Preliminary Specification Number : SP-UZ1GC-S W-LAN Module Data Sheet Cypress WLAN Chipset CYW43907 for 802.11a/b/g/n Tentative P/N : LBWA1UZ1GC-TEMP This Datasheet is preliminary version, and subject to change without notice. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 1 / 38 The revision history of the product specification Issued Date Revision Code Revision Page Apr.17, 2015 Changed Items First Issue Pin name #7, #78 and #113 Dimensions Land pattern Dimensions Terminal Configurations Absolute Maximum Rating, Operating Condition Land pattern A P5,6,7 P.4 P.17 Jun.12, 2015 B P.4 P.5 P.9 P.17 Sep.17, 2015 C P.4 Dimensions Oct.14, 2015 D P.4 P.18 Dimensions Land pattern Dec.25, 2015 E P.4 P.9 P.11 P.11 P.13,14,15,16,17 P.22 Feb.24, 2016 F P.3 P.10 P.12,13,14,15,16,17 Apr.30, 2015 Mar.8.2016 G Apr.1.2016 Jul.4.2016 Nov.25.2016 Dec.7.2016 Dec. 14. 2016 Feb. 7. 2017 H I J K L M Mar.3.2017 O Oct.30.2017 Sep.24.2018 P Q Dec.28.2018 R Jan.23.2020 S P5 P6 P13 P14~19 P21 P21 P11 P3 P20 P28 P21 Cover, P3, P9, P12 P21 P4 P21 P26 P4 Dimensions Power Supply Segments Absolute Maximum Rating Operating Condition RF Characteristics Tape and Reel Packing Dimensions Certification Information Operating Condition RF Characteristics structure pin layout DC characteristic VBAT condition Reference circuit Reference circuit 7. Operating Condition 4.Certification information 12. Land pattern (Top View) APPENDIX Reference circuit Change Reason Correction Follow JEDEC Pin Numbering Correction Addition Added solder bump Pin numbering Correction of Rev.C Addition Addition Addition Correction Update Update Addition Correction Update Update Update Addition Addition Addition Update Addition Improved Update Update Correction Addition Correction Changed IC Part Number Reference circuit Certification information Reference Circuit Soldering conditions Cleaning Certification Information Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Update Updated Updated Added Japan certification Updated Country Code Preliminary Specification Number : SP-UZ1GC-S 2 / 38 TABLE OF CONTENTS 1. Scope ..................................................................................................................................................... 3 2. Part Number ........................................................................................................................................... 3 3. Block Diagram ........................................................................................................................................ 3 4. Certification Information ......................................................................................................................... 4 4.1. Radio Certification ........................................................................................................................... 4 5. Dimensions, Marking and Terminal Configurations ............................................................................... 5 5.1. Dimensions ...................................................................................................................................... 5 5.2. Terminal Configurations ................................................................................................................... 7 6. Absolute Maximum Rating ................................................................................................................... 12 7. Operating Condition ............................................................................................................................. 12 8. External 32.768 kHz Low-Power Oscillator.......................................................................................... 12 9. Power Up Sequence ............................................................................................................................ 13 10. Digital I/O Requirements .................................................................................................................... 14 11. RF Characteristics .............................................................................................................................. 15 11.1. DC/RF Characteristics for IEEE802.11b...................................................................................... 15 11.2. DC/RF Characteristics for IEEE802.11g...................................................................................... 16 11.3. DC/RF Characteristics for IEEE802.11n...................................................................................... 17 11.4. DC/RF Characteristics for IEEE802.11a - 5GHz ......................................................................... 18 11.5. DC/RF Characteristics for IEEE802.11n - 5GHz ......................................................................... 19 12. Land pattern (Top View) ..................................................................................................................... 21 13. Reference Circuit................................................................................................................................ 22 14. Tape and Reel Packing ...................................................................................................................... 23 15. NOTICE .............................................................................................................................................. 26 15.1. Storage Conditions: ..................................................................................................................... 26 15.2. Handling Conditions: ................................................................................................................... 26 15.3. Standard PCB Design (Land Pattern and Dimensions): ............................................................. 26 15.4. Notice for Chip Placer:................................................................................................................. 26 15.5. Soldering Conditions: .................................................................................................................. 27 15.6. Cleaning: ...................................................................................................................................... 27 15.7. Operational Environment Conditions: ......................................................................................... 27 15.8. Input Power Capacity: ................................................................................................................. 27 16. PRECONDITION TO USE OUR PRODUCTS ................................................................................... 28 Please be aware that an important notice concerning availability, standard warranty and use in critical applications of Murata products and disclaimers thereto appears at the end of this specification sheet. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 3 / 38 1. Scope This specification is applied to the IEEE802.11a/b/g/n W-LAN complete module (WLAN smart module). - IC : Cypress/CYW43907 - Reference Clock : 37.4MHz reference clock is embedded. - RoHS : This module is compliant with the RoHS directive. 2. Part Number Sample Part Number LBWA1UZ1GC-TEMP Product Part Number LBWA1UZ1GC-958 3. Block Diagram VDD_VBAT USB_VDD_3V3 VDDIO VDDIO_AUDIO VDDIO_RMII VDDIO_SD 0 VDD_3V3_LDO VDD_3V3_IN Sleep Clock CYW43907 5G Tx DIPLEX SPI GPIO UART I2S MII/RMII I2C USB 5G Rx 2.4G Tx 2.4G Rx Matching Circuit Ref Clock 37.4MHz VDD1_35 SR_VLX1_35 2.2uH i. 2.2H Inductor (Murata, LQM2MPN2R2NG0) is needed to stabilize the output of internal switching regulator. It connects SR_VLX (Output of the internal switching regulator) to VDD1_35 (Input of internal 1.2V LDO) ii. 0 Resistor (100mW, 0603 Min case Size) is needed to connect VDD_3V3_LDO to (Output of Internal 3.3V LDO) to VDD_3V3_IN (Radio Supply of CYW43907) Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 4 / 38 4. Certification Information 4.1. Radio Certification USA FCC ID : VPYLB1GC Country Code: US/0 *Please follow user/installation manual of Appendix Canada IC ID : 772C-LB1GC Country Code: CA/0 *Please follow user/installation manual of Appendix Europe EN300328/301893 v2.1.1 conducted test report is prepared. Country Code: DE/0 Japan Japanese type certification is prepared. 001-P00975 Country Code: JP/0 *Please follow manual of Appendix The each country code are defined by Murata Blob/Nvram file. Please ask your contact person from Murata. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 5 / 38 5. Dimensions, Marking and Terminal Configurations 5.1. Dimensions < Top View > L (D) Model: Type1GC W (C) xxxxxxxxx (B) (A) < Bottom View > a3 b3 c 2 e 4 e 5 e 6 a4 e7 c3 D 3 A 3 0 A 44D 4 A 2 9 D 7 B 2 0 A 4 5 B 29D 8 e8 c4 e9 B 1 9 ( D 1 ( 1C) 9 ) ( C 1( 4D ) 1 2 ) B 3 0 e10 ( C 8 ) ( C 7 ) ( E 6 ) e3 a5 ( C 1 5 ) ( E 1 2 ) ( E 7 ) e11 ( C 1 6 ) ( E 1 ) c5 a2 ( C 1( )D 9 ) ( D 1( 0C) 6 ) B 1 1 D 6 B 1 0 ( A 1 6 e2 c1 b2 B 1D 5 D 2 A 1 5 < Side View > e12 ( B 3 8 A 5 8 A 1 D 1 e1 a1 b1 T T1 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 6 / 38 Mark L T a1 a4 b1 c1 c4 e1 e4 e7 e10 Dimensions 10.0 +/- 0.2 1.20 max. 0.25 +/- 0.1 0.25 +/- 0.1 0.395 +/- 0.2 0.55+/- 0.1 0.55+/- 0.1 0.31 +/- 0.1 0.932 +/- 0.1 0.882 +/- 0.1 0.31 +/- 0.1 Mark W T1 a2 a5 b2 c2 c5 e2 e5 e8 e11 Dimensions 10.0 +/- 0.2 0.07 typ. 0.25 +/- 0.1 0.25 +/- 0.1 0.293 +/- 0.2 0.55+/- 0.1 0.55+/- 0.1 0.392 +/- 0.1 0.31 +/- 0.1 0.858 +/- 0.1 0.45 +/- 0.1 Mark Dimensions a3 0.25 +/- 0.1 b3 c3 0.313 +/- 0.2 0.55+/- 0.1 e3 e6 e9 e12 0.31 +/- 0.1 0.25 +/- 0.1 0.384 +/- 0.1 0.974+/- 0.1 (unit : mm) Marking Marking (A) (B) (C) (D) Meaning Pin 1 Marking Murata Logo Inspection Number Module Type Structure Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 7 / 38 5.2. Terminal Configurations Pin Layout < Top View > D4A44 A30D3 A45 A29 B20D7 D8B29 B30 (D12)(C14) (C9)(D11) (C15) B19 (C8) (E12) (E7) (E1) (E6) (C16) (C7) (D9) (C1) (C6)(D10) (B38 B11 D5B1 B10D6 (A16 A58 D1A1 A15D2 Pin# Terminal Name Pin# Terminal Name Pin# Terminal Name D1 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 D2 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 A27 A28 A29 D3 SFLASH_MISO_3 SFLASH_CLK SFLASH_MOSI_0 SFLASH_MISO_2 SFLASH_CSN GND RF_ANT0 GND GPIO_7_WCPU_BOOT_MODE SPI_0_MOSI SPI_0_CS SPI_0_CLK SPI_0_MISO MII_RMII_TXEN MII_RXDV_RMII_CRS_DV MII_RMII_MDC MII_RMII_TXD0 MII_RMII_RXD0 MII_TXC_RMII_REF_CLK MII_RMII_RXD1 MII_RMII_TXD1 MII_RMII_MDIO ANT1_DIV_RF_SW_CTRL_5_DAP_CLK_SEL VDD_3V3_IN HIB_XTAL_IN HIB_XTAL_OUT ANT0_DIV_RF_SW_CTRL_4 PWM_3 PWM_2 USB2_DN USB2_DP GND A44 D4 A45 A46 A47 A48 A49 A50 A51 A52 A53 A54 A55 A56 A57 A58 D5 B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 D6 B11 B12 B13 B14 B28 B29 D8 B30 B31 B32 B33 B34 B35 B36 B37 B38 D9 C1 C2 C3 C4 C5 C6 D10 C7 C8 D11 C9 C10 C11 C12 C13 C14 D12 C15 C16 GPIO_13_SDIO_MODE GND GPIO_14 SPI_1_MOSI SPI_1_MISO SPI_1_CLK SPI_1_CS GND I2S0_SCK_BCLK I2S0_MCK I2S1_SD_OUT I2S1_SD_IN GND I2C_1_SDA GPIO_6_JTAG_TRST_L GPIO_4_JTAG_TDI GPIO_11_ACPU_BOOT_MODE HIB_REG_ON_IN HIB_LPO_SEL GND RF_SW_CTRL_9_HIB_LPO_SEL_UART2_TX GND GND PWM_1 PWM_0 GPIO_0 VDDIO_SD GPIO_2_JTAG_TCK GPIO_12 GND GPIO_9_USB_SEL GPIO_8_TAP_SEL A30 GPIO_1_GSPI_MODE B15 E1 GND A31 A32 A33 A34 A35 A36 A37 A38 A39 A40 A41 A42 A43 PWM_4 USB2_HOST_DEV_SEL GND USB_VDD_3V3 VDD_3V3_IN_2 GND VDDIO_AUDIO GND VDD_3V3_LDO GND VDD1_35 GND VDD_VBAT B16 B17 B18 B19 D7 B20 B21 B22 B23 B24 B25 B26 B27 SR_VLX1_35 GND GPIO_10 I2C_0_SDA I2C_0_SCL I2S0_SD_OUT I2S1_WS_LRCLK I2S0_SD_IN I2S0_WS_LRCLK UART0_RXD_IN UART0_RTS_OUT UART0_CTS_IN UART0_TXD_OUT VDDIO VDDIO_RMII SFLASH_MISO_1 I2S1_MCK I2S1_SCK_BCLK I2C_1_SCL GND GPIO_5_JTAG_TDO MII_RXD2 MII_RXD3 MII_COL MII_RXC MII_CRS MII_TXD2 MII_TXD3 GND RESET_N HIB_WAKE RF_SW_CTRL_8_UART2_RX RF_SW_CTRL_7_RSRC_INIT_ MODE_UART1_TX_OUT RF_GPAIO_OUT JTAG_SEL RF_SW_CTRL_6_UART1_RX_IN GPIO_16 PWM_5 GPIO_3_JTAG_TMS SDIO_DATA2 SDIO_DATA1 SDIO_DATA0 SDIO_CMD SDIO_CLK GPIO_15 SDIO_DATA3 E2 E3 E4 E5 E6 E7 E8 E9 E10 E11 E12 GND GND GND GND GND GND GND GND GND GND GND Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 8 / 38 SN Pin# Name Type Description 1 D1 SFLASH_MISO_3 I/O Flash data bit 4 2 A1 SFLASH_CLK O Flash clock 3 A2 SFLASH_MOSI_0 I/O Flash data bit 1 4 A3 SFLASH_MISO_2 I/O Flash data bit 3 5 A4 SFLASH_CSN O Flash slave select 6 A5 GND GND 7 A6 RF_ANT0 I/O 8 A7 GND GND 9 A8 GPIO_7_WCPU_BOOT_MODE I/O Boot from SoC SROM or SOC SRAM 10 A9 SPI_0_MOSI O SPI data master out 11 A10 SPI_0_CS O SPI slave select 12 A11 SPI_0_CLK O SPI clock 13 A12 SPI_0_MISO I SPI data master in 14 A13 MII_RMII_TXEN O MII/RMII Transmit Enable 15 A14 MII_RXDV_RMII_CRS_DV I Receive Data Valid 16 A15 MII_RMII_MDC O Management Data Clock 17 D2 MII_RMII_TXD0 O MII/RMII Transmit Data Output 18 A16 MII_RMII_RXD0 I MII/RMII Receive Data Input 19 A17 MII_TXC_RMII_REF_CLK I Transmit Clock 20 A18 MII_RMII_RXD1 I MII/RMII Receive Data Input 21 A19 MII_RMII_TXD1 O MII/RMII Transmit Data Output 22 A20 I/O Management Data I/O 23 A21 O ANT1 Diversity RF switch control 24 A22 MII_RMII_MDIO ANT1_DIV_RF_SW_CTRL_5_D AP_CLK_SEL VDD_3V3_IN PWR 3.3V input 25 A23 HIB_XTAL_IN I XTAL input for hibernation block 26 A24 HIB_XTAL_OUT O XTAL output for hibernation block 27 A25 ANT0_DIV_RF_SW_CTRL_4 O ANT0 Diversity RF switch control 28 A26 PWM_3 O Pulse width modulation bit 3 29 A27 PWM_2 O Pulse width modulation bit 2 30 A28 USB2_DN I/O USB Data 31 A29 USB2_DP I/O USB Data 32 D3 GND GND 33 A30 GPIO_1_GSPI_MODE I/O Enable gSPI interface 34 A31 PWM_4 O Pulse width modulation bit 4 35 A32 USB2_HOST_DEV_SEL I USB HOST/DEV select 36 A33 GND GND 37 A34 USB_VDD_3V3 PWR 3.3V supply for USB 38 A35 VDD_3V3_IN_2 PWR 3.3V input 39 A36 GND GND 40 A37 VDDIO_AUDIO PWR 41 A38 GND GND 42 A39 VDD_3V3_LDO PWR Antenna port 0 I/O supply for audio 3.3V output of internal LDO Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 9 / 38 43 A40 GND GND 44 A41 VDD1_35 PWR 45 A42 GND GND 46 A43 VDD_VBAT PWR VBAT input 47 A44 SR_VLX1_35 PWR PMU CBUCK Switching Regulator Out 48 D4 GND GND 49 A45 GPIO_10 I/O Programmable GPIO pin 50 A46 I2C_0_SDA I/O BSC serial data 51 A47 I2C_0_SCL O BSC master clock 52 A48 I2S0_SD_OUT O I2S data output 53 A49 I2S1_WS_LRCLK I/O LR clock 54 A50 I2S0_SD_IN I I2S data input 55 A51 I2S0_WS_LRCLK I/O LR clock 56 A52 UART0_RXD_IN I UART serial input 57 A53 UART0_RTS_OUT O UART request-to-send 58 A54 UART0_CTS_IN I UART clear-to-send 59 A55 UART0_TXD_OUT O UART serial output 60 A56 VDDIO PWR Power I/O supply 61 A57 VDDIO_RMII PWR I/O supply for RMII 62 A58 SFLASH_MISO_1 I/O Flash data bit 2 63 D5 I2S1_MCK I/O I2S Master Clock 64 B1 I2S1_SCK_BCLK I/O S clock 65 B2 I2C_1_SCL O BSC master clock 66 B3 GND GND 67 B4 GPIO_5_JTAG_TDO I/O JTAG/ Programmable GPIO pin 68 B5 MII_RXD2 I MII Receive Data Input 69 B6 MII_RXD3 I MII Receive Data Input 70 B7 MII_COL I Collision Detect 71 B8 MII_RXC I MII Receive Clock 72 B9 MII_CRS I MII carrier Sense 73 B10 MII_TXD2 O MII Transmit Data Output 74 D6 MII_TXD3 O MII Transmit Data Output 75 B11 GND GND 76 B12 RESET_N I Reset 77 B13 HIB_WAKE I Wake up chip from hibernation mode 78 B14 I/O RF switch control/UART_RX 79 B15 I/O RF switch control/UART_TX 80 B16 RF_SW_CTRL_8_UART2_RX RF_SW_CTRL_7_RSRC_INIT_ MODE_UART1_TX_OUT RF_GPAIO_OUT I/O Analog GPIO 81 B17 I JTAG enable 82 B18 I RF switch control/UART_RX 83 B19 JTAG_SEL RF_SW_CTRL_6_UART1_RX_I N GPIO_16 I/O Programmable GPIO pin 84 D7 PWM_5 O Pulse width modulation bit 5 85 B20 GPIO_3_JTAG_TMS I/O JTAG/ Programmable GPIO pin Input to internal PMU LDO Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 10 / 38 86 B21 SDIO_DATA2 I/O SDIO data line 2 87 B22 SDIO_DATA1 I/O SDIO data line 1 88 B23 SDIO_DATA0 I/O SDIO data line 0 89 B24 SDIO_CMD I/O SDIO command line 90 B25 SDIO_CLK I/O SDIO clock 91 B26 GPIO_15 I/O Programmable GPIO pin 92 B27 SDIO_DATA3 I/O 93 B28 GPIO_13_SDIO_MODE I/O SDIO data line 3 Programmable GPIO pin/SDIO mode select 94 B29 GND GND 95 D8 GPIO_14 I/O Programmable GPIO pin 96 B30 SPI_1_MOSI O SPI data master out 97 B31 SPI_1_MISO I SPI data master in 98 B32 SPI_1_CLK O SPI clock 99 B33 SPI_1_CS O SPI slave select 100 B34 GND GND 101 B35 I2S0_SCK_BCLK I/O Bit clock 102 B36 I2S0_MCK I/O M clock 103 B37 I2S1_SD_OUT O I2S data output 104 B38 I2S1_SD_IN I I2S data input 105 D9 GND GND 106 C1 I2C_1_SDA I/O BSC serial data 107 C2 GPIO_6_JTAG_TRST_L I/O Programmable GPIO pin/JTAG 108 C3 GPIO_4_JTAG_TDI I/O 109 C4 GPIO_11_ACPU_BOOT_MODE I/O 110 C5 HIB_REG_ON_IN I 111 C6 HIB_LPO_SEL I Programmable GPIO pin/JTAG Boot from tightly coupled memory (TCM) ROM or TCM RAM Used by the hibernation block to power up or power down the internal CYW43907 regulators Select precise or coarse 32 kHz clock 112 D10 GND 113 C7 114 C8 GND RF_SW_CTRL_9_HIB_LPO_SE L_UART2_TX GND 115 D11 GND GND 116 C9 PWM_1 O Pulse width modulation bit 1 117 C10 PWM_0 O Pulse width modulation bit 0 118 C11 GPIO_0 I/O Programmable GPIO pin 119 C12 VDDIO_SD PWR I/O supply for SDIO 120 C13 GPIO_2_JTAG_TCK I/O Programmable GPIO/JTAG 121 C14 GPIO_12 I/O Programmable GPIO pin 122 D12 GND GND 123 C15 GPIO_9_USB_SEL I/O Select USB Mode 124 C16 GPIO_8_TAP_SEL I/O Programmable GPIO/ JTAG strap 125 E1 GND GND 126 E2 GND GND I/O RF switch control/UART_TX GND Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 11 / 38 127 E3 GND GND 128 E4 GND GND 129 E5 GND GND 130 E6 GND GND 131 E7 GND GND 132 E8 GND GND 133 E9 GND GND 134 E10 GND GND 135 E11 GND GND 136 E12 GND GND Power Supply Segments VDDIO VDDIO_AUDIO VDD_3V3_IN_2 VDDIO_RMII GPIO_0, GPIO_1_GSPI_MODE, GPIO_2_JTAG_TCK, GPIO_3_JTAG_TMS, GPIO_4_JTAG_TDI, GPIO_5_JTAG_TDO, GPIO_6_JTAG_TRST_L, GPIO_7_WCPU_BOOT_MODE, GPIO_8_TAP_SEL, GPIO_9_USB_HSIC_SEL, GPIO_10, GPIO_11_ACPU_BOOT_MODE, GPIO_12, GPIO_13_SDIO_MODE, GPIO_14, GPIO_15_HOST_VTRIM, GPIO_16, I2C_0_SCL, I2C_0_SDA, I2C_1_SCL, I2C_1_SDA, JTAG_SEL, PWM_0, PWM_1, PWM_2, PWM_3, PWM_4, PWM_5, SFLASH_CLK, SFLASH_CSN, SFLASH_MOSI_0, SFLASH_MISO_1, SFLASH_MISO_2, SFLASH_MISO_3, SPI_0_CLK, SPI_0_CS, SPI_0_MISO, SPI_0_MOSI, SPI_1_CLK, SPI_1_CS, SPI_1_MISO, SPI_1_MOSI, RESET_N, UART0_CTS_IN, UART0_RTS_OUT, UART0_RXD_IN, UART0_TXD_OUT, USB2_HOST_DEV_SEL I2S0_WS_LRCLK, I2S1_WS_LRCLK, I2S0_MCK, I2S1_MCK, I2S0_SCK_BCLK, I2S1_SCK_BCLK, I2S0_SD_IN, I2S1_SD_IN, I2S0_SD_OUT, I2S1_SD_OUT TX_5G_RF_SW_CTRL_2, RX_5G_RF_SW_CTRL_3, ANT0_DIV_RF_SW_CTRL_4, ANT1_DIV_RF_SW_CTRL_5_DAP_CLK_SEL, RF_SW_CTRL_6_UART1_RX_IN, RF_SW_CTRL_7_RSRC_INIT_MODE_UART1_TX_OUT, RF_SW_CTRL_8_UART2_RX, RF_SW_CTRL_9_HIB_LPO_SEL_UART2_TX MII_COL, MII_CRS, MII_RXC, MII_RMII_RXD0, MII_RMII_RXD1, MII_RXD2, MII_RXD3, MII_RXDV_RMII_CRS_DV, MII_TXC_RMII_REF_CLK, MII_RMII_TXD0, MII_RMII_TXD1, MII_TXD2, MII_TXD3, MII_RMII_TXEN, MII_RMII_MDC, MII_RMII_MDIO Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 12 / 38 6. Absolute Maximum Rating Storage Temperature Supply Voltage VDD_VBAT VDD1_35 USB_VDD_3V3 VDDIO VDDIO_AUDIO VDDIO_RMII VDDIO_SD min. -40 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 max. 85 5.5 1.5 3.9 3.9 3.9 3.9 3.9 unit deg.C V V V V V V V Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. No damage assuming only one parameter is set at limit at a time with all other parameters is set within operating condition. 7. Operating Condition min. typ. max. unit Operating Temperature Range(*1) -30 85 deg.C Specification Temperature Range -20 70 deg.C VDD_VBAT 3.13 4.8 V VDD1_35 1.3 1.35 1.5 V USB_VDD_3V3 2.97 3.3 3.63 V Supply Voltage VDDIO 2.97 3.3 3.63 V VDDIO_AUDIO 1.71 3.63 V VDDIO_RMII 1.71 3.63 V VDDIO_SD 1.71 3.63 V [Note] All RF characteristics in this datasheet are defined by Specification Temperature Range. Default configuration of VDD_3V3_IN and VDD_3V3_IN2 is to connect with VDD_3V3_LDO. Specifications require derating at extreme temperatures. 8. External 32.768 kHz Low-Power Oscillator This module uses a secondary low frequency clock for low-power mode timing. Parameter Normal Input Frequency Frequency Accuracy Duty Cycle Input Signal Amplitude Signal Type Input Impedance1) Clock Jitter (During Initial Start-up) 1) When power is applied or switched off. LPO Clock 32.768 +/-200 30 - 70 200 - 3300 Square-wave, or Sine-wave >100k <5 < 10,000 Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. unit kHz ppm % mVp-p Ohm pF ppm Preliminary Specification Number : SP-UZ1GC-S 13 / 38 9. Power Up Sequence Following timing diagram explain module power up sequence. 32.768kHz Sleep Clock VBAT VDDIO ~2 Sleep Cycles HIB_REG_ON_IN *Power down sequence is opposite sequence of power up. Note: The CYW43907 has an internal power-on-reset (POR) circuit. The device will be held in reset for a maximum of 110 ms after VDDC (internal LDO output) and VDDIO have both passed the POR threshold. Note: The 10% - 90% VBAT rise time should not be faster than 40 microseconds. VBAT should be up before or at the same time as VDDIO. VDDIO should not be present first or be held high before VBAT is high. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 14 / 38 10. Digital I/O Requirements SDIO Interface I/O Pins For VDDIO_SD=1.8V: Input high voltage Input low voltage Output high voltage@2mA Output low voltage@2mA For VDDIO_SD=3.3V: Input high voltage Input low voltage Output high voltage@2mA Output low voltage@2mA Other Digital I/O Pins For VDDIO_SD=1.8V: Input high voltage Input low voltage Output high voltage@2mA Output low voltage@2mA For VDDIO_SD=3.3V: Input high voltage Input low voltage Output high voltage@2mA Output low voltage@2mA RF Switch control Output Pins For VDD_3V3_IN_2=3.3V: Output high voltage@2mA Output low voltage@2mA Input capacitance GPIO, UART, and JTAG Interfaces Parameter For VDDIO=3.3V: Input high voltage Input low voltage Output high voltage@2mA Output low voltage@2mA Sym min. typ. max. unit VIH VIL VOH VOL 1.27 1.40 - - 0.58 0.45 V V V V VIH VIL VOH VOL Sym 0.625xVDDIO 0.75xVDDIO min. typ. 0.25xVDDIO 0.125xVDDIO max. V V V V unit VIH VIL VOH VOL 0.65xVDDIO VDDIO-0.45 - - 0.35xVDDIO 0.45 V V V V VIH VIL VOH VOL Sym 2.00 VDDIO-0.4 min. typ. 0.80 0.40 max. V V V V unit VOH VOL CIN VDDIO-0.4 - - 0.4 5 V V pF Sym min. typ. max. unit VIH VIL VOH VOL 2.0 -0.5 2.4 - - VDDIO+0.5 0.8 0.4 V V V V Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 15 / 38 11. RF Characteristics 11.1. DC/RF Characteristics for IEEE802.11b Conditions: 25deg.C, VBAT=3.3V (11Mbps mode unless otherwise specified.) Items Contents Specification IEEE802.11b Mode CCK Frequency 2400 - 2483.5MHz Output Power setting 17.0dBm - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 380 480 *1*2 2) Rx mode 100 150 - Tx Characteristics *1min. Typ. max. 2. Output Power 15.0 17.0 19.0 3. Spectrum Mask Margin 1) 1st side lobes(-30dBr) 0 10 2) 2nd side lobes(-50dBr) 0 10 4. Power-on and Power-down ramp 2.0 5. RF Carrier Suppression 15 6. Modulation Accuracy (EVM) 23 35 7.Frequency tolerance -20 -5 20 8. Out band Spurious Emissions 1) 30MHz to 1GHz (BW=100kHz) -36 2) 1GHz to 12.75GHz (BW=1MHz) -30 3) 1.8GHz to 1.9GHz (BW=1MHz) -47 4) 5.15GHz to 5.3GHz (BW=1MHz) -47 - Rx Characteristics min. typ. max. 9. Minimum Input Level Sensitivity -89 -76 (FER < 8%) 10. Maximum Input Level (FER < 8%) -10 11. Adjacent Channel Rejection 35 (FER < 8%) *1: Defined when output power setting is 17dBm at Murata module antenna pad *2: Datarate is 1Mbps unit mA mA unit dBm dB dB sec dB % ppm dBm dBm dBm dBm unit dBm dBm dB Note: The above mentioned values have been obtained according to our own measuring methods and may very depend on the circuit, in which the component is actually incorporated. Therefore, you are kindly requested to test the performance of the component actually in your set. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 16 / 38 11.2. DC/RF Characteristics for IEEE802.11g Conditions: 25deg.C, VBAT=3.3V (54Mbps mode unless otherwise specified.) Items Contents Specification IEEE802.11g Mode OFDM Frequency 2400 - 2483.5MHz Output Power setting 13.0dBm - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 320 420 *1*2 2) Rx mode 100 150 - Tx Characteristics*1 min. typ. max. 2. Output Power 11.0 13.0 15.0 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0~ -20dBr) 0 13 2) 11MHz to 20MHz (-20~ -28dBr) 0 13 3) 20MHz to 30MHz (-28~ -40dBr) 0 14 4) 30MHz to 33MHz (-40dBr) 0 14 4. Constellation Error (EVM) -36 -25 5.Frequency tolerance -20 -5 20 6. Out band Spurious Emissions 1) 30MHz to 1GHz (BW=100kHz) -36 2) 1GHz to 12.75GHz (BW=1MHz) -30 3) 1.8GHz to 1.9GHz (BW=1MHz) -47 4) 5.15GHz to 5.3GHz (BW=1MHz) -47 - Rx Characteristics min. typ. max. 7. Minimum Input Level Sensitivity -77 -65 (PER < 10%) 8. Maximum Input Level (PER < 10%) -20 9. Adjacent Channel Rejection -1 (PER < 10%) *1: Defined when output power setting is 13dBm at Murata module antenna pad *2: Datarate is 6Mbps unit mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dBm dB Note: The above mentioned values have been obtained according to our own measuring methods and may very depend on the circuit, in which the component is actually incorporated. Therefore, you are kindly requested to test the performance of the component actually in your set. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 17 / 38 11.3. DC/RF Characteristics for IEEE802.11n Conditions: 25deg.C, VBAT=3.3V (65Mbps(MCS7) mode unless otherwise specified.) Items Contents Specification IEEE802.11n Mode OFDM Frequency 2400 - 2483.5MHz Output Power setting 12.0dBm - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 310 410 *1*2 2) Rx mode 100 150 - Tx Characteristics min. typ. max. 2. Output Power 10.0 12.0 14.0 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0 ~ -20dBr) 0 13 2) 11MHz to 20MHz (-20 ~ -28dBr) 0 13 3) 20MHz to 30MHz (-28 ~ -45dBr) 0 9 4) 30MHz to 33MHz (-45dBr) 0 9 4. Constellation Error (EVM) -38 -27 5.Frequency tolerance -20 -5 20 6. Out band Spurious Emissions 1) 30MHz to 1GHz -36 2) 1GHz to 12.75GHz -30 3) 1.8GHz to 1.9GHz -47 4) 5.15GHz to 5.3GHz -47 - Rx Characteristics min. typ. max. 7. Minimum Input Level Sensitivity 1) 65Mbps (PER < 10%) -74 -64 8. Maximum Input Level (PER < 10%) -20 9. Adjacent Channel Rejection -2 (PER < 10%) *1: Defined when output power setting is 12dBm at Murata module antenna pad *2: Datarate is 6.5Mbps(MCS0) unit mA mA unit dBm dB dB dB dB dB ppm dBm dBm dBm dBm unit dBm dBm dB Note: The above mentioned values have been obtained according to our own measuring methods and may very depend on the circuit, in which the component is actually incorporated. Therefore, you are kindly requested to test the performance of the component actually in your set. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 18 / 38 11.4. DC/RF Characteristics for IEEE802.11a - 5GHz Conditions : 25deg.C, VBAT =3.3V. (54Mbps mode unless otherwise specified.) Items Contents Specification IEEE802.11a Mode OFDM Frequency 5180 - 5825MHz Output Power setting 13.0dBm - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 330 430 *1*2 2) Rx mode 100 150 - Tx Characteristics*1 min. typ. max. 2. Output Power 11.0 13.0 15.0 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0~ -20dBr) 0 12 2) 11MHz to 20MHz (-20~ -28dBr) 0 13 3) 20MHz to 30MHz (-28~ -40dBr) 0 12 4) 30MHz to 33MHz (-40dBr) 0 11 4. Constellation Error (EVM) -34 -25 5.Frequency tolerance -20 0 20 - Rx Characteristics min. typ. max. 6. Minimum Input Level Sensitivity -74 -65 (PER < 10%) 7. Maximum Input Level (PER < 10%) -30 8. Adjacent Channel Rejection -1 (PER < 10%) *1: Defined when output power setting is 13dBm at Murata module antenna pad *2: Datarate is 6Mbps unit mA mA unit dBm dB dB dB dB dB ppm unit dBm dBm dB Note The above mentioned values have been obtained according to our own measuring methods and may very depend on the circuit, in which the component is actually incorporated. Therefore, you are kindly requested to test the performance of the component actually in your set. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 19 / 38 11.5. DC/RF Characteristics for IEEE802.11n - 5GHz Conditions : 25deg.C, VBAT =3.3V. (65Mbps (MCS7) mode unless otherwise specified. ) Items Contents Specification IEEE802.11n Mode OFDM Frequency 5180 - 5825MHz Output Power setting 12.0dBm - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 320 420 *1*2 2) Rx mode 100 150 - Tx Characteristics*1 min. typ. max. 2. Output Power 10.0 12.0 14.0 3. Spectrum Mask Margin 1) 9MHz to 11MHz (0~ -20dBr) 0 12 2) 11MHz to 20MHz (-20~ -28dBr) 0 13 3) 20MHz to 30MHz (-28~ -45dBr) 0 12 4) 30MHz to 33MHz (-45dBr) 0 11 4. Constellation Error (EVM) -36 -27 5.Frequency tolerance -20 0 20 - Rx Characteristics min. typ. max. 6. Minimum Input Level Sensitivity -73 -64 (PER < 10%) 7. Maximum Input Level (PER < 10%) -30 8. Adjacent Channel Rejection -1 (PER < 10%) *1: Defined when output power setting is 12dBm at Murata module antenna pad *2: Datarate is 6.5Mbps(MCS0) unit mA mA unit dBm dB dB dB dB dB ppm unit dBm dBm dB Note: The above mentioned values have been obtained according to our own measuring methods and may very depend on the circuit, in which the component is actually incorporated. Therefore, you are kindly requested to test the performance of the component actually in your set. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 20 / 38 Conditions:25deg.C, VBAT=3.3V (135Mbps(MCS7_HT40) mode unless otherwise specified.) Items Contents Specification IEEE802.11n Mode OFDM Frequency 5190 - 5795MHz Output Power setting 12.0dBm - DC Characteristics min. typ. max. 1. DC current 1) Tx mode (1024byte, 20usec interval) 330 430 *1*2 2) Rx mode 100 150 - Tx Characteristics*1 min. typ. max. 2. Output Power 10.0 12.0 14.0 3. Spectrum Mask Margin 1) 19MHz to 21MHz (0~ -20dBr) 0 18 2) 21MHz to 40MHz (-20~ -28dBr) 0 10 3) 40MHz to 60MHz (-28~ -45dBr) 0 9 4) 60MHz to 80MHz (-45dBr) 0 9 4. Constellation Error (EVM) -33 -27 5.Frequency tolerance -20 0 20 - Rx Characteristics min. typ. max. 6. Minimum Input Level Sensitivity -69 -61 (PER < 10%) *1: Defined when output power setting is 12dBm at Murata module antenna pad *2: Datarate is 13.5Mbps(MCS0) unit mA mA unit dBm dB dB dB dB dB ppm unit dBm Note: The above mentioned values have been obtained according to our own measuring methods and may very depend on the circuit, in which the component is actually incorporated. Therefore, you are kindly requested to test the performance of the component actually in your set. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 21 / 38 12. Land pattern (Top View) 5.00 4.605 Unit : mm 4.355 4.045 3.795 3.485 3.235 2.925 2.675 2.365 2.115 1.805 1.555 1.245 0.995 0.685 0.435 4.687 4.137 3.307 2.757 0.125 0.155 0.125 5.00 5.00 4.707 4.157 3.765 3.515 3.205 2.955 2.645 2.395 2.085 1.835 1.525 1.275 0.965 0.715 0.405 0.225 0.435 0.775 0.685 1.225 0.995 1.775 1.245 1.555 1.805 2.115 2.365 2.749 3.299 5.00 0.125 0.155 0.375 0.405 0.625 0.715 0.875 1.525 1.835 2.085 2.395 1.125 1.375 1.625 1.875 PADSTACK INFORMATION 5.00 2.645 0.350 0.965 1.275 0.650 SOLDERMASK (SOLDER REGIST) 2.955 3.205 0.250 0.250 5.00 0.550 0.550 PIN SOLDER PASTE (STENCIL) Note: For PINs on the board that have a copper pour (flood) associated with it, usually the case with Ground PINs, please assure that the Land Pattern (PCB Footprint) for these PINs becomes Solder Mask Defined (SMD). In other words, the SOLDERMASK (SOLDER REGIST) for these Ground (GND) pins should be 0.550 mm x 0.250 mm (basically SODLERMASK (SOLDER REGIST) becomes same size as the PIN). Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. 3 A B RF_ANT0 HIB_XTAL_OUT C D E HIB_XTAL_IN F G Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. H SFASH_MOSI_3 SFASH_MOSI_2 SFASH_CSN SFASH_CLK 7 3 1 6 5 HS_GND GND SO/SIO1 VCC H 4 2 8 GND SFASH_MOSI_1 GND 0.1uF 10K VDDIO 10K 10K 10K GND RESET_N JTAG_SEL 1 I GPIO_16 GPIO_15 GPIO_14 GPIO_12 GPIO_10 GPIO_0 GPIO_6_JTAG_TRST_L GPIO_5_JTAG_TDO GPIO_4_JTAG_TDI GPIO_3_JTAG_TMS GPIO_2_JTAG_TCK *3 PWM_5 PWM_4 PWM_3 PWM_2 PWM_1 B19 B26 D8 C14 A45 C11 B28 C4 C15 A8 A30 C2 B4 C3 B20 C13 C16 B17 B12 D7 A31 A26 A27 C9 C10 A32 A28 A29 B33 GPIO_16 GPIO_15 GPIO_14 GPIO_12 GPIO_10 GPIO_0 GPIO_13_SDIO_MODE GPIO_11_ACPU_BOOT_MODE GPIO_9_USB_SEL GPIO_7_WCPU_BOOT_MODE GPIO_1_GSPI_MODE GPIO_6_JTAG_TRST_L GPIO_5_JTAG_TDO GPIO_4_JTAG_TDI GPIO_3_JTAG_TMS GPIO_2_JTAG_TCK GPIO_8_TAP_SEL JTAG_SEL RESET_L PWM_5 PWM_4 PWM_3 PWM_2 PWM_1 PWM_0 USB2_HOST_DEV_SEL USB2_DN USB2_DP SPI_1_CS SPI_1_MOSI SPI_1_MISO SPI_1_CLK I2S0_SCK_BCLK MII_CRS MII_COL MII_RXD3 MII_RXD2 MII_RMII_RXD1 MII_RMII_RXD0 MII_RXDV_RMII_CRS_DV MII_RXC MII_TXD3 MII_TXD2 MII_RMII_TXD1 MII_RMII_TXD0 MII_RMII_TXEN MII_TXC_RMII_REF_CLK MII_RMII_MDIO MII_RMII_MDC UART0_RTS_OUT UART0_CTS_IN UART0_TXD_OUT UART0_RXD_IN I2S_1_SCL I2C_1_SDA I2S_0_SCL I2C_0_SDA I2S1_SD_OUT I2S1_SD_IN I2S1_MCK I2S1_WS_LRCLK I2S1_SCK_BCLK I2S0_SD_OUT I2S0_SD_IN I2S0_MCK I2S0_WS_LRCLK B9 B7 B6 B5 A18 A16 A14 B8 D6 B10 A19 D2 A13 A17 A20 A15 A53 A54 A55 A52 B2 C1 A47 A46 B37 B38 D5 A49 B1 A48 A50 B36 A51 B35 SDIO_CLK MII_RMII_RXD3 MII_RMII_RXD2 MII_RMII_RXD1 MII_RMII_RXD0 MII_RXDV_RMII_CRS_DV MII_RMII_RXC MII_RMII_TXD3 MII_RMII_TXD2 MII_RMII_TXD1 MII_RMII_TXD0 MII_RMII_TXEN MII_TXC_RMII_REF_CLK MII_RMII_MDIO MII_RMII_MDC UART0_RTS_OUT UART0_CTS_IN UART0_TXD_OUT UART0_RXD_IN I2S1_SD_OUT I2S1_SD_IN I2S1_MCK I2S1_WS_LRCLK I2S1_SCK_BCLK I2S0_SD_OUT I2S0_SD_IN I2S0_MCK I2S0_WS_LRCLK I2S0_SCK_BCLK MII_CRS 4.7K 4.7K RF_SW_CTRL_9_HIB_LPO_SEL_UART2_TX RF_SW_CTRL_8_UART2_RX MII_COL 0.1uF GND 4.7K 4.7K VDDIO I2C_1_SCL I2C_1_SDA I2C_0_SCL I2C_0_SDA GND RF_SW_CTRL_7_RSRC_INIT_MODE_UART1_TX_OUT RF_SW_CTRL_6_UART1_RX_IN SDIO_DATA3 SDIO_DATA2 SDIO_DATA1 SDIO_DATA0 SDIO_CMD VDDIO_RMII 4.7uF GND 0.1uF H MX25L6433FZNI HLD_L/SIO3 WP_L/SIO2 CS_L SCLK SI/SIO0 VDDIO VDDIO 4.7K PWM_0 USB2_DN USB2_DP SPI_1_CS B30 B31 B32 LBWA1UZ1GC C7 B14 B15 B18 B27 B21 B22 B23 1uF GND VDDIO_AUDIO G SFASH_MOSI_0 GND GND SPI_1_CLK SPI_1_MOSI SPI_1_MISO SPI_0_CS SPI_0_MOSI SPI_0_MISO SPI_0_CLK RF_SW_CTRL_9_HIB_LPO_SEL_UART2_TX RF_SW_CTRL_8_UART2_RX RF_SW_CTRL_7_RSRC_INIT_MODE_UART1_TX_OUT RF_SW_CTRL_6_UART1_RX_IN SDIO_DATA3 SDIO_DATA2 SDIO_DATA1 SDIO_DATA0 B24 B25 A57 100pF GND USB_VDD_3V3 350mA, 490mOHM 1000ohm *1 GND 0.1uF F SFLASH GND GND DEPOP DEPOP 0 SPI_0_CS A9 GND_D3 A10 GND_D4 A12 GND_D9 DEPOP 0 SPI_0_CLK GND_D10 SPI_0_MOSI A11 SFLASH_MISO_3 SFLASH_MISO_2 GND_E6 SPI_0_MISO A3 GND_E7 D1 GND_E8 SFASH_MOSI_3 SFLASH_MISO_1 SFLASH_MOSI_0 SFLASH_CSN SFLASH_CLK HIB_WAKE GND_E9 SFASH_MOSI_2 A58 A2 A4 A1 B13 GND_E10 SFASH_MOSI_1 SFASH_MOSI_0 SFASH_SCN SFASH_CLK SDIO_CMD SDIO_CLK VDDIO_RMII A34 A37 GND DEPOP E 0 2 Antenna matching GND 4.7K GND_E11 GND 0.1uF GND_E12 PI-network attenuator 1M HIB_REG_ON_IN HIB_LPO_SEL HIB_XTAL_OUT HIB_XTAL_IN USB_VDD_3V3 VDDIO_AUDIO C12 0.1uF VDDIO_SD D DEPOP RF line GND 0 HIB_WAKE GND_A5 C5 7 GND HIB_LPO_SEL GND_A7 HIB_REG_ON_IN GND_A33 C6 A5 A24 A7 A23 A33 HIB_XTAL_IN A36 C HIB_XTAL_OUT A38 33k A40 4.7K A42 32.768KHZ B3 0 6 GND 2 RF_GPAIO_OUT B11 ANT1_DIV_RF_SW_CTRL_5_DAP_CLK_SEL B29 B16 B34 RF_GPAIO_OUT C8 ANT0_DIV_RF_SW_CTRL_4 D3 VDDIO_SD A56 3 A21 D4 A25 D9 RF_ANT0 D10 A6 D11 10MEG 8 RF_ANT0 D12 VDD_3V3_IN_2 E1 GND VDD_3V3 E2 VDD_3V3_IN E3 VDD_3V3_LDO E4 A35 E5 A22 E6 A39 E7 10uF 0 E8 VDD_3V3 E9 VDD1_35 5 VDDIO 4.7uF 1 A41 E10 SR_VLX1_35 E11 A44 VDD_VBAT GND B VDDIO VDD_3V3 9 2.2uH *2 A43 E12 GND 4 4.7uF VDD_VBAT VDDIO A HIB Xtal *1 :BLM15AX102SN1D *2 :LQM2MPN2R2NG0 *3 :PU(4.7kohm) : JTAG enable PD(4.7kohm) : JTAG disable Preliminary Specification Number : SP-UZ1GC-S 22 / 38 13. Reference Circuit I 1 2 3 4 GND_E5 GND_E4 GND_E3 GND_E2 GND_E1 GND_D12 GND_D11 5 GND_C8 GND_B34 GND_B29 GND_B11 GND_B3 GND_A42 GND_A40 6 GND_A38 GND_A36 7 8 9 0 1 2 3 Preliminary Specification Number : SP-UZ1GC-S 23 / 38 14. Tape and Reel Packing 2.00.1 4.00.1 1.5+0.1/-0.0 0.300.05 11.50.1 10.50.1 24.00.3/-0,1 1.750.10 (1) Dimensions of Tape (Plastic tape) 1.50.1/-0.0 16.00.1 10.50.1 1.7 max. (1.60.1) feeding direction The corner and ridge radiuses (R) of inside cavity are 0.3mm max. Cumulative tolerance of 10 pitches of the sprocket hole is +/-0.2mm Measuring of cavity positioning is based on cavity center in accordance with JIS/IES standard. (2) Dimensions of Reel 25.50.6 ( 330) 2.00.5 ( 100) 1) 2) 3) 130.2 30.5 max. (unit : mm) Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 24 / 38 (3) Taping Diagrams [1] Feeding Hole : As specified in (1) [2] Hole for chip : As specified in (1) [3] Cover tape : 62m in thickness [4] Base tape : As specified in (1) [3] [1] [2] [3] [4] Feeding Hole Feeding Direction Pin 1 Marking Chip (4) Leader and Tail tape Feeding direction Tail tape (No components) 40 to 200mm Components No components Leader tape (Cover tape alone) 150mm min. 250mm min. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 25 / 38 (5) The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. (6) The cover tape and base tape are not adhered at no components area for 250mm min. (7) Tear off strength against pulling of cover tape : 5N min. (8) Packaging unit : 1000pcs./ reel (9) material : Base tape : Plastic Real : Plastic Cover tape, cavity tape and reel are made the anti-static processing. (10) Peeling of force : 1.1N max. in the direction of peeling as shown below. 1.1 N max. 165 to 180 Cover tape Base tape (11) Packaging (Humidity proof Packing) Label Desiccant Humidity Indicator Label Anti-humidity Plastic Bag Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity indicator. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 26 / 38 15. NOTICE 15.1. Storage Conditions: Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35deg.C and humidity from 20 to 70%RH. (Packing materials, in particular, may be deformed at the temperature over 40deg.C.) - The product left more than 6months after reception, it needs to be confirmed the solderbility before used. - The product shall be stored in non corrosive gas (Cl2, NH3, SO2, Nox, etc.). - Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp object and dropping the product, shall not be applied in order not to damage the packing materials. This product is applicable to MSL3 (Based on JEDEC Standard J-STD-020) - After the packing opened, the product shall be stored at <30deg.C / <60%RH and the product shall be used within 168hours. - When the color of the indicator in the packing changed, the product shall be baked before soldering. Baking condition: 125+5/-0deg.C, 24hours, 1time The products shall be baked on the heat-resistant tray because the material (Base Tape, Reel Tape and Cover Tape) are not heat-resistant. 15.2. Handling Conditions: Be careful in handling or transporting products because excessive stress or mechanical shock may break products. Handle with care if products may have cracks or damages on their terminals, the characteristics of products may change. Do not touch products with bear hands that may result in poor solder ability and destroy by static electrical charge. 15.3. Standard PCB Design (Land Pattern and Dimensions): All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern should be provided between IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is as Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to verify the characteristics in the actual set. When using non-standard lands, contact Murata beforehand. 15.4. Notice for Chip Placer: When placing products on the PCB, products may be stressed and broken by uneven forces from a worn-out chucking locating claw or a suction nozzle. To prevent products from damages, be sure to follow the specifications for the maintenance of the chip placer being used. For the positioning of products on the PCB, be aware that mechanical chucking may damage products. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 27 / 38 15.5. Soldering Conditions: The recommendation conditions of soldering are as in the following figure. Soldering must be carried out by the above mentioned conditions to prevent products from damage. Set up the highest temperature of reflow within 260 C. Contact Murata before use if concerning other soldering conditions. Reflow soldering standard conditions(Example) Within 3s 240to 250 deg.C 220 deg.C Cooling down Slowly 180 deg.C 150 deg.C Pre-heating Within 120s Within 60s time(s) Please use the reflow within 2 times. Use rosin type flux or weakly active flux with a chlorine content of 0.2 wt % or less. 15.6. Cleaning: Since this Product is Moisture Sensitive, any cleaning is not recommended. If any cleaning process is done the customer is responsible for any issues or failures caused by the cleaning process. 15.7. Operational Environment Conditions: Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur. - In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.). - In an atmosphere containing combustible and volatile gases. - Dusty place. - Direct sunlight place. - Water splashing place. - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or excessive voltage while assembling and measuring. 15.8. Input Power Capacity: Products shall be used in the input power capacity as specified in this specifications. Inform Murata beforehand, in case that the components are used beyond such input power capacity range. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 28 / 38 16. PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS. - Aircraft equipment. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. -Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, breaking, reverse-engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. By signing on specification sheet or approval sheet, you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. When you are not able to return the signed version of specification sheet or approval sheet within 30 days from receiving date of specification sheet or approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by - the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the product to be sold by you, -deviation or lapse in function of engineering sample, -improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can't agree the above contents, you should inquire our sales. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 29 / 38 APPENDIX Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 30 / 38 Type1GC Installation Manual (FCC) FCC ID of this product is as follows. FCC ID:VPYLB1GC For OEM integration only - device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC on the product and in the Installation manual Notice. Contents 1.Theory of operation 2.Antenna 3.Notice 1. Theory of Operation Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: 20ppm End users cannot modify the software because F/W & driver are installed in device. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 31 / 38 2. Antenna Please refer to KDB 996369 Please perform the antenna design that followed the specifications of the antenna. About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. 1) It is the same type as the antenna type of antenna specifications. 2) An antenna gain is lower than a gain given in antenna specifications. 3) The emission level is not getting worse. 50-ohm feed line(microstrip line length) Antenna Antenna type 2.4GHz Monopole Antenna 5GHz Monopole Antenna 50-ohm feed line length We test it at 6.15mm as a representative 3. Notice For OEM integration only - device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID:VPYLB1GC or Contains FCC ID:VPYLB1GC Please describe the following warning to the manual. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. When the product is small, as for these words mentioned above, the posting to a manual is possible. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 32 / 38 When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body. RF Exposure requirements are met when installed in mobile equipment. This module cannot be installed in portable equipment without further testing and a change to FCC's grant of authorization. Contact Murata regarding portable applications. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. This device is intended only for OEM integrators under the following conditions: 1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2)The transmitter module may not be co-located with any other transmitter or antenna. 3)The use of an antenna with gain less than 1.2 dBi(2.4GHz) and 2.5 dBi(5GHz). As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID:VPYLB1GC". The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 33 / 38 Type1GC Installation Manual (IC) IC No. of this product is as follows. IC : 772C-LB1GC For OEM integration only - device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by IC on the product and in the Installation manual Notice. Contents 1.Theory of operation 2.Antenna 3.Notice 1. Theory of Operation Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. La transmission des donnees est toujours initiee par le logiciel, puis les donnees sont transmises par 'intermediaire du MAC, par la bande de base numerique et analogique et, enfin, a la puce RF. Plusieurs paquets speciaux sont inities par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numerique active l'emetteur RF, puis desactive celui-ci a la fin du paquet. En consequence, l'emetteur reste uniquement active lors de la transmission d'un des paquets susmentionnes. En d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence d'information a transmettre ou de defaillance. End users cannot modify the software because F/W & driver are installed in device. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 34 / 38 2. Antenna Please refer to KDB 996369 Please perform the antenna design that followed the specifications of the antenna. About the signal line between an antenna and a module It is a 50-ohm line design. Fine tuning of return loss etc. can be performed using a matching network. However, it is required to check "Class1 change" and "Class2 change" which the authorities define then. The concrete contents of a check are the following three points. 1) It is the same type as the antenna type of antenna specifications. 2) An antenna gain is lower than a gain given in antenna specifications. 3) The emission level is not getting worse. 50-ohm feed line(microstrip line length) Antenna Antenna type 2.4GHz Monopole Antenna 5GHz Monopole Antenna 50-ohm feed line length We test it at 6.15mm as a representative 3. Notice For OEM integration only - device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains IC:772C-LB1GC This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : 1) l'appareil ne doit pas produire de brouillage; 2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. When the product is small, as for these words mentioned above, the posting to a manual is possible. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 35 / 38 5150-5250 MHz band is restricted to indoor operation only. La bande 5150-5250 MHz est restreinte a une utilisation a l'interieur seulement. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Les radars de haute puissance sont designes utilisateurs principaux (c.-a-d., qu'ils ont la priorite) pour les bandes 5250-5350 MHz et 5650-5850 MHz, et ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person's body. Cet equipement est conforme aux limites d'exposition aux rayonnements enoncees pour un environnement non controle et respecte les regles d'exposition aux frequences radioelectriques (RF) CNR-102 de l'IC. Cet equipement doit etre installe et utilise en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain. RF Exposure requirements are met when installed in mobile equipment. This module cannot be installed in portable equipment without further testing and a change to FCC's grant of authorization. Contact Murata regarding portable applications. Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 36 / 38 This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. 3)The use of an antenna with gain less than 1.2 dBi(2.4GHz) and 2.5 dBi(5GHz). As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est concu uniquement pour les integrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1)L'antenne doit etre installee de telle sorte qu'une distance de 20 cm est respectee entre l'antenne et les utilisateurs, et 2)Le module emetteur peut ne pas etre coimplante avec un autre emetteur ou antenne. Tant que les 3 conditions ci-dessus sont remplies, des essais supplementaires sur l'emetteur ne seront pas necessaires. Toutefois, l'integrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformite supplementaires requis pour ce module installe. Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. La transmission des donnees est toujours initiee par le logiciel, puis les donnees sont transmises par 'intermediaire du MAC, par la bande de base numerique et analogique et, enfin, a la puce RF. Plusieurs paquets speciaux sont inities par le MAC. Ce sont les seuls moyens pour qu'une partie de la bande de base numerique active l'emetteur RF, puis desactive celui-ci a la fin du paquet. En consequence, l'emetteur reste uniquement active lors de la transmission d'un des paquets susmentionnes. En d'autres termes, ce dispositif interrompt automatiquement toute transmission en cas d'absence d'information a transmettre ou de defaillance. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas ou ces conditions ne peuvent etre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre emetteur), l'autorisation du Canada n'est plus considere comme valide et l'ID IC ne peut pas etre utilise sur le produit final. Dans ces circonstances, l'integrateur OEM sera charge de reevaluer le produit final (y compris l'emetteur) et 'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains IC: 772C-LB1GC". Plaque signaletique du produit final Ce module emetteur est autorise uniquement pour une utilisation dans un dispositif ou l'antenne peut etre installee de telle sorte qu'une distance de 20cm peut etre maintenue entre l'antenne et les utilisateurs. Le produit final doit etre etiquete dans un endroit visible avec l'inscription suivante: "Contient des IC: 772C-LB1GC". Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 37 / 38 Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information a l'utilisateur final L'integrateur OEM doit etre conscient de ne pas fournir des informations a l'utilisateur final quant a la facon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui integre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations reglementaires requises et avertissements comme indique dans ce manuel. Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd. Preliminary Specification Number : SP-UZ1GC-S 38 / 38 For Japan Application Model Name: Type1GC Certification Number: 001-P00975 R 001-P00975 W52/W53 In Japan, W52/W53 is for indoor use only. Classification of Specified Radio Equipment 2 1 19 2.4GHz Radio equipment for Article 2-1-19 of Certification Ordinance 2 1 19 3 5GHz Radio equipment for Article 2-1-19-3 of Certification Ordinance Preliminary < Specification may be changed by Murata without notice > Murata Manufacturing Co., Ltd.