3P00C-50-375.9 HDC50M3P00S-50-375.9 HDC9M5B8000-50-376.6 HDC9M5B800C-50-376.6 HDC9M5B800S-50-376.6 MILITARY PART NUMBER M24308/24-26 M24308/24-26F M24308/24-26P M24308/24-27 M24308/24-27F M24308/24-27P M24308/24-28 M24308/24-28F M24308/24-28P M24308/24-29 M24308/24-29F M24308/24-29P M24308/24-31 M24308/24-31F M24308/24-31P M24308/24-32 M24308/24-32F M24308/24-32P M24308/24-33 M24308/24-33F M24308/24-33P M24308/24-34 M24308/24-34F M24308/24-34P M24308/24-35 M24308/24-35F M24308/24-35P M24308/24-37 M24308/24-37F M24308/24-37P M24308/24-38 M24308/24-38F M24308/24-38P M24308/24-39 M24308/24-39F M24308/24-39P M24308/24-40 M24308/24-40F M24308/24-40P M24308/24-41 M24308/24-41F M24308/24-41P M24308/24-43 M24308/24-43F M24308/24-43P M24308/24-44 M24308/24-44F M24308/24-44P M24308/24-45 M24308/24-45F M24308/24-45P M24308/24-46 M24308/24-46F M24308/24-46P M24308/24-47 M24308/24-47F M24308/24-47P M24308/24-49 M24308/24-49F M24308/24-49P M24308/24-50 M24308/24-50F M24308/24-50P M24308/24-51 M24308/24-51F M24308/24-51P M24308/24-52 M24308/24-52F M24308/24-52P M24308/24-53 M24308/24-53F M24308/24-53P M24308/24-55 M24308/24-55F M24308/24-55P M24308/24-56 M24308/24-56F M24308/24-56P M24308/24-57 M24308/24-57F M24308/24-57P POSITRONIC * PART NUMBER HDC15M5B8000-50-376.6 HDC15M5B800C-50-376.6 HDC15M5B800S-50-376.6 HDC25M5B8000-50-376.6 HDC25M5B800C-50-376.6 HDC25M5B800S-50-376.6 HDC37M5B8000-50-376.6 HDC37M5B800C-50-376.6 HDC37M5B800S-50-376.6 HDC50M5B8000-50-376.6 HDC50M5B800C-50-376.6 HDC50M5B800S-50-376.6 HDC9M5B8000-50 HDC9M5B800C-50 HDC9M5B800S-50 HDC15M5B8000-50 HDC15M5B800C-50 HDC15M5B800S-50 HDC25M5B8000-50 HDC25M5B800C-50 HDC25M5B800S-50 HDC37M5B8000-50 HDC37M5B800C-50 HDC37M5B800S-50 HDC50M5B8000-50 HDC50M5B800C-50 HDC50M5B800S-50 HDC9M5B8000-50-376.5 HDC9M5B800C-50-376.5 HDC9M5B800S-50-376.5 HDC15M5B8000-50-376.5 HDC15M5B800C-50-376.5 HDC15M5B800S-50-376.5 HDC25M5B8000-50-376.5 HDC25M5B800C-50-376.5 HDC25M5B800S-50-376.5 HDC37M5B8000-50-376.5 HDC37M5B800C-50-376.5 HDC37M5B800S-50-376.5 HDC50M5B8000-50-376.5 HDC50M5B800C-50-376.5 HDC50M5B800S-50-376.5 HDC9M5B8000-50-376.3 HDC9M5B800C-50-376.3 HDC9M5B800S-50-376.3 HDC15M5B8000-50-376.3 HDC15M5B800C-50-376.3 HDC15M5B800S-50-376.3 HDC25M5B8000-50-376.3 HDC25M5B800C-50-376.3 HDC25M5B800S-50-376.3 HDC37M5B8000-50-376.3 HDC37M5B800C-50-376.3 HDC37M5B800S-50-376.3 HDC50M5B8000-50-376.3 HDC50M5B800C-50-376.3 HDC50M5B800S-50-376.3 HDC9M5B8000-50-376.8 HDC9M5B800C-50-376.8 HDC9M5B800S-50-376.8 HDC15M5B8000-50-376.8 HDC15M5B800C-50-376.8 HDC15M5B800S-50-376.8 HDC25M5B8000-50-376.8 HDC25M5B800C-50-376.8 HDC25M5B800S-50-376.8 HDC37M5B8000-50-376.8 HDC37M5B800C-50-376.8 HDC37M5B800S-50-376.8 HDC50M5B8000-50-376.8 HDC50M5B800C-50-376.8 HDC50M5B800S-50-376.8 HDC9M5B8000-50-376.7 HDC9M5B800C-50-376.7 HDC9M5B800S-50-376.7 HDC15M5B8000-50-376.7 HDC15M5B800C-50-376.7 HDC15M5B800S-50-376.7 HDC25M5B8000-50-376.7 HDC25M5B800C-50-376.7 HDC25M5B800S-50-376.7 MILITARY PART NUMBER POSITRONIC * PART NUMBER M24308/24-58 HDC37M5B8000-50-376.7 M24308/24-58F HDC37M5B800C-50-376.7 M24308/24-58P HDC37M5B800S-50-376.7 M24308/24-59 HDC50M5B8000-50-376.7 M24308/24-59F HDC50M5B800C-50-376.7 M24308/24-59P HDC50M5B800S-50-376.7 M24308/24-61 DD15M3P000-50 M24308/24-61F DD15M3P00C-50 M24308/24-61P DD15M3P00S-50 M24308/24-62 DD26M3P000-50 M24308/24-62F DD26M3P00C-50 M24308/24-62P DD26M3P00S-50 M24308/24-63 DD44M3P000-50 M24308/24-63F DD44M3P00C-50 M24308/24-63P DD44M3P00S-50 M24308/24-64 DD62M3P000-50 M24308/24-64F DD62M3P00C-50 M24308/24-64P DD62M3P00S-50 M24308/24-65 DD78M3P000-50 M24308/24-65F DD78M3P00C-50 M24308/24-65P DD78M3P00S-50 M24308/24-67 DD15M32P000-50 M24308/24-67F DD15M32P00C-50 M24308/24-67P DD15M32P00S-50 M24308/24-68 DD26M32P000-50 M24308/24-68F DD26M32P00C-50 M24308/24-68P DD26M32P00S-50 M24308/24-69 DD44M32P000-50 M24308/24-69F DD44M32P00C-50 M24308/24-69P DD44M32P00S-50 M24308/24-70 DD62M32P000-50 M24308/24-70F DD62M32P00C-50 M24308/24-70P DD62M32P00S-50 M24308/24-71 DD78M32P000-50 M24308/24-71F DD78M32P00C-50 M24308/24-71P DD78M32P00S-50 M24308/24-73 DD15M4B8000-50 M24308/24-73F DD15M4B800C-50 M24308/24-73P DD15M4B800S-50 M24308/24-74 DD26M4B8000-50 M24308/24-74F DD26M4B800C-50 M24308/24-74P DD26M4B800S-50 M24308/24-75 DD44M4B8000-50 M24308/24-75F DD44M4B800C-50 M24308/24-75P DD44M4B800S-50 M24308/24-76 DD62M4B8000-50 M24308/24-76F DD62M4B800C-50 M24308/24-76P DD62M4B800S-50 M24308/24-77 DD78M4B8000-50 M24308/24-77F DD78M4B800C-50 M24308/24-77P DD78M4B800S-50 M24308/25-6 D00000E20 M24308/25-6F D00000E20-462.31 M24308/25-6P D00000E20-462.23 M24308/26-1 D00000T20-462.32 M24308/26-1F D00000T20-462.33 M24308/26-1P D00000T20-462.7 M24308/26-2 D00000T30-462.32 M24308/26-2F D00000T30-462.33 M24308/26-2P D00000T30-462.7 CRIMPCONTACTS M39029/57-354 FC8022D-50 M39029/58-360 MC8022D-50 M39029/63-368 FC6020D-50 M39029/64-369 MC6020D-50 METALHOODS M85049/48-1-3F RD25000H00 M85049/48-1-4F RD37000H00 M85049/48-1-5F RD50000H00 *NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only. 67