Gabellichtschranke Slotted Interrupter SFH 9500 Wesentliche Merkmale * Geeignet fur Oberflachenmontage (SMT) * Kompaktes Gehause * GaAs-IR-Sendediode (940 nm) * Si-Fototransistor mit Tageslichtsperrfilter * Mit Positionspin * Geeignet fur pick and place" Montage * Hohe Genauigkeit (Schlitzbreite 0,5 mm) * Groe Spaltbreite zwischen Sender und Empfanger (5 mm) * Hohe Stabilitat auf PCB durch groe Bauelementabmessung (6,8 mm) Features * Suitable for surface mounting (SMT) * Compact type * GaAs infrared emitter (940 nm) * Silicon phototransistor detector with daylight-cutoff filter * With positioning pin * Suitable for pick and place * High sensing accuracy (slit width: 0.5 mm) * Wide gap between emitter and detector (5 mm) * High stability on pcb due to large width of device (6.8 mm) Anwendungen Applications * Geschwindigkeitsuberwachung * Motorsteuerung * Uberwachung des Papiervorschubs in Druckern, Kopier- und Faxgeraten * Speicherlaufwerke * Steuerung des Druckkopfes in Druckern * Munzdetektion * Optoelektronische Schalter * Speed control * Motor control * Monitoring of paper feed in printers, copiers, facsimiles * Disk drives * Control of print head in printers * Coin detection * Optoelectronic switches 2000-01-01 1 OPTO SEMICONDUCTORS SFH 9500 Typ Type Bestellnummer Gehause Ordering Code Package SFH 9500 Q62702-P5066 Schwarzes Polykarbonat Plastikgehause, Anschlusse im 2.54-mm Raster, Senderseite durch Buchstaben E", Empfangerseite durch Buchstaben S" gekennzeichnet, Kathode / Transistoremitter durch schrage Kante gekennzeichnet Black polycarbonate plastic material housing, solder tabs 2.54-mm (1/10") spacing, emitter side marked with letter "E", sensor side marked with letter "S", cathode / emitter of transistor marked with edge at an angle Grenzwerte TA = 25 C Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Sperrspannung Reverse voltage VR 5 V Durchlastrom Forward current IF (DC) 60 mA Verlustleistung Power dissipation Ptot 100 mW Warmewiderstand Thermal resistance RthJA 280 K/W Sender (GaAs-Diode) Emitter (GaAs Diode) 2000-01-01 2 OPTO SEMICONDUCTORS SFH 9500 Grenzwerte TA = 25 C Maximum Ratings (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Kollektor-Emitter-Spannung Collector-emitter voltage VCE 30 V Kollektor-Emitter-Spannung, (t 2 min) Collector-emitter voltage VCE 70 Emitter-Kollektor-Spannung Emitter-collector voltage VEC 7 Kollektorstrom Collector current IC 50 mA Verlustleistung Total power dissipation Ptot 150 mW Warmewiderstand Thermal resistance RthJA 280 K/W Lagertemperatur Storage temperature range Tstg - 40 ... + 85 C Betriebstemperatur Operating temperature range Top - 40 ... + 85 Elektrostatische Entladung Electrostatic discharge ESD 2 Empfanger (Si-Fototransistor) Detector (Silicon Phototransistor) Gabellichtschranke Slotted Interrupter 2000-01-01 3 kV OPTO SEMICONDUCTORS SFH 9500 Kennwerte TA = 25 C Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der Strahlung Wavelength of peak emission peak 940 nm Durchlaspannung Forward voltage IF = 20 m, tp = 20 ms VF 1.2 ( 1.4) V Sperrstrom Reverse current VR = 5 V IR 0.01 ( 1) A Kapazitat Capacitance VR = 0 V, f = 1 MHz C0 16 pF Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 920 nm Spectr. Bereich der Fotoempfindlichkeit Spectral range of sensitivity S = 10% of Smax 840 ... 1080 nm Kapazitat Capacitance VCE = 0 V, f = 1 MHz, E = 0 CCE 6.5 pF Dunkelstrom, VCE = 20 V Dark current ICEO 2 ( 50) nA Sender (GaAs-Diode) Emitter (GaAs Diode) Empfanger (Si-Fototransistor) Detector (Silicon Phototransistor) 2000-01-01 4 OPTO SEMICONDUCTORS SFH 9500 Kennwerte TA = 25 C (cont'd) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Kollektor-Emitterstrom Collector-emitter current IF = 20 mA; VCE = 5 V ICE >1 mA Kollektor-Emitter-Sattigungsspannung Collector-emitter-saturation voltage IF = 20 mA; IC = 0.3 mA VCE sat 0.4 V Anstiegs- und Abfallzeit Rise and fall time VCC = 5 V, IC = 1 mA, RL = 1 k tr tf 13 17 s s Gabellichtschranke Slotted interrupter 2000-01-01 5 OPTO SEMICONDUCTORS SFH 9500 Forward Current IF = f (VF) Single pulse, tp = 20 s F Max. Permissible Forward Current IF = f (TA) OHF00367 10 4 mA OHF00372 90 Dark Current ICEO = f (TA) VCE = 20 V, E = 0 OHF00380 10 3 nA CEO F mA 10 3 70 10 10 2 R thJA = 280 K/W 2 60 50 10 1 10 1 40 10 0 30 10 0 20 10 -1 10 10 -2 0 0.5 1 1.5 2 2.5 3 V VF 4 0 0 20 40 60 80 C TA 120 10 -1 0 20 40 60 80 C 100 TA Total Power Dissipation for Emitter and Detector Ptot = f (TA) OHF00410 160 P tot Detector 140 120 Emitter 100 80 60 40 20 0 0 2000-01-01 20 40 60 80 C 100 TA 6 OPTO SEMICONDUCTORS SFH 9500 Mazeichnung Package Outlines Pin 3 6.2 6.0 Pin 2 Pin 1 6.9 6.7 5.1 4.9 13.65 13.25 5.2 4.9 6.1 5.9 (15.6) 0.6 0.4 2.54 2 1 Emitter 0.8 0.6 0.5 0.3 0...0.1 2.05 1.85 0.6 0.4 (2.2) 7.1 6.9 1.1 0.9 4.0 3.8 Optical axis 10.2 9.8 (8) Pin 4 Sensor Circuitry 3 4 GPX06988 Mae in mm, wenn nicht anders angegeben / Dimensions in mm, unless otherwise specified. 2000-01-01 7 OPTO SEMICONDUCTORS SFH 9500 Lothinweise Soldering Conditions Bauform Type SFH 9500 2000-01-01 Reflowlotung Reflow Soldering Peak Temp. of Soldering Zone Max. Time in Peak Zone 245 C ... 215 C Preheating 150 C 10 s ... 40 s approx. 1 min. 8 Tauch-, Schwalllotung Dip, Wave Soldering - OPTO SEMICONDUCTORS