Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents Aluminum Capacitors Axial Long-Life, DIN-Based FEATURES * Long useful life: up to 15 000 h at 85 C * Taped versions up to case O 15 mm x 30 mm available for automatic insertion * Charge and discharge proof * Polarized aluminum electrolytic capacitors, non-solid electrolyte * Axial leads, cylindrical aluminum case, insulated with a blue sleeve * Mounting ring version not available in insulated form * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 042/043 ASH high voltage 138 AML 021 ASM smaller dimensions 132/133 ALL-DIN longer life APPLICATIONS 119 AHT 120 ATC * General industrial, power supplies, telecommunication, EDP * Coupling, decoupling, timing; smoothing, filtering and buffering in SMPS * For use where low mounting height is important * Vibration and shock resistant Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE 6.5 x 18 10 x 18 10 x 30 and and to 8 x 18 10 x 25 21 x 38 1 F to 4700 F -10 % to +50 % 10 V to 160 V -40 C to +85 C 2000 h 2000 h 6000 h 8000 h 8000 h 3000 h 3000 h 10 000 h 15 000 h 15 000 h Nominal case sizes (O D x L in mm) MARKING Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 C Endurance test at 85 C Useful life at 105 C Useful life at 85 C Useful life at 40 C, 160 000 h 240 000 h 240 000 h 1.8 x IR applied Shelf life at 0 V, 85 C 500 h Based on sectional IEC 60384-4/EN130 300 specification Climatic category 40/085/56 IEC 60068 The capacitors are marked (where possible) with the following information: * Rated capacitance (in F) * Tolerance on rated capacitance, code letter in accordance with IEC 60062 (T for -10 % to +50 %) * Rated voltage (in V) * Upper category temperature (85 C) * Date code, in accordance with IEC 60062 * Code for factory of origin * Name of manufacturer * Negative terminal identification * Series number (132 or 133) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) CR (F) 1.0 2.2 4.7 10 22 UR (V) 10 16 25 40 63 100 160 250 - - 6.5 x 18 - - 6.5 x 18 6.5 x 18 8 x 18 - 6.5 x 18 6.5 x 18 - 10 x 25 10 x 30 (1) 10 x 30 (1) 12.5 x 30 (1) - Note For these CV-values see datasheet 041 - 043 ASH (www.vishay.com/doc?28329) (1) Revision: 09-Jan-17 Document Number: 28366 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) CR (F) 47 68 100 150 220 330 470 680 1000 1500 2200 3300 4700 UR (V) 10 12.5 x 30 12.5 x 30 15 x 30 18 x 30 18 x 30 18 x 38 21 x 38 16 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30 10 x 25 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 21 x 38 25 10 x 25 12.5 x 30 12.5 x 30 12.5 x 30 18 x 30 18 x 30 18 x 38 21 x 38 - 40 8 x 18 10 x 18 12.5 x 30 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 21 x 38 - 63 10 x 18 10 x 30 10 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 21 x 38 - 100 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 18 x 38 21 x 38 - 160 15 x 30 (1) 15 x 30 (1) 18 x 30 (1) 18 x 38 (1) 21 x 38 (1) - 250 18 x 30 (1) 18 x 38 (1) 21 x 38 (1) - Note (1) For these CV-values see datasheet 041 - 043 ASH (www.vishay.com/doc?28329) DIMENSIONS in millimeters AND AVAILABLE FORMS 73 1.6 OD L L I Od 33 1 Od OD F F Form BR: Taped on reel Case O D x L = 6.5 mm x 18 mm to 15 mm x 30 mm Form AA: Axial in box Case O D x L = 10 mm x 30 mm to 21 mm x 38 mm Form BA: Taped in box (ammopack) Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm Fig. 2 - Forms BA and BR Fig. 3 - Form AA Table 1 AXIAL; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 21 x 38 AXIAL FORM AA, BA, AND BR CASE CODE Od I O Dmax. Lmax. Fmin. MASS (g) 4 5 6 7 00 01 02 03 04 05 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 55 1 55 1 55 1 55 1 34 1 34 1 6.9 8.5 10.5 10.5 10.5 13.0 15.5 18.5 18.5 21.5 18.5 18.5 18.5 25.5 30.5 30.5 30.5 30.5 39.5 39.5 25 25 25 30 35 35 35 35 44 44 1.3 1.7 2.5 3.3 4.8 7.4 11.7 12.9 19.0 24.0 PACKAGING QUANTITIES FORM FORM FORM AA BA BR 1000 1000 500 500 500 500 500 500 340 500 260 400 200 250 120 125 100 - Note * For detailed tape dimensions, please see www.vishay.com/doc?28361. Revision: 09-Jan-17 Document Number: 28366 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents D 120 C (3 x) 3.6 + 0.2 - 0.2 D3 90 2 (3 x) - L 1.05 + 0.03 (3 x) - 0.1 1.3 + 0 (3 x) - 0.05 d2 1.3 + 0.1 (3 x) 0 Mounting holes + 1.0 - 0.5 O d1 O D2 Case O D x L = 15 mm x 30 mm to 21 mm x 38 mm Case not insulated (insulation on request) Especially for applications with severe shocks and vibrations Fig. 4 - Mounting hole diagram and outline; form MR: with mounting rings and pins Table 2 MOUNTING RING; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES NOMINAL CASE SIZE ODxL CASE CODE MOUNTING RING: FORM MR o d1 O d2 O Dmax. O D2max. D3 Lmax. 15 x 30 02 0.8 1.0 + 0.4 15.5 17.5 16.5 0.2 18 x 30 03 0.8 1.0 + 0.4 18.5 19.5 18 x 38 04 0.8 1.0 + 0.4 18.5 21 x 38 05 0.8 1.0 + 0.4 21.5 PACKAGING QUANTITIES 33 11.7 200 18.5 0.2 33 12.9 240 19.5 18.5 0.2 42 19.0 100 22.5 21.5 0.2 42 24.0 100 ORDERING EXAMPLE ELECTRICAL DATA SYMBOL MASS (g) DESCRIPTION Electrolytic capacitor 132 series 100 F/40 V; -10 %/+50 % CR Rated capacitance at 100 Hz, tolerance -10 %/+50 % Nominal case size: O 10 mm x 18 mm; form BR IR Rated RMS ripple current at 100 Hz, 85 C Ordering code: MAL213227101E3 Former 12NC: 2222 132 27101 IL5 Max. leakage current after 5 min at UR tan Max. dissipation factor at 100 Hz ESR Equivalent series resistance at 100 Hz (calculated from tan max. and CR) Z Max. impedance at 10 kHz Note * Unless otherwise specified, all electrical values in Table 3 apply at Tamb = 20 C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Revision: 09-Jan-17 Document Number: 28366 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents Table 3 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 10 16 25 40 63 IR NOMINAL IL5 ESR Z Z CR CASE SIZE 100 Hz tan 100 Hz 5 min 100 Hz 10 kHz 100 kHz 85 C ODxL 100 Hz (F) (A) () () () (mA) (mm) 470 680 1000 1500 2200 3300 4700 47 100 220 330 330 470 470 680 1000 1500 2200 3300 4700 22 220 220 330 470 680 1000 1500 2200 47 100 150 150 220 330 470 680 1000 1500 2200 4.7 10 22 47 68 68 100 150 220 330 470 680 1000 12.5 x 30 12.5 x 30 15 x 30 18 x 30 18 x 30 18 x 38 21 x 38 6.5 x 18 8 x 18 10 x 18 10 x 25 12.5 x 30 10 x 25 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 21 x 38 6.5 x 18 10 x 25 12.5 x 30 12.5 x 30 12.5 x 30 18 x 30 18 x 30 18 x 38 21 x 38 8 x 18 10 x 18 10 x 25 12.5 x 30 12.5 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 21 x 38 6.5 x 18 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 10 x 30 15 x 30 15 x 30 18 x 30 18 x 38 21 x 38 21 x 38 Revision: 09-Jan-17 350 460 640 800 1100 1300 1800 95 150 250 320 320 450 450 550 780 950 1300 1600 2300 60 340 340 410 560 700 1000 1100 1850 120 210 310 310 410 550 700 900 1200 1500 1900 38 64 100 170 210 210 300 350 520 600 970 1000 1600 9.4 13.6 20 30 44 66 94 5.5 7.2 11 14.6 10.6 19 15 22 32 48 70 110 150 5.1 15 11 16.5 24 34 50 75 110 7.8 12 16 12 17.5 26 38 54 80 120 180 4.6 5.3 6.8 9.9 12.6 8.6 12.6 19 28 42 59 86 130 0.18 0.18 0.18 0.22 0.22 0.27 0.27 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.15 0.15 0.15 0.15 0.11 0.11 0.11 0.11 0.11 0.11 0.11 0.12 0.13 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.09 0.10 0.10 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.61 0.42 0.28 0.23 0.16 0.13 0.09 4.7 2.2 1.0 0.67 0.67 0.47 0.47 0.33 0.22 0.16 0.11 0.07 0.05 8.0 0.80 0.80 0.53 0.37 0.26 0.17 0.13 0.09 3.0 1.4 0.95 0.95 0.65 0.43 0.30 0.21 0.14 0.10 0.07 24 11 5.1 2.4 1.6 1.6 1.1 0.74 0.50 0.34 0.24 0.16 0.11 0.26 0.20 0.12 0.10 0.09 0.05 0.05 2.6 1.2 0.55 0.36 0.36 0.26 0.26 0.14 0.12 0.10 0.06 0.05 0.05 4.1 0.40 0.40 0.30 0.20 0.10 0.10 0.06 0.05 1.6 0.75 0.50 0.50 0.34 0.20 0.16 0.10 0.08 0.06 0.05 12 5.5 2.5 1.2 0.81 0.80 0.60 0.37 0.25 0.15 0.12 0.08 0.06 0.60 0.40 2.2 1.1 0.55 0.36 0.60 0.26 0.40 2.9 0.40 0.60 0.40 1.4 0.75 0.50 0.60 0.40 5.0 3.3 2.1 1.2 0.60 0.60 0.40 - ORDERING CODE MAL2....... IN BOX FORM AA 13214471E3 13214681E3 13214102E3 13214152E3 13214222E3 13214332E3 13214472E3 13215331E3 13215471E3 13215681E3 13215102E3 13215152E3 13215222E3 13215332E3 13215472E3 13216221E3 13216331E3 13216471E3 13216681E3 13216102E3 13216152E3 13216222E3 13217151E3 13217221E3 13217331E3 13217471E3 13217681E3 13217102E3 13217152E3 13217222E3 13218689E3 13218101E3 13218151E3 13218221E3 13218331E3 13218471E3 13218681E3 13218102E3 TAPED ON REEL FORM BR 13224471E3 13224681E3 13224102E3 13225479E3 13225101E3 13225221E3 13290508E3 13225331E3 13290507E3 13225471E3 13225681E3 13225102E3 13226229E3 13290503E3 13226221E3 13226331E3 13226471E3 13227479E3 13227101E3 13290511E3 13227151E3 13227221E3 13227331E3 13227471E3 13228478E3 13228109E3 13228229E3 13228479E3 13290513E3 13228689E3 13228101E3 13228151E3 13228221E3 - TAPED IN BOX FORM BA 13235479E3 13235101E3 13235221E3 13290509E3 13290502E3 13236229E3 13290504E3 13237479E3 13237101E3 13290512E3 13238478E3 13238109E3 13238229E3 13238479E3 13290514E3 - MOUNTING RING FORM MR 13244102E3 13244152E3 13244222E3 13244332E3 13244472E3 13245681E3 13245102E3 13245152E3 13245222E3 13245332E3 13245472E3 13246681E3 13246102E3 13246152E3 13246222E3 13247331E3 13247471E3 13247681E3 13247102E3 13247152E3 13247222E3 13248151E3 13248221E3 13248331E3 13248471E3 13248681E3 13248102E3 Document Number: 28366 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 100 160 IR NOMINAL IL5 ESR Z Z CR CASE SIZE 100 Hz tan 100 Hz 5 min 100 Hz 10 kHz 100 kHz 85 C ODxL 100 Hz (F) (A) () () () (mA) (mm) 1.0 4.7 47 47 68 100 150 220 330 470 22 6.5 x 18 6.5 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 18 x 38 21 x 38 10 x 25 20 48 220 220 250 380 400 660 700 1200 120 4.0 4.9 13.4 9.4 13.5 20 30 44 66 94 20 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.10 95 20 2.0 2.0 1.4 0.95 0.64 0.43 0.29 0.20 7.2 45 9.6 1.0 1.0 0.80 0.50 0.35 0.20 0.15 0.10 5.5 6.0 4.0 0.90 0.90 2.5 ORDERING CODE MAL2....... IN BOX FORM AA TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 13219479E3 13219689E3 13219101E3 13219151E3 13219221E3 13219331E3 13219471E3 - 13229108E3 13229478E3 13290505E3 13229479E3 13229689E3 13229101E3 13390502E3 13239108E3 13239478E3 13290506E3 13390503E3 13249101E3 13249151E3 13249221E3 13249331E3 13249471E3 - ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current Leakage current CONDITIONS UR = 10 V to 160 V VALUE AXIAL MOUNTING RING Us 1.15 x UR Urev 1 V After 1 min: case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm: UR = 10 V to 100 V UR = 160 V case O D x L = 10 mm x 30 mm to 21 mm x 38 mm: UR = 10 V to 100 V After 5 min: case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm: UR = 10 V to 100 V UR = 160 V case O D x L = 10 mm x 30 mm to 21 mm x 38 mm: UR = 10 V to 100 V IL1 0.01 CR x UR + 3 A IL1 50 A IL1 0.006 CR x UR + 3 A IL5 0.002 CR x UR + 4 A IL5 20 A IL5 0.002 CR x UR + 4 A Inductance Equivalent series inductance (ESL) Revision: 09-Jan-17 Case O D x L mm: 6.5 x 18 8 x 18 10 x 18 10 x 25 10 x 30 12.5 x 30 15 x 30 18 x 30 18 x 38 21 x 38 Typ. 15 nH Typ. 35 nH Typ. 69 nH Typ. 38 nH Typ. 38 nH Typ. 46 nH Typ. 48 nH Typ. 50 nH Typ. 54 nH Typ. 59 nH Typ. 39 nH Typ. 39 nH Typ. 39 nH Typ. 39 nH Document Number: 28366 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents CAPACITANCE (C) 1.10 C C0 1.05 1 1.05 C C0 1.00 3 2 0.95 2 0.90 3 1.00 0.95 2 0.85 3 Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 0.90 1 1 Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 0.80 0.85 0.75 0 - 40 C0 = Capacitance at 20 C, 100 Hz 80 40 Tamb (C) 10 102 C0 = Capacitance at 20 C, 100 Hz Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature at 10 kHz 103 104 f (Hz) Fig. 6 - Typical multiplier of capacitance as a function of frequency DISSIPATION FACTOR (tan ) 10 10 Curve 1: 16 V Curve 2: 100 V tan 1 Curve 1: 16 V Curve 2: 100 V tan 1 1 2 10-1 10 -1 1 2 10-2 10 -2 - 60 - 40 - 20 0 20 40 60 80 100 Tamb (C) f = 100 Hz Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm 10 2 10 103 f (Hz) 104 Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm Fig. 7 - Typical tan as a function of ambient temperature Fig. 8 - Typical tan as a function of frequency IMPEDANCE (Z) 10 3 102 Z () Z () Curve 1: 47 F, 100 V Curve 2: 47 F, 16 V Curve 3: 150 F, 16 V Curve 4: 220 F, 16 V Curve 5: 470 F, 16 V 1 10 2 10 1 2 10 1 3 2 3 4 Curve 1: 47 F, 100 V Curve 2: 47 F, 16 V Curve 3: 150 F, 16 V Curve 4: 220 F, 16 V Curve 5: 470 F, 16 V 10-1 - 40 - 20 0 10-1 20 40 Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm 60 80 100 Tamb (C) f = 10 Hz Fig. 9 - Typical impedance as a function of ambient temperature Revision: 09-Jan-17 5 5 10-2 - 60 4 1 10 2 103 104 Case O D x L = 6.5 mm x 18 mm to 10 mm x 25 mm 105 f (Hz) 10 6 Tamb (C) Fig. 10 - Typical impedance as a function of frequency Document Number: 28366 6 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 4 ENDURANCE TEST DURATION AND USEFUL LIFE NOMINAL CASE SIZE ODxL (mm) ENDURANCE AT 85 C (h) USEFUL LIFE AT 85 C (h) 6.5 x 18 6000 10 000 8 x 18 6000 10 000 10 x 18 6000 10 000 10 x 25 6000 10 000 10 x 30 8000 15 000 12.5 x 30 8000 15 000 15 x 30 8000 15 000 18 x 30 8000 15 000 18 x 38 8000 15 000 21 x 38 8000 15 000 Note * Multiplier of useful life code: CCC205 CCC205 3.3 IA 3.2 IR 3.1 3.0 2.8 2.6 2.4 Lifetime multiplier 2.2 0 1. 5 1. 2.0 0 2. 0 3. 1.8 0 4. 6 1.6 .0 15 70 0.5 0.0 (1) 30 1.0 0.8 Useful life at 85 C and IR applied: Case O D x L = 6.5 mm x 18 mm to 8 mm x 18 mm: 10 000 h Case O D x L = 10 mm x 18 mm to 21 mm x 38 mm: 15 000 h 20 (1) 50 1.2 10 1.4 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 85 C 40 50 60 70 80 90 100 T amb ( C) Fig. 11 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 09-Jan-17 Document Number: 28366 7 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: 041-043ASH or 138 AML 132/133 ALL-DIN www.vishay.com Vishay BCcomponents Table 5 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) UR (V) 50 100 300 1000 3000 10 000 IR MULTIPLIER 10 0.95 1.00 1.07 1.12 1.15 1.20 16 0.95 1.00 1.07 1.12 1.15 1.20 25 0.90 1.00 1.12 1.20 1.25 1.30 40 0.90 1.00 1.12 1.20 1.25 1.30 63 0.90 1.00 1.12 1.20 1.25 1.30 100 0.85 1.00 1.20 1.30 1.35 1.40 160 0.85 1.00 1.20 1.30 1.35 1.40 250 0.85 1.00 1.20 1.30 1.35 1.40 Table 6 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) Revision: 09-Jan-17 REFERENCE PROCEDURE (quick reference) IEC 60384-4/ EN 130300 subclause 4.13 Tamb = 85 C; UR applied; Case O D x L = 6.5 mm x 18 mm to 8 mm x 18 mm: 6000 h; Case O D x L = 10 mm x 18 mm to 2 1 mm x 38 mm: 8000 h CECC 30301 subclause 1.8.1 Tamb = 85 C; UR and IR applied; Case O D x L = 6.5 mm x 18 mm to 8 mm x 18 mm: 10 000 h; Case O D x L = 10 mm x 18 mm to 21 mm x 38 mm: 15 000 h IEC 60384-4/ EN 130300 subclause 4.17 Tamb = 85 C; no voltage applied; 500 h; After test: UR to be applied for 30 min, 24 h to 48 h before measurement REQUIREMENTS UR = 10 V to 160 V; C/C: 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit UR = 10 V to 160 V; C/C: 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit total failure percentage: 1 % C/C, tan , Z: for requirements see "Endurance test" above IL5 2 x spec. limit Document Number: 28366 8 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 2222-132-17681 2222-132-27101 MAL213227101E3