DIN 41 612 * complementary type M-flat Number of contacts 78+2, 60+4, 42+6, 24+8 DIN Signal up to 2 A Female connectors Identification Female connector with solder pins 2.9 mm (without special contacts)* Female connector with solder pins 4.5 mm (without special contacts)* Female connector with press-in pins 4.5 mm (without special contacts)* Female connector with press-in pins 13 mm (without special contacts)* No. of contacts Contact arrangement 3 2 1 09 03 278 6864 09 03 478 6864b) 78 + 2 60 + 4 09 03 260 6864 42 + 6 09 03 242 6864 24 + 8 09 03 224 6864 78 + 2 09 03 278 6865 60 + 4 09 03 260 6865 42 + 6 09 03 242 6865 24 + 8 09 03 224 6865 Performance level 3 on request 78 + 2 09 03 278 6830 60 + 4 09 03 260 6830 42 + 6 09 03 242 6830 24 + 8 09 03 224 6830 78 + 2 09 03 278 6840 60 + 4 09 03 260 6840 42 + 6 09 03 242 6840 24 + 8 09 03 224 6840 with press-in terminations for rear interfacing Usage of HARTING shroud recommended: contacts for rear interfacing selectively gold plated (performance level 3) 01 . 46 Part number Performance levels according to IEC 60 603-2. Explanation chapter 00 * Pre-loaded with special contacts on request b) Connectors with snap-in clips see chapter 00 09 03 224 2830 09 03 260 2840