ODD26M1000X - Positronic - Datasheet.Live

Unless specified otherwise, dimensional tolerances are:

1) ±0.001 inches (0.03 mm) for male contact mating diameters.

2) ±0.003 inches (0.08 mm) for contact termination diameters.

3) ±0.005 inches (0.13 mm) for all other diameters.

4) ±0.015 inches (0.38 mm) for all other dimensions.

5) ±0.0015 inches (0.038 mm) for all press-fit contact terminations.

Maximum Torque Values for 4-40 UNC Threads

These torque values are applicable for threads only and do not apply to hardware assemblies. These torque

values are approximate and should not be accepted as accurate limits. Indeterminant factors in specific appli-

cations preclude the publication of accurate torque values for universal use.

MATERIAL Nm in-lb in-oz

Phos. Bronze 0.90 8.0 128

Brass 0.68 6.0 96

Aluminum 0.45 4.0 64

Nylon 0.11 1.0 16

TORQUE

Positronic Industries’ FEDERAL SUPPLY CODE FOR MANUFACTURERS is number 28198.

Positronic Industries believes the data contained herein to be reliable. Since the technical information is given free of

charge, the user employs such information at his own discretion and risk. Positronic Industries assumes no responsi-

bility for results obtained or damages incurred from use of such information in whole or in part.

CATALOG NUMBER:

C–001 REV .A

PRINTED DATE:

APRIL 2001

PUBLISHED IN THE UNITED STATES OF AMERICA

Products described within this catalog may be pro-

tected by one or more of the following U.S. patents:

5,255,580

5,329,697

Other Patents Pending

TABLE OF CONTENTS

MATED CONNECTOR ASSEMBLIES. . . . . . . . . . . . . . . . 1-2

MELO-D and EURO-D CONNECTORS. . . . . . . . . . . . . . 3-10

SOLI-D CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . 11-19

Exploded views of typical mated Subminiature-D

connector assemblies.

MD Series and ED Series. Fixed contact, 7.5 ampere

nominal rating. Solder cup, wrap post, and printed

board contact terminations for inch and metric printed

board hole patterns. Six connector variants, 9 through

50 contacts. Professional quality connectors to IEC

807-2, Performance Level Two.

SD Series. Removable contact, 7.5 ampere nominal

rating. Solder cup, crimp and straight printed board

mount contact terminations. Five connector variants,

9 through 50 contacts. Professional quality connec-

tors to IEC 807-3, Performance Level Two.

DENSI-D CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . 20-28

DD Series. Removable contact, five ampere nominal

rating. Solder cup, crimp and straight and 90° printed

board contact terminations. Six connector variants, 15

through 104 contacts. Military quality connectors qual-

ified to MIL-DTL-24308 and MIL-C-39029.

LOW COST HIGH DENSITY CONNECTORS . . . . . . . . 29-37

ODD Series. Removable contact, five ampere nominal

rating. Solder cup, crimp and straight and 90° printed

board contact terminations. Six connector variants, 15

through 104 contacts. Professional quality connectors.

LOW COST STANDARD DENSITY CONNECTORS . . . 38-41

ORD Series. Removable contact, 7.5 ampere nominal

rating. Crimp contact terminations. Six connector vari-

ants, 9 through 50 contacts. Professional quality con-

nectors.

RHAPSO-D CONNECTORS . . . . . . . . . . . . . . . . . . . . . 42-46

RD Series. Removable contact, 7.5 ampere nomi-

nal rating. Crimp contact terminations. Six connec-

tor variants, 9 through 50 contacts. Military quality

connectors qualified to MIL-DTL-24308 and MIL-C-

39029. IEC 807-3, Performance Level One.

HARMO-D CONNECTORS . . . . . . . . . . . . . . . . . . . . . . 47-52

HDC Series. Fixed contact, 7.5 ampere nominal rat-

ing. Solder cup, wrap post and straight and 90°

printed board contact terminations. Five connector

variants, 9 through 50 contacts. Military quality con-

nectors qualified to MIL-DTL-24308, IEC 807-2,

Performance Level One.

PRESS-FIT CONNECTORS . . . . . . . . . . . . . . . . . . . . . 53-57

MIL-DTL-24308, MIL-C-39029 and MIL-C-85049

QUALIFIED PRODUCTS LISTING . . . . . . . . . . . . . . . 63-67

PCD Series. Machined contact, compliant termi-

nation, repairable, 7.5 ampere nominal rating.

Five connector variants, 9 through 50 contacts.

Professional quality connectors, conform to IEC

807-2, Performance Level Two.

HIGH DENSITY PRESS-FIT CONNECTORS. . . . . . . . . 58-62

PCDD Series. Machined contact, compliant ter-

mination, repairable, 5 ampere nominal rating.

Five connector variants, 15 through 104 con-

tacts. Professional quality connectors.

EXPLODED VIEWS OF TYPICAL MATED SUBMINIATURE-D

CONNECTOR ASSEMBLIES

MATED

CONNECTOR

ASSEMBLIES

DD62M000E6X

DD62F0S50T6X

HDC25F5R7NV30

RD25M10LVL0

M24308/4-3F

M24308/23-39F

DD44F3S000-759.0

DD44M0000X-759.1

M24308/26-1

M24308/25-6

M85049/48-1-3

EXPLODED VIEWS OF TYPICAL MATED SUBMINIATURE-D

CONNECTOR ASSEMBLIES

MATED

CONNECTOR

ASSEMBLIES

CONNECTOR COMPONENT DESCRIPTION AND TERMINOLOGY

SD9M00Z0Z

MD9F5R80TX

A-1 –Male and female signal contacts, size 22. Terminations may be crimp, solder cup and

printed board mount.

A-2 –Male and female signal contacts, size 20. Terminations may be crimp, solder cup, wrap

post, press-fit and printed board mount.

B-1 –Unloaded connector insulators, male and female. Insulator retention system retains all

contact termination types. Insulator may be used as a free or fixed connector.

B-2 –Loaded connector insulators, male and female. Insulators may be preloaded per cus-

tomer requirements with contacts having terminations of 90° or straight solder printed

board mount, wrap post, solder cup and press-fit. Insulator contact positions may be

selectively loaded with contacts. Connectors are normally fixed panel or printed board

connectors.

C-1 –Fixed female jackscrews are the stationary threaded members of the non-polarized

jackscrew system.

C-2 –Fixed male and female jackscrews are the stationary threaded members of the polarized

jackscrew system.

C-3 – Rotating male jackscrews and screwlocks are the rotating threaded members of the non-

polarized jackscrew system.

C-4 –Rotating male and female jackscrews are the rotating threaded members of the polarized

jackscrew system.

C-5 – Vibration locking system consists of lock tabs on fixed connector and slide lock lever on

free cable connector.

C-6 – Blind mating connector system with pilot probes on free connector and receptacle guides

on panel mounted fixed connector.

C-7 –Cable adapters (Hoods) are used on the free cable connector to provide cable support

and contact protection.

C-8 –Knobs of the polarized rotating jackscrew system are affixed to the rotating jackscrew by

a set screw.

Size 20 Contacts, Fixed

Professional Quality

Connectors

IEC Publication 807-2

Performance Level Two

U.L. Recognized CSA Recognized

File #E49351 File #LR54219

Telecommunication

U.L. File #14098

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

M e l o - D / E u r o - D

Series

Melo-D and Euro-D Series connectors are professional qual-

ity connectors recommended for use in sheltered, non-corro-

sive indoor or outdoor environments having normal ventilation,

but without temperature or humidity controls. These fixed con-

tact connectors meet the dimensional and performance

requirements of IEC 807-2, Performance Level Two.

Melo-D and Euro-D Series connectors utilize precision

machined contacts which are fixed within the connector body.

The female contact is an open entry design contact, precision

machined of high tensile phosphor bronze.

Six standard connector variants are offered in arrangements

of 9, 15, 25, 29, 37 and 50 contacts. Each Melo-D connector

variant is available with contact terminations for solder cup,

wrap post, and straight and 90° printed board mount termina-

tions featuring a choice of three printed board footprints. Each

E u r o -D connector variant is available with contact terminations

for solder cup, wrap post and straight and 90° printed board

mount terminations per standard European metric footprints.

Melo-D and Euro-D Series connectors are mateable and com-

patible with all D-Subminiature connectors conforming to IEC

807-2 and MIL-DTL-24308.

Awide assortment of printed board mounting hardware,

cable support hoods and locking systems is available from

stock.

Melo-D and Euro-D Series connectors conform to EIA RS

232 and RS 449, and CCITT X.24 interface connector require-

ments.

MELO-D/EURO-D SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulator: Nylon resin, UL9 4 V-0, black color.

Contacts: Male contacts – precision machined

brass alloy. Female contacts – precision

machined high tensile phosphor bronze.

Contact Plating: Professional performance Gold flash over

nickel plate. Other finishes available upon

r e q u e s t .

Shells: Steel or brass with tin plate; zinc plate

with dichromate seal.

Mounting Spacers

and Brackets: Nylon plastic, or brass with tin plate; zinc

plate with dichromate seal.

Push-On Fasteners: Phosphor bronze or beryllium copper with

tin plate.

Jackscrew Systems: Steel with zinc plate and dichromate seal,

or clear zinc plate.

Vibration Lock Systems: Slide lock and lock tabs, steel with nickel

plate.

Hoods: Thermoplastic UL 9 4 V-0. Composite,

brass or steel with zinc plate and dichro-

mate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 7.5 amperes nominal.

Initial Contact

Resistance: 0.008 ohms maximum.

Insulator Resistance: 5 G ohms.

Proof Voltage: 1000 V r.m.s.

Clearance and Creepage

Distance (minimum): 0.039 inch (1.0mm).

Working Voltage: 300 V r.m.s.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady

State: 10 days.

MECHANICAL CHARACTERISTICS:

Fixed Contacts: Size 20 contact, male contact - 0.040 inch

(1.02mm) diameter. Female contact -

rugged open entry design.

Contact Retention

In Insulator: 6 lbs. (27N)

Resistance To Solder

I r o nH e a t : 500°F (260°C) for 10 seconds duration

per IEC 512-6.

Melo-D

Contact Terminations: Solder cup contacts – 0.042 inch

(1.06mm) minimum hole diameter for 20

AWG (0.5mm2) wire maximum.

Straight Printed Board Mount – 0.028 inch

(0.71mm) diameter.

90° Printed Board Mount – 0.028 inch

(0.71mm) diameter for all printed board

footprints.

Wrap Post – 0.025 inch (0.64mm) square.

Euro-D

Contact Terminations: Solder cup contacts – 0.042 inch

(1.06mm) minimum hole diameter for 20

AWG (0.5mm2) wire maximum.

Straight Printed Board Mount – 0.024 inch

(0.60mm) diameter.

90° Printed Board Mount – 0.024 inch

(0.60mm) diameter for European Metric

Footprints.

Shells: Male shells may be dimpled for EMI/ESD

ground paths.

Polarization: Trapezoidally shaped shells and polarized

jackscrews.

Mounting To Angle Brackets: Jackscrews and riveted fasteners with a

0.120 inch (3.05mm) clearance hole, and

threaded riveted fasteners with 4-40

threads and nylon lock inserts.

Mounting To Printed Board:Rapid installation push-on fasteners and

threaded posts.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 500 operations minimum per IEC 512-5.

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

SIZE 9 SIZE 15 SIZE 25

SIZE 29 SIZE 37 SIZE 50

STANDARD SHELL ASSEMBLY

D1 D

0.050 (1.27) ±0.010 10° Typ.

0.120 (3.05) ±0.005 Ø

Mounting hole, two places

0.036 (0.91) ±0.008 0.220 (5.59)

Max.

0.120 (3.05) ±0.010

0.032 (0.81)

Total diametral float

0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available

OPTIONAL SHELLASSEMBLY WITH UNIVERSAL FLOAT MOUNTS

OPTIONAL SHELLASSEMBLY

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

9 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

9 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

15 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

15 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

25 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

25 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

29 M 1.770

(44.96) 1.274

(32.36) 1.534

(38.96) 0.450

(11.43) 0.605

(15.37) 1.322

(33.58) 0.539

(13.69) 0.217

(5.51) 0.426

(10.82)

29 F 1.770

(44.96) 1.251

(31.78) 1.534

(38.96) 0.431

(10.95) 0.605

(15.37) 1.322

(33.58) 0.539

(13.69) 0.237

(6.02) 0.429

(10.90)

37 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

37 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

50 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

50 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE.

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

SOLDER CUP CONNECTOR

Typical Part Number: M D 1 5 M 2 0 0 T 6 Z

Typical PartN u m b e r : E D 1 5 M 2 0 0 T 2 Z

Ty p i c a lP a r tN u m b e r : M D 2 5 F 3 S 6 0 T 0

Fixed male and female polarized jackscrews available.

Specify code T6 in step 7 of ordering information.

For solder cup contacts, specify

code 2 in step 4

of ordering information.

For wrap post contacts,

specify code 6 in step 4

of ordering information.

For straight printed board

mount contacts, specify

code number in step 4 of

ordering information.

Fixed female

jackscrew

Fixed female

jackscrews

20 AWG, Max.

(0.5 mm2)

0.135

(3.43) 0.352

(8.94)

Fixed male

jackscrew

STRAIGHT PRINTED BOARD MOUNT CONNECTOR

Swaged spacer with

push-on fastener,

phosphor bronze

0.010 (0.25)

Min.

Fixed female jackscrews

0.225

(5.72)

CODE

NUMBER L

30.150

(3.81)

32 0.375

(9.53)

36 0.236

(5.99)

D Ø

FERRITE INDUCTOR BAR FOR EMI/RFI NOISE SUPPRESSION

FILTERING CHARACTERISTICS

D Ø

0.028

(0.71)

0.028

(0.71)

0.024

(0.61)

FREQUENCY

*NO-LOAD CONDITION

MD25M6S50T0

Typical Part Number: MD15F600T20

WRAP POST CONNECTOR

Fixed female jackscrews

0.720

(18.29)

0.495

(12.57)

0.025

(0.64) Sq.

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Swaged spacer with

push-on fastener

phosphor bronze.

Fixed female jackscrews

Ferrite inductor bar

STRAIGHT PRINTED BOARD MOUNT CONNECTOR

90° PRINTED BOARD MOUNT CONNECTOR

MATERIAL: NICKELZINC CERAMIC.

Specify code F or Q in step 6 of ordering information.

F for ferrite inductor and Q for ferrite inductor with

push-on fastener.

0.010 (0.25) Min.

±0.005

0.135 (3.43)

SERIES CODE NO.

MD 32

MD 4

MD 59

0.375 (9.53)

------

0.240 (6.10)

------

MD 6 0.375 (9.53) 0.360 (9.14)

ED 36 0.375 (9.53) 0.101 (2.57)

ED 6 0.375 (9.53) 0.360 (9.14)

DD 32 0.515 (13.08) 0.165 (4.19)

ODD 32 0.375 (9.53) 0.165 (4.19)

ODD 5 ------ ------

HDC 32 0.375 (9.53) 0.240 (6.10)

HDC 36 0.375 (9.53) 0.101 (2.57)

HDC 6 0.375 (9.53) 0.360 (9.14)

IMPEDANCE

ATTENUATION*

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

90° PRINTED BOARD MOUNT CONNECTOR

CODE 5, 0.283 (7.19) CONTACT EXTENSION

MD005R4000 0.283 (7.19) CONTACT EXTENSION

PART NUMBER A B C D

MD905R4000 1.204

(30.58) 0.984

(24.99) 0.339

(8.61) 0.283

(7.19)

MD1505R4000 1.532

(38.91) 1.312

(33.32) 0.339

(8.61) 0.283

(7.19)

MD2505R4000 2.072

(52.63) 1.852

(47.04) 0.339

(8.61) 0.283

(7.19)

MD2905R4000 1.754

(44.55) 1.534

(38.96) 0.395

(10.03) 0.283

(7.19)

MD3705R4000 2.720

(69.09) 2.500

(63.50) 0.339

(8.61) 0.283

(7.19)

MD5005R4000 2.626

(66.70) 2.406

(61.11) 0.395

(10.03) 0.283

(7.19)

Fixed female

jackscrews

D0.112 (2.84)

Typ.

0.028 (0.71) Ø

0.112 (2.84) Typ.

0.060 (1.52) R.

0.120 (3.05) Ø 0.123

(3.12)

0.149

(3.78)

0.090

(2.29)

0.240

(6.10)

0.112 (2.84) Typ.

Numbering shown is rear view

of male and face view of female.

0.160 (4.06)

Nominal

Push-on fastener

beryllium copper

Specify code 5 in

step 4 of ordering

information.

0.125 (3.18) X 0.233

(5.92) Oval hole typ.

0.112 (2.84)

Typ.

0.028 (0.71) Ø

0.112 (2.84) Typ.

Numbering shown is rear view

of male and face view of female.

0.125 (3.18)

Nominal

Typical Part Number:

MD25M59B0T2X Typical Part Number:

MD29M59B0T2X

Specify code 59 in

step 4 of ordering

information.

Fixed

female

jackscrews

±0.008

Typical Part Number:

MD50M5R4NT2X

Typical Part Number:

MD25M5R4NT2X

PLASTIC MOUNTING BRACKET AVAILABLE

Specify code B7 or B8 in step 5

of ordering information.

90° PRINTED BOARD MOUNT CONNECTOR

CODE 59, 0.545 (13.84) CONTACT EXTENSION

MD50059B000 2.626

(66.70) 2.406

(61.11) 0.275

(6.99) 0.545

(13.84)

PART NUMBER A B C D

MD9059B000 1.204

(30.58) 0.984

(24.99) 0.275

(6.99) 0.545

(13.84)

MD15059B000 1.532

(38.91) 1.312

(33.32) 0.275

(6.99) 0.545

(13.84)

MD25059B000 2.072

(52.63) 1.852

(47.04) 0.275

(6.99) 0.545

(13.84)

MD29059B000 1.754

(44.55) 1.534

(38.96) 0.275

(6.99) 0.545

(13.84)

MD37059B000 2.720

(69.09) 2.500

(63.50) 0.275

(6.99) 0.545

(13.84) 0.657

(16.69)

0.601

(15.27)

0.601

(15.27)

0.601

(15.27)

0.657

(16.69)

0.601

(15.27)

MD0059B000 0.545 (13.84) CONTACT EXTENSION

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

90° PRINTED BOARD MOUNT CONNECTOR

CODE 4, 0.450 (11.43) CONTACT EXTENSION

90° AND STRAIGHT PRINTED BOARD

CONTACT HOLE PATTERN

Hole identification shown for male connector, use mirror image for female connector.

Mount connector with mating face positioned to follow direction of arrow.

0.125 (3.18) Ø

Typ.

0.112 (2.84)

Typ.

0.112 (2.84) Typ.

0.094 (2.39) Ø

PLASTIC MOUNTING BRACKET AVAILABLE

Specify code B7 or B8 in step 5

0.120 (3.05) Ø

0.060 (1.52) R.

0.149

(3.78)

0.123

(3.12)

0.112

(2.84)

0.277

(7.04)

0.240

(6.10)

0.112 (2.84) Typ.

0.028 (0.71) Ø

0.160 (4.06)

Nominal

Numbering shown is rear view of

male and face view of female.

Fixed female

jackscrews

Specify code 4 in

step 4 of ordering

information.

Typical Part Number:

MD25M4B0T20 Typical Part Number:

MD50M4B0T20

± 0 . 0 0 8

of ordering information.

MD004B000 0.450 (11.43) CONTACT EXTENSION

MD5004B000 2.626

(66.70) 2.406

(61.11) 0.562

(14.27) 0.450

(11.43)

PART NUMBER A B C D

MD904B000 1.204

(30.58) 0.984

(24.99) 0.506

(12.85) 0.450

(11.43)

MD1504B000 1.532

(38.91) 1.312

(33.32) 0.506

(12.85) 0.450

(11.43)

MD2504B000 2.072

(52.63) 1.852

(47.04) 0.506

(12.85) 0.450

(11.43)

MD2904B000 1.754

(44.55) 1.534

(38.96) 0.562

(14.27) 0.450

(11.43)

MD3704B000 2.720

(69.09) 2.500

(63.50) 0.506

(12.85) 0.450

(11.43)

0.492

(12.50)

0.224

(5.69)

0.767

(19.48) 0.432

(10.97)

0.486

(12.34)

0.216

(5.49) 0.656

(16.66) 0.926

(23.52) 0.652

(16.56)

1.203

(30.56) 0.870

(22.10)

0.815

(20.70)

0.598

(15.19)

0.112

(2.84)

0.112

(2.84)

0.112

(2.84)

0.112

(2.84)

0.224

(5.69)

1.250

(31.75) 0.978

(24.84)

0.924

(23.47)

0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.108 Typ.

(2.74)

0.055 Typ.

(1.40)

0.055 Typ.

(1.40)

0.055 Typ.

(1.40)

0.054 Typ.

(1.37)

0.378

(9.60)

0.324

(8.23)

0.108 Typ.

(2.74) 0.054 Typ.

(1.37)

0.108 Typ.

(2.74)

0.054 Typ.

(1.37) 0.112

(2.84) 0.112

(2.84)

Sym. Sym. Sym.

Sym.

0.162

(4.11)

MD9 MD15 MD25

MD50

MD37

MD29

Suggest 0.045 (1.14) Ø hole for contact termination positions.

Suggest 0.123 ±0.003 (3.12) Ø hole for mounting connector with push-on fasteners. DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

WITH METRIC DIMENSIONED TERMINATIONS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

90° PRINTED BOARD MOUNT CONNECTOR

CODE 42 AND 52, 0.370 (9.40) CONTACT EXTENSION

90° PRINTED BOARD MOUNT CONNECTOR

CODE 44, 0.370 (9.40) CONTACT EXTENSION

0.125 (3.18) Ø Typ.

0.024 (0.61) Ø

0.024 (0.60) Ø

0.100 (2.54) Typ.

0.197 (5.00)

Max.

Fixed female

jackscrews

Push-on fastener,

beryllium copper.

0.100 (2.54)

Typ.

±0.008

0.060 (1.52) R.

0.120 (3.05) Ø

0.090

(2.29)

0.123

(3.12)

0.149

(3.78)

0.240

(6.10)

0.197 (5.00) Max.

Fixed female

jackscrews

0.100 (2.54) Typ.

for code 42 contacts

0.112 (2.84) Typ.

for code 52 contacts

0.100 (2.54) Typ.

for code 42 contacts

0.112 (2.84) Typ.

for code 52 contacts

0.100 (2.54) Typ.

for code 42 contacts

0.112 (2.84) Typ.

for code 52 contacts

Numbering shown is rear view

of male and face view of female.

Numbering shown is rear view

of male and face view of female.

Specify code 42

or 52 in step 4 of

ordering information.

Specify code 44

in step 4 of ordering

information.

Typical Part Number:

ED25M42B0T2X

Typical Part Number:

ED25M44BNT2X

Typical Part Number:

ED50M52B0T2X

Typical Part Number:

ED29M44BNT2X

±0.008

PLASTIC MOUNTING BRACKET AVAILABLE

Specify code B7 or B8 in step 5

of ordering information.

ED00*B000 0.370 (9.40) CONTACT EXTENSION

ED500*B000 2.626

(66.70) 2.406

(61.11) 0.470

(11.94) 0.370

(9.40)

PART NUMBER A B C D

ED90*B000 1.204

(30.58) 0.984

(24.99) 0.420

(10.67) 0.370

(9.40)

ED150*B000 1.532

(38.91) 1.312

(33.32) 0.420

(10.67) 0.370

(9.40)

ED250*B000 2.072

(52.63) 1.852

(47.04) 0.420

(10.67) 0.370

(9.40)

ED290*B000 1.754

(44.55) 1.534

(38.96) 0.470

(11.94) 0.370

(9.40)

ED370*B000 2.720

(69.09) 2.500

(63.50) 0.420

(10.67) 0.370

(9.40)

0.060 (1.52) R.

0.120 (3.05) Ø

0.090

(2.29)

0.123

(3.12)

0.149

(3.78)

0.240

(6.10)

PLASTIC MOUNTING BRACKET AVAILABLE

Specify code B7 or B8 in step 5

of ordering information.

ED0044B000 0.370 (9.40) CONTACT EXTENSION

ED50044B000 2.626

(66.70) 2.406

(61.11) 0.470

(11.94) 0.370

(9.40)

PART NUMBER A B C D

ED9044B000 1.204

(30.58) 0.984

(24.99) 0.420

(10.67) 0.370

(9.40)

ED15044B000 1.532

(38.91) 1.312

(33.32) 0.420

(10.67) 0.370

(9.40)

ED25044B000 2.072

(52.63) 1.852

(47.04) 0.420

(10.67) 0.370

(9.40)

ED29044B000 1.754

(44.55) 1.534

(38.96) 0.470

(11.94) 0.370

(9.40)

ED37044B000 2.720

(69.09) 2.500

(63.50) 0.420

(10.67) 0.370

(9.40)

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

WITH METRIC DIMENSIONED TERMINATIONS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

90° AND STRAIGHT PRINTED BOARD

CONTACT HOLE PATTERN

Hole identification shown for male connector, use mirror image for female connector.

For code 42 and 52 contacts, mount connector with mating face positioned to follow direction of arrow.

For code 44 contacts, mount connector with mating face positioned to oppose direction of arrow.

Sym.

0.492

(12.50) 0.216

(5.49)

0.656

(16.66) 0.926

(23.52)

1.203

(30.56)

1.250

(31.75) 0.978

(24.84)

0.432

(10.97)

0.486

(12.34)

0.767

(19.48) 0.870

(22.10)

0.815

(20.70)

0.924

(23.47)

0.652

(16.56)

0.378

(9.60)

0.324

(8.23)

0.112

(2.84)

0.598

(15.19)

0.162

(4.11)

0.108 Typ.

(2.74)

0.054 Typ.

(1.37) 0.108 Typ.

(2.74) 0.055 Typ.

(1.40)

0.055 Typ.

(1.40)

0.055 Typ.

(1.40)

0.054 Typ.

(1.37)

0.054 Typ.

(1.37) 0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.108 Typ.

(2.74)

ED9 ED15 ED25

ED50

ED37

ED29

Suggest 0.040 (1.02) Ø hole for contact termination positions.

Suggest 0.123 ±0.003 (3.12) Ø hole for mounting connector with push-on fasteners.

CODE

NUMBER X Y

36 0.112

(2.84) 0.224

(5.69)

42 0.100

(2.54) 0.200

(5.08)

44 0.100

(2.54) 0.200

(5.08)

52 0.112

(2.84) 0.224

(5.69)

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

STEP 1 - Basic Series

STEP 2 -

ED Series Connector Variants

9, 15, 25, 29, 37, 50

STEP 3 - Connector Gender

M – Male

F – Female

STEP 4 - Type of Contacts

ED Series

0 – None.

V3 – Lock Tab, connector front panel mounted.

V5 – Lock Tab, connector rear panel mounted.

VL – Lock Lever, used with Hoods only.

T – Fixed Female Jackscrews.

T2 – Fixed Female Jackscrews.

T6 – Fixed Male and Female Polarized

Jackscrews.

E – Rotating Male Jackscrews.

E2 – Rotating Male Screw Locks.

E6 – Rotating Male and Female Polarized

Jackscrews.

PROFESSIONAL QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

MD/ED

Series

ORDERING INFORMATION – CODE NUMBERING SYSTEM

STEP

STEP 1 - Basic Series

STEP 2 -

MD Series Connector Variants

9, 15, 25, 29, 37, 50

STEP 3 - Connector Gender

M – Male

F – Female

STEP 4 - Type of Contacts

2 – Solder cup.

3 – Solder, Straight Printed Board Mount

with 0.150 (3.81) Tail Length.

32 – Solder, Straight Printed Board Mount

with 0.375 (9.52) Tail Length.

4 – Solder, 90° Printed Board Mount with

0.450 (11.43) Contact Extension.

5 – Solder, 90° Printed Board Mount with

0.283 (7.19) Contact Extension.

59 – Solder, 90° Printed Board Mount with

0.545 (13.84) Contact Extension.

6 – Wrap Post.

2 – Solder cup.

36 – Solder, Straight Printed Board Mount

with 0.236 (5.99) Tail Length.

42 – Solder, 90° Printed Board Mount with

0.370 (9.40) Contact Extension.

44 – Solder, Inverted 90° Printed Board

Mount with 0.370 (9.40) Contact

Extension.

52 – Solder, 90° Printed Board Mount with

0.370 (9.40) Contact Extension.

*STEP 7 - Locking and Polarizing Systems

*STEP 6 - Hoods and Push-On Fasteners

*STEP 6 - Hoods and Push-On

Fasteners

0 – None.

J – Hood, Top Opening, Plastic.

L – Hood, Side Opening, Plastic.

Y – Hood, Top Opening, Plastic with Rotating Male Jackscrews. Available in size 50

only.

Y6 – Hood, Top Opening, Plastic with Rotating Male and Female Polarized Jackscrews.

Available in size 50 only.

Z – Hood, Top or Side Opening, Robust and Extended Height, Composite and Plastic

with Rotating Male Jackscrews. Available in size 9, 15, 25, 37, and 50 only.

H – Hood, Top Opening, Metal. Available in size 15, 25, 37, and 50 only.

G – Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and 50 only.

W – Hood, Top or Side Opening, Plastic. Available in size 9, 15, and 25 only.

N – Push-on Fastener, for 90° Mounting Brackets.

**F – Ferrite inductor.

**Q – Ferrite inductor for use with Push-on Fastener and 90° Mounting Brackets.

STEP 8 - Shell Options

0 – Zinc Plated, with Dichromate Seal.

X – Tin Plated.

Z – Tin Plated and Dimpled.

*STEP 5 - Mounting Style

0 – Mounting Hole, 0.120 (3.05) Ø.

B – Bracket, Mounting, 90° Metal.

B3 – Bracket, Mounting, 90° Metal with

Cross Bar.

B7 – Bracket, Mounting, 90° Plastic.

B8 – Bracket, Mounting, 90° Plastic with

Cross Bar.

F – Float Mounts, Universal.

P – Threaded Post, Brass, 0.225 (5.71) Length.

P2 – Threaded Post, Nylon, 0.225 (5.71) Length.

R – Bracket, Mounting, 90° Metal, Swaged to

Connector with 4-40 Thread Fixed Female

Jackscrews.

R2 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 4-40 Thread Fixed Female

Jackscrews with Cross Bar.

R3 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 0.120 (3.05) Ø Mounting

Hole.

R4 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 4-40 Threads.

R5 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 4-40 Locknut.

R6 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 0.120 (3.05) Ø Mounting

Hole with Cross Bar.

R7 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 4-40 Threads with Cross Bar.

R8 – Bracket, Mounting, 90° Metal, Swaged to

Connector with 4-40 Locknut with Cross Bar.

S – Swaged Spacer, 4-40 Threads, 0.225 (5.71)

Length.

S2 – Swaged Spacer, 4-40 Threads, 0.125 (3.18)

Length.

S5 – Swaged Locknut, 4-40 Threads.

S6 – Swaged Spacer with Push-on Fastener,

4-40 Threads, 0.225 (5.71) Length.

S7 – Swaged Spacer with Push-on Fastener for

use with Ferrite Inductor, 4-40 Threads,

0.375 (9.53) Length.

*STEP 5 - Mounting Style

Refer to MD Series Step 5

S T E P 9 - Special Options

Consult Sales Department.

Refer to MD Series Step 7

Refer to MD Series Step 6

*STEP 7 - Locking and Polarizing

Systems

STEP 8 - Shell Options

0 – Zinc Plated, with Dichromate

Seal.

X – Tin Plated.

Z – Tin Plated and Dimpled.

S T E P 9 - Special Options

Consult Sales Department

MD Series

*For additional information on accessories

listed in steps 5, 6 and 7, see Accessory

Catalog.

**Ferrite inductor is available on contact

types 36 only.

*For additional information on accessories listed in

steps 5, 6 and 7, see Accessory Catalog.

**Ferrite inductor is available on contact types 32, 4,

59 and 6 only.

1 2 3

MD 25 F

123

ED 25 F

MELO-D SERIES

EURO-D SERIES

Specify Complete Connector

By Following

Steps 1 through 9

Insert “0” When Step Is Not Used

Size 20 Contacts,

Removable

Professional Quality

Connectors

IEC Publication 807-3

Performance Level Two

U.L. Recognized CSA Recognized

File #E49351 File #LR54219

Telecommunication

U.L. File #14098

Soli-D Series connectors are professional quality connectors

recommended for use in sheltered, non-corrosive indoor or out-

door environments having normal ventilation, but without tem-

perature or humidity controls. This crimp removable contact

connector will meet the Performance Level Two requirements

of IEC 807-3.

Soli-D Series connectors utilize precision machined contacts

with closed barrel, crimp terminations. The female contact fea-

tures the Robi-Contact open entry design. Other contact ter-

minations such as solder cup and printed board terminations

are also available. The removable contact feature provides for

rapid assembly and permits contact repairs on wiring changes.

Five standard contact variants are offered in arrangements

of 9, 15, 25, 37 and 50 contacts. Soli-D Series connectors are

mateable and compatible with all D-Subminiature connectors

conforming to IEC 807-2, IEC 807-3 and MIL-DTL-24308.

Awide assortment of cable support hoods and locking sys-

tems is available from stock.

Soli-D Series connectors conform to EIA RS 232 and RS

449, and CCITT X.24 interface connection requirements.

SOLI-D SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulator: Glass filled nylon resin, UL 9 4 V-0, black

c o l o r.

Contacts: Male contacts – precision machined

brass alloy. Female contacts – preci-

sion machined high tensile phosphor

bronze.

Contact Plating: Professional performance – gold flash

over nickel plate. Other finishes available

upon request.

Shells: Steel or brass with tin plate; zinc plate

with dichromate seal.

Mounting Spacers: Nylon plastic, or brass, zinc plate with

dichromate seal.

Push-On Fasteners: Phosphor bronze with tin plate.

Jackscrew Systems: Steel with zinc plate and dichromate

seal, or clear zinc plate.

Vibration Lock Systems: Slide lock and lock tabs, steel with nick-

el plate.

Hoods: Thermoplastic UL 94V-0. Composite,

brass or steel with zinc plate and

dichromate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 7.5 amperes nominal.

Initial ContactResistance: 0.008 ohms maximum.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.039 inch (1.0mm).

Working Voltage: 300 V r.m.s.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady State: 10 days.

MECHANICAL CHARACTERISTICS:

Removable Contacts: Insert contact to rear face of insulator and

release from rear face of insulator. Size

20 contacts, male – 0.040 inch (1.02mm)

diameter; female – Robi-D contact open

entry design.

Contact Retention

In Insulator: 6 lbs. (27 N).

Contact Terminations: Closed barrel crimp, wire sizes 18 AWG

(1.0mm2) through 32 AWG (0.03mm2) .

Also, solder cup and straight printed

board mount terminations.

Shells: Male shells may be dimpled for EMI/ESD

ground paths.

Polarization: Trapezoidally shaped shells and polar-

ized jackscrews.

Printed Board Mount: Rapid installation push-on fasteners.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 500 operations minimum per IEC 512-5.

PROFESSIONAL QUALITY, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Soli-D

Series

PROFESSIONAL QUALITY, REMOVABLE CONTACT,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

SD 9 SD 15 SD 25

SD 37 SD 50

STANDARD SHELL ASSEMBLY

D1 D

0.050 (1.27) ±0.010

0.120 (3.05) ±0.005 Ø Mounting hole,

two places

10° Typ.

0.437

(11.10)

Max.

0.036 (0.91) ±0.008

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

SD 9 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

SD 9 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

SD 15 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

SD 15 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

SD 25 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

SD25 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

SD 37 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

SD37 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

SD50 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

SD50 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available

0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

OPTIONALSHELLASSEMBLYOPTIONAL SHELLASSEMBLYWITH UNIVERSALFLOAT MOUNTS

0.120 (3.05) ±0.010

0.032 (0.81)

Total diametral float

PROFESSIONAL QUALITY, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

CRIMP CONTACTS

CLOSED CRIMP BARREL

FEMALE CONTACT

18 AWG (1.0 mm2) max.

MALE CONTACT

18 AWG (1.0 mm2) max.

MALE CONTACT

C Ø C Ø

0.170

(4.32) 0.170

(4.32)

0.040 Ø

(1.02)

B Ø B Ø

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

FC7520D 20 / 22 / 24

(0.5/0.3/0.25) 0.612

(15.54) 0.045

(1.14) 0.066

(1.68)

FC7526D 26 / 28 / 30

(0.12/0.08/0.05) 0.612

(15.54) 0.026

(0.66) 0.066

(1.68)

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

MC7520D 20 / 22 / 24

(0.5/0.3/0.25) 0.618

(15.70) 0.045

(1.14) 0.066

(1.68)

MC7526D 26 / 28 / 30

(0.12/0.08/0.05) 0.618

(15.70) 0.026

(0.66) 0.066

(1.68)

Crimp contacts must be ordered separately.

0.915

(23.25) 0.927

(23.55)

0.055 Ø

(1.40)

0.055 Ø

(1.40)

0.086 Ø

(2.18)

0.086 Ø

(2.18)

0.040 Ø

(1.02)

0.170

(4.32) 0.170

(4.32)

MC7518DFC7518D

Material – Phosphor bronze.

Plating – Gold flash over nickel.

Material – Brass.

Plating – Gold flash over nickel.

REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS

Contacts may be supplied in plastic carriers, packaged in reels holding 2,000

contacts for use with the automatic feed pneumatic crimp tools, catalog part num-

ber 9550-1. The same type carrier is used for both male and female contacts.

All male and female crimp contacts can be ordered in reels by adding letter “R”

after the contact part number, such as MC7526DR for a male contact and

FC7520DR for a female contact.

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Enlarged section of plastic contact carriers

PROFESSIONAL QUALITY, REMOVABLE CONTACT,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

FEMALE CONTACT MALE CONTACT

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE. Material – Phosphor bronze or brass.

Plating – Gold flash over nickel.

STRAIGHT PRINTED BOARD MOUNT CONTACTS

D Ø

L Nominal

D Ø

0.040 Ø

(1.02)

Straight printed board mount contacts are supplied in connector.

For straight printed board mount

contacts specify code no. in step 4

of ordering information.

CODE

NUMBER L D Ø A

30.125

(3.18) 0.024

(0.61) 0.772

(19.61)

32 0.188

(4.78) 0.024

(0.61) 0.835

(21.21)

CODE

NUMBER L D Ø A

30.125

(3.18) 0.024

(0.61) 0.768

(19.51)

32 0.188

(4.78) 0.024

(0.61) 0.831

(21.11)

Fixed female

jackscrews

Swaged spacer with

push-on fastener

phosphor bronze.

0.437 (11.10)

Typical Part Number:

SD37F3S60T2X

PROFESSIONAL QUALITY, REMOVABLE CONTACT,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

STRAIGHT PRINTED BOARD CONTACT HOLE PATTERN

Hole identification shown for male connector, use mirror image for female connector.

0.492

(12.50)

0.112

(2.84) 0.112

(2.84)

0.112

(2.84)

0.112

(2.84) 0.224

(5.69)

0.656

(16.66) 0.652

(16.56)

0.926

(23.52)

0.378

(9.60)

0.324

(8.23) 0.598

(15.19)

0.815

(20.70)

0.924

(23.47)

0.870

(22.10)

0.978

(24.84)

1.203

(30.56)

1.250

(31.75)

0.162

(4.11)

0.054 Typ.

(1.37)

0.108 Typ.

(2.74)

0.108 Typ.

(2.74)

0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.054 Typ.

(1.37)

0.055 Typ.

(1.40)

0.055 Typ.

(1.40)

0.055 Typ.

(1.40)

0.216 (5.49)

Sym.

Sym. Sym.

Sym.

SD9 SD15 SD25

SD50

SD37

Suggest 0.045 (1.14) Ø hole for contact termination positions.

Suggest 0.123 ±0.003 (3.12) Ø hole for mounting connector with push-on fasteners.

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

SD25F3S600XSD37M3S600Z

PROFESSIONAL QUALITY, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

CRIMPING INFORMATION FOR RD AND SD SERIES CRIMP CONTACTS

USE INDICATED POSITRONIC TOOLS FOR BEST RESULTS

Step 1: Strip wire to indicated length.

Step 2: Crimp wire to contact. For Hand Crimp Tool: - Place contact into crimping tool.

- Insert wire into contact.

-Center contact by slowly closing the

crimping tool until the crimp indenters

make contact with the crimp barrel.

-Complete the cycle of the crimping tool in

one smooth motion.

- Remove the crimped contact.

Take Care Not To: - Damage or remove strands.

- Untwist or overtwist strands.

- Leave insulation particles on strands.

- Damage insulation.

For Automatic Feed Pneumatic Crimp Tool: - Insert the wire into the contact, positioned in the

crimp tool by the plastic carrier.

-Depress the activating device of the crimping

tool to start the crimping cycle.

- Remove the crimped contact.

0.160

(4.06)

Insulation

Stranded Wire

Strands damaged

or removed by

stripping tool.

Insulation cut

incorrectly.

Strands overtwisted.

Particles of

insulation on the

stripped part of

the wire.

Wire insulation

damaged.

Strands untwisted.

Examples of Stripping Faults

Correctly Stripped Wire

±0.020

PROFESSIONAL QUALITY, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

CRIMPING INFORMATION FOR RD AND SD CRIMP CONTACTS

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Conductor tensile strength values are derived using silver-tin

plated copper wires.

Values may change depending upon what type of wire is used.

Wire Insulation, Typical

Crimp to meet recommended

tensile strength.

Stripped wires compressed

for improved conduction. 8 Crimp

Indents

Crimp indents too close

to inspection hole.

Strands not visible

through inspection hole.

Strands visible beyond

insulation support.

Stripped part of

the wire too long. Stripped part of the

wire too short. Crimp indents

incorrectly located.

Step 3: Inspect the crimp. For All Tools: - Strands to be visible through the inspection hole.

-Strands not to be visible beyond the insulation support.

-Crimped contact to meet recommended conductor tensile

force shown in chart.

-Check for peeled gold and bent contacts.

Correctly Crimped Contact

Cross Section

of Correctly Crimped Contact

Examples of Crimping Faults

Positronic Recommended

Conductor Tensile Strength

Positronic recommended tools for SD series contacts.

For more information see contact crimp tools and accessories page.

CRIMP TOOLS POSITIONERS FOR

FC7520D, FC7526D,

MC7520D, MC7526D

POSITIONERS FOR

FC7518D, MC7518D,

FC6018D, MC6018D

9507, HAND CRIMP TOOL 9502-10 9502-11

9550-1, AUTOMATIC FEED

PNEUMATIC CRIMP TOOL Supplied in reels Not Available

WIRE SIZE

AWG/(mm2)AXIALLOAD

POUNDS/(N)

(0.5) 20

(89)

(0.25) 8

(36)

(0.3) 12

(53)

(0.12) 5

(22)

(1.0) 28

(125)

(0.08) 3

(13)

(0.05) 1.5

(6.7)

PROFESSIONAL QUALITY, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

*For additional information on accessories listed in

steps 5, 6 and 7, see Accessory Catalog.

1 2 3 4 5 6

SD 25 F 3 S6 0 T6

STEP

STEP 1 - Basic Series

SDSeries

STEP 2 - SD Series Connector Variants

9, 15, 25, 37, 50

STEP 3 - Connector Gender

M - Male

F - Female

STEP 4 - Type of Contacts

0 - Order Contacts separately.

1 - Crimp, 20 AWG–24 AWG (0.5mm2–0.25mm2).

12 - Crimp, 26 AWG–30 (0.12mm2–0.05mm2).

3 - S o l d e r, Straight Printed Board Mount with 0.125 (3.18) Tail Length.

3 2 -S o l d e r, Straight Printed Board Mount with 0.188 (4.78) Tail Length.

*STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab, connector front panel mounted.

V5 - Lock Tab, connector rear panel mounted.

VL - Lock Lever, used with Hoods Only.

T - Fixed Female Jackscrews.

T2 - Fixed Female Jackscrews.

T6 - Fixed Male and Female Polarized Jackscrews.

E - R o t a t i n g Male Jackscrews.

E 2 - Rotating MaleScrew Locks.

E 6 - Rotating Male and Female Polarized Jackscrews.

*STEP 6 - Hoods

0 - None.

J - Hood, Top Opening, Plastic.

L- Hood, Side Opening, Plastic.

Y- Hood, Side Opening, Plastic with Rotating Male

Jackscrews. Available in size 50 only.

Y6 - Hood, Top Opening, Plastic with Rotating Male

and Female Polarized Jackscrews. Available in

size 50 only.

Z - Hood, Top or Side Opening, Robust and Extended

Height, Composite and Plastic with Rotating Male

Jackscrews.

H - Hood, Top Opening, Metal. Available in size 15,

25, 37, and 50 only.

G - Hood, EMI/RFI, Metal.

W - Hood, Top or Side Opening, Plastic. Available in

size 9,15, and 25 only.

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

X - Tin Plated.

Z - Tin Plated and Dimpled.

*STEP 5 - Mounting Style

0 - Mounting Hole, 0.120 (3.05) Ø.

F - Float Mounts, Universal.

P - Threaded Post, Brass, 0.437 (11.10) Length.

P2 - Threaded Post, Nylon, 0.437 (11.10) Length.

S - Swaged Spacer, 4-40 Threads, 0.437 (11.10) Length.

S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length.

S5 - Swaged Locknut, 4-40 Threads.

S6 - Swaged Spacer with Push-onFastener, 4-40 Threads,

0.437 (11.10) Length.

S T E P 9 - Special Options

Consult Sales Department.

Specify Complete Connector By Following Steps 1 Through 9.

Insert “0” When Step Is Not Used.

ORDERING INFORMATION - CODE NUMBERING SYSTEM

TERMINATION

TYPE WIRE SIZE

AWG/(mm2)FEMALE PA R T

NUMBER MALE PART

NUMBER

CRIMP 20 / 22 / 24

(0.5/0.3/0.25) FC7520D MC7520D

CRIMP 26 / 28 / 30

(0.12/0.08/0.05) FC7526D MC7526D

CONTACT

SIZE

SD SERIES CRIMP

CONTACT TERMINATIONS

PROFESSIONAL QUALITY, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

Series

AUTOMATIC FEED

CRIMP TOOL,

PNEUMATICALLY ACTUATED

Part No. 9550-1

MINIATURE STEP ADJUSTABLE TOOL

(M22520/2-01)

Part No. 9507

INSERTION/REMOVAL TOOL

(M81969/1-02)

This fast cycling automatic feed crimp tool produces an 8

indent crimp on wire sizes 20 AWG (0.5mm2) through 32

AWG (0.03mm2). Soli-D Series contacts must be ordered on

reels.

To order, specify part number 9550-1. Foot control valve is

supplied as a standard accessory.

This miniature 8 step adjustable hand crimping tool produces

an 8 indent crimp configuration and will crimp wire sizes 18

AWG (1.0mm2) through 32 AWG (0.03mm2).

To crimp wire size 18 AWG (1.0mm2), order contact position-

er 9502-11. To crimp wire size 20 AWG (0.5mm2) through 32

AWG (0.03mm2), order contact positioner 9502-10. Each

positioner is equipped with a data plate which gives the cor-

rect crimp-depth setting for each wire size, and must be used

with 9507 tool frame for best results when crimping Soli-D

Series contacts.

One end of this tool is used to insert contacts into Soli-D

Series connectors. The other end is used to extract contacts.

This is accomplished by sliding the extraction tip down the

wire into the connector until it bottoms against the contact. A

slight rotation while pushing will release the contacts, which

are then extracted by simultaneously pulling on the wire.

Size 22 Contacts,

Removable Crimp and

Printed Board Mount

Military/Industrial

Quality Connectors

MIL-DTL-24308 and MIL-C-39029

U.L. Recognized CSA Recognized

File #E49351 File #LR54219

Telecommunication

U.L. File #14098

Densi-D Series connectors are Military/Industrial quality,

high density rectangular connectors designed for use in shel-

tered, mildly corrosive environments having a wide range of

temperature, pressure and humidity changes. These crimp

removable contact connectors are qualified to MIL-DTL-24308

and MIL-C-39029.

Densi-D Series connectors utilize precision machined con-

tacts with closed barrel crimp terminations and solder cup ter-

minations for straight and 90° printed board mount. All female

contacts are of closed entry design, featuring a fluted stainless

steel shroud.

Six standard contact variants are offered in arrangements of

15, 26, 44, 62, 78 and 104 contacts. Densi-D Series connec-

tors are mateable and compatible with other high density D-

Subminiature connectors conforming to MIL-DTL-24308.

Awide assortment of mounting spacers, cable support

hoods and locking systems is available from stock.

DENSI-D SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulators: Glass filled polyester per MIL-M-24519,

U L9 4 V-0, blue color.

Contacts: Male contacts – precision machined

high tensile copper alloy. Female con-

tacts – precision machined high tensile

copper alloy with stainless steel shroud.

Contact Plating: Military performance – 0.000050 inch

(1.25 microns) gold over copper plate.

Industrial performance – gold flash over

nickel plate. Other finishes available upon

r e q u e s t .

Shells: Steel or brass with tin plate; zinc and

cadmium plate with dichromate seal,

stainless steel, passivated.

Mounting Spacers: Nylon plastic and brass; zinc plate with

dichromate seal.

Push-OnFastener: Phosphor bronze or beryllium copper with tin

p l a t e.

Vibration Lock Systems: Slide lock and lock tabs, steel with nick-

el plate.

Jackscrew Systems: Steel with zinc plate and dichromate

seal, or clear zinc plate.

Hoods: Thermoplastic UL 94V-0. Composite,

brass or steel with zinc plate and

dichromate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 5 amperes nominal.

Initial Contact Resistance: 0.005 ohms maximum.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.042 inch (1.06mm).

Working Voltage: 300 V r.m.s.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady State: 21 days.

MECHANICAL CHARACTERISTICS:

Removable Contacts: Insert contact to rear face of insulator and

release from rear face of insulator. Size

22 contacts, male – 0.030 inch (0.76mm)

diameter; female – closed entry design

with stainless steel shroud.

Contact Retention

In Insulator: 9 lbs. (40 N).

Contact Terminations: Closed barrel crimp, wire sizes 22 AWG

(0.3mm2) through 30 AWG (0.05mm2)

per IEC 352-2.

90° Printed Board Mount contact termi-

n a t i o n s .

Shells: Male shells may be dimpled for EMI/ESD

ground paths.

Polarization: Trapezoidally shaped shells and polar-

ized jackscrews.

Mounting To

Angle Brackets: Jackscrews and riveted fasteners with

0.120 inch (3.05mm) clearance hole,

and threaded riveted fasteners with 4-40

threads and nylon lock inserts.

Mounting To

Printed Board: Rapid installation push-on fasteners and

mounting posts.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 1000 operations minimum per IEC 512-5.

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Densi-D

Series

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS

Series

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

DD 15 DD 26 DD 44

DD 104

DD 78

DD 62

STANDARD SHELL ASSEMBLY

D1 D

0.050 (1.27) ±0.010

0.120 (3.05) ±0.005 Ø Mounting hole,

two places

10° Typ.

0.375

(9.53)

Max.

0.036 (0.91) ±0.008

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available

0.120 (3.05) ±0.010

0.032 (0.81)

Total diametral float

OPTIONAL SHELLASSEMBLYOPTIONAL SHELLASSEMBLY WITH UNIVERSAL FLOAT MOUNTS

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

DD 15 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

DD 15 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

DD 26 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

DD 26 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

DD 44 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

DD44 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

DD 62 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

DD62 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

DD78 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

DD78 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

DD104 M 2.729

(69.32) 2.212

(56.18) 2.500

(63.50) 0.503

(12.78) 0.668

(16.97) 2.302

(58.47) 0.596

(15.14) 0.230

(5.84) 0.426

(10.82)

DD104 F 2.729

(69.32) 2.189

(55.60) 2.500

(63.50) 0.485

(12.32) 0.668

(16.97) 2.302

(58.47) 0.596

(15.14) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE.

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

CRIMP CONTACTS

CLOSED CRIMP BARREL

FEMALE CONTACT (“CLOSED ENTRY” DESIGN) MALE CONTACT

C Ø

Stainless Steel Shroud

0.030 Ø

(0.76)

*Color Code *Color Code

B Ø

C Ø

B Ø

0.150

(3.81) 0.150

(3.81)

A A

Crimp contacts may be supplied kitted with connector or ordered separately.

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

FC8022D 22 / 24 / 26 / 28 / 30

(0.3/0.25/0.12/0.08/0.05) 0.518

(13.16) 0.035

(0.89) 0.047

(1.19)

*M39029/57-354 22 / 24 / 26 / 28

(0.3/0.25/0.12/0.08) 0.518

(13.16) 0.035

(0.89) 0.047

(1.19)

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

MC8022D 22 / 24 / 26 / 28 / 30

(0.3/0.25/0.12/0.08/0.05) 0.531

(13.49) 0.035

(0.89) 0.047

(1.19)

*M39029/58-360 22 / 24 / 26 / 28

(0.3/0.25/0.12/0.08) 0.531

(13.49) 0.035

(0.89) 0.047

(1.19)

Material - Leaded nickel copper.

Plating -Gold flash over nickel or 0.000050 inch (1.25µ) gold

over copper for military specification contacts.

*Color Code -ORANGE/GREEN/YELLOW for military

specification contacts.

Material - Phosphor bronze.

Plating -Gold flash over nickel.

Material - Brass.

Plating -Gold flash over nickel.

Material - Brass.

Plating -Gold flash over nickel or 0.000050 inch (1.25µ) gold

over copper for military specification contacts.

*Color Code -ORANGE/BLUE/BLACK for military

specification contacts.

For contact crimp tool information see page 29.

Solder contacts may be supplied kitted with connector or ordered separately.

Enlarged section of plastic contact carriers

SOLDER CUP CONTACTS

FEMALE CONTACT (“CLOSED ENTRY” DESIGN) MALE CONTACT

0.047 Ø

(1.19) 0.047 Ø

(1.19)

0.030 Ø

(0.76)

0.035 Ø

(0.89) 0.035 Ø

(0.89)

Stainless steel shroud

0.518

(13.16) 0.531

(13.49)

0.150

(3.81) 0.150

(3.81)

Part Number: MS8022DPart Number: FS8022D

REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS

Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for

use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The same

type carrier is used for both male and female contacts.

All male and female crimp contacts can be ordered in reels by adding letter “R” after the con-

tact part number, such as MC8022DR for a male contact and FC8022DR for a female contact.

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

STRAIGHT PRINTED BOARD MOUNT CONTACTS

FEMALE CONTACT (“CLOSED ENTRY” DESIGN) MALE CONTACT

D Ø D Ø

0.030 Ø

(0.76)

Stainless steel shroud

Straight printed board mount contacts are supplied in connector.

CODE

NUMBER L D Ø A

30.150

(3.81) 0.020

(0.51) 0.725

(18.42)

32 0.300

(7.62) 0.020

(0.51) 0.865

(21.97)

CODE

NUMBER L D Ø A

30.150

(3.81) 0.020

(0.51) 0.737

(18.72)

32 0.300

(7.62) 0.020

(0.51) 0.877

(22.28)

Fixed female jackscrews

Swaged spacer with

push-on fastener

phosphor bronze.

Material - Phosphor bronze.

Plating - Gold flash over nickel.

0.375

(9.53)

Typical Part Number: DD62F3S60T2X

For straight printed board mount contacts

specify code no. in step 4 of

ordering information.

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

90° PRINTED BOARD MOUNT CONNECTOR

CODE 4, 0.450 (11.43) CONTACT EXTENSION

Fixed female

jackscrews

0.078 (1.98) Typ. 0.020 (0.51) Ø 0.125 (3.18) Nominal

Numbering shown is rear view of

male and face view of female.

0.078 (1.98) Typ.

Specify code 4 in

step 4 of ordering

information.

± 0 . 0 0 8

Typical Part Number:

DD44F4R7NT2X

Typical Part Number:

DD78M4R7NT2X

Push-on fastener

beryllium copper

0.082 (2.08) Typ.

0.094 (2.39) Ø

0.060 (1.52) R.

0.120 (3.05) Ø

0.149

(3.78)

0.123

(3.12)

0.112

(2.84)

0.240

(6.10)

0.277

(7.04)

0.082 (2.08) Typ.

PLASTIC MOUNTING BRACKET AVAILABLE

Specify code B8 in step 5

of ordering information.

DD004R7000 0.450 (11.43) CONTACT EXTENSION

PART NUMBER A B C D

DD1504R7000 1.204

(30.58) 0.984

(24.99) 0.528

(13.41) 0.450

(11.43)

DD2604R7000 1.532

(38.91) 1.312

(33.32) 0.528

(13.41) 0.450

(11.43)

DD4404R7000 2.072

(52.63) 1.852

(47.04) 0.528

(13.41) 0.450

(11.43)

DD6204R7000 2.720

(69.09) 2.500

(63.50) 0.528

(13.41) 0.450

(11.43)

DD7804R7000 2.626

(66.70) 2.406

(61.11) 0.573

(14.55) 0.450

(11.43)

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

Typical Part Number: DD104M4R7NT20

Fixed female jackscrews

Specify code

4 in step 4 of

ordering

information.

Numbering

shown is rear

view of male

and face view

of female.

Push-on fastener

beryllium copper

0.020 (0.51) Ø

0.125 (3.18)

Nominal

2.500 ± 0.008 (63.50)

0.375

(9.53)

Max.

2.720 (69.09)

0.082

(2.08)

Typ,

0.450

(11.43)

0.614

(15.60)

90° PRINTED BOARD MOUNT CONNECTOR, SIZE 104

CODE 4, 0.450 (11.43) CONTACT EXTENSION

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

90° AND STRAIGHT PRINTED BOARD

CONTACT HOLE PATTERN

Mount connector with mating face positioned to follow direction of arrows.

0.984 (24.99)

1.312 (33.32)

1.852 (47.04)

2.500 (63.50)

1.250 (31.75)

1.203 (30.56)

1.250 (31.75)

2.406 (61.11)

2.500 (63.50)

0.190 (4.83)

0.215 (5.46)

0.380 (9.65)

0.385 (9.78)

0.650 (16.51)

0.655 (16.64) 0.041 (1.04)

0.041 (1.04)

0.926 (23.52)

0.090 (2.29) Typ.

0.095 (2.41) Typ. 0.082 (2.08) Typ.

0.082 (2.08) Typ. 0.095 (2.41) Typ.

0.095 (2.41) Typ.

0.095 (2.41)

Typ.

0.095 (2.41) Typ.

0.492

(12.50)

0.492

(12.50)

0.656

(16.66)

0.656

(16.66)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.082

(2.08)

0.082

(2.08)

0.082

(2.08)

0.082

(2.08)

0.082

(2.08)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.078

(1.98)

0.082

(2.08)

0.903

(22.94)

0.903

(22.94)

0.975

(24.77)

0.973

(24.71)

0.967

(24.56)

0.967

(24.56)

0.078

(1.98)

DD104 MALE

DD44 FEMALE

DD44 MALE

DD26 FEMALE

DD26 MALE

DD15 FEMALE

DD15 MALE DD62 MALE

DD62 FEMALE

DD78 MALE

DD78 FEMALE

DD104 FEMALE

Suggest 0.035 (0.89) Ø hole for contact termination positions.

Suggest 0.123 ±0.003 (3.12) Ø hole for mounting connector with push-on fasteners.

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

CRIMPING INFORMATION FOR DD AND ODD SERIES CRIMP CONTACTS

USE INDICATED POSITRONIC TOOLS FOR BEST RESULTS

Step 1: Strip wire to indicated length.

Step 2: Crimp wire to contact. For Hand Crimp Tool: - Place contact into crimping tool.

- Insert wire into contact.

-Center contact by slowly closing the

crimping tool until the crimp indenters

make contact with the crimp barrel.

-Complete the cycle of the crimping tool in

one smooth motion.

- Remove the crimped contact.

Take Care Not To: - Damage or remove strands.

- Untwist or overtwist strands.

- Leave insulation particles on strands.

- Damage insulation.

For Automatic Feed Pneumatic Crimp Tool: - Insert the wire into the contact, positioned in the

crimp tool by the plastic carrier.

-Depress the activating device of the crimping

tool to start the crimping cycle.

- Remove the crimped contact.

0.150

(3.81)

Insulation

Stranded wire

Strands damaged

or removed by

stripping tool.

Insulation cut

incorrectly.

Strands overtwisted.

Particles of

insulation on the

stripped part of

the wire.

Wire insulation

damaged.

Strands untwisted.

Examples of Stripping Faults

Correctly Stripped Wire

±0.010

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

CRIMPING INFORMATION FOR DD AND ODD CRIMP CONTACTS

Conductor tensile strength values are derived

using silver tin-plated copper wires.

Values may change depending upon what type of

wire is used.

Wire Insulation, Typical

Crimp to meet recommended

tensile strength.

Stripped wires compressed

for improved conduction. 8 Crimp

indents

Crimp indents too close

to inspection hole.

Strands not visible

through inspection hole.

Strands visible beyond

insulation support.

Stripped part of

the wire too long. Stripped part of

the wire too short. Crimp indents

incorrectly located.

Step 3: Inspect the crimp. For All Tools: - Strands to be visible through the inspection hole.

-Strands not to be visible beyond the insulation support.

-Crimped contact to meet recommended conductor tensile

force shown in chart.

-Check for peeled gold and bent contacts.

Correctly Crimped Contact

Cross Section

of Correctly Crimped Contact

Examples of Crimping Faults

Positronic Recommended

Conductor TensileStrength

Positronic recommended tools for DD series contacts.

For more information see contact crimp tools and accessories page.

CRIMP TOOLS POSITIONERS

FOR FC8022D POSITIONERS

FOR MC8022D

9507, HAND CRIMP TOOL 9502-3 9502-4

9550-1, AUTOMATIC FEED

PNEUMATIC

CRIMP TOOL Supplied in reels Supplied in reels

WIRE SIZE

AWG/(mm2)AXIALLOAD

POUNDS/(N)

(0.25) 8

(36)

(0.08) 3

(13)

(0.12) 5

(22)

(0.05) 1.5

(4.4)

(0.3) 12

(53)

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

*For additional information on accessories listed in

steps 5, 6 and 7, see Accessory Catalog.

**Ferrite inductor is available on contact type 32 only.

STEP

STEP 1 - Basic Series

DD Series

STEP 2 - DD Series Connector Variants

15, 26, 44, 62, 78, 104

STEP 3 - Connector Gender

M - Male

F - Female

STEP 4 - Type of Contacts

0 - Ordered Without Contacts.

1 - Crimp, 22 AWG–30 AWG (0.3mm2–0.05mm2).

2 - Solder cup, 22 AWG-30 AWG (0.3mm2–0.05mm2).

3 - S o l d e r, Straight Printed Board Mount with 0.150 (3.81) Tail Length.

3 2 -S o l d e r, Straight Printed Board Mount with 0.300 (7.62) Tail Length.

4 - S o l d e r, 90° Printed Board Mount with 0.450 (11.43) Contact

E x t e n s i o n .

*STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab, connector front panel mounted.

V5 - Lock Tab, connector rear panel mounted.

VL - Lock Lever, used with Hoods only.

T - Fixed Female Jackscrews.

T2 - Fixed Female Jackscrews.

T6 - Fixed Male and Female Polarized Jackscrews.

E - R o t a t i n g Male Jackscrews.

E 2 - Rotating MaleScrew Locks.

E 6 - Rotating Male and Female Polarized Jackscrews.

*STEP 6 - Hoods and Push-On Fasteners

0 - None.

J - Hood, Top Opening, Plastic.

L - Hood, Side Opening, Plastic.

Y - Hood, Top Opening, Plastic with Rotating Male

Jackscrews. Available in size 78 and 104 only.

Y6 - Hood, Top Opening, Plastic with Rotating Male

and Female Polarized Jackscrews. Available in

size 78 and 104 only.

Z - Hood, Top or Side Opening, Robust and

Extended Height, Composite and Plastic with

Rotating Male Jackscrews. Available in size 26,

44, 62, and 78 only.

H - Hood, Top Opening,Metal. Available in size 26,

44, 62, and 78 only.

G - Hood,EMI/RFI, Metal. Available in size 15, 26,

44, 62, and 78 only.

W - Hood, Top or Side Opening, Plastic. Available

in size 15, 26, and 44 only.

N - Push-on Fastener, for 90° Mounting Brackets.

**F - Ferrite Inductor

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

S - Stainless Steel.

X - Tin Plated.

Z - Tin Plated and Dimpled.

C - Cadmium with Dichromate Seal.

*STEP 5 - Mounting Style

0 - Mounting Hole, 0.120 (3.05) Ø.

B3 - Bracket, Mounting, 90° Metal with Cross Bar.

B8 - Bracket, Mounting, 90° Plastic with Cross Bar.

F - Float Mounts, Universal.

P - Threaded Post, Brass, 0.375 (9.53) Length.

P2 - Threaded Post, Nylon, 0.375 (9.53) Length.

R2 - Bracket, Mounting, 90° Metal, Swaged to Connector with

4-40 Thread Fixed Female Jackscrews with Cross Bar.

R6 - Bracket, Mounting, 90° Metal, Swaged to Connector with

0.120 (3.05) Ø Mounting Hole with Cross Bar.

R7 - Bracket, Mounting, 90° Metal, Swaged to Connector with

4-40 Threads with Cross Bar.

R8 - Bracket, Mounting, 90° Metal, Swaged to Connector with

4-40 Locknut with Cross Bar.

S - Swaged Spacer, 4-40 Threads, 0.375 (9.53) Length.

S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length.

S5 - Swaged Locknut, 4-40 Threads.

S6 - Swaged Spacer with Push-on Fasteners, 4-40 Threads,

0.375 (9.53) Length.

S7 - Swaged Spacer with Push-on Fastener for use with

Ferrite Inductor, 4-40 Threads, 0.515 (13.08) Length.

S T E P 9 - Special Options

Consult Sales Department.

1 2 3 4 5 6

DD 62 F 4 R7 N T6

MILITARY QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTAL APPLICATIONS

Series

AUTOMATIC FEED

CRIMP TOOL,

PNEUMATICALLY ACTUATED

Part No. 9550-1

MINIATURE STEP ADJUSTABLE TOOL

(M22520/2-01)

Part No. 9507

INSERTION/REMOVAL TOOL

(M81969/1-04)

This fast cycling automatic feed crimp tool produces an 8

indent crimp on wire sizes 20 AWG (0.5mm2) through 32

AWG (0.03mm2). DD Series contacts must be ordered on

reels.

To order, specify part number 9550-1. Foot control valve is

supplied as a standard accessory.

This miniature step adjustable hand crimping tool produces

an 8 indent crimp configuration and will crimp wire sizes 20

AWG (0.5mm2) through 32 AWG (0.03mm2).

To crimp female contacts, order contact positioner 9502-3.

To crimp male contacts, order contact positioner 9502-4.

Each positioner is equipped with a data plate which gives the

correct crimp-depth setting for each wire size, and must be

used with 9507 tool frame for best results when crimping

Densi-D Series contacts.

One end of this tool is used to insert contacts into Densi-D

Series connectors. The other end is used to extract contacts.

This is accomplished by sliding the extraction tip down the

wire into the connector until it bottoms against the contact. A

slight rotation while pushing will release the contacts, which

are then extracted by simultaneously pulling on the wire.

Size 22 Contacts,

Removable Crimp and

Fixed Press-Fit and

Solder Printed Board Mount

Professional Quality

U.L. Recognized

File #E49351

CSA Recognized

File #LR54219

Telecommunication

U.L. File #14098

ODD Series connectors are low cost, professional quality,

high density rectangular connectors recommended for use in

sheltered, non-corrosive indoor environments having normal

ventilation.

ODD Series connectors utilize precision machined, remov-

able contacts having closed barrel crimp terminations and sol-

der cup wire terminations. For printed board mount application,

press-fit and straight solder printed board mount and 90°

angled solder terminations are available.

Female removable contacts feature a rugged “Robi-D Open

Entry” design. Female, fixed contacts for board mounted appli-

cations feature both rugged Robi-D design and standard open

entry design, available to customer requirements.

Six standard contact variants are offered in arrangements of

15, 26, 44, 62, 78, and 104 contacts. ODD Series connectors

are mateable and compatible with other high density D-sub-

miniature connectors conforming to MIL-DTL-24308, and are

U.L. and CSA recognized.

ODD Series connectors are widely used in computer and

industrial control applications.

ODD SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulators: Glass filled polyester per MIL-M-24519,

U L9 4 V-0, black color.

Contacts: Male contacts – precision machined

brass alloy or phosphor bronze.

Female contacts – precision machined

high tensile phosphor bronze.

Contact Plating: Professional quality – gold flash over nick-

el plate. Other finishes available upon

r e q u e s t .

Shells: Steel or brass with tin plate, zinc plate

with dichromate seal.

Mounting Spacers: Nylon, plastic and brass, zinc plate with

dichromate seal.

Vibration Lock Systems: Slide lock and lock tabs, steel with nick-

el plate.

Push-On Fasteners: Phosphor bronze or beryllium copper with tin

p l a t e.

Jackscrew Systems: Steel with zinc plate and dichromate

seal, or clear zinc plate.

Hoods: Thermoplastic UL 94V-0. Composite,

brass or steel with zinc plate and

dichromate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 5 amperes nominal.

Initial Contact Resistance: 0.010 ohms maximum.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.042 inch (1.06mm).

Working Voltage: 300 V r.m.s.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady State: 10 days.

MECHANICAL CHARACTERISTICS:

Removable Contacts: Insert contact to rear face of insulator

and release from rear face of insulator.

Size 22 contact, male – 0.030 inch

(0.76mm) diameter; female removable

contacts feature a rugged “Robi-D Open

Entry” design.

Fixed Contacts, Board

Mounted A p p l i c a t i o n s : Female contact – both rugged Robi-D

design and standard open entry design

available to customer requirements.

Contact Retention

In Insulator: 9 lbs. (40 N).

Contact Terminations: Closed barrel crimp, wire sizes 22 AWG

(0.3mm2) through 30 AWG (0.05mm2).

Solder cup wire, 0.035 inch (0.89mm)

hole diameter for 22 AWG (0.3mm2) wire

maximum.

0.020 inch (0.5mm) or 0.030 inch

(0.76mm) diameter straight and 90°

printed board mount contact termina-

tions.

Solid Press-Fit – 0.034 inch (0.86mm)

across points with 0.020 inch (0.51mm)

lead. Solid metal construction.

Compliant Press-Fit – 0.047 inch

(1.19mm) diameter with 0.022 inch

(0.56mm) lead-in diameter.

Shells: Male shells may be dimpled for EMI/ESD

ground paths.

Polarization: Trapezoidally shaped shells and polar-

ized jackscrews.

Mounting To

Angle Brackets: Jackscrews and riveted fasteners with

0.120 inch (3.05mm) clearance hole,

and threaded riveted fasteners with 4-

40 threads and nylon lock inserts.

Mounting To

Printed Board: Rapid installation push-on fasteners

and mounting posts.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 500 operations minimum per IEC 512-5.

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

ODD 15 ODD 26 ODD 44

ODD 104ODD 78

ODD 62

STANDARD SHELLASSEMBLY

D1 D

0.036 (0.91) ±0.008

0.375

(9.53)

Max.

0.050 (1.27) ±0.010

0.120 (3.05) ±0.005 Ø Mounting hole,

two places

10° Typ.

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available 0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

OPTIONALSHELLASSEMBLYOPTIONALSHELLASSEMBLYWITH UNIVERSALFLOAT MOUNTS

0.032 (0.81)

Total diametral float

0.120 (3.05) ±0.010

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

ODD 15 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

ODD 15 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ODD 26 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

ODD 26 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ODD 44 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

ODD44 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ODD 62 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

ODD62 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ODD78 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

ODD78 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

ODD104 M 2.729

(69.32) 2.212

(56.18) 2.500

(63.50) 0.503

(12.78) 0.668

(16.97) 2.302

(58.47) 0.596

(15.14) 0.230

(5.84) 0.426

(10.82)

ODD104 F 2.729

(69.32) 2.189

(55.60) 2.500

(63.50) 0.485

(12.32) 0.668

(16.97) 2.302

(58.47) 0.596

(15.14) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE.

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

CRIMP CONTACTS

CLOSED CRIMP BARREL

±0.003

C Ø ±0.003

C Ø

±0.003

B Ø

±0.003

B Ø

±0.010

0.150 ±0.010

0.150

±0.001

0.030 Ø

(0.76)

±0.010

A±0.010

(3.81) (3.81)

Crimp contacts may be supplied kitted with connector or ordered separately.

Solder contacts may be supplied kitted with connector or ordered separately.

For straight printed

board mount contacts

specify code no. in step

4 of ordering information

MALE CONTACT

FEMALE CONTACT

PART

NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

FC8122D 22 / 24 / 26 / 28 / 30

(0.3/0.25/0.12/0.08/0.05) 0.529

(13.44) 0.035

(0.89) 0.047

(1.19)

PART

NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

MC8122D 22 / 24 / 26 / 28 / 30

(0.3/0.25/0.12/0.08/0.05) 0.531

(13.49) 0.035

(0.89) 0.047

(1.19)

Material - Phosphor bronze

Plating - Gold flash over nickel

Material - Phosphor bronze

Plating - Gold flash over nickel Material - Brass

Plating - Gold flash over nickel

Material - Brass

Plating - Gold flash over nickel

SOLDER CUP CONTACTS

Press-Fit CONNECTOR

STRAIGHT PRINTED BOARD MOUNT CONNECTOR

±0.010

0.529 (13.44) ±0.001

0.030 (0.76) Ø

±0.010

0.531 (13.49)

±0.010

0.150

(3.81)

±0.010

0.150

(3.81)

±0.003

0.047

(1.19) Ø

±0.003

0.035

(0.89) Ø

±0.003

0.047

(1.19) Ø

±0.003

0.035 (0.89) Ø Part Number: MS8122DPart Number: FS8122D

Typical Part Number: ODD44F9S0V3XTypical Part Number: ODD44F98S0T20

Typical Part Number: ODD62F3S60T6X

Swaged spacer with

4-40 threads

Swaged spacer with

4-40 threads

0.010

(0.25)

Min.

0.010

(0.25)

Min.

0.218

(5.54)

0.177

(4.50)

0.225

(5.72)

0.225

(5.72) 0.034 (0.86)

Across points

0.047 (1.18) Ø 0.020 (0.51) Ø

Lead in

0.022 (0.56) Ø

Lead in

V3 lock tabs

Fixed female jackscrews

Fixed female

jackscrew

Swaged spacer with

push-on fastener

phosphor bronze Fixed male

jackscrew

0.020 (0.51) Ø

0.225

(5.72)

LDIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Code

No.

0.300

(7.62)

30.150

(3.81) 0.010 (0.25) Min. ±0.010

For “Omega” Press-Fit contacts, specify

code 98 in step 4 ordering information. For solid press-fit contacts, specify

code 9 in step 4 ordering information.

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Fixed female

jackscrews

Push-on fastener,

beryllium copper.

Specify code 5 in step 4

of ordering information

Specify code 4 in step 4

of ordering information Numbering shown is rear view of

male and face view of female.

Numbering shown is rear view of

male and face view of female.

0.220 (5.59) Max.

Fixed female

jackscrews

Push-on fastener,

beryllium copper.

0.220 (5.59) Max.

0.125 (3.18)

0.078 (1.98) Typ.

0.100 (2.54) Typ. 0.030 (0.76) Ø

0.100 (2.54) Typ.

0.125 (3.18)

0.100 (2.54)

0.078 (1.98) Typ. 0.020 (0.51) Ø

±0.008

Typical Part Number:

ODD44F5R7NT2X

Typical Part Number:

ODD44F4R7NT2X

Typical Part Number:

ODD78M4R7NT20

Typical Part Number:

ODD78M5R7NT20

0.082 (2.08) Typ.

ODD005R7000 0.450 (11.43) CONTACT EXTENSION

PART NUMBER A B C D

ODD1505R7000 1.204

(30.58) 0.984

(24.99) 0.528

(13.41) 0.450

(11.43)

ODD2605R7000 1.532

(38.91) 1.312

(33.32) 0.528

(13.41) 0.450

(11.43)

ODD4405R7000 2.072

(52.63) 1.852

(47.04) 0.528

(13.41) 0.450

(11.43)

ODD6205R7000 2.720

(69.09) 2.500

(63.50) 0.528

(13.41) 0.450

(11.43)

ODD7805R7000 2.626

(66.70) 2.406

(61.11) 0.573

(14.55) 0.450

(11.43)

90° PRINTED BOARD MOUNT CONNECTOR

CODE 5, 0.450 (11.50) CONTACT EXTENSION

RUGGED “Robi-D Open Entry” FEMALE CONTACT

90° PRINTED BOARD MOUNT CONNECTOR

CODE 4, 0.314 (7.98) CONTACT EXTENSION

SLOTTED OPEN ENTRY FEMALE CONTACT

ODD004R7000 0.314 (7.98) CONTACT EXTENSION

PART NUMBER A B C D

ODD1504R7000 1.204

(30.58) 0.984

(24.99) 0.414

(10.52) 0.314

(7.98)

ODD2604R7000 1.532

(38.91) 1.312

(33.32) 0.414

(10.52) 0.314

(7.98)

ODD4404R7000 2.072

(52.63) 1.852

(47.04) 0.414

(10.52) 0.314

(7.98)

ODD6204R7000 2.720

(69.09) 2.500

(63.50) 0.414

(10.52) 0.314

(7.98)

ODD7804R7000 2.626

(66.70) 2.406

(61.11) 0.414

(10.52) 0.314

(7.98)

See next page for size 104

Right Angle Connectors.

See next page for size 104

Right Angle Connectors.

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

Fixed female jackscrews

0.220 (5.59) Max.

0.020 (0.51) Ø

0.082 (2.08) Typ. 0.125

(3.18)

Numbering shown is

rear view of male and

face view of female

Push-on fastener,

beryllium copper.

Specify code 5 in step 4

of ordering information

For fixed solder cup contacts, specify

code 21 in step 4 of ordering information.

2.720

(69.09)

0.450

(11.43)

0.614

(15.60)

0.220 Max.

(5.59)

22 AWG max.

(0.3mm2)

0.082 (2.08)

0.145 (3.68)

±0.008 2.500 (63.50)

2.720

(69.09)

±0.008 2.500 (63.50)

Typical Part Number: ODD26F2100T6X

Typical Part Number: ODD26F2100T2X

90° PRINTED BOARD MOUNT CONNECTOR

CODE 5, 0.450 (11.43) CONTACT EXTENSION

RUGGED “Robi-D Open Entry” FEMALE CONTACT

CONTACT VARIANT 104

FIXED CONTACT SOLDER CUP CONNECTOR

90° PRINTED BOARD MOUNT CONNECTOR

CODE 4, 0.314 (7.98) CONTACT EXTENSION

SLOTTED OPEN ENTRY FEMALE CONTACT

CONTACT VARIANT 104

Fixed female jackscrews

Fixed female jackscrews Fixed female

jackscrew Fixed male

jackscrew

0.220 (5.59) Max.

0.030 (0.76) Ø

0.100 (2.54) Typ. 0.125

(3.18)

Numbering shown is

rear view of male and

face view of female

Push-on fastener,

beryllium copper.

Specify code 4 in step 4

of ordering information 0.314

(7.98)

Typical Part Number:

ODD104F4R7NT2X

Typical Part Number:

ODD104F5R7NT2X

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Fixed male and female polarized jackscrews available.

Specify code T6 in step 7 of ordering information.

0.514 (13.06)

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

90° AND STRAIGHT PRINTED BOARD

CONTACT HOLE PATTERN

Mount connector with mating face positioned to follow direction of arrows.

0.984 (24.99)

2.500 (63.50)

2.406 (61.11)

2.500 (63.50)

1.250 (31.75)

1.203 (30.56)

0.973 (24.71)

0.975

(24.77)

0.903

(22.94)

0.903

(22.94)

0.967

(24.56)

0.981

(24.92)

1.250

(31.75)

1.250

(31.75)

0.095 (2.41) Typ.

0.984 (24.99)

1.312 (33.32)

1.852 (47.04)

0.190 (4.83)

0.215 (5.46)

0.380 (9.65)

0.385 (9.78)

0.650 (16.51)

0.655 (16.64)

0.926 (23.52)

0.090 (2.29) Typ.

B Typ.

0.492

(12.50)

0.492

(12.50)

0.656

(16.66)

0.656

(16.66)

ODD44 FEMALE

ODD44 MALE

ODD26 FEMALE

ODD15 FEMALE

ODD15 MALE

ODD62 MALE

ODD62 FEMALE

ODD78 MALE

ODD78 FEMALE

ODD104 MALE

ODD104 FEMALE

ODD26 MALE

Suggest 0.123 ±0.003 (3.12) Ø hole for mounting connector with push-on fasteners.

Suggest 0.035 (0.89) Ø hole for contact termination positions.

For Code 9 Solid Press–Fit Contacts:

*Suggest 0.0355 ±0.0010 (0.90) Ø drill with 0.0006 (15µ) minimum tin or tin/lead over

0.0010 (25µ) minimum copper plate. Final hole is 0.0315 +0.0010 -0.0020 (0.80) Ø.

*For Code 98 “Omega” Compliant Press-Fit Contacts:

Suggest 0.0453±0.0010 (1.150) Ø hole with 0.0005 (0.013) minimum tin or

tin/lead over 0.001 (0.03) minimum copper plate. Final hole size is

0.0394+0.0035-0.0024 (1.000+0.090-0.060) Ø

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

CODE NUMBER A B C Ø

40.100

(2.54) 0.100

(2.54) 0.045

(1.14)

3, 32, 5 0.078

(1.98) 0.082

(2.08) 0.035

(0.89)

0.100

(2.54)

0.123

(3.12)

9, 98 0.123

(3.12)

0.078

(1.98) 0.082

(2.08) *

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

REELS FOR AUTOMATIC FEED

PNEUMATIC CRIMP TOOLS

Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts

for use with the automatic feed pneumatic crimp tools, catalog part number 9550-1. The

same type carrier is used for both male and female contacts.

All male and female crimp contacts can be ordered in reels by adding letter “R” after the

contact part number, such as MC8122DR for a male contact and FC8122DR for a female

contact. Enlarged section of plastic contact carrier.

1 2 3 4 5 6

ODD 62 F 5 R7 N T6

STEP

STEP 1 - Basic Series

ODD Series

STEP 2 - ODD Series Connector Variants

15, 26, 44, 62, 78, 104

STEP 3 - Connector Gender

M - Male

F - Female

STEP 4 - Type of Contacts

0 - Ordered Without Contacts.

1 - Crimp, 22 AWG–30 AWG (0.3mm2–0.05mm2).

2 - Solder cup, 22 AWG–30 AWG (0.3mm2–0.05mm2),

Removable contacts.

21 - Solder cup, 22 AWG–30 AWG (0.3mm2–0.05mm2), Fixed con-

tacts.

3 - S o l d e r, Straight Printed Board Mount with 0.150 (3.81) Tail Length.

3 2 -S o l d e r, Straight Printed Board Mount with 0.300 (7.62) Tail Length.

4 - S o l d e r, 90° Printed Board Mount with 0.314 (7.98) Contact Extension.

5 - S o l d e r, 90° Printed Board Mount with 0.450 (11.43) Contact

E x t e n s i o n .

9 - Press-Fit, Solid.

9 8 - Press-Fit, Compliant.

*STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab, connector front panel mounted.

V5 - Lock Tab, connector rear panel mounted.

VL - Lock Lever, used with Hoods Only.

T - Fixed Female Jackscrews.

T2 - Fixed Female Jackscrews.

T6 - Fixed Male and Female Polarized Jackscrews.

E - R o t a t i n g Male Jackscrews.

E 2 - Rotating MaleScrew Locks.

E 6 - Rotating Male and Female Polarized Jackscrews.

*STEP 6 - Hoods and Push-On Fasteners

0 - None.

J - Hood, Top Opening, Plastic.

L - Hood, Side Opening, Plastic.

Y - Hood, Top Opening, Plastic with Rotating Male

Jackscrews. Available in size 78 and 104 only.

Y6 - Hood, Top Opening, Plastic with Rotating Male and

Female Polarized Jackscrews. Available in size 78 and

104 only.

Z - Hood, Top or Side Opening, Robust Extended Height,

Composite and Plastic with Rotating Male Jackscrews.

Available in size 15, 26, 44, 62 and 78 only.

H - Hood, Top Opening, Metal. Available in size 26, 44,

62, and 78 only.

G - Hood,EMI/RFI, Metal. Available in size 15, 26, 44, 62,

and 78 only.

W - Hood, Top or Side Opening, Plastic. Available in size

15, 26, and 44 only.

N - Push-on Fastener, for 90° Mounting.

**F - Ferrite Inductor.

**Q - Ferrite Inductor with Push-on Fastener, for 90°

Mounting Brackets.

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

S - Stainless Steel.

X - Tin Plated.

Z - Tin Plated and Dimpled.

*STEP 5 - Mounting Style

0 - Mounting Hole, 0.120 (3.05) Ø.

B3 - Bracket, Mounting, 90° Metal with Cross Bar.

B8 - Bracket, Mounting, 90° Plastic with Cross Bar.

F - Float Mounts, Universal.

P - Threaded Post, Brass, 0.225 (5.71) Length.

P2 - Threaded Post, Nylon, 0.225 (5.71) Length.

R2 - Bracket, Mounting, 90° Metal, Swaged to Connector with 4-40

Thread Fixed Female Jackscrews with Cross Bar.

R6 - Bracket, Mounting, 90° Metal, Swaged to Connector with 0.120

(3.05) Ø Mounting Hole with Cross Bar.

R7 - Bracket, Mounting, 90° Metal, Swaged to Connector with 4-40

Threads with Cross Bar.

R8 - Bracket, Mounting, 90° Metal, Swaged to Connector with 4-40

Locknut with Cross Bar.

S - Swaged Spacer, 4-40 Threads, 0.225 (5.71) Length.

S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length.

S5 - Swaged Locknut, 4-40 Threads.

S6 - Swaged Spacer with Push-on Fasteners, 4-40 Threads, 0.225

(5.71) Length.

S7 - Swaged Spacer with Push-on Fastener for use with Ferrite

Inductor, 4-40 Threads, 0.375 (9.53) Length.

S T E P 9 - Special Options

Consult Sales Department.

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

*For additional information on accessories listed in steps 5,

6 and 7, see Accessory Catalog.

**Ferrite inductor is available on contact types 32 and 5 only.

For ODD crimping information, see DD Series, p. 26 & 27.

PROFESSIONAL QUALITY, REMOVABLE CONTACT, HIGH DENSITY

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ODD

Series

AUTOMATIC FEED

CRIMP TOOL,

PNEUMATICALLY ACTUATED

Part No. 9550-1

MINIATURE STEP ADJUSTABLE TOOL

(M22520/2-01)

Part No. 9507

INSERTION/REMOVAL TOOL

(M81969/1-04)

This fast cycling automatic feed crimp tool produces an 8

indent crimp on wire sizes 20 AWG (0.5mm2) through 32

AWG (0.03mm2). ODD Series contacts must be ordered on

reels.

To order, specify part number 9550-1. Foot control valve is

supplied as a standard accessory.

This miniature step adjustable hand crimping tool produces

an 8 indent crimp configuration and will crimp wire sizes 20

AWG (0.5mm2) through 32 AWG (0.03mm2).

To crimp female contacts, order contact positioner 9502-3.

To crimp male contacts, order contact positioner 9502-4.

Each positioner is equipped with a data plate which gives the

correct crimp-depth setting for each wire size, and must be

used with 9507 tool frame for best results when crimping

ODD Series contacts.

One end of this tool is used to insert contacts into ODD

Series connectors. The other end is used to extract contacts.

This is accomplished by sliding the extraction tip down the

wire into the connector until it bottoms against the contact. A

slight rotation while pushing will release the contacts, which

are then extracted by simultaneously pulling on the wire.

CRIMP TOOLS POSITIONERS FOR

FC8122D POSITIONERS FOR

MC8122D

9507, HAND CRIMP TOOL 9502-3 9502-4

9550-1, AUTOMATIC FEED

PNEUMATIC

CRIMP TOOL Supplied in reels Supplied in reels

WIRE SIZE

AWG/(mm2)AXIALLOAD

POUNDS/(N)

(0.25) 8

(36)

(0.08) 3

(13)

(0.12) 5

(22)

(0.05) 1.5

(4.4)

(0.3) 12

(53)

Positronic recommended tools for ODD series contacts.

Positronic Recommended

Conductor Tensile Strength

Conductor tensile strength values are

derived using silver-tin plated copper wires.

Values may change depending upon what

type of wire is used.

PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ORD

Series

Size 20 Contacts,

Removable Crimp

Industrial Quality

Connectors

IEC Publication 807-3

Performance Level Two

ORD Series connectors are low cost, industrial/professional

quality D–Subminiature connectors with closed barrel crimp

removable contacts. ORD Series connectors are recommend-

ed for use in sheltered, mildly corrosive environments having a

wide range of temperatures with normal ventilation where high

performance is required.

ORD Series connectors utilize precision–machined contacts

to provide durability. Female contacts feature the low cost,

high performance Robi–D Open Entry design. ORD Series

connectors meet the performance requirements of IEC 807–3,

Performance Level Two. Closed entry female contacts are

available upon request.

Six (6) standard contact variants are offered in arrangements

of 9, 15, 25, 29, 37, and 50 contacts. ORD Series connectors

are mateable and compatible with all D–Subminiature connec-

tors conforming to MIL–DTL–24308, IEC 807–2, and IEC

807–3.

Awide assortment of cable support hoods and locking sys-

tems is available from stock.

ORD Series connectors also conform to EIARS 232 and RS

449, and CCITTX.24 interface connection requirements.

ORD SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulators: Glass filled DAP per A S T M – D – 5 9 4 8 ,

S D G – F, UL9 4 V-0, green color.

Contacts: Male contacts – precision machined

brass alloy.

Female contacts – precision machined

high tensile copper alloy with rugged

“Robi–D Open Entry” design.

Contact Plating: Industrial performance – gold flash over

nickel plate. Other finishes available upon

r e q u e s t .

Shells: Steel with tin plate; zinc plate with

dichromate seal, or stainless steel, pas-

sivated. Brass available upon request.

Mounting Spacers: Brass, zinc plate with dichromate seal,

or clear zinc plate.

Vibration Lock Systems: Slide lock and lock tabs, steel with nick-

el plate.

Jackscrew Systems: Steel with zinc plate and dichromate

seal, or clear zinc plate.

Hoods: Thermoplastic UL 94V-0. Composite,

brass or steel with zinc plate and

dichromate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 7.5 amperes nominal.

Initial Contact Resistance: 0.005 ohms maximum.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.039 inch (1.0mm).

Working Voltage: 300 V r.m.s.

CLIMACTIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady State: 10 days.

MECHANICAL CHARACTERISTICS:

Removable Contacts: Insert contact to rear face of insulator

and release from rear face of insulator.

Size 20 male contact – 0.040 inch

(1.02mm) diameter;

Size 20 female contacts – Rugged

“Robi-D Open Entry” design.

Contact Retention

In Insulator: 9 lbs. (40 N).

Contact Terminations: Closed barrel crimp, wire sizes 18 AWG

(1.0mm2) through 24 AWG (0.25mm2).

Shells: Tin–plated male shells may be dimpled for

EMI/ESD ground paths.

Polarization: Trapezoidally shaped shells and polar-

ized jackscrews.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 500 operations minimum per IEC 512-5

for “ ‘Robi–D’ Open Entry” design.

STANDARD SHELLASSEMBLY

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

0.050 (1.27) ±0.010

PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ORD

Series

D1 DH

0.036 (0.91) ±0.008

0.375

(9.53)

Max. 0.120 (3.05) ±0.005 Ø Mounting hole,

two places

10° Typ.

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available 0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

OPTIONALSHELLASSEMBLYOPTIONALSHELLASSEMBLYWITH UNIVERSALFLOAT MOUNTS

0.032 (0.81)

Total diametral float

0.120 (3.05) ±0.010

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

ORD 9 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

ORD 9 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ORD 15 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

ORD 15 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ORD 25 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

ORD25 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ORD 29 M 1.770

(44.96) 1.274

(32.36) 1.534

(38.96) 0.450

(11.43) 0.605

(15.37) 1.322

(33.58) 0.539

(13.69) 0.217

(5.51) 0.426

(10.82)

ORD29 F 1.770

(44.96) 1.251

(31.78) 1.534

(38.96) 0.431

(10.95) 0.605

(15.37) 1.322

(33.58) 0.539

(13.69) 0.237

(6.02) 0.429

(10.90)

ORD37 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

ORD37 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

ORD50 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

ORD50 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE.

ORD 9 ORD 15

ORD 29

ORD 25

ORD 37 ORD 50

PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ORD

Series

REELS FOR AUTOMATIC FEED PNEUMATIC CRIMP TOOLS

Contacts may be supplied in plastic carriers, packaged in reels holding 2,000 contacts for use with the automatic feed pneumat-

ic crimp tools, catalog part number 9550-1. The same type carrier is used for both male and female contacts.

All male and female crimp contacts can be ordered in reels by adding letter “R” after the contact part number, such as MC6020DR

for a male contact and FC6120DR for a female contact.

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

Enlarged section of plastic contact carriers

FEMALE CONTACT

RUGGED ‘ROBI–D’ OPEN ENTRY DESIGN

MALE CONTACT

FEMALE CONTACT

RUGGED ‘ROBI–D’ OPEN ENTRY DESIGN

MALE CONTACT

0.915

(23.24)

0.165

(4.19)

Ø 0.040 (1.02)

±0.015

±0.001

±0.015

±0.001

0.165

(4.19)

Ø C

Ø B Ø B Ø C

0.927

(23.55)

0.055 Ø

(1.40)

0.055 Ø

(1.40)

0.086 Ø

(2.18)

0.086 Ø

(2.18)

0.040 Ø

(1.02)

0.170

(4.32) 0.170

(4.55)

MC6018DFC6118D

Material – Phosphor bronze.

Plating – Gold flash over nickel.

Material – Brass.

Plating – Gold flash over nickel.

Material – Brass.

Plating – Gold flash over nickel.

Material – Phosphor bronze.

Plating – Gold flash over nickel.

PART NUMBER WIRE SIZE

AWG/(mm2)A

±0.015 B Ø

±0.005 C Ø

±0.005

FC6120D 20 / 22 / 24

(0.5/0.3/0.25) 0.538

(13.67) 0.044

(1.12) 0.066

(1.68)

MC6020D 20 / 22 / 24

(0.5/0.3/0.25) 0.538

(13.67) 0.044

(1.12) 0.066

(1.68)

CRIMP CONTACTS

CLOSED CRIMP BARREL

Closed entry contacts are

available. See page 43 of

the RD Series in this catalog

for additional information.

PROFESSIONAL QUALITY CRIMP, REMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

ORD

Series

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

STEP

STEP 1 - Basic Series

ORD Series

STEP 2 - ORD Series Connector Variants

9, 15, 25, 29, 37, 50

STEP 3 - Connector Gender

M - Male

F - Female

STEP 4 - Type of Contacts

0 - Ordered Without Contacts.

1 - Crimp, 20 AWG–24 AWG (0.5mm2–0.25mm2).

*STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab, connector front panel mounted.

V5 - Lock Tab, connector rear panel mounted.

VL - Lock Lever, used with Hoods Only.

T - Fixed Female Jackscrews.

T2 - Fixed Female Jackscrews.

T6 - Fixed Male and Female Polarized Jackscrews.

E - R o t a t i n g Male Jackscrews.

E 2 - Rotating MaleScrew Locks.

E 6 - Rotating Male and Female Polarized Jackscrews.

*STEP 6 - Hoods

0 - None.

J - Hood, Top Opening, Plastic.

L - Hood, Side Opening, Plastic.

Y - Hood, Top Opening, Plastic with Rotating Male

Jackscrews. Available in size 50 only.

Y6 - Hood, Top Opening, Plastic with Rotating Male and

Female Polarized Jackscrews. Available in size 50

only.

Z - Hood, Top or Side Opening, Robust Extended Height,

Composite and Plastic with Rotating Male Jackscrews.

Available in size 9, 15, 25, 37, and 50 only.

H - Hood, Top Opening,Metal. Available in size 15, 25,

37, and 50 only.

G - Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37,

and 50 only.

W - Hood, Top or Side Opening, Plastic. Available in size

9, 15, and 25 only.

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

S - Stainless Steel.

X - Tin Plated.

Z - Tin Plated and Dimpled.

C - Cadmium plated with Dichromate Seal.

*STEP 5 - Mounting Style

0 - Mounting Hole, 0.120 (3.05) Ø.

F - Float Mounts, Universal.

S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length.

S5 - Swaged Locknut, 4-40 Threads.

S T E P 9 - Special Options

Consult Sales Department.

*For additional information on accessories listed in steps 5, 6

and 7, see Accessory Catalog.

For ORD crimping information,

see SD Series, p. 16 and 17.

For ORD crimp tools,

see RD Series, p. 46.

123456

ORD 15 M 1 0 H 0

Size 20 Contacts,

Crimp Removable

Military/Industrial

Quality Connectors

IEC Publication 807-3

Performance Level One

MIL-DTL-24308 and MIL-C-39029

U.L. Recognized CSA Recognized

File #E49351 File #LR54219

Telecommunication

U.L. File #14098

Rhapso-D Series connectors are Military/Industrial quality

rectangular connectors designed for use in sheltered, mildly

corrosive environments having a wide range of temperature,

pressure and humidity changes. These crimp removable con-

tact connectors are qualified to MIL-DTL-24308 and MIL-C-

39029, and will meet the performance requirements of IEC

807-3, Performance Level One.

Rhapso-D Series connectors utilize precision machined con-

tacts with closed barrel, crimp terminations. The female con-

tact features a rugged closed entry design contact with stain-

less steel shroud. A“Robi-D Open Entry” female contact is

also available.

Six standard connector variants are offered in arrangements

of 9, 15, 25, 29, 37 and 50 contacts. Rhapso-D Series con-

nectors are mateable and compatible with all D-Subminiature

connectors conforming to MIL-DTL-24308, IEC 807-2 and IEC

807-3.

Awide assortment of cable support hoods and locking sys-

tems is available from stock.

Rhapso-D Series connectors conform to EIARS 232 and RS

449, and CCITT X.24 interface connection requirements.

RHAPSO-D SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulator: Glass filled D A P per A S T M - D - 5 9 4 8 ,

S D G - F, UL9 4 V-0, green color.

Contacts: Male contacts – precision machined

brass alloy. Female contacts – preci-

sion machined high tensile copper alloy

with stainless steel shroud or open

entry Robi-D design.

Contact Plating: Military performance – 0.000050 inch

(1.25 microns) gold over copper plate.

Industrial performance – gold flash over

nickel plate. Other finishes available upon

r e q u e s t .

Shells: Steel or brass with tin plate; zinc and

cadmium plate with dichromate seal,

stainless steel, passivated.

Mounting Spacers: Brass, zinc plate with dichromate seal.

Jackscrew Systems: Steel with zinc plate and dichromate

seal, or clear zinc plate.

Vibration Lock Systems: Slide lock and lock tabs, steel with nick-

el plate.

Hoods: Thermoplastic UL 94V-0. Composite,

brass or steel with zinc plate and

dichromate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 7.5 amperes nominal.

Initial Contact Resistance: 0.005 ohms maximum.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.039 inch (1.0mm).

Working Voltage: 300 V r.m.s.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady State: 21 days.

MECHANICAL CHARACTERISTICS:

Removable Contacts: Insert contact to rear face of insulator

and release from rear face of insulator.

Size 20 contact, male – 0.040 inch

(1.02mm) diameter; female – closed

entry design with stainless steel shroud

or open entry Robi-D design.

Contact Retention

In Insulator: 9 lbs. (40 N).

Contact Terminations: Closed barrel crimp, wire sizes 18 AWG

(1.0mm2) through 30 AWG (0.05mm2).

Shells: Male shells may be dimpled for EMI/ESD

ground paths.

Polarization: Trapezoidally shaped shells and polar-

ized jackscrews.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 1000 operations minimum per IEC 512-5

for closed entry female contact.

500 operations per IEC 512-5 for “Robi-D

Open Entry” design female contact.

MILITARY QUALITY, CRIMPREMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Rhapso-D

Series

MILITARY QUALITY, CRIMPREMOVABLE CONTACT,

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

STANDARD SHELL ASSEMBLY

G10° Typ.

0.036 (0.91) ±0.008 0.120 (3.05) ±0.005 Ø Mounting hole,

two places

0.050 (1.27) ±0.010

0.375

(9.53)

Max.

OPTIONALSHELLASSEMBLYOPTIONALSHELLASSEMBLYWITH UNIVERSALFLOAT MOUNTS

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available 0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

0.120 (3.05) ±0.010

0.032 (0.81)

Total diametral float

RD 9 RD 15 RD 25

RD 50RD 37RD 29

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

RD 9 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

RD 9 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

RD 15 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

RD 15 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

RD 25 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

RD25 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

RD 29 M 1.770

(44.96) 1.274

(32.36) 1.534

(38.96) 0.450

(11.43) 0.605

(15.37) 1.322

(33.58) 0.539

(13.69) 0.217

(5.51) 0.426

(10.82)

RD29 F 1.770

(44.96) 1.251

(31.78) 1.534

(38.96) 0.431

(10.95) 0.605

(15.37) 1.322

(33.58) 0.539

(13.69) 0.237

(6.02) 0.429

(10.90)

RD37 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

RD37 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

RD50 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

RD50 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE.

B Ø

C Ø

0.170

(4.32)

0.170

(4.32)

0.927

(23.55)

0.040 Ø

(1.02) 0.086 Ø

(2.18)

0.055 Ø

(1.40)

Material - Phosphor bronze.

Plating -Gold flash over nickel. Part Number: MC6018D

MILITARY QUALITY, CRIMPREMOVABLE CONTACT,

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

CRIMP CONTACTS

CLOSED CRIMP BARREL

MALE CONTACT

18 AWG (1.0mm2) max.

FEMALE CONTACT (“”Robi-D Open Entry”” DESIGN)

FEMALE CONTACT (“CLOSED ENTRY” DESIGN)

18 AWG (1.0mm2) max.

FEMALE CONTACT (“CLOSED ENTRY” DESIGN)

*Color Code *Color Code

B Ø B Ø

C Ø C Ø

0.170

(4.32) 0.170

(4.32)

Stainless Steel Shroud

0.040 Ø

(1.02)

Material - Leaded nickel copper.

Plating -Gold flash over nickel or 0.000050 inch

(1.25µ) gold over copper for military

specification contacts.

*Color Code -ORANGE/BLUE/GRAY for military

specification contacts.

Material - Brass.

Plating -Gold flash over nickel or 0.000050 inch

(1.25µ) gold over copper for military

specification contacts.

*Color Code -ORANGE/BLUE/WHITE for military

specification contacts.

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

FC6020D 20 / 22 / 24

(0.5/0.3/0.25) 0.538

(13.67) 0.044

(1.12) 0.066

(1.68)

FC6026D 26 / 28 / 30

(0.12/0.08/0.05) 0.538

(13.67) 0.027

(0.69) 0.066

(1.68)

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

MC6020D 20 / 22 / 24

(0.5/0.3/0.25) 0.550

(13.97) 0.044

(1.12) 0.066

(1.68)

MC6026D 26 / 28 / 30

(0.12/0.08/0.05) 0.550

(13.97) 0.027

(0.69) 0.066

(1.68)

*M39029/63-368 20 / 22 / 24

(0.5/0.3/0.25) 0.538

(13.67) 0.044

(1.12) 0.066

(1.68) *M39029/64-369 20 / 22 / 24

(0.5/0.3/0.25) 0.550

(13.97) 0.044

(1.12) 0.066

(1.68)

Crimp contacts may be supplied kitted with connector or ordered separately.

See page 46 for crimp tool information.

Material - Phosphor bronze.

Plating -Gold flash over nickel.

Material - Brass.

Plating -Gold flash over nickel.

PART NUMBER WIRE SIZE

AWG/(mm2)A B Ø C Ø

FC6120D 20 / 22 / 24

(0.5/0.3/0.25) 0.538

(13.67) 0.044

(1.12) 0.066

(1.68)

Part Number: FC6018D

0.915

(23.24)

Stainless steel shroud

0.170

(4.32)

0.086 Ø

(2.18)

0.055 Ø

(1.40)

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

REELS FOR AUTOMATIC FEED

PNEUMATIC CRIMP TOOLS

Enlarged section of plastic contact carriers

For RD crimping information,

see SD Series, p. 16 and 17.

Contacts may be supplied in plastic carriers, packaged in

reels holding 2,000 contacts for use with the automatic feed

pneumatic crimp tools, catalog part number 9550-1. The same

type carrier is used for both male and female contacts.

All male and female crimp contacts can be ordered in reels

by adding letter “R” after the contact part number, such as

MC6020DR for a male contact and FC6026DR for a female

contact.

MILITARY QUALITY, CRIMPREMOVABLE CONTACT ,

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

STEP

STEP 1 - Basic Series

RDSeries

STEP 2 - RD Series Connector Variants

9, 15, 25, 29, 37, 50

STEP 3 - Connector Gender

M - Male

F - Female

STEP 4 - Type of Contacts

0 - Ordered Without Contacts.

1 - Crimp, 20 AWG–24 AWG (0.5mm2–0.25mm2).

12 - Crimp, 26 AWG–30 AWG (0.12mm2–0.08mm2).

14 - Crimp, 20 AWG–24 AWG (0.5mm2–0.25mm2)

“Robi-D Open Entry” female contact.

*STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab, connector front panel mounted.

V5 - Lock Tab, connector rear panel mounted.

VL - Lock Lever, used with Hoods Only.

T - Fixed Female Jackscrews.

T2 - Fixed Female Jackscrews.

T6 - Fixed Male and Female Polarized Jackscrews.

E - R o t a t i n g Male Jackscrews.

E 2 - Rotating MaleScrew Locks.

E 6 - Rotating Male and Female Polarized Jackscrews.

*STEP 6 - Hoods

0 - None.

J - Hood, Top Opening, Plastic.

L - Hood, Side Opening, Plastic.

Y - Hood, Top Opening, Plastic with Rotating Male Jackscrews.

Available in size 50 only.

Y6 - Hood, Top Opening, Plastic with Rotating Male and Female

Polarized Jackscrews. Available in size 50 only.

Z - Hood, Top or Side Opening, Robust Extended Height,

Composite and Plastic with Rotating Male Jackscrews.

Available in size 9, 15, 25, 37, and 50 only.

H - Hood, Top Opening, Metal. Available in size 15, 25, 37, and

50 only.

G - Hood, EMI/RFI, Metal. Available in size 9, 15, 25, 37, and

size 50 only.

W - Hood, Top or Side Opening, Plastic. Available in size 9, 15,

and 25 only.

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

S - Stainless Steel.

X - Tin Plated.

Z - Tin Plated and Dimpled.

C - Cadmium plated with Dichromate Seal.

*STEP 5 - Mounting Style

0 - Mounting Hole, 0.120 (3.05) Ø.

F - FloatMounts, Universal.

S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length.

S5 - Swaged Locknut, 4-40 Threads.

S T E P 9 - Special Options

Consult Sales Department.

*For additional information on accessories listed in steps 5, 6

and 7, see Accessory Catalog.

For RD crimping information,

see SD Series, p. 16 and 17.

1 2 3 4 5 6

RD 15 M 12 0 H 0

MILITARY QUALITY, CRIMPREMOVABLE CONTACT,

SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Series

AUTOMATIC FEED

CRIMP TOOL,

PNEUMATICALLY ACTUATED

Part No. 9550-1

MINIATURE STEP ADJUSTABLE TOOL

(M22520/2-01)

Part No. 9507

INSERTION/REMOVAL TOOL

(M81969/1-02)

This fast cycling automatic feed crimp tool produces an 8

indent crimp on wire sizes 20 AWG (0.5mm2) through 32

AWG (0.03mm2). Rhapso-D Series contacts must be

ordered on reels.

To order, specify part number 9550-1. Foot control valve is

supplied as a standard accessory.

This miniature 8 step adjustable hand crimping tool produces

an 8 indent crimp configuration and will crimp wire sizes 18

AWG (1.0mm2) through 32 AWG (0.03mm2).

To crimp wire size 18 AWG (1.0mm2), order contact position-

er 9502-11. To crimp wire size 20 AWG (0.5mm2) through 30

AWG (0.05mm2), order contact positioner 9502-5. Each

positioner is equipped with a data plate which gives the cor-

rect crimp-depth setting for each wire size, and must be used

with 9507 tool frame for best results when crimping Rhapso-

D Series contacts.

One end of this tool is used to insert contacts into Rhapso-D

Series connectors. The other end is used to extract contacts.

This is accomplished by sliding the extraction tip down the

wire into the connector until it bottoms against the contact. A

slight rotation while pushing will release the contacts, which

are then extracted by simultaneously pulling on the wire.

Positronic Recommended

Conductor Tensile Strength

CRIMP TOOLS

POSITIONERS FOR

FC6020D, MC6020D,

FC6026D, MC6026D,

FC6120D

M39029/63-368

M39029/64-369

POSITIONERS FOR

FC6018D, MC6018D,

FC6118D

9507, HAND CRIMP TOOL 9502-5 9502-11

9550-1, AUTOMATIC FEED

PNEUMATIC

CRIMP TOOL Supplied in reels Not Available

WIRE SIZE

AWG/(mm2)AXIALLOAD

POUNDS/(N)

(0.5) 20

(89)

(0.25) 8

(36)

(0.3) 12

(53)

(0.12) 5

(22)

(1.0) 28

(125)

(0.08) 3

(13)

(0.05) 1.5

(6.7)

Conductor tensile strength values are derived using silver-tin

plated copper wires.

Values may change depending upon what type of wire is used.

Positronic recommended tools for RD series contacts.

For more information see contact crimp tools and accessories page.

Size 20 Contacts, Fixed

Military/Industrial

Quality Connectors

IEC Publication 807-2

Performance Level One

MIL-DTL-24308

U.L. Recognized CSA Recognized

File #E49351 File #LR54219

Telecommunication

U.L. File #14098

Harmo-D Series connectors are Military/Industrial quality

rectangular connectors designed for use in sheltered, mildly

corrosive environments having a wide range of temperature,

pressure and humidity changes. These fixed contact connec-

tors are qualified to MIL-DTL-24308 and meet the performance

requirements of IEC 807-2, Performance Level One.

Harmo-D Series connectors utilize precision machined con-

tacts which are fixed within the connector body.The female

contact features a rugged, closed entry design contact with a

stainless steel shroud.

Five standard connector variants are offered in arrange-

ments of 9, 15, 25, 37 and 50 contacts. Each connector vari-

ant is available with contact terminations for solder cup, wrap

post and straight and 90° printed board mount terminations

with Inch and Metric footprints. Harmo-D Series connectors

are mateable and compatible with all D-Subminiature connec-

tors conforming to IEC 807-2 and MIL-DTL-24308.

Awide assortment of printed board mounting hardware,

cable support hoods and locking systems is available from

stock.

Harmo-D Series connectors conform to EIA RS 232 and RS

449, and CCITT X.24 interface connection requirements.

HARMO-D SERIES TECHNICAL CHARACTERISTICS

MATERIALS AND FINISHES:

Insulator: Glass filled D A P per A S T M - D - 5 9 4 8 ,

S D G - F, UL9 4 V-0, green color.

Contacts: Male contacts – precision machined

brass alloy. Female contacts – preci-

sion machined high tensile phosphor

bronze with stainless steel shroud.

Contact Plating: Military performance – 0.000050 inch

(1.25 microns) gold over copper plate.

Industrial performance – gold flash over

nickel plate. Other finishes available upon

r e q u e s t .

Shells: Steel or brass with tin plate; zinc and

cadmium plate with dichromate seal,

stainless steel, passivated.

Mounting Spacers

and Brackets: Nylon plastic, or brass with tin plate;

zinc plate with dichromate seal.

Push-On Fasteners: Phosphor bronze or beryllium copper

with tin plate.

Jackscrew Systems: Steel with zinc plate and dichromate

seal, or clear zinc plate.

Vibration Lock Systems: Slide lock and lock tabs, steel with nick-

el plate.

Hoods: Thermoplastic UL 94V-0. Composite,

brass or steel with zinc plate and

dichromate seal.

ELECTRICAL CHARACTERISTICS:

Contact Current Rating: 7.5 amperes nominal.

Initial Contact Resistance: 0.005 ohms maximum.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.039 inch (1.0mm).

Working Voltage: 300 V r.m.s.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

Damp Heat, Steady State: 56 days.

MECHANICAL CHARACTERISTICS:

Fixed Contacts: Size 20 contact, male contact – 0.040

inch (1.02mm) diameter. Female con-

tact – closed entry design with stainless

steel shroud.

Contact Retention

In Insulator: 9 lbs. (40 N).

Resistance To Solder

Iron Heat: 650°F (350°C) for 10 seconds duration

per IEC 512-6.

Contact Te r m i n a t i o n s : Solder cup contacts – 0.042 inch

(1.06mm) minimum hole diameter in sol-

der style contact for 20 AWG (0.5mm2)

wire maximum.

Straight Printed Board Mount – 0.028

inch (0.71mm) diameter and 0.024 inch

(0.61mm) diameter.

90° Printed Board Mount – 0.028

(0.71mm) diameter for Inch System

footprint, and 0.024 (0.61mm) diameter

for European Metric footprint.

Wrap Post – 0.025 inch (0.64mm)

square.

Shells: Male shells may be dimpled for EMI/ESD

ground paths.

Polarization: Trapezoidally shaped shells and polar-

ized jackscrews.

Mounting To Angle

Brackets: Jackscrews and riveted fasteners with

0.120 inch (3.05mm) clearance hole,

and threaded riveted fasteners with 4-40

threads and nylon lock inserts.

Mounting To

Printed Board: Rapid installation push-on fasteners and

mounting posts.

Locking Systems: Jackscrews and vibration locking sys-

tems.

Mechanical Operations: 1000 operations minimum per IEC 512-5.

MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

Harmo-D

Series

MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

HDC

Series

CONTACT VARIANTS

FACE VIEW OF MALE OR REAR VIEW OF FEMALE

HDC 9 HDC 15 HDC 25

HDC 50

HDC 37

STANDARD SHELL ASSEMBLY

10° Typ.

0.036 (0.91) ±0.008 0.120 (3.05) ±0.005 Ø Mounting hole,

two places

0.050 (1.27) ±0.010

0.220 (5.59)

Max.

0.120 (3.05) ±0.010

0.032 (0.81)

Total diametral float

0.086 (2.18) +0.005 -0.000 Ø

Mounting hole, two places

0.120 (3.05) ±0.005 Ø Mounting hole, two places

0.154 (3.91) Ø Mounting hole available

OPTIONAL SHELLASSEMBLY WITH UNIVERSAL FLOAT MOUNTS

OPTIONAL SHELLASSEMBLY

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

HDC 9 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

HDC 9 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

HDC 15 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

HDC 15 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

HDC 25 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

HDC25 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

HDC37 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

HDC37 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

HDC50 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

HDC50 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

DIMENSIONS ARE IN INCHES (MILLIMETERS). ALLDIMENSIONS ARE SUBJECT TO CHANGE.

MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

HDC

Series

SOLDER CUP CONNECTOR

20 AWG Max.

(0.5mm2)

0.145

(3.68) 0.375

(9.53)

Fixed female jackscrews Fixed female

jackscrew Fixed male

jackscrew

For solder cup contacts,

specify code 2 in step 4

of ordering information.

For straight printed board

mount contacts, specify code no.

in step 4 of ordering information.

For wrap post contacts,

specify code 6 in step 4

of ordering information.

Fixed male and female polarized jackscrews available.

Specify code T6 in step 7 of ordering information.

Typical Part Number: HDC15M200T2Z Typical Part Number: HDC15M200T6Z

Typical Part Number: HDC25F3S60T0

Typical part number: HDC15F600T0

STRAIGHT PRINTED BOARD MOUNT CONNECTOR

CODE

NUMBER L

30.170

(4.32)

32 0.375

(9.53)

36 0.236

(6.00)

D Ø

0.028

(0.71)

0.028

(0.71)

0.024

(0.61)

Fixed female jackscrews

0.010 (0.25) Min. 0.225

(5.72)

D Ø

Swaged spacer with

push-on fastener

phosphor bronze.

WRAP POST CONNECTOR

0.025

(0.64) Sq.

0.495

(12.57)

0.720

(18.29)

Fixed female jackscrews

HDC25M6S50T0

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

HDC

Series

90° PRINTED BOARD MOUNT CONNECTOR

CODE 5, 0.283 (7.19) CONTACT EXTENSION

90° PRINTED BOARD MOUNT CONNECTOR

CODE 42, 0.370 (9.40) CONTACT EXTENSION

PART NUMBER A B C D

HDC905B3000 1.204

(30.58) 0.984

(24.99) 0.339

(8.61) 0.283

(7.19)

HDC1505B3000 1.532

(38.91) 1.312

(33.32) 0.339

(8.61) 0.283

(7.19)

HDC2505B3000 2.072

(52.63) 1.852

(47.04) 0.339

(8.61) 0.283

(7.19)

HDC3705B3000 2.720

(69.09) 2.500

(63.50) 0.339

(8.61) 0.283

(7.19)

HDC5005B3000 2.626

(66.70) 2.406

(61.11) 0.395

(10.03) 0.283

(7.19)

D D

Fixed female

jackscrews

Fixed female

jackscrews

Numbering shown is rear view

of male and face view of female.

Numbering shown is rear view

of male and face view of female.

Push-on fastener

beryllium copper

0.028 (0.71) Ø

0.024 (0.61) Ø

0.125 (3.18) Ø Typ.

0.160 (4.06) Nominal

0.197 (5.00) Nominal

Specify code 5

in step 4 of

ordering information.

Specify code 42

in step 4 of

ordering information.

±0.008

Typical Part Number:

HDC25M5R7NT2X Typical Part Number:

HDC50F5R7NTX

Typical Part Number:

HDC50M42B30T2X

Typical Part Number:

HDC25M42B30T2X

0.112

(2.84)

0.112

(2.84)

0.112

(2.84)

0.112

(2.84)

0.112

(2.84)

HDC005B3000 0.283 (7.19) CONTACT EXTENSION

0.100

(2.54)

0.100

(2.54)

0.100

(2.54)

0.100

(2.54)

0.100

(2.54)

PART NUMBER A B C D

HDC9042B3000 1.204

(30.58) 0.984

(24.99) 0.420

(10.67) 0.370

(9.40)

HDC0042B3000 0.370 (9.40) CONTACT EXTENSION

HDC15042B3000 1.532

(38.91) 1.312

(33.32) 0.420

(10.67) 0.370

(9.40)

HDC25042B3000 2.072

(52.63) 1.852

(47.04) 0.420

(10.67) 0.370

(9.40)

HDC37042B3000 2.720

(69.09) 2.500

(63.50) 0.420

(10.67) 0.370

(9.40)

HDC50042B3000 2.626

(66.70) 2.406

(61.11) 0.470

(11.94) 0.370

(9.40)

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

HDC

Series

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

90° AND STRAIGHT PRINTED BOARD

CONTACT HOLE PATTERN

Hole identification shown for male connector, use mirror image for female connector.

Mount connector with mating face positioned to follow direction of arrows.

Sym.

Sym. Sym.

Sym.

0.216 (5.49)

0.108 Typ.

(2.74) 0.109 Typ.

(2.77)

0.055 Typ.

(1.40)

0.055 Typ.

(1.40) 0.055 Typ.

(1.40)

0.109 Typ.

(2.77)

0.109 Typ.

(2.77)

0.108 Typ.

(2.74)

0.054 Typ.

(1.37)

0.054 Typ.

(1.37) 0.162

(4.11)

0.978

(24.84)

0.924

(23.47)

0.378

(9.60)

0.324

(8.23)

0.492

(12.50) 0.656

(16.66)

1.203

(30.56)

1.250

(31.75)

0.598

(15.19)

0.652

(16.56)

0.870

(22.10)

0.815

(20.70)

0.926

(23.52)

HDC 9

HDC 15

HDC 25

HDC 50HDC 37

Suggest 0.039 (0.99) Ø hole for 0.024 (0.61) Ø contact termination positions.

Suggest 0.045 (1.14) Ø hole for 0.028 (0.71) Ø contact termination positions.

Suggest 0.123 ±0.003 (3.12) Ø hole for mounting connector with push-on fasteners.

CODE

NUMBER X

30.112

(2.84)

50.112

(2.84)

32 0.112

(2.84)

0.224

(5.69)

0.224

(5.69)

0.224

(5.69)

36 0.112

(2.84) 0.224

(5.69)

*42 0.100

(2.54) 0.200

(5.08)

*Metric system, European contact hole pattern.

MILITARY QUALITY, FIXED CONTACT, SUBMINIATURE-D CONNECTORS

FOR MILITARY AND SEVERE INDUSTRIAL ENVIRONMENTALAPPLICATIONS

HDC

Series

STEP

STEP 1 - Basic Series

HDC Series

STEP 2 - HDC Series Connector Variants

9, 15, 25, 37, 50

STEP 3 - Connector Gender

M - Male

F - Female

STEP 4 - Type of Contacts

2 - Solder cup.

3 - Solder, Straight Printed Board Mount with 0.170 (4.32)

Tail Length.

32 - Solder, Straight Printed Board Mount with 0.375 (9.52)

Tail Length.

36 - Solder, Straight Printed Board Mount with 0.236 (5.99)

Tail Length.

42 - Solder, Metric System 90° Printed Board Mount with

0.370 (9.40) Contact Extension.

5 - Solder, 90° Printed Board Mount with 0.283 (7.19)

Contact Extension.

6 - Wrap Post.

*STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab, connector front panel mounted.

V5 - Lock Tab, connector rear panel mounted.

VL - Lock Lever, used with Hoods Only.

T - Fixed Female Jackscrews.

T2 - Fixed Female Jackscrews.

T6 - Fixed Male and Female Polarized Jackscrews.

E - R o t a t i n g Male Jackscrews.

E 2 - Rotating MaleScrew Locks.

E 6 - Rotating Male and Female Polarized Jackscrews.

*STEP 6 - Hoods and Push-On Fasteners

0 - None.

J - Hood, Top Opening, Plastic.

L - Hood, Side Opening, Plastic.

Y - Hood, Top Opening, Plastic with Rotating Male

Jackscrews. Available in size 50 only.

Y6 - Hood, Top Opening, Plastic with Rotating Male and

Female Polarized Jackscrews. Available in size 50

only.

Z - Hood, Top or Side Opening, Robust and Extended

Height, Composite and Plastic with Rotating Male

Jackscrews.

H - Hood, Top Opening, Metal. Available in size 15, 25, 37

and 50 only.

G - Hood, EMI/RFI, Metal.

W - Hood, Top or Side Opening, Plastic. Available is size

9, 15, and 25 only.

N - Push-on Fastener, for 90° Mounting Brackets.

**F - Ferrite Inductor.

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

S - Stainless Steel.

X - Tin Plated.

Z - Tin Plated and Dimpled.

C - Cadmium plated with Dichromate Seal

*STEP 5 - Mounting Style

0 - Mounting Hole, 0.120 (3.05) Ø.

B3 - Bracket, Mounting, 90° Metal with Cross Bar.

B8 - Bracket, Mounting, 90° Plastic with Cross Bar.

F - Float Mounts, Universal.

P - Threaded Post, Brass, 0.225 (5.71) Length.

P2 - Threaded Post, Nylon, 0.225 (5.71) Length.

R2 - Bracket, Mounting, 90° Metal, Swaged to Connector with 4-40

Thread Fixed Female Jackscrews with Cross Bar.

R6 - Bracket, Mounting, 90° Metal, Swaged to Connector with 0.120

(3.05) Ø Mounting Hole with Cross Bar.

R7 - Bracket, Mounting, 90° Metal, Swaged to Connector with 4-40

Threads with Cross Bar.

R8 - Bracket, Mounting, 90° Metal, Swaged to Connector with 4-40

Locknut with Cross Bar.

S - Swaged Spacer, 4-40 Threads, 0.225 (5.71) Length.

S2 - Swaged Spacer, 4-40 Threads, 0.125 (3.18) Length.

S5 - Swaged Locknut, 4-40 Threads.

S6 - Swaged Spacer with Push-on Fastener, 4-40 Threads, 0.225

(5.71) Length.

S7 - Swaged Spacer with Push-on Fastener for use with Ferrite

Inductor, 4-40 Threads, 0.375 (9.53) Length.

S T E P 9 - Special Options

Consult Sales Department.

*For additional information on accessories listed in steps 5, 6

and 7, see Accessory Catalog.

**Ferrite inductor is available on contact types 32, 36 and 6

only.

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

1 2 3 4 5 6

HDC 37 F 5 B3 0 T

Size 20 Contacts,

Fixed

Machined Contact,

“Bi-Spring” or “Omega”

Compliant Termination

Repairable Contact

Professional Quality

IEC 807-2 & IEC 352-5

MIL-STD 2166

U.L. Recognized Telecommunication

File #E49351 U.L. File #140980

MATERIALS AND FINISHES:

Insulator: Glass filled polyester per MIL-M-24519, U.L. 94V-

0, blue color.

Contacts: Male and female contacts are precision

machined–high tensile phosphor bronze.

Contact Plating: Professional performance - Gold flash over nickel

p l a t e. Other finishes available upon request.

Shells: Steel or brass with tin plate or zinc plate with

dichromate seal.

Mounting Spacers

and Brackets: Brass with tin plate; zinc plate with dichromate

seal.

Jackscrew System: Steel; zinc plate with dichromate seal.

Vibration Lock Systems: Lock tabs, nickel plated steel.

E L E C T R I C A LCHARACTERISTICS OF COMPLIANT CONNEC-

TION TO PLATED-THROUGH-HOLE OF PRINTED BOARD:

Initial Contact Resistance

of Connection: Less than 0.001 ohms per IEC 512-2, Test 2a.

Change in Contact

Resistance of Connection

after Mechanical, Electrical

or Climatic Conditioning: Less than 0.001 ohms increase per IEC 512-2,

Test 2a.

Gas-tight

Connections Test: Less than 0.001 ohms increase in contact resis-

tance after 1 hour per EIA 364, TP36, Method

One.

ELECTRICAL CHARACTERISTICS

OF CONNECTOR:

Contact Current Rating: 7.5 amperes, nominal.

Initial Contact Resistance: 0.008 ohms maximum per IEC512-2, Test 2a.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.039 inch (1.0mm).

Working Voltage: 300 V.

MECHANICAL CHARACTERISTICS:

Repairable Contacts

Solid Metal Construction: Size 20 contact male – 0.040 inch (1.02mm)

diameter: female contact – rugged open-entry

design or closed entry design.

Contact Retention

In Insulator: 5 lbs. (21 N) minimum.

Compliant Termination

Bi-Spring Construction: 0.053 inch (1.35mm) diameter with 0.034 inch

(0.86mm) lead-in diameter. Offered with three

termination lengths for 0.063 inch (1.60mm)

0.093 inch (2.36mm) 0.125 (3.18mm) thick print-

ed boards or back planes.

Press-In Force of Contact

into plated-through-hole

of 0.125 inch (3.18mm)

printed board: 2.5 lbs. (10.5 N).

Push-Out Force of Contact

from plated-through-hole

of 0.125 inch (3.18mm)

printed board: 2 lbs. (8.4 N).

Compliant Te r m i n a t i o n

Omega Construction: 0.047 inch (1.18mm) diameter with 0.022 inch

(0.56mm) lead-in diameter. Asingle termination length

accommodates any thickness printed board or back-

p l a n e .

Press-In Force of Contact

into plated-through-hole

of 0.125 inch (3.18mm)

printed board: 4 lbs. (16.8 N).

Push-Out Force of Contact

from plated-through-hole

of 0.125 inch (3.18mm)

printed board: 6 lbs. (25.2 N).

Vibration Test per

MIL-STD 1344, Method

2005, Test Conditioning: No electrical discontinuity of 1 µs or greater.

Connector Polarization: Trapezoidal shaped shells and polarized

jackscrews.

Locking System: Jackscrews and vibration locking systems.

Mechanical Operations: 500 operations per IEC 512-5.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCD

Series

PCD Series connectors are professional quality rectangular

connectors with compliant terminations.The low press-in force

required to install the contacts into the board eliminates print-

ed board pressure-warp and twisting stresses which can

result in expensive repair or replacement of printed boards

and back panels. Female connectors are available with

closed entry contacts for high reliability applications.

These connectors were designed to allow removal and

replacement of individual contacts damaged in manufacturing,

testing, or field use without removing the connector from the

board. The compliant section of the contact causes no dam-

age or deformation of the plated-through-hole during installa-

tion or removal from the printed board. With a minimum axial

push-out force of 5 lbs. (21 N), an individual contact may be

removed from both the printed board and connector insulator.

Avirgin contact may then be pushed into the connector insu-

lator and plated-through-hole, thereby accomplishing the

repair of the connector without the removal of the connector

from the printed board.

Bi-Spring Compliant Contacts have press-in and push-

out forces of 2 lbs (8.4 N) to 2.5 lbs (10.5 N). The requirement

for finished printed board hole diameter is 0.047 inches (1.19

mm). The compliant contact will permit up to three replace-

ment operations.

Omega Compliant Contacts have press-in and push-out

forces of 4 lbs (16.8 N) to 6 lbs (25.2 N). The requirement for

the finished printed board hole diameter is 0.0394 inches

(1.00mm). This contact style offers an economically priced

connector with a finished hole diameter common to many

press fit contacts.

Five standard connector variants are offered in arrange-

ment of 9, 15, 25, 37, and 50 contacts. PCD connectors are

mateable and compatible with all D-Subminiature connectors

conforming to IEC 807-2, IEC 807-3, and dimensional require-

ments of MIL-DTL-24308.

COMPLIANT PRESS-D CONNECTOR TECHNICAL CHARACTERISTICS

PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCD

Series

PCD CONTACT VARIANTS

FACE VIEW OF FEMALE CONNECTOR OR REAR VIEW OF MALE CONNECTOR

PCD 9 PCD 15 PCD 25

PCD 50PCD 37

STANDARD SHELLASSEMBLY

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

PCD 9 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

PCD 9 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCD 15 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

PCD 15 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCD 25 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

PCD25 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCD37 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

PCD37 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCD50 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

PCD50 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

“Bi-Spring” Compliant

Termination “Omega” Compliant

Termination

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

0.036 ±0.008

(0.91±0.20) 0.220 (5.59) Max.

10° Typ.

0.265 (6.73)

*The effective length of the compliant section may also be varied (longer or shorter) and can be selectively posi-

tioned and centered at several points along the contact termination length, permitting high or low profile mounting of

the connector on printed boards.

BI–SPRING COMPLIANT PRESS-FIT CONNECTOR

OMEGA COMPLIANT PRESS-FIT CONNECTOR

PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCD

Series

SWAGED MOUNTING POST

4-40 THREAD.

For “Bi–Spring” Press–Fit

contacts, specify code 9, 92

or 93 in step 4 of ordering

information.

Detail of Bi–Spring contacts

Max. thread length

in mounting post

Fixed female jackscrews

Screw, 4-40

customer supplied

0.053 (1.35) Ø

Contact termination 0.034 (0.86) Ø

Lead in

0.225 (5.72)

0.265 (6.73)

“A” Termination length

0.045

(1.14)

BOARD THICKNESS “A”

0.063 (1.60) 0.153 (3.89)

0.093 (2.36) 0.183 (4.65)

0.125 (3.18) 0.218 (5.54)

CONTACT TYPE

*CONTACTTERMINATION LENGTH

Typical Part Number: PCD25F9S0T20

SWAGED MOUNTING POST

4-40 THREAD.

For “Omega” Press–Fit contacts,

specify code 98 in step 4 of

ordering information.

Detail of Omega contacts

Max. thread length

in mounting spacer

Fixed female jackscrews

Screw, 4-40

customer supplied

0.022 (0.56) Ø

Lead in

0.225 (5.72)

0.265 (6.73)

0.047 (1.18)Ø

Contact

Termination

*0.167 (4.24)

Typical Part Number: PCD25F98S0T20

0.045

(1.14)

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

COMPLIANT PRESS-FIT CONNECTOR PRINTED BOARD

CONTACT HOLE PATTERN

PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCD

Series

1/2 inch shaft for

Arbor press.

Replaceable

Seating

Pins

Male Connector

Seating Tool

(Exploded view)

Female Connector

Seating Tool

(Exploded view)

Single Contact

Insertion Tool Single Contact

Removal Tool

Arbor Press

Single Contact

Removal

9512-102-0

FOR

ALL SIZES

Series Connector Seating Single Contact Insertion

PCD 9 9512-1-0-41 9512-6-0-41

9512-100-0

FOR

ALLSIZES

9512-101-0

FOR

ALL SIZES

PCD 15 9512-2-0-41 9512-7-0-41

PCD 25 9512-3-0-41 9512-8-0-41

PCD 37 9512-4-0-41 9512-9-0-41

PCD 50 9512-5-0-41 9512-10-0-41

Arbor press for connector seating tools-9530-1-0 1 ton capacity 4 inch throat

Replacement pins for connector seating tools. Female - 855-658-0-41

Male Female Male Female

PCD SERIES PRESS-FIT CONNECTORS INSTALLATION TOOLS

Positronic recommended tools for PCD Series Connectors and Contacts

Suggest 0.120 (3.05)Ø

hole for mounting connector

For Bi–Spring contact

terminations:

Suggest hole with

0.0001 (0.003) mini-

mum solder over

0.001 (0.03) minimum

copper plate. Final

hole size is Ø

0.047±0.002

(1.19±0.05).

For Omega contact

terminations: Suggest

Ø 0.0453±0.0010

(1.150±0.025) hole

with 0.0005 (0.013)

minimum tin or tin/lead

over 0.001 (0.03) mini-

mum copper plate.

Final hole size is Ø

0.0394+0.0035-0.0024

(1.000+0.090-0.060).

0.492 (12.50)

1.250

(31.75) 0.978

(24.84) 0.870

(22.10)

0.815

(20.70)

1.203

(30.56)

0.924

(23.47)

0.656

(16.66) 0.926

(23.52) 0.652

(16.56)

0.598

(15.19)

0.378

(9.60)

0.216 (5.49)

0.108 Typ.

(2.74)

0.109 Typ.

(2.77) 0.109 Typ.

(2.77)

0.055 Typ.

(1.40) 0.055 Typ.

(1.40)

0.108

(2.74) Typ.

0.054 Typ.

(1.37)

0.109 Typ.

(2.77)

0.055 Typ.

(1.40)0.054 Typ.

(1.37)

0.112

(2.84) 0.112

(2.84)

0.112

(2.84)

0.112

(2.84)

0.224

(5.69)

0.112

(2.84)

0.162

(4.11) 0.324

(8.23)

Sym.

Sym. Sym.

PCD 9 PCD 15 PCD 25

PCD 50

PCD 37

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

PROFESSIONAL QUALITY, STANDARD DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCD

Series

STEP

STEP 1 - Basic Series

PCD Series

STEP 2 - PCD Series Connector Variants

9, 15, 25, 37, 50

STEP 3 - Connector Gender

M - Male

F - Female

FC - Female, Closed Entry

STEP 4 - Type of Contacts – Compliant Press-Fit

9 - Bi-Spring type compliant, termination length 0.153 (3.89).

92 - Bi-Spring type compliant, termination length 0.183 (4.65).

93 - Bi-Spring type compliant, termination length 0.218 (5.54).

98 - Omega type compliant.

STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab.

T6 - Fixed Male and Female Polarized Jackscrews.

T2 - Fixed Female Jackscrews, 4-40 Thread.

Note: These options must be ordered with connector

and cannot be ordered separately.

STEP 6 - Hoods

0 - None

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

X - Tin Plated.

Z - Tin Plated and Dimpled.

STEP 5 - Mounting Style

S - Swaged Mounting Post 4-40 Threads

0.265 (6,73) Length.

S T E P 9 - Special Options

Consult Sales Department.

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

1 2 3 4 5 6

PCD 25 M 9 S 0 T2

CODE MALE OPEN ENTRY FEMALE CLOSED ENTRY FEMALE

94305-13-1-* 4306-14-1-* 4306-139-1-*

92 4305-13-2-* 4306-14-2-* 4306-139-2-*

93 4305-13-3-* 4306-14-3-* 4306-139-3-*

* - PLATING OPTIONS FOR REPLACEMENT CONTACTS

-14 GOLD 0.000030 (0.75 MICRONS) OVER NICKEL PLATE

-51 GOLD FLASH OVER NICKEL PLATE

REPLACEMENT CONTACTS

PART NUMBERS

98 4305-15-0-* 4306-17-0-* 4306-189-0-*

Size 22 Contacts

Fixed

Machined Contact,

“Omega”

Compliant Termination

Repairable Contact

Professional Quality

IEC 807-2 & IEC 352-5

MIL-STD 2166

U.L. Recognized Telecommunication

File #E49351 U.L. File #140980

MATERIALS AND FINISHES:

Insulator: Glass filled polyester per MIL-M-24519, U.L. 94V-

0, blue color.

Contacts: Male and female contacts are precision

machined–high tensile phosphor bronze.

Contact Plating: Professional performance - Gold flash over nickel

p l a t e. Other finishes available upon request.

Shells: Steel or brass with tin plate or zinc plate with

dichromate seal.

Mounting Spacers

and Brackets: Brass with tin plate; zinc plate with dichromate

seal.

Jackscrew System: Steel; zinc plate with dichromate seal.

Vibration Lock Systems: Lock tabs, nickel plated steel.

E L E C T R I C A L CHARACTERISTICS OF COMPLIANT CONNEC-

TION TO PLATED-THROUGH-HOLE OF PRINTED BOARD:

Initial ContactResistance

of Connection: Less than 0.001 ohms per IEC 512-2, Test 2a.

Change in Contact

Resistance of Connection

after Mechanical, Electrical

or Climatic Conditioning: Less than 0.001 ohms increase per IEC 512-2,

Test 2a.

Gas-tight

Connections Test: Less than 0.001 ohms increase in contact resis-

tance after 1 hour per EIA 364, TP36, Method

One.

ELECTRICAL CHARACTERISTICS

OF CONNECTOR:

Contact Current Rating: 5 amperes, nominal.

Initial Contact Resistance: 0.010 ohms maximum per IEC512-2, Test 2a.

Proof Voltage: 1000 V r.m.s.

Insulator Resistance: 5 G ohms.

Clearance and Creepage

Distance (minimum): 0.042 inch (1.02 mm).

Working Voltage: 300 V.

MECHANICAL CHARACTERISTICS:

Repairable Contacts

Solid Metal Construction: Size 22 contact male – 0.030 inch (0.76 mm)

diameter: female contact – rugged open-entry

design or closed entry design.

Contact Retention

In Insulator: 5 lbs. (21 N) minimum.

Compliant Te r m i n a t i o n

Omega Construction: 0.047 inch (1.18mm) diameter with 0.022 inch

(0.56mm) lead-in diameter. Asingle termination length

accommodates any thickness printed board or back-

plane.

Press-In Force of Contact

into plated-through-hole

of 0.125 inch (3.18mm)

printed board: 4 lbs. (16.8 N).

Push-Out Force of Contact

from plated-through-hole

of 0.125 inch (3.18mm)

printed board: 6 lbs. (25.2 N).

Vibration Test per

MIL-STD 1344, Method

2005, Test Conditioning: No electrical discontinuity of 1 µs or greater.

Connector Polarization: Trapezoidal shaped shells and polarized

jackscrews.

Locking System: Jackscrews and vibration locking systems.

Mechanical Operations: 500 operations per IEC 512-5.

CLIMATIC CHARACTERISTICS:

Temperature Range: -55°C to +125°C.

PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCDD

Series

PCDD Series connectors are professional quality rectangu-

lar connectors with compliant termination repairable contacts.

The low press-in force required to install the contacts into the

board eliminates printed board pressure-warp and twisting

stresses which can result in expensive repair or replacement of

printed boards and back panels. Female connectors are avail-

able with closed entry contacts for high reliability applications.

These connectors were designed to allow removal and

replacement of individual contacts damaged in manufacturing,

testing, or field use without removing the connector from the

board. The compliant section of the contact causes no dam-

age or deformation of the plated-through-hole during installa-

tion or removal from the printed board. With a minimum axial

push-out force of 5 lbs (21 N), an individual contact may be

removed from both the printed board and connector insulator

and plated-through-hole, thereby accomplishing the repair of

the connector without the removal of the connector from the

printed board.

Omega Compliant Contacts have press-in and push-out

forces of 4 lbs (16.8 N) to 6 lbs (25.2 N). The requirement for

the finished printed board hole diameter is 0.0394 inch (1.00

mm). This contact style offers an economically priced connec-

tor with a finished hole diameter common to many press fit con-

tacts.

Six standard connector variants are offered in arrangements

of 15, 26, 44, 62, 72, and 104 contacts. PCDD connectors are

mateable and compatible with all Subminiature-D connectors

conforming to dimensional requirements of MIL-DTL-24308.

COMPLIANT PRESS-D CONNECTOR TECHNICAL CHARACTERISTICS

PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCDD

Series

PCDD CONTACT VARIANTS

FACE VIEW OF MALE AND REAR VIEW OF FEMALE

PCDD 26

PCDD 15 PCDD 44

PCDD 104

PCDD 62

STANDARD SHELL ASSEMBLY

0.036 ±0.008

(0.91±0.20) 0.220 (5.59) Max.

10° Typ.

0.265 (6.73)

“Omega” Compliant

Termination

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

PCDD 78

CONNECTOR

VARIANT SIZES A

±0.015 B

±0.005 B1

±0.005 C

±0.005 D

±0.005 D1

±0.005 E

±0.015 G

±0.010 H

±0.010 K

±0.005 M

±0.010

PCDD 15 M 1.213

(30.81) 0.666

(16.92) 0.984

(24.99) 0.329

(8.36) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

PCDD 15 F 1.213

(30.81) 0.643

(16.33) 0.984

(24.99) 0.311

(7.90) 0.494

(12.55) 0.759

(19.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCDD 26 M 1.541

(39.14) 0.994

(25.25) 1.312

(33.32) 0.329

(8.36) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.233

(5.92) 0.422

(10.72)

PCDD 26 F 1.541

(39.14) 0.971

(24.66) 1.312

(33.32) 0.311

(7.90) 0.494

(12.55) 1.083

(27.51) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCDD 44 M 2.088

(53.04) 1.534

(38.96) 1.852

(47.04) 0.329

(8.36) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

PCDD44 F 2.088

(53.04) 1.511

(38.38) 1.852

(47.04) 0.311

(7.90) 0.494

(12.55) 1.625

(41.28) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCDD 62 M 2.729

(69.32) 2.182

(55.42) 2.500

(63.50) 0.329

(8.36) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.230

(5.84) 0.426

(10.82)

PCDD62 F 2.729

(69.32) 2.159

(54.84) 2.500

(63.50) 0.311

(7.90) 0.494

(12.55) 2.272

(57.71) 0.422

(10.72) 0.243

(6.17) 0.429

(10.90)

PCDD 78 M 2.635

(66.93) 2.079

(52.81) 2.406

(61.11) 0.441

(11.20) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.230

(5.84) 0.426

(10.82)

PCDD78 F 2.635

(66.93) 2.064

(52.43) 2.406

(61.11) 0.423

(10.74) 0.605

(15.37) 2.178

(55.32) 0.534

(13.56) 0.243

(6.17) 0.429

(10.90)

PCDD104 M 2.729

(69.32) 2.212

(56.18) 2.500

(63.50) 0.503

(12.78) 0.668

(16.97) 2.302

(58.47) 0.596

(15.14) 0.230

(5.84) 0.426

(10.82)

PCDD104 F 2.729

(69.32) 2.189

(55.60) 2.500

(63.50) 0.485

(12.32) 0.668

(16.97) 2.302

(58.47) 0.596

(15.14) 0.243

(6.17) 0.429

(10.90)

*The effective length of the compliant section may also be varied (longer or shorter) and can be selectively posi-

tioned and centered at several points along the contact termination length, permitting high or low profile mounting of

the connector on printed boards.

OMEGA COMPLIANT PRESS-FIT CONNECTOR

PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCDD

Series

SWAGED MOUNTING POST

4-40 THREAD.

For “Omega” Press–Fit contacts,

specify code 98 in step 4 of

ordering information.

Detail of Omega contacts

Max. thread length

in mounting spacer

Fixed female jackscrews

Screw, 4-40

customer supplied

0.022 (0.56) Ø

Lead in

0.225 (5.72)

0.265 (6.73)

Ø 0.047 (1.18)

Contact

Termination

*0.167 (4.24)

Typical Part Number: PCDD44F98S0T020

0.045

(1.14)

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

1/2 inch shaft for

Arbor press.

Replaceable

Seating

Pins

Male Connector

Seating Tool

(Exploded view)

Female Connector

Seating Tool

(Exploded view)

Single Contact

Insertion Tool

Single Contact

Removal Tool Arbor Press

PCDD SERIES PRESS-FIT CONNECTORS INSTALLATION TOOLS

Positronic recommended tools for PCDD Series Connectors and Contacts

Single Contact

Removal

Series Connector Seating Single Contact Insertion

PCDD 15 9512-1-0-41 9512-11-0-41

PCDD 26 9512-2-0-41 9512-12-0-41

9512-3-0-41 9512-13-0-41

PCDD 78 9512-5-0-41 9512-15-0-41

PCDD 104 9512-16-0-41 9512-17-0-41

Male Female Male Female

DIMENSIONS ARE IN INCHES (MILLIMETERS).

ALLDIMENSIONS ARE SUBJECT TO CHANGE.

9512-103-0

FOR

ALLSIZE

9512-104-0

FOR

ALL SIZE

9512-105-0

FOR

ALLSIZE

PCDD 62 9512-4-0-41 9512-14-0-41

PCDD 44

Arbor press for connector seating tools-9530-1-0

Replacement pins for connector seating tools, Female - 855-751-0-41

1 ton capacity 4 inch throat

0.984

(24.99)

0.492 (12.50)

PCDD 15 FEMALE

0.215 (5.46)

0.090 (2.29) TYP. 0.078 (1.98)

0.078 (1.98) 0.078 (1.98)

0.078 (1.98)

0.215 (5.46)

0.090 (2.29) TYP.

0.984

(24.99)

PCDD 15 MALE

0.492 (12.50)

PCDD 44 FEMALE

PCDD 26 FEMALE PCDD 26 MALE

PCDD 44 MALE

PCDD 62 FEMALE PCDD 62 MALE

PCDD 78 FEMALE PCDD 78 MALE

PCDD 104 FEMALE PCDD 104 MALE

0.078 (1.98)

1.312

(33.32) 1.312

(33.32)

0.090 (2.29) TYP.

0.095 (2.41) TYP.

1.852

(47.04) 1.852

(47.04)

2.500

(63.50)

2.406

(61.11)

2.500

(63.50)

0.095 (2.41) TYP.

0.090 (2.29) TYP.

0.090 (2.29)TYP.

0.385 (9.78) 0.385 (9.78)

0.078 (1.98)

1.250

(31.75) 0.975

(24.77)

0.655

(16.64)

0.926

(23.52)

0.656

(16.66)

1.203

(30.56) 0.903

(22.94)

0.082 (2.08)

0.082 (2.08) TYP.

0.967

(24.56)

1.250

(31.75)

0.656

(16.66)

0.655

(16.64) 0.926

(23.52)

0.078 (1.98)

0.082 (2.08)

1.250

(31.75)

2.500

(63.50)

0.967

(24.56)

0.095 (2.41) TYP.

2.406

(61.11) 1.203

(30.56)

0.903

(22.94)

2.500

(63.50) 1.250

(31.75)

0.975

(24.77)

15µ (0.0005) Minimum

Tin or Tin–Lead

Plate Thickness

Ø1.50±0.025

(0.0453±0.0010)

Drilled Hole

25µ (0.0010) Minimum

Copper Plate Thickness

Ø1.000+0.090-0.060

(0.0394+0.0035-0.0024)

Finished Hole

CONTACT HOLE DIAMETERS

0.082 (2.08) TYP.

0.123 (3.12)

COMPLIANT PRESS-FIT CONNECTOR PRINTED BOARD

CONTACT HOLE PATTERN

PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCDD

Series

0.123 (3.12)

Suggest Ø 0.120 (3.05)

Mounting hole size

PROFESSIONAL QUALITY, HIGH DENSITY COMPLIANT TERMINATION

REPAIRABLE CONTACT, PRESS-FIT SUBMINIATURE-D CONNECTORS

FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTALAPPLICATIONS

PCDD

Series

STEP

STEP 1 - Basic Series

PCDD Series

STEP 2 - PCDD Series Connector Variants

15, 26, 44, 62, 78, 104

STEP 3 - Connector Gender

M - Male

F - Female

FC - Female, Closed Entry

STEP 4 - Type of Contacts

98 - Omega type compliant.

STEP 7 - Locking and Polarizing Systems

0 - None.

V3 - Lock Tab.

T6 - Fixed Male and Female Polarized Jackscrews.

T2 - Fixed Female Jackscrews, 4-40 Thread.

Note: These options must be ordered with connector

and cannot be ordered separately.

STEP 6 - Hoods

0 - None

STEP 8 - Shell Options

0 - Zinc Plated with Dichromate Seal.

X - Tin Plated.

Z - Tin Plated and Dimpled.

STEP 5 - Mounting Style

S - Swaged Mounting Post 4-40 Threads

0.265 (6,73) Length.

S T E P 9 - Special Options

Consult Sales Department.

ORDERING INFORMATION – CODE NUMBERING SYSTEM

Specify Complete Connector By Following Steps 1 Through 9

Insert “0” When Step Is Not Used

1 2 3 4 5 6

PCDD 26 M 98 S 0 T2

MALE OPEN ENTRY FEMALE CLOSED ENTRY FEMALE

4803-21-0-* 4804-25-0-* 4804-249-0-*

* - PLATING OPTIONS FOR REPLACEMENT CONTACTS

-14 GOLD 0.000030 (0.75 MICRONS) OVER NICKEL PLATE

-51 GOLD FLASH OVER NICKEL PLATE

REPLACEMENT CONTACTS

PART NUMBERS

MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC *

PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER

MIL-DTL-24308/MIL-C-39029/MIL-C-85049

QUALIFIED PRODUCTS LISTING

Q.P.L.

CONNECTORS

Positronic Industries offers the following listing of connectors and connector accessories, which are products qualified under Military Specification

MIL-DTL-24308, MIL-C-39029 and MIL-C-85049. For additional Q.P.L. connectors, please consult the factory sales office.

M24308/1-1 HDC9F20000-50

M24308/1-1F HDC9F2000C-50

M24308/1-2 HDC15F20000-50

M24308/1-2F HDC15F2000C-50

M24308/1-3 HDC25F20000-50

M24308/1-3F HDC25F2000C-50

M24308/1-4 HDC37F20000-50

M24308/1-4F HDC37F2000C-50

M24308/1-5 HDC50F20000-50

M24308/1-5F HDC50F2000C-50

M24308/1-23 HDC9F2F000-50

M24308/1-23F HDC9F2F00C-50

M24308/1-24 HDC15F2F000-50

M24308/1-24F HDC15F2F00C-50

M24308/1-25 HDC25F2F000-50

M24308/1-25F HDC25F2F00C-50

M24308/1-26 HDC37F2F000-50

M24308/1-26F HDC37F2F00C-50

M24308/1-27 HDC50F2F000-50

M24308/1-27F HDC50F2F00C-50

M24308/1-34 HDC9F20000-50-799.0

M24308/1-35 HDC15F20000-50-799.0

M24308/1-36 HDC25F20000-50-799.0

M24308/1-37 HDC37F20000-50-799.0

M24308/1-38 HDC50F20000-50-799.0

M24308/1-56 HDC9F2F000-50-799.2

M24308/1-57 HDC15F2F000-50-799.2

M24308/1-58 HDC25F2F000-50-799.2

M24308/1-59 HDC37F2F000-50-799.2

M24308/1-60 HDC50F2F000-50-799.2

M24308/2-1 RD9F10000-50

M24308/2-1F RD9F1000C-50

M24308/2-2 RD15F10000-50

M24308/2-2F RD15F1000C-50

M24308/2-3 RD25F10000-50

M24308/2-3F RD25F1000C-50

M24308/2-4 RD37F10000-50

M24308/2-4F RD37F1000C-50

M24308/2-5 RD50F10000-50

M24308/2-5F RD50F1000C-50

M24308/2-6 RD9F10000-50-400.0

M24308/2-6F RD9F1000C-50-400.0

M24308/2-7 RD15F10000-50-400.0

M24308/2-7F RD15F1000C-50-400.0

M24308/2-8 RD25F10000-50-400.0

M24308/2-8F RD25F1000C-50-400.0

M24308/2-9 RD37F10000-50-400.0

M24308/2-9F RD37F1000C-50-400.0

M24308/2-10 RD50F10000-50-400.0

M24308/2-10F RD50F1000C-50-400.0

M24308/2-11 DD15F10000-50

M24308/2-11F DD15F1000C-50

M24308/2-12 DD26F10000-50

M24308/2-12F DD26F1000C-50

M24308/2-13 DD44F10000-50

M24308/2-13F DD44F1000C-50

M24308/2-14 DD62F10000-50

M24308/2-14F DD62F1000C-50

M24308/2-15 DD78F10000-50

M24308/2-15F DD78F1000C-50

M24308/2-16 DD104F10000-50

M24308/2-16F DD104F1000C-50

M24308/2-17 DD15F10000-50-400.1

M24308/2-17F DD15F1000C-50-400.1

M24308/2-18 DD26F10000-50-400.1

M24308/2-18F DD26F1000C-50-400.1

M24308/2-19 DD44F10000-50-400.1

M24308/2-19F DD44F1000C-50-400.1

M24308/2-20 DD62F10000-50-400.1

M24308/2-20F DD62F1000C-50-400.1

M24308/2-21 DD78F10000-50-400.1

M24308/2-21F DD78F1000C-50-400.1

M24308/2-22 DD104F10000-50-400.1

M24308/2-22F DD104F1000C-50-400.1

M24308/2-281 RD9F00000

M24308/2-281F RD9F0000C

M24308/2-282 RD15F00000

M24308/2-282F RD15F0000C

M24308/2-283 RD25F00000

M24308/2-283F RD25F0000C

M24308/2-284 RD37F00000

M24308/2-284F RD37F0000C

M24308/2-285 RD50F00000

M24308/2-285F RD50F0000C

M24308/2-286 DD15F00000

M24308/2-286F DD15F0000C

M24308/2-287 DD26F00000

M24308/2-287F DD26F0000C

M24308/2-288 DD44F00000

M24308/2-288F DD44F0000C

M24308/2-289 DD62F00000

M24308/2-289F DD62F0000C

M24308/2-290 DD78F00000

M24308/2-290F DD78F0000C

M24308/2-291 DD104F00000

M24308/2-291F DD104F0000C

M24308/2-342 RD9F1F000-50

M24308/2-342F RD9F1F00C-50

M24308/2-343 RD15F1F000-50

M24308/2-343F RD15F1F00C-50

M24308/2-344 RD25F1F000-50

M24308/2-344F RD25F1F00C-50

M24308/2-345 RD37F1F000-50

M24308/2-345F RD37F1F00C-50

M24308/2-346 RD50F1F000-50

M24308/2-346F RD50F1F00C-50

M24308/2-347 DD15F1F000-50

M24308/2-347F DD15F1F00C-50

M24308/2-348 DD26F1F000-50

M24308/2-348F DD26F1F00C-50

M24308/2-349 DD44F1F000-50

M24308/2-349F DD44F1F00C-50

M24308/2-350 DD62F1F000-50

M24308/2-350F DD62F1F00C-50

M24308/2-351 DD78F1F000-50

M24308/2-351F DD78F1F00C-50

M24308/2-352 DD104F1F000-50

M24308/2-352F DD104F1F00C-50

M24308/2-353 RD9F1F000-50-400.0

M24308/2-353F RD9F1F00C-50-400.0

M24308/2-354 RD15F1F000-50-400.0

M24308/2-354F RD15F1F00C-50-400.0

M24308/2-355 RD25F1F000-50-400.0

M24308/2-355F RD25F1F00C-50-400.0

M24308/2-356 RD37F1F000-50-400.0

M24308/2-356F RD37F1F00C-50-400.0

M24308/2-357 RD50F1F000-50-400.0

M24308/2-357F RD50F1F00C-50-400.0

M24308/2-358 DD15F1F000-50-400.1

M24308/2-358F DD15F1F00C-50-400.1

M24308/2-359 DD26F1F000-50-400.1

M24308/2-359F DD26F1F00C-50-400.1

M24308/2-360 DD44F1F000-50-400.1

M24308/2-360F DD44F1F00C-50-400.1

M24308/2-361 DD62F1F000-50-400.1

M24308/2-361F DD62F1F00C-50-400.1

M24308/2-362 DD78F1F000-50-400.1

M24308/2-362F DD78F1F00C-50-400.1

M24308/2-363 DD104F1F000-50-400.1

M24308/2-363F DD104F1F00C-50-400.1

M24308/2-482 RD9F0F000

M24308/2-482F RD9F0F00C

M24308/2-483 RD15F0F000

M24308/2-483F RD15F0F00C

M24308/2-484 RD25F0F000

M24308/2-484F RD25F0F00C

M24308/2-485 RD37F0F000

M24308/2-485F RD37F0F00C

M24308/2-486 RD50F0F000

M24308/2-486F RD50F0F00C

M24308/2-487 DD15F0F000

M24308/2-487F DD15F0F00C

M24308/2-488 DD26F0F000

M24308/2-488F DD26F0F00C

M24308/2-489 DD44F0F000

M24308/2-489F DD44F0F00C

M24308/2-490 DD62F0F000

M24308/2-490F DD62F0F00C

M24308/2-491 DD78F0F000

M24308/2-491F DD78F0F00C

M24308/2-492 DD104F0F000

M24308/2-492F DD104F0F00C

M24308/2-516 RD9F10000-50-799.0

M24308/2-517 RD15F10000-50-799.0

M24308/2-518 RD25F10000-50-799.0

M24308/2-519 RD37F10000-50-799.0

M24308/2-520 RD50F10000-50-799.0

M24308/2-521 RD9F10000-50-799.1

M24308/2-522 RD15F10000-50-799.1

M24308/2-523 RD25F10000-50-799.1

M24308/2-524 RD37F10000-50-799.1

M24308/2-525 RD50F10000-50-799.1

M24308/2-526 DD15F10000-50-799.0

M24308/2-527 DD26F10000-50-799.0

M24308/2-528 DD44F10000-50-799.0

M24308/2-529 DD62F10000-50-799.0

M24308/2-530 DD78F10000-50-799.0

M24308/2-531 DD104F10000-50-799.0

M24308/2-532 DD15F10000-50-799.1

M24308/2-533 DD26F10000-50-799.1

M24308/2-534 DD44F10000-50-799.1

M24308/2-535 DD62F10000-50-799.1

M24308/2-536 DD78F10000-50-799.1

M24308/2-537 DD104F10000-50-799.1

M24308/2-560 RD9F00000-799.0

M24308/2-561 RD15F00000-799.0

M24308/2-562 RD25F00000-799.0

M24308/2-563 RD37F00000-799.0

M24308/2-564 RD50F00000-799.0

M24308/2-565 DD15F00000-799.0

M24308/2-566 DD26F00000-799.0

M24308/2-567 DD44F00000-799.0

M24308/2-568 DD62F00000-799.0

M24308/2-569 DD78F00000-799.0

M24308/2-570 DD104F00000-799.0

M24308/2-585 RD9F1F000-50-799.2

M24308/2-586 RD15F1F000-50-799.2

M24308/2-587 RD25F1F000-50-799.2

M24308/2-588 RD37F1F000-50-799.2

M24308/2-589 RD50F1F000-50-799.2

M24308/2-590 DD15F1F000-50-799.2

M24308/2-591 DD26F1F000-50-799.2

M24308/2-592 DD44F1F000-50-799.2

M24038/2-593 DD62F1F000-50-799.2

M24308/2-594 DD78F1F000-50-799.2

M24308/2-595 DD104F1F000-50-799.2

M24308/2-596 RD9F1F000-50-799.3

M24308/2-597 RD15F1F000-50-799.3

M24308/2-598 RD25F1F000-50-799.3

M24308/2-599 RD37F1F000-50-799.3

M24308/2-600 RD50F1F000-50-799.3

M24308/2-601 DD15F1F000-50-799.3

M24308/2-602 DD26F1F000-50-799.3

M24308/2-603 DD44F1F000-50-799.3

M24308/2-604 DD62F1F000-50-799.3

M24308/2-605 DD78F1F000-50-799.3

M24308/2-606 DD104F1F000-50-799.3

M24308/2-607 RD9F0F000-799.2

M24308/2-608 RD15F0F000-799.2

M24308/2-609 RD25F0F000-799.2

M24308/2-610 RD37F0F000-799.2

M24308/2-611 RD50F0F000-799.2

M24308/2-612 DD15F0F000-799.2

M24308/2-613 DD26F0F000-799.2

M24308/2-614 DD44F0F000-799.2

M24308/2-615 DD62F0F000-799.2

M24308/2-616 DD78F0F000-799.2

M24308/2-617 DD104F0F000-799.2

M24308/3-1 HDC9M20000-50

M24308/3-1F HDC9M2000C-50

M24308/3-2 HDC15M20000-50

M24308/3-2F HDC15M2000C-50

M24308/3-3 HDC25M20000-50

M24308/3-3F HDC25M2000C-50

M24308/3-4 HDC37M20000-50

M24308/3-4F HDC37M2000C-50

M24308/3-5 HDC50M20000-50

M24308/3-5F HDC50M2000C-50

M24308/3-12 HDC9M2F000-50

M24308/3-12F HDC9M2F00C-50

M24308/3-13 HDC15M2F000-50

M24308/3-13F HDC15M2F00C-50

M24308/3-14 HDC25M2F000-50

M24308/3-14F HDC25M2F00C-50

M24308/3-15 HDC37M2F000-50

M24308/3-15F HDC37M2F00C-50

M24308/3-16 HDC50M2F000-50

M24308/3-16F HDC50M2F00C-50

M24308/3-17 HDC9M2F000-50

M24308/3-17F HDC9M2F00C-50

M24308/3-18 HDC15M2F000-50

M24308/3-18F HDC15M2F00C-50

M24308/3-19 HDC25M2F000-50

M24308/3-19F HDC25M2F00C-50

M24308/3-20 HDC37M2F000-50

M24308/3-20F HDC37M2F00C-50

M24308/3-21 HDC50M2F000-50

M24308/3-21F HDC50M2F00C-50

M24308/3-23 HDC9M20000-50-799.0

M24308/3-24 HDC15M20000-50-799.0

M24308/3-25 HDC25M20000-50-799.0

M24308/3-26 HDC37M20000-50-799.0

M24308/3-27 HDC50M20000-50-799.0

M24308/3-39 HDC9M2F000-50-799.2

M24308/3-40 HDC15M2F000-50-799.2

M24308/3-41 HDC25M2F000-50-799.2

M24308/3-42 HDC37M2F000-50-799.2

M24308/3-43 HDC50M2F000-50-799.2

M24308/4-1 RD9M10000-50

M24308/4-1F RD9M1000C-50

M24308/4-2 RD15M10000-50

M24308/4-2F RD15M1000C-50

M24308/4-3 RD25M10000-50

M24308/4-3F RD25M1000C-50

M24308/4-4 RD37M10000-50

M24308/4-4F RD37M1000C-50

M24308/4-5 RD50M10000-50

M24308/4-5F RD50M1000C-50

M24308/4-6 RD9M10000-50-400.0

M24308/4-6F RD9M1000C-50-400.0

M24308/4-7 RD15M10000-50-400.0

M24308/4-7F RD15M1000C-50-400.0

M24308/4-8 RD25M10000-50-400.0

M24308/4-8F RD25M1000C-50-400.0

M24308/4-9 RD37M10000-50-400.0

M24308/4-9F RD37M1000C-50-400.0

M24308/4-10 RD50M10000-50-400.0

M24308/4-10F RD50M1000C-50-400.0

M24308/4-11 DD15M10000-50

M24308/4-11F DD15M1000C-50

M24308/4-12 DD26M10000-50

M24308/4-12F DD26M1000C-50

M24308/4-13 DD44M10000-50

M24308/4-13F DD44M1000C-50

M24308/4-14 DD62M10000-50

M24308/4-14F DD62M1000C-50

M24308/4-15 DD78M10000-50

M24308/4-15F DD78M1000C-50

M24308/4-16 DD104M10000-50

M24308/4-16F DD104M1000C-50

M24308/4-17 DD15M10000-50-400.1

M24308/4-17F DD15M1000C-50-400.1

M24308/4-18 DD26M10000-50-400.1

M24308/4-18F DD26M1000C-50-400.1

M24308/4-19 DD44M10000-50-400.1

M24308/4-19F DD44M1000C-50-400.1

M24308/4-20 DD62M10000-50-400.1

M24308/4-20F DD62M1000C-50-400.1

M24308/4-21 DD78M10000-50-400.1

M24308/4-21F DD78M1000C-50-400.1

M24308/4-22 DD104M10000-50-400.1

M24308/4-22F DD104M1000C-50-400.1

M24308/4-259 RD9M00000

M24308/4-259F RD9M0000C

M24308/4-260 RD15M00000

M24308/4-260F RD15M0000C

M24308/4-261 RD25M00000

M24308/4-261F RD25M0000C

M24308/4-262 RD37M00000

M24308/4-262F RD37M0000C

M24308/4-263 RD50M00000

M24308/4-263F RD50M0000C

M24308/4-264 DD15M00000

M24308/4-264F DD15M0000C

M24308/4-265 DD26M00000

M24308/4-265F DD26M0000C

M24308/4-266 DD44M00000

M24308/4-266F DD44M0000C

M24308/4-267 DD62M00000

M24308/4-267F DD62M0000C

M24308/4-268 DD78M00000

M24308/4-268F DD78M0000C

M24308/4-269 DD104M00000

M24308/4-269F DD104M0000C

M24308/4-302 RD9M1F000-50

M24308/4-302F RD9M1F00C-50

*NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only.

M24308/4-303 RD15M1F000-50

M24308/4-303F RD15M1F00C-50

M24308/4-304 RD25M1F000-50

M24308/4-304F RD25M1F00C-50

M24308/4-305 RD37M1F000-50

M24308/4-305F RD37M1F00C-50

M24308/4-306 RD50M1F000-50

M24308/4-306F RD50M1F00C-50

M24308/4-313 RD9M1F000-50-400.0

M24308/4-313F RD9M1F00C-50-400.0

M24308/4-314 RD15M1F000-50-400.0

M24308/4-314F RD15M1F00C-50-400.0

M24308/4-315 RD25M1F000-50-400.0

M24308/4-315F RD25M1F00C-50-400.0

M24308/4-316 RD37M1F000-50-400.0

M24308/4-316F RD37M1F00C-50-400.0

M24308/4-317 RD50M1F000-50-400.0

M24308/4-317F RD50M1F00C-50-400.0

M24308/4-324 RD9M0F000

M24308/4-324F RD9M0F00C

M24308/4-325 RD15M0F000

M24308/4-325F RD15M0F00C

M24308/4-326 RD25M0F000

M24308/4-326F RD25M0F00C

M24308/4-327 RD37M0F000

M24308/4-327F RD37M0F00C

M24308/4-328 RD50M0F000

M24308/4-328F RD50M0F00C

M24308/4-335 RD9M10000-50-799.0

M24308/4-336 RD15M10000-50-799.0

M24308/4-337 RD25M10000-50-799.0

M24308/4-338 RD37M10000-50-799.0

M24308/4-339 RD50M10000-50-799.0

M24308/4-340 RD9M10000-50-799.1

M24308/4-341 RD15M10000-50-799.1

M24308/4-342 RD25M10000-50-799.1

M24308/4-343 RD37M10000-50-799.1

M24308/4-344 RD50M10000-50-799.1

M24308/4-345 DD15M10000-50-799.0

M24308/4-346 DD26M10000-50-799.0

M24308/4-347 DD44M10000-50-799.0

M24308/4-348 DD62M10000-50-799.0

M24308/4-349 DD78M10000-50-799.0

M24308/4-350 DD104M10000-50-799.0

M24308/4-351 DD15M10000-50-799.1

M24308/4-352 DD26M10000-50-799.1

M24308/4-353 DD44M10000-50-799.1

M24308/4-354 DD62M10000-50-799.1

M24308/4-355 DD78M10000-50-799.1

M24308/4-356 DD104M10000-50-799.1

M24308/4-357 RD9M00000-799.0

M24308/4-358 RD15M00000-799.0

M24308/4-359 RD25M00000-799.0

M24308/4-360 RD37M00000-799.0

M24308/4-361 RD50M00000-799.0

M24308/4-362 DD15M00000-799.0

M24308/4-363 DD26M00000-799.0

M24308/4-364 DD44M00000-799.0

M24308/4-365 DD62M00000-799.0

M24308/4-366 DD78M00000-799.0

M24308/4-367 DD104M00000-799.0

M24308/4-401 RD9M1F000-50-799.2

M24308/4-402 RD15M1F000-50-799.2

M24308/4-403 RD25M1F000-50-799.2

M24308/4-404 RD37M1F000-50-799.2

M24308/4-405 RD50M1F000-50-799.2

M24308/4-406 DD15M1F000-50-799.2

M24308/4-407 DD26M1F000-50-799.2

M24308/4-408 DD44M1F000-50-799.2

M24308/4-409 DD62M1F000-50-799.2

M24308/4-410 DD78M1F000-50-799.2

M24308/4-411 DD104M1F000-50-799.2

M24308/4-412 RD9M1F000-50-799.3

M24308/4-413 RD15M1F000-50-799.3

M24308/4-414 RD25M1F000-50-799.3

M24308/4-415 RD37M1F000-50-799.3

M24308/4-416 RD50M1F000-50-799.3

M24308/4-417 DD15M1F000-50-799.3

M24308/4-418 DD26M1F000-50-799.3

M24308/4-419 DD44M1F000-50-799.3

M24308/4-420 DD62M1F000-50-799.3

M24308/4-421 DD78M1F000-50-799.3

M24308/4-422 DD104M1F000-50-799.3

M24308/4-423 RD9M0F000-799.2

M24308/4-424 RD15M0F000-799.2

M24308/4-425 RD25M0F000-799.2

M24308/4-426 RD37M0F000-799.2

M24308/4-427 RD50M0F000-799.2

M24308/4-428 DD15M0F000-799.2

M24308/4-429 DD26M0F000-799.2

M24308/4-430 DD44M0F000-799.2

M24308/4-431 DD62M0F000-799.2

M24308/4-432 DD78M0F000-799.2

M24308/4-433 DD104M0F000-799.2

M24308/4-435 RD9M1F000-50

M24308/4-435F RD9M1F00C-50

M24308/4-436 RD15M1F000-50

M24308/4-436F RD15M1F00C-50

M24308/4-437 RD25M1F000-50

M24308/4-437F RD25M1F00C-50

M24308/4-438 RD37M1F000-50

M24308/4-438F RD37M1F00C-50

M24308/4-439 RD50M1F000-50

M24308/4-439F RD50M1F00C-50

M24308/4-440 DD15M10000-50

M24308/4-440F DD15M1000C-50

M24308/4-441 DD26M10000-50

M24308/4-441F DD26M1000C-50

M24308/4-442 DD44M10000-50

M24308/4-442F DD44M1000C-50

M24308/4-443 DD62M10000-50

M24308/4-443F DD62M1000C-50

M24308/4-444 DD78M10000-50

M24308/4-444F DD78M1000C-50

M24308/4-445 DD104M10000-50

M24308/4-445F DD104M1000C-50

M24308/4-446 RD9M1F000-50-400.0

M24308/4-446F RD9M1F00C-50-400.0

M24308/4-447 RD15M1F000-50-400.0

M24308/4-447F RD15M1F00C-50-400.0

M24308/4-448 RD25M1F000-50-400.0

M24308/4-448F RD25M1F00C-50-400.0

M24308/4-449 RD37M1F000-50-400.0

M24308/4-449F RD37M1F00C-50-400.0

M24308/4-450 RD50M1F000-50-400.0

M24308/4-450F RD50M1F00C-50-400.0

M24308/4-451 DD15M1F000-50-400.1

M24308/4-451F DD15M1F00C-50-400.1

M24308/4-452 DD26M1F000-50-400.1

M24308/4-452F DD26M1F00C-50-400.1

M24308/4-453 DD44M1F000-50-400.1

M24308/4-453F DD44M1F00C-50-400.1

M24308/4-454 DD62M1F000-50-400.1

M24308/4-454F DD62M1F00C-50-400.1

M24308/4-455 DD78M1F000-50-400.1

M24308/4-455F DD78M1F00C-50-400.1

M24308/4-456 DD104M1F000-50-400.1

M24308/4-456F DD104M1F00C-50-400.1

M24308/4-457 RD9M0F000

M24308/4-457F RD9M0F00C

M24308/4-458 RD15M0F000

M24308/4-458F RD15M0F00C

M24308/4-459 RD25M0F000

M24308/4-459F RD25M0F00C

M24308/4-460 RD37M0F000

M24308/4-460F RD37M0F00C

M24308/4-461 RD50M0F000

M24308/4-461F RD50M0F00C

M24308/4-462 DD15M0F000

M24308/4-462F DD15M0F00C

M24308/4-463 DD26M0F000

M24308/4-463F DD26M0F00C

M24308/4-464 DD44M0F000

M24308/4-464F DD44M0F00C

M24308/4-465 DD62M0F000

M24308/4-465F DD62M0F00C

M24308/4-466 DD78M0F000

M24308/4-466F DD78M0F00C

M24308/4-467 DD104M0F000

M24308/4-467F DD104M0F00C

M24308/5-1 HDC9F20000-50-403.0

M24308/5-1F HDC9F2000C-50-403.0

M24308/5-1P HDC9F2000S-50

M24308/5-2 HDC15F20000-50-403.0

M24308/5-2F HDC15F2000C-50-403.0

M24308/5-2P HDC15F2000S-50

M24308/5-3 HDC25F20000-50-403.0

M24308/5-3F HDC25F2000C-50-403.0

M24308/5-3P HDC25F2000S-50

M24308/5-4 HDC37F20000-50-403.0

M24308/5-4F HDC37F2000C-50-403.0

M24308/5-4P HDC37F2000S-50

M24308/5-5 HDC50F20000-50-403.0

M24308/5-5F HDC50F2000C-50-403.0

M24308/5-5P HDC50F2000S-50

M24308/5-23 HDC9F2F000-50-403.0

M24308/5-23F HDC9F2F00C-50-403.0

M24308/5-23P HDC9F2F00S-50

M24308/5-24 HDC15F2F000-50-403.0

M24308/5-24F HDC15F2F00C-50-403.0

M24308/5-24P HDC15F2F00S-50

M24308/5-25 HDC25F2F000-50-403.0

M24308/5-25F HDC25F2F00C-50-403.0

M24308/5-25P HDC25F2F00S-50

M24308/5-26 HDC37F2F000-50-403.0

M24308/5-26F HDC37F2F00C-50-403.0

M24308/5-26P HDC37F2F00S-50

M24308/5-27 HDC50F2F000-50-403.0

M24308/5-27F HDC50F2F00C-50-403.0

M24308/5-27P HDC50F2F00S-50

M24308/5-34 HDC9F20000-50-403.3

M24308/5-35 HDC15F20000-50-403.3

M24308/5-36 HDC25F20000-50-403.3

M24308/5-37 HDC37F20000-50-403.3

M24308/5-38 HDC50F20000-50-403.3

M24308/5-56 HDC9F2F000-50-403.4

M24308/5-57 HDC15F2F000-50-403.4

M24308/5-58 HDC25F2F000-50-403.4

M24308/5-59 HDC37F2F000-50-403.4

M24308/5-60 HDC50F2F000-50-403.4

M24308/6-1 RD9F10000-50-403.0

M24308/6-1F RD9F1000C-50-403.0

M24308/6-1P RD9F1000S-50

M24308/6-2 RD15F10000-50-403.0

M24308/6-2F RD15F1000C-50-403.0

M24308/6-2P RD15F1000S-50

M24308/6-3 RD25F10000-50-403.0

M24308/6-3F RD25F1000C-50-403.0

M24308/6-3P RD25F1000S-50

M24308/6-4 RD37F10000-50-403.0

M24308/6-4F RD37F1000C-50-403.0

M24308/6-4P RD37F1000S-50

M24308/6-5 RD50F10000-50-403.0

M24308/6-5F RD50F1000C-50-403.0

M24308/6-5P RD50F1000S-50

M24308/6-6 RD9F10000-50-403.1

M24308/6-6F RD9F1000C-50-403.1

M24308/6-6P RD9F1000S-50-400.0

M24308/6-7 RD15F10000-50-403.1

M24308/6-7F RD15F1000C-50-403.1

M24308/6-7P RD15F1000S-50-400.0

M24308/6-8 RD25F10000-50-403.1

M24308/6-8F RD25F1000C-50-403.1

M24308/6-8P RD25F1000S-50-400.0

M24308/6-9 RD37F10000-50-403.1

M24308/6-9F RD37F1000C-50-403.1

M24308/6-9P RD37F1000S-50-400.0

M24308/6-10 RD50F10000-50-403.1

M24308/6-10F RD50F1000C-50-403.1

M24308/6-10P RD50F1000S-50-400.0

M24308/6-11 DD15F10000-50-403.0

M24308/6-11F DD15F1000C-50-403.0

M24308/6-11P DD15F1000S-50

M24308/6-12 DD26F10000-50-403.0

M24308/6-12F DD26F1000C-50-403.0

M24308/6-12P DD26F1000S-50

M24308/6-13 DD44F10000-50-403.0

M24308/6-13F DD44F1000C-50-403.0

M24308/6-13P DD44F1000S-50

M24308/6-14 DD62F10000-50-403.0

M24308/6-14F DD62F1000C-50-403.0

M24308/6-14P DD62F1000S-50

M24308/6-15 DD78F10000-50-403.0

M24308/6-15F DD78F1000C-50-403.0

M24308/6-15P DD78F1000S-50

M24308/6-16 DD104F10000-50-403.0

M24308/6-16F DD104F1000C-50-403.0

M24308/6-16P DD104F1000S-50

M24308/6-17 DD15F10000-50-403.2

M24308/6-17F DD15F1000C-50-403.2

M24308/6-17P DD15F1000S-50-400.1

M24308/6-18 DD26F10000-50-403.2

M24308/6-18F DD26F1000C-50-403.2

M24308/6-18P DD26F1000S-50-400.1

M24308/6-19 DD44F10000-50-403.2

M24308/6-19F DD44F1000C-50-403.2

M24308/6-19P DD44F1000S-50-400.1

M24308/6-20 DD62F10000-50-403.2

M24308/6-20F DD62F1000C-50-403.2

M24308/6-20P DD62F1000S-50-400.1

M24308/6-21 DD78F10000-50-403.2

M24308/6-21F DD78F1000C-50-403.2

M24308/6-21P DD78F1000S-50-400.1

M24308/6-22 DD104F10000-50-403.2

M24308/6-22F DD104F1000C-50-403.2

M24308/6-22P DD104F1000S-50-400.1

M24308/6-281 RD9F00000-403.0

M24308/6-281F RD9F0000C-403.0

M24308/6-281P RD9F0000S

M24308/6-282 RD15F00000-403.0

M24308/6-282F RD15F0000C-403.0

M24308/6-282P RD15F0000S

M24308/6-283 RD25F00000-403.0

M24308/6-283F RD25F0000C-403.0

M24308/6-283P RD25F0000S

M24308/6-284 RD37F00000-403.0

M24308/6-284F RD37F0000C-403.0

M24308/6-284P RD37F0000S

M24308/6-285 RD50F00000-403.0

M24308/6-285F RD50F0000C-403.0

M24308/6-285P RD50F0000S

M24308/6-286 DD15F00000-403.0

M24308/6-286F DD15F0000C-403.0

M24308/6-286P DD15F0000S

M24308/6-287 DD26F00000-403.0

M24308/6-287F DD26F0000C-403.0

M24308/6-287P DD26F0000S

M24308/6-288 DD44F00000-403.0

M24308/6-288F DD44F0000C-403.0

M24308/6-288P DD44F0000S

M24308/6-289 DD62F00000-403.0

M24308/6-289F DD62F0000C-403.0

M24308/6-289P DD62F0000S

M24308/6-290 DD78F00000-403.0

M24308/6-290F DD78F0000C-403.0

M24308/6-290P DD78F0000S

M24308/6-291 DD104F00000-403.0

M24308/6-291F DD104F0000C-403.0

M24308/6-291P DD104F0000S

M24308/6-453 RD9F1F000-50-403.0

M24308/6-453F RD9F1F00C-50-403.0

M24308/6-453P RD9F1F00S-50

M24308/6-454 RD15F1F000-50-403.0

M24308/6-454F RD15F1F00C-50-403.0

M24308/6-454P RD15F1F00S-50

M24308/6-455 RD25F1F000-50-403.0

M24308/6-455F RD25F1F00C-50-403.0

M24308/6-455P RD25F1F00S-50

M24308/6-456 RD37F1F000-50-403.0

M24308/6-456F RD37F1F00C-50-403.0

M24308/6-456P RD37F1F00S-50

M24308/6-457 RD50F1F000-50-403.0

M24308/6-457F RD50F1F00C-50-403.0

M24308/6-457P RD50F1F00S-50

M24308/6-458 DD15F1F000-50-403.0

M24308/6-458F DD15F1F00C-50-403.0

MIL-DTL-24308/MIL-C-39029/MIL-C-85049

QUALIFIED PRODUCTS LISTING

Q.P.L.

CONNECTORS

Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85.

Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84.

Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308-117-89.

Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85.

Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79.

MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC *

PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER

*NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only.

M24308/6-458P DD15F1F00S-50

M24308/6-459 DD26F1F000-50-403.0

M24308/6-459F DD26F1F00C-50-403.0

M24308/6-459P DD26F1F00S-50

M24308/6-460 DD44F1F000-50-403.0

M24308/6-460F DD44F1F00C-50-403.0

M24308/6-460P DD44F1F00S-50

M24308/6-461 DD62F1F000-50-403.0

M24308/6-461F DD62F1F00C-50-403.0

M24308/6-461P DD62F1F00S-50

M24308/6-462 DD78F1F000-50-403.0

M24308/6-462F DD78F1F00C-50-403.0

M24308/6-462P DD78F1F00S-50

M24308/6-463 DD104F1F000-50-403.0

M24308/6-463F DD104F1F00C-50-403.0

M24308/6-463P DD104F1F00S-50

M24308/6-464 RD9F1F000-50-403.1

M24308/6-464F RD9F1F00C-50-403.1

M24308/6-464P RD9F1F00S-50-400.0

M24308/6-465 RD15F1F000-50-403.1

M24308/6-465F RD15F1F00C-50-403.1

M24308/6-465P RD15F1F00S-50-400.0

M24308/6-466 RD25F1F000-50-403.1

M24308/6-466F RD25F1F00C-50-403.1

M24308/6-466P RD25F1F00S-50-400.0

M24308/6-467 RD37F1F000-50-403.1

M24308/6-467F RD37F1F00C-50-403.1

M24308/6-467P RD37F1F00S-50-400.0

M24308/6-468 RD50F1F000-50-403.1

M24308/6-468F RD50F1F00C-50-403.1

M24308/6-468P RD50F1F00S-50-400.0

M24308/6-469 DD15F1F000-50-403.2

M24308/6-469F DD15F1F00C-50-403.2

M24308/6-469P DD15F1F00S-50-400.1

M24308/6-470 DD26F1F000-50-403.2

M24308/6-470F DD26F1F00C-50-403.2

M24308/6-470P DD26F1F00S-50-400.1

M24308/6-471 DD44F1F000-50-403.2

M24308/6-471F DD44F1F00C-50-403.2

M24308/6-471P DD44F1F00S-50-400.1

M24308/6-472 DD62F1F000-50-403.2

M24308/6-472F DD62F1F00C-50-403.2

M24308/6-472P DD62F1F00S-50-400.1

M24308/6-473 DD78F1F000-50-403.2

M24308/6-473F DD78F1F00C-50-403.2

M24308/6-473P DD78F1F00S-50-400.1

M24308/6-474 DD104F1F000-50-403.2

M24308/6-474F DD104F1F00C-50-403.2

M24308/6-474P DD104F1F00S-50-400.1

M24308/6-491 RD9F0F000-403.0

M24308/6-491F RD9F0F00C-403.0

M24308/6-491P RD9F0F00S

M24308/6-492 RD15F0F000-403.0

M24308/6-492F RD15F0F00C-403.0

M24308/6-492P RD15F0F00S

M24308/6-493 RD25F0F000-403.0

M24308/6-493F RD25F0F00C-403.0

M24308/6-493P RD25F0F00S

M24308/6-494 RD37F0F000-403.0

M24308/6-494F RD37F0F00C-403.0

M24308/6-494P RD37F0F00S

M24308/6-495 RD50F0F000-403.0

M24308/6-495F RD50F0F00C-403.0

M24308/6-495P RD50F0F00S

M24308/6-496 DD15F0F000-403.0

M24308/6-496F DD15F0F00C-403.0

M24308/6-496P DD15F0F00S

M24308/6-497 DD26F0F000-403.0

M24308/6-497F DD26F0F00C-403.0

M24308/6-497P DD26F0F00S

M24308/6-498 DD44F0F000-403.0

M24308/6-498F DD44F0F00C-403.0

M24308/6-498P DD44F0F00S

M24308/6-499 DD62F0F000-403.0

M24308/6-499F DD62F0F00C-403.0

M24308/6-499P DD62F0F00S

M24308/6-500 DD78F0F000-403.0

M24308/6-500F DD78F0F00C-403.0

M24308/6-500P DD78F0F00S

M24308/6-501 DD104F0F000-403.0

M24308/6-501F DD104F0F00C-403.0

M24308/6-501P DD104F0F00S

M24308/6-502 RD9F10000-50-403.3

M24308/6-503 RD15F10000-50-403.3

M24308/6-504 RD25F10000-50-403.3

M24308/6-505 RD37F10000-50-403.3

M24308/6-506 RD50F10000-50-403.3

M24308/6-507 RD9F10000-50-403.5

M24308/6-508 RD15F10000-50-403.5

M24308/6-509 RD25F10000-50-403.5

M24308/6-510 RD37F10000-50-403.5

M24308/6-511 RD50F10000-50-403.5

M24308/6-512 DD15F10000-50-403.3

M24308/6-513 DD26F10000-50-403.3

M24308/6-514 DD44F10000-50-403.3

M24308/6-515 DD62F10000-50-403.3

M24308/6-516 DD78F10000-50-403.3

M24308/6-517 DD104F10000-50-403.3

M24308/6-518 DD15F10000-50-403.5

M24308/6-519 DD26F10000-50-403.5

M24308/6-520 DD44F10000-50-403.5

M24308/6-521 DD62F10000-50-403.5

M24308/6-522 DD78F10000-50-403.5

M24308/6-523 DD104F10000-50-403.5

M24308/6-540 RD9F00000-403.3

M24308/6-541 RD15F00000-403.3

M24308/6-542 RD25F00000-403.3

M24308/6-543 RD37F00000-403.3

M24308/6-544 RD50F00000-403.3

M24308/6-545 DD15F00000-403.3

M24308/6-546 DD26F00000-403.3

M24308/6-547 DD44F00000-403.3

M24308/6-548 DD62F00000-403.3

M24308/6-549 DD78F00000-403.3

M24308/6-550 DD104F00000-403.3

M24308/6-551 RD9F1F000-50-403.4

M24308/6-552 RD15F1F000-50-403.4

M24308/6-553 RD25F1F000-50-403.4

M24308/6-554 RD37F1F000-50-403.4

M24308/6-555 RD50F1F000-50-403.4

M24308/6-556 DD15F1F000-50-403.4

M24308/6-557 DD26F1F000-50-403.4

M24308/6-558 DD44F1F000-50-403.4

M24308/6-559 DD62F1F000-50-403.4

M24308/6-560 DD78F1F000-50-403.4

M24308/6-561 DD104F1F000-50-403.4

M24308/6-562 RD9F1F000-50-403.6

M24308/6-563 RD15F1F000-50-403.6

M24308/6-564 RD25F1F000-50-403.6

M24308/6-565 RD37F1F000-50-403.6

M24308/6-566 RD50F1F000-50-403.6

M24308/6-567 DD15F1F000-50-403.6

M24308/6-568 DD26F1F000-50-403.6

M24308/6-569 DD44F1F000-50-403.6

M24308/6-570 DD62F1F000-50-403.6

M24308/6-571 DD78F1F000-50-403.6

M24308/6-572 DD104F1F000-50-403.6

M24308/6-573 RD9F0F000-403.4

M24308/6-574 RD15F0F000-403.4

M24308/6-575 RD25F0F000-403.4

M24308/6-576 RD37F0F000-403.4

M24308/6-577 RD50F0F000-403.4

M24308/6-578 DD15F0F000-403.4

M24308/6-579 DD26F0F000-403.4

M24308/6-580 DD44F0F000-403.4

M24308/6-581 DD62F0F000-403.4

M24308/6-582 DD78F0F000-403.4

M24308/6-583 DD104F0F000-403.4

M24308/7-1 HDC9M20000-50-403.0

M24308/7-1F HDC9M2000C-50-403.0

M24308/7-1P HDC9M2000S-50

M24308/7-2 HDC15M20000-50-403.0

M24308/7-2F HDC15M2000C-50-403.0

M24308/7-2P HDC15M2000S-50

M24308/7-3 HDC25M20000-50-403.0

M24308/7-3F HDC25M2000C-50-403.0

M24308/7-3P HDC25M2000S-50

M24308/7-4 HDC37M20000-50-403.0

M24308/7-4F HDC37M2000C-50-403.0

M24308/7-4P HDC37M2000S-50

M24308/7-5 HDC50M20000-50-403.0

M24308/7-5F HDC50M2000C-50-403.0

M24308/7-5P HDC50M2000S-50

M24308/7-12 HDC9M2F000-50-403.0

M24308/7-12F HDC9M2F00C-50-403.0

M24308/7-12P HDC9M2F00S-50

M24308/7-13 HDC15M2F000-50-403.0

M24308/7-13F HDC15M2F00C-50-403.0

M24308/7-13P HDC15M2F00S-50

M24308/7-14 HDC25M2F000-50-403.0

M24308/7-14F HDC25M2F00C-50-403.0

M24308/7-14P HDC25M2F00S-50

M24308/7-15 HDC37M2F000-50-403.0

M24308/7-15F HDC37M2F00C-50-403.0

M24308/7-15P HDC37M2F00S-50

M24308/7-16 HDC50M2F000-50-403.0

M24308/7-16F HDC50M2F00C-50-403.0

M24308/7-16P HDC50M2F00S-50

M24308/7-17 HDC9M2F000-50-403.0

M24308/7-17F HDC9M2F00C-50-403.0

M24308/7-17P HDC9M2F00S-50

M24308/7-18 HDC15M2F000-50-403.0

M24308/7-18F HDC15M2F00C-50-403.0

M24308/7-18P HDC15M2F00S-50

M24308/7-19 HDC25M2F000-50-403.0

M24308/7-19F HDC25M2F00C-50-403.0

M24308/7-19P HDC25M2F00S-50

M24308/7-20 HDC37M2F000-50-403.0

M24308/7-20F HDC37M2F00C-50-403.0

M24308/7-20P HDC37M2F00S-50

M24308/7-21 HDC50M2F000-50-403.0

M24308/7-21F HDC50M2F00C-50-403.0

M24308/7-21P HDC50M2F00S-50

M24308/7-23 HDC9M20000-50-403.3

M24308/7-24 HDC15M20000-50-403.3

M24308/7-25 HDC25M20000-50-403.3

M24308/7-26 HDC37M20000-50-403.3

M24308/7-27 HDC50M20000-50-403.3

M24308/7-34 HDC9M2F000-50-403.4

M24308/7-35 HDC15M2F000-50-403.4

M24308/7-36 HDC25M2F000-50-403.4

M24308/7-37 HDC37M2F000-50-403.4

M24308/7-38 HDC50M2F000-50-403.4

M24308/8-1 RD9M10000-50-403.0

M24308/8-1F RD9M1000C-50-403.0

M24308/8-1P RD9M1000S-50

M24308/8-2 RD15M10000-50-403.0

M24308/8-2F RD15M1000C-50-403.0

M24308/8-2P RD15M1000S-50

M24308/8-3 RD25M10000-50-403.0

M24308/8-3F RD25M1000C-50-403.0

M24308/8-3P RD25M1000S-50

M24308/8-4 RD37M10000-50-403.0

M24308/8-4F RD37M1000C-50-403.0

M24308/8-4P RD37M1000S-50

M24308/8-5 RD50M10000-50-403.0

M24308/8-5F RD50M1000C-50-403.0

M24308/8-5P RD50M1000S-50

M24308/8-6 RD9M10000-50-403.1

M24308/8-6F RD9M1000C-50-403.1

M24308/8-6P RD9M1000S-50-400.0

M24308/8-7 RD15M10000-50-403.1

M24308/8-7F RD15M1000C-50-403.1

M24308/8-7P RD15M1000S-50-400.0

M24308/8-8 RD25M10000-50-403.1

M24308/8-8F RD25M1000C-50-403.1

M24308/8-8P RD25M1000S-50-400.0

M24308/8-9 RD37M10000-50-403.1

M24308/8-9F RD37M1000C-50-403.1

M24308/8-9P RD37M1000S-50-400.0

M24308/8-10 RD50M10000-50-403.1

M24308/8-10F RD50M1000C-50-403.1

M24308/8-10P RD50M1000S-50-400.0

M24308/8-11 DD15M10000-50-403.0

M24308/8-11F DD15M1000C-50-403.0

M24308/8-11P DD15M1000S-50

M24308/8-12 DD26M10000-50-403.0

M24308/8-12F DD26M1000C-50-403.0

M24308/8-12P DD26M1000S-50

M24308/8-13 DD44M10000-50-403.0

M24308/8-13F DD44M1000C-50-403.0

M24308/8-13P DD44M1000S-50

M24308/8-14 DD62M10000-50-403.0

M24308/8-14F DD62M1000C-50-403.0

M24308/8-14P DD62M1000S-50

M24308/8-15 DD78M10000-50-403.0

M24308/8-15F DD78M1000C-50-403.0

M24308/8-15P DD78M1000S-50

M24308/8-16 DD104M10000-50-403.0

M24308/8-16F DD104M1000C-50-403.0

M24308/8-16P DD104M1000S-50

M24308/8-17 DD15M10000-50-403.2

M24308/8-17F DD15M1000C-50-403.2

M24308/8-17P DD15M1000S-50-400.1

M24308/8-18 DD26M10000-50-403.2

M24308/8-18F DD26M1000C-50-403.2

M24308/8-18P DD26M1000S-50-400.1

M24308/8-19 DD44M10000-50-403.2

M24308/8-19F DD44M1000C-50-403.2

M24308/8-19P DD44M1000S-50-400.1

M24308/8-20 DD62M10000-50-403.2

M24308/8-20F DD62M1000C-50-403.2

M24308/8-20P DD62M1000S-50-400.1

M24308/8-21 DD78M10000-50-403.2

M24308/8-21F DD78M1000C-50-403.2

M24308/8-21P DD78M1000S-50-400.1

M24308/8-22 DD104M10000-50-403.2

M24308/8-22F DD104M1000C-50-403.2

M24308/8-22P DD104M1000S-50-400.1

M24308/8-259 RD9M00000-403.0

M24308/8-259F RD9M0000C-403.0

M24308/8-259P RD9M0000S

M24308/8-260 RD15M00000-403.0

M24308/8-260F RD15M0000C-403.0

M24308/8-260P RD15M0000S

M24308/8-261 RD25M00000-403.0

M24308/8-261F RD25M0000C-403.0

M24308/8-261P RD25M0000S

M24308/8-262 RD37M00000-403.0

M24308/8-262F RD37M0000C-403.0

M24308/8-262P RD37M0000S

M24308/8-263 RD50M00000-403.0

M24308/8-263F RD50M0000C-403.0

M24308/8-263P RD50M0000S

M24308/8-264 DD15M00000-403.0

M24308/8-264F DD15M0000C-403.0

M24308/8-264P DD15M0000S

M24308/8-265 DD26M00000-403.0

M24308/8-265F DD26M0000C-403.0

M24308/8-265P DD26M0000S

M24308/8-266 DD44M00000-403.0

M24308/8-266F DD44M0000C-403.0

M24308/8-266P DD44M0000S

M24308/8-267 DD62M00000-403.0

M24308/8-267F DD62M0000C-403.0

M24308/8-267P DD62M0000S

M24308/8-268 DD78M00000-403.0

M24308/8-268F DD78M0000C-403.0

M24308/8-268P DD78M0000S

M24308/8-269 DD104M00000-403.0

M24308/8-269F DD104M0000C-403.0

M24308/8-269P DD104M0000S

M24308/8-335 RD9M10000-50-403.3

M24308/8-336 RD15M10000-50-403.3

M24308/8-337 RD25M10000-50-403.3

M24308/8-338 RD37M10000-50-403.3

M24308/8-339 RD50M10000-50-403.3

M24308/8-340 RD9M10000-50-403.5

M24308/8-341 RD15M10000-50-403.5

M24308/8-342 RD25M10000-50-403.5

M24308/8-343 RD37M10000-50-403.5

M24308/8-344 RD50M10000-50-403.5

M24308/8-345 DD15M10000-50-403.3

M24308/8-346 DD26M10000-50-403.3

M24308/8-347 DD44M10000-50-403.3

M24308/8-348 DD62M10000-50-403.3

M24308/8-349 DD78M10000-50-403.3

M24308/8-350 DD104M10000-50-403.3

M24308/8-351 DD15M10000-50-403.5

M24308/8-352 DD26M10000-50-403.5

M24308/8-353 DD44M10000-50-403.5

M24308/8-354 DD62M10000-50-403.5

M24308/8-355 DD78M10000-50-403.5

M24308/8-356 DD104M10000-50-403.5

MIL-DTL-24308/MIL-C-39029/MIL-C-85049

QUALIFIED PRODUCTS LISTING

Q.P.L.

CONNECTORS

Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85.

Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84.

Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308-

117-89.

Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85.

Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79.

MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC *

PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER

*NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only.

MIL-DTL-24308/MIL-C-39029/MIL-C-85049

QUALIFIED PRODUCTS LISTING

Q.P.L.

CONNECTORS Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85.

Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84.

Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308-

117-89.

Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85.

Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79.

M24308/8-357 RD9M00000-403.3

M24308/8-358 RD15M00000-403.3

M24308/8-359 RD25M00000-403.3

M24308/8-360 RD37M00000-403.3

M24308/8-361 RD50M00000-403.3

M24308/8-362 DD15M00000-403.3

M24308/8-363 DD26M00000-403.3

M24308/8-364 DD44M00000-403.3

M24308/8-365 DD62M00000-403.3

M24308/8-366 DD78M00000-403.3

M24308/8-367 DD104M00000-403.3

M24308/8-401 RD9M1F000-50-403.4

M24308/8-402 RD15M1F000-50-403.4

M24308/8-403 RD25M1F000-50-403.4

M24308/8-404 RD37M1F000-50-403.4

M24308/8-405 RD50M1F000-50-403.4

M24308/8-406 DD15M1F000-50-403.4

M24308/8-407 DD26M1F000-50-403.4

M24308/8-408 DD44M1F000-50-403.4

M24308/8-409 DD62M1F000-50-403.4

M24308/8-410 DD78M1F000-50-403.4

M24308/8-411 DD104M1F000-50-403.4

M24308/8-412 RD9M1F000-50-403.6

M24308/8-413 RD15M1F000-50-403.6

M24308/8-414 RD25M1F000-50-403.6

M24308/8-415 RD37M1F000-50-403.6

M24308/8-416 RD50M1F000-50-403.6

M24308/8-417 DD15M1F000-50-403.6

M24308/8-418 DD26M1F000-50-403.6

M24308/8-419 DD44M1F000-50-403.6

M24308/8-420 DD62M1F000-50-403.6

M24308/8-421 DD78M1F000-50-403.6

M24308/8-422 DD104M1F000-50-403.6

M24308/8-423 RD9M0F000-403.4

M24308/8-424 RD15M0F000-403.4

M24308/8-425 RD25M0F000-403.4

M24308/8-426 RD37M0F000-403.4

M24308/8-427 RD50M0F000-403.4

M24308/8-428 DD15M0F000-403.4

M24308/8-429 DD26M0F000-403.4

M24308/8-430 DD44M0F000-403.4

M24308/8-431 DD62M0F000-403.4

M24308/8-432 DD78M0F000-403.4

M24308/8-433 DD104M0F000-403.4

M24308/8-435 RD9M1F000-50-403.0

M24308/8-435F RD9M1F00C-50-403.0

M24308/8-435P RD9M1F00S-50

M24308/8-436 RD15M1F000-50-403.0

M24308/8-436F RD15M1F00C-50-403.0

M24308/8-436P RD15M1F00S-50

M24308/8-437 RD25M1F000-50-403.0

M24308/8-437F RD25M1F00C-50-403.0

M24308/8-437P RD25M1F00S-50

M24308/8-438 RD37M1F000-50-403.0

M24308/8-438F RD37M1F00C-50-403.0

M24308/8-438P RD37M1F00S-50

M24308/8-439 RD50M1F000-50-403.0

M24308/8-439F RD50M1F00C-50-403.0

M24308/8-439P RD50M1F00S-50

M24308/8-440 DD15M1F000-50-403.0

M24308/8-440F DD15M1F00C-50-403.0

M24308/8-440P DD15M1F00S-50

M24308/8-441 DD26M1F000-50-403.0

M24308/8-441F DD26M1F00C-50-403.0

M24308/8-441P DD26M1F00S-50

M24308/8-442 DD44M1F000-50-403.0

M24308/8-442F DD44M1F00C-50-403.0

M24308/8-442P DD44M1F00S-50

M24308/8-443 DD62M1F000-50-403.0

M24308/8-443F DD62M1F00C-50-403.0

M24308/8-443P DD62M1F00S-50

M24308/8-444 DD78M1F000-50-403.0

M24308/8-444F DD78M1F00C-50-403.0

M24308/8-444P DD78M1F00S-50

M24308/8-445 DD104M1F000-50-403.0

M24308/8-445F DD104M1F00C-50-403.0

M24308/8-445P DD104M1F00S-50

M24308/8-446 RD9M1F000-50-403.1

M24308/8-446F RD9M1F00C-50-403.1

M24308/8-446P RD9M1F00S-50-400.0

M24308/8-447 RD15M1F000-50-403.1

M24308/8-447F RD15M1F00C-50-403.1

M24308/8-447P RD15M1F00S-50-400.0

M24308/8-448 RD25M1F000-50-403.1

M24308/8-448F RD25M1F00C-50-403.1

M24308/8-448P RD25M1F00S-50-400.0

M24308/8-449 RD37M1F000-50-403.1

M24308/8-449F RD37M1F00C-50-403.1

M24308/8-449P RD37M1F00S-50-400.0

M24308/8-450 RD50M1F000-50-403.1

M24308/8-450F RD50M1F00C-50-403.1

M24308/8-450P RD50M1F00S-50-400.0

M24308/8-451 DD15M1F000-50-403.2

M24308/8-451F DD15M1F00C-50-403.2

M24308/8-451P DD15M1F00S-50-400.1

M24308/8-452 DD26M1F000-50-403.2

M24308/8-452F DD26M1F00C-50-403.2

M24308/8-452P DD26M1F00S-50-400.1

M24308/8-453 DD44M1F000-50-403.2

M24308/8-453F DD44M1F00C-50-403.2

M24308/8-453P DD44M1F00S-50-400.1

M24308/8-454 DD62M1F000-50-403.2

M24308/8-454F DD62M1F00C-50-403.2

M24308/8-454P DD62M1F00S-50-400.1

M24308/8-455 DD78M1F000-50-403.2

M24308/8-455F DD78M1F00C-50-403.2

M24308/8-455P DD78M1F00S-50-400.1

M24308/8-456 DD104M1F000-50-403.2

M24308/8-456F DD104M1F00C-50-403.2

M24308/8-456P DD104M1F00S-50-400.1

M24308/8-457 RD9M0F000-403.0

M24308/8-457F RD9M0F00C-403.0

M24308/8-457P RD9M0F00S

M24308/8-458 RD15M0F000-403.0

M24308/8-458F RD15M0F00C-403.0

M24308/8-458P RD15M0F00S

M24308/8-459 RD25M0F000-403.0

M24308/8-459F RD25M0F00C-403.0

M24308/8-459P RD25M0F00S

M24308/8-460 RD37M0F000-403.0

M24308/8-460F RD37M0F00C-403.0

M24308/8-460P RD37M0F00S

M24308/8-461 RD50M0F000-403.0

M24308/8-461F RD50M0F00C-403.0

M24308/8-461P RD50M0F00S

M24308/8-462 DD15M0F000-403.0

M24308/8-462F DD15M0F00C-403.0

M24308/8-462P DD15M0F00S

M24608/8-463 DD26M0F000-403.0

M24308/8-463F DD26M0F00C-403.0

M24308/8-463P DD26M0F00S

M24308/8-464 DD44M0F000-403.0

M24308/8-464F DD44M0F00C-403.0

M24308/8-464P DD44M0F00S

M24308/8-465 DD62M0F000-403.0

M24308/8-465F DD62M0F00C-403.0

M24308/8-465P DD62M0F00S

M24308/8-466 DD78M0F000-403.0

M24308/8-466F DD78M0F00C-403.0

M24308/8-466P DD78M0F00S

M24308/8-467 DD104M0F000-403.0

M24308/8-467F DD104M0F00C-403.0

M24308/8-467P DD104M0F00S

M24308/23-1 HDC9F3P000-50

M24308/23-1F HDC9F3P00C-50

M24308/23-1P HDC9F3P00S-50

M24308/23-2 HDC15F3P000-50

M24308/23-2F HDC15F3P00C-50

M24308/23-2P HDC15F3P00S-50

M24308/23-3 HDC25F3P000-50

M24308/23-3F HDC25F3P00C-50

M24308/23-3P HDC25F3P00S-50

M24308/23-4 HDC37F3P000-50

M24308/23-4F HDC37F3P00C-50

M24308/23-4P HDC37F3P00S-50

M24308/23-5 HDC50F3P000-50

M24308/23-5F HDC50F3P00C-50

M24308/23-5P HDC50F3P00S-50

M24308/23-7 HDC9F3P000-50-375.10

M24308/23-7F HDC9F3P00C-50-375.10

M24308/23-7P HDC9F3P00S-50-375.10

M24308/23-8 HDC15F3P000-50-375.10

M24308/23-8F HDC15F3P00C-50-375.10

M24308/23-8P HDC15F3P00S-50-375.10

M24308/23-9 HDC25F3P000-50-375.10

M24308/23-9F HDC25F3P00C-50-375.10

M24308/23-9P HDC25F3P00S-50-375.10

M24308/23-10 HDC37F3P000-50-375.10

M24308/23-10F HDC37F3P00C-50-375.10

M24308/23-10P HDC37F3P00S-50-375.10

M24308/23-11 HDC50F3P000-50-375.10

M24308/23-11F HDC50F3P00C-50-375.10

M24308/23-11P HDC50F3P00S-50-375.10

M24308/23-13 HDC9F3P000-50-375.2

M24308/23-13F HDC9F3P00C-50-375.2

M24308/23-13P HDC9F3P00S-50-375.2

M24308/23-14 HDC15F3P000-50-375.2

M24308/23-14F HDC15F3P00C-50-375.2

M24308/23-14P HDC15F3P00S-50-375.2

M24308/23-15 HDC25F3P000-50-375.2

M24308/23-15F HDC25F3P00C-50-375.2

M24308/23-15P HDC25F3P00S-50-375.2

M24308/23-16 HDC37F3P000-50-375.2

M24308/23-16F HDC37F3P00C-50-375.2

M24308/23-16P HDC37F3P00S-50-375.2

M24308/23-17 HDC50F3P000-50-375.2

M24308/23-17F HDC50F3P00C-50-375.2

M24308/23-17P HDC50F3P00S-50-375.2

M24308/23-19 HDC9F3P000-50-375.9

M24308/23-19F HDC9F3P00C-50-375.9

M24308/23-19P HDC9F3P00S-50-375.9

M24308/23-20 HDC15F3P000-50-375.9

M24308/23-20F HDC15F3P00C-50-375.9

M24308/23-20P HDC15F3P00S-50-375.9

M24308/23-21 HDC25F3P000-50-375.9

M24308/23-21F HDC25F3P00C-50-375.9

M24308/23-21P HDC25F3P00S-50-375.9

M24308/23-22 HDC37F3P000-50-375.9

M24308/23-22F HDC37F3P00C-50-375.9

M24308/23-22P HDC37F3P00S-50-375.9

M24308/23-23 HDC50F3P000-50-375.9

M24308/23-23F HDC50F3P00C-50-375.9

M24308/23-23P HDC50F3P00S-50-375.9

M24308/23-25 HDC9F5B8000-50-376.6

M24308/23-25F HDC9F5B800C-50-376.6

M24308/23-25P HDC9F5B800S-50-376.6

M24308/23-26 HDC15F5B8000-50-376.6

M24308/23-26F HDC15F5B800C-50-376.6

M24308/23-26P HDC15F5B800S-50-376.6

M24308/23-27 HDC25F5B8000-50-376.6

M24308/23-27F HDC25F5B800C-50-376.6

M24308/23-27P HDC25F5B800S-50-376.6

M24308/23-28 HDC37F5B8000-50-376.6

M24308/23-28F HDC37F5B800C-50-376.6

M24308/23-28P HDC37F5B800S-50-376.6

M24308/23-29 HDC50F5B8000-50-376.6

M24308/23-29F HDC50F5B800C-50-376.6

M24308/23-29P HDC50F5B800S-50-376.6

M24308/23-31 HDC9F5B8000-50

M24308/23-31F HDC9F5B800C-50

M24308/23-31P HDC9F5B800S-50

M24308/23-32 HDC15F5B8000-50

M24308/23-32F HDC15F5B800C-50

M24308/23-32P HDC15F5B800S-50

M24308/23-33 HDC25F5B8000-50

M24308/23-33F HDC25F5B800C-50

M24308/23-33P HDC25F5B800S-50

M24308/23-34 HDC37F5B8000-50

M24308/23-34F HDC37F5B800C-50

M24308/23-34P HDC37F5B800S-50

M24308/23-35 HDC50F5B8000-50

M24308/23-35F HDC50F5B800C-50

M24308/23-35P HDC50F5B800S-50

M24308/23-37 HDC9F5B8000-50-376.5

M24308/23-37F HDC9F5B800C-50-376.5

M24308/23-37P HDC9F5B800S-50-376.5

M24308/23-38 HDC15F5B8000-50-376.5

M24308/23-38F HDC15F5B800C-50-376.5

M24308/23-38P HDC15F5B800S-50-376.5

M24308/23-39 HDC25F5B8000-50-376.5

M24308/23-39F HDC25F5B800C-50-376.5

M24308/23-39P HDC25F5B800S-50-376.5

M24308/23-40 HDC37F5B8000-50-376.5

M24308/23-40F HDC37F5B800C-50-376.5

M24308/23-40P HDC37F5B800S-50-376.5

M24308/23-41 HDC50F5B8000-50-376.5

M24308/23-41F HDC50F5B800C-50-376.5

M24308/23-41P HDC50F5B800S-50-376.5

M24308/23-43 HDC9F5B8000-50-376.2

M24308/23-43F HDC9F5B800C-50-376.2

M24308/23-43P HDC9F5B800S-50-376.2

M24308/23-44 HDC15F5B8000-50-376.2

M24308/23-44F HDC15F5B800C-50-376.2

M24308/23-44P HDC15F5B800S-50-376.2

M24308/23-45 HDC25F5B8000-50-376.2

M24308/23-45F HDC25F5B800C-50-376.2

M24308/23-45P HDC25F5B800S-50-376.2

M24308/23-46 HDC37F5B8000-50-376.2

M24308/23-46F HDC37F5B800C-50-376.2

M24308/23-46P HDC37F5B800S-50-376.2

M24308/23-47 HDC50F5B8000-50-376.2

M24308/23-47F HDC50F5B800C-50-376.2

M24308/23-47P HDC50F5B800S-50-376.2

M24308/23-49 HDC9F5B8000-50-376.8

M24308/23-49F HDC9F5B800C-50-376.8

M24308/23-49P HDC9F5B800S-50-376.8

M24308/23-50 HDC15F5B8000-50-376.8

M24308/23-50F HDC15F5B800C-50-376.8

M24308/23-50P HDC15F5B800S-50-376.8

M24308/23-51 HDC25F5B8000-50-376.8

M24308/23-51F HDC25F5B800C-50-376.8

M24308/23-51P HDC25F5B800S-50-376.8

M24308/23-52 HDC37F5B8000-50-376.8

M24308/23-52F HDC37F5B800C-50-376.8

M24308/23-52P HDC37F5B800S-50-376.8

M24308/23-53 HDC50F5B8000-50-376.8

M24308/23-53F HDC50F5B800C-50-376.8

M24308/23-53P HDC50F5B800S-50-376.8

M24308/23-55 HDC9F5B8000-50-376.7

M24308/23-55F HDC9F5B800C-50-376.7

M24308/23-55P HDC9F5B800S-50-376.7

M24308/23-56 HDC15F5B8000-50-376.7

M24308/23-56F HDC15F5B800C-50-376.7

M24308/23-56P HDC15F5B800S-50-376.7

M24308/23-57 HDC25F5B8000-50-376.7

M24308/23-57F HDC25F5B800C-50-376.7

M24308/23-57P HDC25F5B800S-50-376.7

M24308/23-58 HDC37F5B8000-50-376.7

M24308/23-58F HDC37F5B800C-50-376.7

M24308/23-58P HDC37F5B800S-50-376.7

M24308/23-59 HDC50F5B8000-50-376.7

M24308/23-59F HDC50F5B800C-50-376.7

M24308/23-59P HDC50F5B800S-50-376.7

M24308/23-61 DD15F3P000-50

M24308/23-61F DD15F3P00C-50

M24308/23-61P DD15F3P00S-50

M24308/23-62 DD26F3P000-50

M24308/23-62F DD26F3P00C-50

M24308/23-62P DD26F3P00S-50

M24308/23-63 DD44F3P000-50

M24308/23-63F DD44F3P00C-50

M24308/23-63P DD44F3P00S-50

M24308/23-64 DD62F3P000-50

M24308/23-64F DD62F3P00C-50

M24308/23-64P DD62F3P00S-50

M24308/23-65 DD78F3P000-50

M24308/23-65F DD78F3P00C-50

M24308/23-65P DD78F3P00S-50

M24308/23-67 DD15F32P000-50

M24308/23-67F DD15F32P00C-50

M24308/23-67P DD15F32P00S-50

M24308/23-68 DD26F32P000-50

M24308/23-68F DD26F32P00C-50

M24308/23-68P DD26F32P00S-50

M24308/23-69 DD44F32P000-50

M24308/23-69F DD44F32P00C-50

M24308/23-69P DD44F32P00S-50

M24308/23-70 DD62F32P000-50

M24308/23-70F DD62F32P00C-50

M24308/23-70P DD62F32P00S-50

MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC *

PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER

*NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only.

MIL-DTL-24308/MIL-C-39029/MIL-C-85049

QUALIFIED PRODUCTS LISTING

Q.P.L.

CONNECTORS Positronic HDC Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-618-79/24308-1210-85.

Positronic RD Series hoods are Q.P.L. approved to MIL-C-85049 per test report number 85049-870-84.

Positronic DD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-1209-85/24308-1210-85/24308-

117-89.

Positronic RD Series connectors are Q.P.L. approved to MIL-DTL-24308 per test report number 24308-211-79/24308-1210-85.

Positronic RD Series contacts are Q.P.L. approved to MIL-C-39029 per test report number 39029-694-79.

M24308/23-71 DD78F32P000-50

M24308/23-71F DD78F32P00C-50

M24308/23-71P DD78F32P00S-50

M24308/23-73 DD15F4B8000-50

M24308/23-73F DD15F4B800C-50

M24308/23-73P DD15F4B800S-50

M24308/23-74 DD26F4B8000-50

M24308/23-74F DD26F4B800C-50

M24308/23-74P DD26F4B800S-50

M24308/23-75 DD44F4B8000-50

M24308/23-75F DD44F4B800C-50

M24308/23-75P DD44F4B800S-50

M24308/23-76 DD62F4B8000-50

M24308/23-76F DD62F4B800C-50

M24308/23-76P DD62F4B800S-50

M24308/23-77 DD78F4B8000-50

M24308/23-77F DD78F4B800C-50

M24308/23-77P DD78F4B800S-50

M24308/24-1 HDC9M3P000-50

M24308/24-1F HDC9M3P00C-50

M24308/24-1P HDC9M3P00S-50

M24308/24-2 HDC15M3P000-50

M24308/24-2F HDC15M3P00C-50

M24308/24-2P HDC15M3P00S-50

M24308/24-3 HDC25M3P000-50

M24308/24-3F HDC25M3P00C-50

M24308/24-3P HDC25M3P00S-50

M24308/24-4 HDC37M3P000-50

M24308/24-4F HDC37M3P00C-50

M24308/24-4P HDC37M3P00S-50

M24308/24-5 HDC50M3P000-50

M24308/24-5F HDC50M3P00C-50

M24308/24-5P HDC50M3P00S-50

M24308/24-7 HDC9M3P000-50-375.10

M24308/24-7F HDC9M3P00C-50-375.10

M24308/24-7P HDC9M3P00S-50-375.10

M24308/24-8 HDC15M3P000-50-375.10

M24308/24-8F HDC15M3P00C-50-375.10

M24308/24-8P HDC15M3P00S-50-375.10

M24308/24-9 HDC25M3P000-50-375.10

M24308/24-9F HDC25M3P00C-50-375.10

M24308/24-9P HDC25M3P00S-50-375.10

M24308/24-10 HDC37M3P000-50-375.10

M24308/24-10F HDC37M3P00C-50-375.10

M24308/24-10P HDC37M3P00S-50-375.10

M24308/24-11 HDC50M3P000-50-375.10

M24308/24-11F HDC50M3P00C-50-375.10

M24308/24-11P HDC50M3P00S-50-375.10

M24308/24-13 HDC9M3P000-50-375.3

M24308/24-13F HDC9M3P00C-50-375.3

M24308/24-13P HDC9M3P00S-50-375.3

M24308/24-14 HDC15M3P000-50-375.3

M24308/24-14F HDC15M3P00C-50-375.3

M24308/24-14P HDC15M3P00S-50-375.3

M24308/24-15 HDC25M3P000-50-375.3

M24308/24-15F HDC25M3P00C-50-375.3

M24308/24-15P HDC25M3P00S-50-375.3

M24308/24-16 HDC37M3P000-50-375.3

M24308/24-16F HDC37M3P00C-50-375.3

M24308/24-16P HDC37M3P00S-50-375.3

M24308/24-17 HDC50M3P000-50-375.3

M24308/24-17F HDC50M3P00C-50-375.3

M24308/24-17P HDC50M3P00S-50-375.3

M24308/24-19 HDC9M3P000-50-375.9

M24308/24-19F HDC9M3P00C-50-375.9

M24308/24-19P HDC9M3P00S-50-375.9

M24308/24-20 HDC15M3P000-50-375.9

M24308/24-20F HDC15M3P00C-50-375.9

M24308/24-20P HDC15M3P00S-50-375.9

M24308/24-21 HDC25M3P000-50-375.9

M24308/24-21F HDC25M3P00C-50-375.9

M24308/24-21P HDC25M3P00S-50-375.9

M24308/24-22 HDC37M3P000-50-375.9

M24308/24-22F HDC37M3P00C-50-375.9

M24308/24-22P HDC37M3P00S-50-375.9

M24308/24-23 HDC50M3P000-50-375.9

M24308/24-23F HDC50M3P00C-50-375.9

M24308/24-23P HDC50M3P00S-50-375.9

M24308/24-25 HDC9M5B8000-50-376.6

M24308/24-25F HDC9M5B800C-50-376.6

M24308/24-25P HDC9M5B800S-50-376.6

M24308/24-26 HDC15M5B8000-50-376.6

M24308/24-26F HDC15M5B800C-50-376.6

M24308/24-26P HDC15M5B800S-50-376.6

M24308/24-27 HDC25M5B8000-50-376.6

M24308/24-27F HDC25M5B800C-50-376.6

M24308/24-27P HDC25M5B800S-50-376.6

M24308/24-28 HDC37M5B8000-50-376.6

M24308/24-28F HDC37M5B800C-50-376.6

M24308/24-28P HDC37M5B800S-50-376.6

M24308/24-29 HDC50M5B8000-50-376.6

M24308/24-29F HDC50M5B800C-50-376.6

M24308/24-29P HDC50M5B800S-50-376.6

M24308/24-31 HDC9M5B8000-50

M24308/24-31F HDC9M5B800C-50

M24308/24-31P HDC9M5B800S-50

M24308/24-32 HDC15M5B8000-50

M24308/24-32F HDC15M5B800C-50

M24308/24-32P HDC15M5B800S-50

M24308/24-33 HDC25M5B8000-50

M24308/24-33F HDC25M5B800C-50

M24308/24-33P HDC25M5B800S-50

M24308/24-34 HDC37M5B8000-50

M24308/24-34F HDC37M5B800C-50

M24308/24-34P HDC37M5B800S-50

M24308/24-35 HDC50M5B8000-50

M24308/24-35F HDC50M5B800C-50

M24308/24-35P HDC50M5B800S-50

M24308/24-37 HDC9M5B8000-50-376.5

M24308/24-37F HDC9M5B800C-50-376.5

M24308/24-37P HDC9M5B800S-50-376.5

M24308/24-38 HDC15M5B8000-50-376.5

M24308/24-38F HDC15M5B800C-50-376.5

M24308/24-38P HDC15M5B800S-50-376.5

M24308/24-39 HDC25M5B8000-50-376.5

M24308/24-39F HDC25M5B800C-50-376.5

M24308/24-39P HDC25M5B800S-50-376.5

M24308/24-40 HDC37M5B8000-50-376.5

M24308/24-40F HDC37M5B800C-50-376.5

M24308/24-40P HDC37M5B800S-50-376.5

M24308/24-41 HDC50M5B8000-50-376.5

M24308/24-41F HDC50M5B800C-50-376.5

M24308/24-41P HDC50M5B800S-50-376.5

M24308/24-43 HDC9M5B8000-50-376.3

M24308/24-43F HDC9M5B800C-50-376.3

M24308/24-43P HDC9M5B800S-50-376.3

M24308/24-44 HDC15M5B8000-50-376.3

M24308/24-44F HDC15M5B800C-50-376.3

M24308/24-44P HDC15M5B800S-50-376.3

M24308/24-45 HDC25M5B8000-50-376.3

M24308/24-45F HDC25M5B800C-50-376.3

M24308/24-45P HDC25M5B800S-50-376.3

M24308/24-46 HDC37M5B8000-50-376.3

M24308/24-46F HDC37M5B800C-50-376.3

M24308/24-46P HDC37M5B800S-50-376.3

M24308/24-47 HDC50M5B8000-50-376.3

M24308/24-47F HDC50M5B800C-50-376.3

M24308/24-47P HDC50M5B800S-50-376.3

M24308/24-49 HDC9M5B8000-50-376.8

M24308/24-49F HDC9M5B800C-50-376.8

M24308/24-49P HDC9M5B800S-50-376.8

M24308/24-50 HDC15M5B8000-50-376.8

M24308/24-50F HDC15M5B800C-50-376.8

M24308/24-50P HDC15M5B800S-50-376.8

M24308/24-51 HDC25M5B8000-50-376.8

M24308/24-51F HDC25M5B800C-50-376.8

M24308/24-51P HDC25M5B800S-50-376.8

M24308/24-52 HDC37M5B8000-50-376.8

M24308/24-52F HDC37M5B800C-50-376.8

M24308/24-52P HDC37M5B800S-50-376.8

M24308/24-53 HDC50M5B8000-50-376.8

M24308/24-53F HDC50M5B800C-50-376.8

M24308/24-53P HDC50M5B800S-50-376.8

M24308/24-55 HDC9M5B8000-50-376.7

M24308/24-55F HDC9M5B800C-50-376.7

M24308/24-55P HDC9M5B800S-50-376.7

M24308/24-56 HDC15M5B8000-50-376.7

M24308/24-56F HDC15M5B800C-50-376.7

M24308/24-56P HDC15M5B800S-50-376.7

M24308/24-57 HDC25M5B8000-50-376.7

M24308/24-57F HDC25M5B800C-50-376.7

M24308/24-57P HDC25M5B800S-50-376.7

M24308/24-58 HDC37M5B8000-50-376.7

M24308/24-58F HDC37M5B800C-50-376.7

M24308/24-58P HDC37M5B800S-50-376.7

M24308/24-59 HDC50M5B8000-50-376.7

M24308/24-59F HDC50M5B800C-50-376.7

M24308/24-59P HDC50M5B800S-50-376.7

M24308/24-61 DD15M3P000-50

M24308/24-61F DD15M3P00C-50

M24308/24-61P DD15M3P00S-50

M24308/24-62 DD26M3P000-50

M24308/24-62F DD26M3P00C-50

M24308/24-62P DD26M3P00S-50

M24308/24-63 DD44M3P000-50

M24308/24-63F DD44M3P00C-50

M24308/24-63P DD44M3P00S-50

M24308/24-64 DD62M3P000-50

M24308/24-64F DD62M3P00C-50

M24308/24-64P DD62M3P00S-50

M24308/24-65 DD78M3P000-50

M24308/24-65F DD78M3P00C-50

M24308/24-65P DD78M3P00S-50

M24308/24-67 DD15M32P000-50

M24308/24-67F DD15M32P00C-50

M24308/24-67P DD15M32P00S-50

M24308/24-68 DD26M32P000-50

M24308/24-68F DD26M32P00C-50

M24308/24-68P DD26M32P00S-50

M24308/24-69 DD44M32P000-50

M24308/24-69F DD44M32P00C-50

M24308/24-69P DD44M32P00S-50

M24308/24-70 DD62M32P000-50

M24308/24-70F DD62M32P00C-50

M24308/24-70P DD62M32P00S-50

M24308/24-71 DD78M32P000-50

M24308/24-71F DD78M32P00C-50

M24308/24-71P DD78M32P00S-50

M24308/24-73 DD15M4B8000-50

M24308/24-73F DD15M4B800C-50

M24308/24-73P DD15M4B800S-50

M24308/24-74 DD26M4B8000-50

M24308/24-74F DD26M4B800C-50

M24308/24-74P DD26M4B800S-50

M24308/24-75 DD44M4B8000-50

M24308/24-75F DD44M4B800C-50

M24308/24-75P DD44M4B800S-50

M24308/24-76 DD62M4B8000-50

M24308/24-76F DD62M4B800C-50

M24308/24-76P DD62M4B800S-50

M24308/24-77 DD78M4B8000-50

M24308/24-77F DD78M4B800C-50

M24308/24-77P DD78M4B800S-50

M24308/25-6 D00000E20

M24308/25-6F D00000E20-462.31

M24308/25-6P D00000E20-462.23

M24308/26-1 D00000T20-462.32

M24308/26-1F D00000T20-462.33

M24308/26-1P D00000T20-462.7

M24308/26-2 D00000T30-462.32

M24308/26-2F D00000T30-462.33

M24308/26-2P D00000T30-462.7

CRIMPCONTACTS

M39029/57-354 FC8022D-50

M39029/58-360 MC8022D-50

M39029/63-368 FC6020D-50

M39029/64-369 MC6020D-50

METALHOODS

M85049/48-1-3F RD25000H00

M85049/48-1-4F RD37000H00

M85049/48-1-5F RD50000H00

MILITARY POSITRONIC * MILITARY POSITRONIC * MILITARY POSITRONIC *

PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER PART NUMBER

*NOTE: Parts are to be ordered to the military number, the Positronic part number is for reference only.