10600 series Professional toggle switches - threaded bushing O 10 (.393) Distinctive features and pecifications CECC approved A ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 2A 220VAC - 3A 110VAC - 3A 24VDC * Minimum load : 100A 10mV * Initial contact resistance : 10 m max. * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz min. between terminals of the same pole 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals of adjacent poles * Electrical life : 50.000 cycles HOMOLOGATION CECC 96201-007 Availability : consult factory for details of approved models. MATERIALS * Case : diallylphthalate (DAP) or high temperature plastic material (UL94-V0) * Actuator : brass, chrome plated * Bushing : brass, nickel plated * Housing : stainless steel * Contacts : - silver - silver, gold plated * Terminal seal : epoxy GENERAL SPECIFICATIONS * Torque : 1,50 Nm (1.106 Ft.lb) max. applied to nut * Max. panel thickness : 4 mm (.157) * Operating temperature : -40C to +85C Marking : to order switches marked CECC, add "CECC" to model number. ABOUT THIS SERIES Complete part numbers are shown on the following pages. Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all models : 1 knurled cap nut, 1 hex nut, 1 locking ring and 1 lockwasher. They are presented in section I. Packaging unit : 25 pieces. A-60 www.apem.com APEM 10600 series Professional toggle switches - threaded bushing O 10 (.393) 3.70 (.145) 1.90 (.074) * 2 and 3 positions * 1 and 2 pole configurations * Available with matt black finish : consult factory for model number Keyway 1.10 (.043) 1.90 (.070) 3 - ON MOM O14.00 (.551 DIA) 2 1 3 O10.00 X 0.75 SI (.393 DIA X 0.75 IS) EPOXY 4 24 II 11.00 (.433) 12.00 (.472) - ON MOM Gold plated silver contacts 106461175 ON 106421175 ON - ON MOM O10.00 X 0.75 SI (.393 DIA X 0.75 IS) O4.00 (.157 DIA) ON ON 8.50 (.334) O14.00 (.551 DIA) 4.75 (.187) 1 I 1.80 (.070) 5 1 2 3 6 2 3.70 (.145) 0.80 (.031) 3 11.00 (.433) 0.50 (.019) 4.00 (.157) 13.20 (.519) I 2-1 5-4 EPOXY Keyway I 2 II24 1 ON OFF ON MOM OFF MOM ON OFF MOM Gold plated silver contacts 106391175 ON OFF ON 106371175 MOM OFF MOM 106381175 ON OFF MOM www.apem.com 3.70 (.145) III 11.00 (.433) 7.00 (.275) 8.50 (.334) O14.00 (.551 DIA) O10.00 X 0.75 SI (.393 DIA X 0.75 IS) 1.80 (.070) 13.20 (.519) 3 11.00 (.433) 0.50 (.019) 4.00 (.157) I 2-1 1 2 3 II 0.80 (.031) III 2-3 O4.00 (.157 DIA) 3 positions - single pole APEM 8.50 (.334) Keyway II 2-3 5-6 Silver contacts 106392103 106372103 106382103 11.00 (.433) 7.00 (.275) ON MOM 2 positions - double pole Silver contacts 106462103 106422103 II 1.80 (.070) Gold plated silver contacts 106361175 ON 106321175 ON - 24 2 O4.00 (.157 DIA) ON ON I 1 3.70 (.145) 0.80 (.031) 13.20 (.519) 3 11.00 (.433) 0.50 (.019) 4.00 (.157) I 1-2 4.70 (.185) II 1-3 Silver contacts 106362103 106322103 A Keyway 2 positions - single pole 4.70 (.185) 2 4.70 (.185) 1 EPOXY A-61 10600 series Professional toggle switches - threaded bushing O 10 (.393) 3 positions - double pole ON ON ON I 6 3 5 2 II24 1 III 4 11.00 (.433) 12.00 (.472) (2-3) 11.00 (.433) 8.50 (.334) 3.70 (.145) 0.50 (.019) 4.00 (.157) 4 5 6 ON OFF ON MOM OFF MOM ON OFF MOM Keyway 0.80 (.031) 106440886* I 2-1 5-4 4.70 (.185) Silver contacts 106492103 106472103 106482103 A II 13.20 (.519) III 2-3 5-6 O14.00 (.551 DIA) 106440944* ON ON 4.75 (.187) O10.00 X 0.75 SI (.393 DIA X 0.75 IS) 1.80 (.070) Gold plated silver contacts 106491175 ON OFF ON 106471175 MOM OFF MOM 106481175 ON OFF MOM O4.00 (.157 DIA) (5-4) EPOXY ON (2-3) (5-4) * Function 4 : SP in DP case. See Positions and Connections type TH, end of catalogue. Jumper between terminals 2 and 4 to be wired by the user. PANEL CUT-OUT 6.20 (.244) O10.20 (.401 DIA) 2.20 (.086) A-62 www.apem.com APEM