Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC213MS8 / 213MS8E v03.1111 Mixers - Single & Double Balanced - SMT GaAs MMIC SMT Double Balanced Mixer, 1.5 - 4.5 GHz Typical Applications Features The HMC213MS8(E) is ideal for: Excellent LO to RF Isolation: 40 dB * LTE/4G/WiMAX Infrastructure Excellent 2x2 Spurious Suppression: -71 dBc * Base Stations and Repeaters Low Conversion Loss: 8 dB * Private Land Mobile Radio (PLMR) No DC Bias & No External Matching Required * ISM, Maritime & SatCom Terminals Ideal for Upconversion & Downconversion * Microwave and Military Radios MSOP8 SMT Package, 14.8 mm Functional Diagram General Description The HMC213MS8(E) is a wideband double-balanced mixer in an 8 lead plastic surface mount package. This fully integrated MMIC mixer is fabricated in a GaAs MESFET process and requires no DC bias and no external matching components. The HMC213MS8(E) mixer integrates Schottky diode mixing elements and on-chip balun transformers to deliver excellent isolation from LO to RF and from LO to IF. The wide IF bandwidth of DC to 1.5 GHz enables this mixer to be used in a wide range of general purpose applications including upconverters, downconverters, biphase modulators, demodulators, and phase comparators. The HMC213MS8(E) operates with LO drive levels as low as +10 dBm, and exhibits excellent 2x2 spurious suppression for demanding downconversion applications. Electrical Specifications, TA = +25 C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter Min. Max. Min. Typ. Frequency Range, RF & LO 1.5 - 4.5 1.7 - 3.6 Frequency Range, IF DC - 1.5 DC - 1.5 Conversion Loss Noise Figure (SSB) 0-1 Typ. LO = +10 dBm IF = 100 MHz Units Max. GHz GHz 8 10 9 10.5 dB 8.5 10 9 10.5 dB LO to RF Isolation 29 40 32 40 dB LO to IF Isolation 27 35 26 35 dB IP3 (Input) 16 19 14 18 dBm 1 dB Gain Compression (Input) 7 10 5 8 dBm For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC213MS8 / 213MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 1.5 - 4.5 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm RF/IF LO/IF LO/RF -10 -5 -10 -40 C +25 C +85 C -15 -20 -30 -40 -50 -20 -60 1 1.5 2 2.5 3 3.5 4 4.5 5 1 1.5 2 2.5 FREQUENCY (GHz) 0 -5 -5 -10 +9 dBm +11 dBm +15 dBm -20 4 4.5 5 -10 RF IF LO -15 -20 1 1.5 2 2.5 3 3.5 4 4.5 5 0 0.5 1 1.5 FREQUENCY (GHz) 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) IF Bandwidth @ LO = +13 dBm P1dB vs. Temperature @ LO = +13 dBm 0 14 13 -5 P1dB (dBm) CONVERSION GAIN (dB) 3.5 Return Loss @ LO = +13 dBm 0 RETURN LOSS (dB) CONVERSION GAIN (dB) Conversion Gain vs. LO Drive -15 3 FREQUENCY (GHz) Mixers - Single & Double Balanced - SMT 0 ISOLATION (dB) CONVERSION GAIN (dB) 0 -10 12 11 10 LO=1.8 GHz, RF=1.9 to 4.9 GHz LO=4.4 GHz, RF=1.3 to 4.3 GHz -15 9 -20 0 0.5 1 FREQUENCY (GHz) 1.5 -40 C +25 C +85 C 2 8 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 0-2 HMC213MS8 / 213MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 1.5 - 4.5 GHz Input IP3 vs. Temperature @ LO = +13 dBm 0-3 30 25 25 INPUT IP3 (dBm) INPUT IP3 (dBm) 30 20 +11 dBm +15 dBm +13 dBm 15 10 1.5 2 2.5 3 3.5 4 20 -40 C +85 C +25 C 15 4.5 10 1.5 5 2 LO FREQUENCY (GHz) 3 3.5 4 4.5 5 4.5 5 Input IP2 vs. Temperature @ LO = +13 dBm 75 75 +11 dBm +15 dBm +13 dBm 70 70 INPUT IP2 (dBm) 65 60 55 50 45 40 1.5 2.5 LO FREQUENCY (GHz) Input IP2 vs. LO Drive INPUT IP2 (dBm) Mixers - Single & Double Balanced - SMT Input IP3 vs. LO Drive -40 C +85 C +25 C 65 60 55 50 45 2 2.5 3 3.5 LO FREQUENCY (GHz) 4 4.5 5 40 1.5 2 2.5 3 3.5 4 LO FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC213MS8 / 213MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 1.5 - 4.5 GHz Harmonics of LO @ RF Port nLO nLO Spur mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 12 22 19 52 1.5 41 34 54 53 1 13 0 44 37 60 2.0 40 29 59 59 2 74 76 71 85 71 2.5 47 29 35 62 3 94 90 92 74 84 3.0 51 34 34 62 4 >105 >105 >105 >105 >105 3.5 41 43 47 65 RF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below IF power level (-1RF + 1LO) 4.0 36 47 58 70 4.5 32 52 62 72 5.0 30 53 66 70 LO = +13 dBm Values in dBc below input LO level measured at RF Port. Absolute Maximum Ratings RF / IF Input +13 dBm LO Drive +27 dBm Continuous Pdiss (T = 85 C) (derate 10.6 mW/C above 85 C) 0.69 W Thermal Resistance (Channel to package lead) 93.7 C/W Junction Temperature 150 C Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - Single & Double Balanced - SMT MxN Spurious Outputs 0-4 HMC213MS8 / 213MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 1.5 - 4.5 GHz Mixers - Single & Double Balanced - SMT Outline Drawing 0-5 NOTES: 1.LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC213MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC213MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H213 XXXX H213 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC213MS8 / 213MS8E v03.1111 GaAs MMIC SMT Double Balanced Mixer, 1.5 - 4.5 GHz List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J3 PCB Mount SMA RF Connector U1 HMC213MS8(E) Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - Single & Double Balanced - SMT Evaluation PCB 0-6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: 103350-HMC213MS8