Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE series P6KE Series RoHS Description Bi-directional The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25C unless otherwise noted) Parameter Symbol Value Unit PPPM 600 W PD 5.0 W IFSM 100 A VF 3.5/5.0 V TJ , TSTG -55 to 175 C Typical Thermal Resistance Junction to Lead RuJL 20 C/W Typical Thermal Resistance Junction to Ambient RuJA 75 C/W Peak Pulse Power Dissipation by 10x1000s Test Waveform (Fig.2) (Note 1) Steady State Power Dissipation on Inifinite Heat Sink at TL=75C (Fig. 6) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 3) Operating Junction and Storage Temperature Range Applications Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25C per Fig. 2. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. _ 200V and VF< 5.0V for devices of VBR > _ 201V. 3. VF<3.5V for devices of VBR < Functional Diagram Bi-directional Cathode Anode Uni-directional (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/04/13 TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. P6KE Series Agency Approvals AGENCY * ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) VBR = 0.1% x VBR@25C x T * EFT protection of data lines in accordance with * Glass passivated chip IEC 61000-4-4 (IEC801-4) junction in DO-15 Package * Low incremental surge * 600W peak pulse resistance capability at 10x1000s waveform, repetition rate * Typical I less than 1A R (duty cycles):0.01% above 13V * Fast response time: * High temperature typically less than 1.0ps soldering guaranteed: from 0 Volts to BV min 260C/40 seconds / 0.375",(9.5mm) lead * Excellent clamping length, 5 lbs., (2.3kg) capability tension * Typical failure mode is * Plastic package has short from over-specified underwriters laboratory voltage or current flammability classification * Whisker test is conducted 94V-O based on JEDEC JESD201A per its table 4a * Matte tin lead-free plated and 4c * Halogen free and RoHS * IEC-61000-4-2 ESD compliant 15kV(Air), 8kV (Contact) * Typical maximum temperature coefficient Uni-directional Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE series Electrical Characteristics.(TA=25C unless otherwise noted) Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) P6KE6.8A P6KE7.5A P6KE8.2A P6KE9.1A P6KE10A P6KE11A P6KE12A P6KE13A P6KE15A P6KE16A P6KE18A P6KE20A P6KE22A P6KE24A P6KE27A P6KE30A P6KE33A P6KE36A P6KE39A P6KE43A P6KE47A P6KE51A P6KE56A P6KE62A P6KE68A P6KE75A P6KE82A P6KE91A P6KE100A P6KE110A P6KE120A P6KE130A P6KE150A P6KE160A P6KE170A P6KE180A P6KE200A P6KE220A P6KE250A P6KE300A P6KE350A P6KE400A P6KE440A P6KE480A P6KE510A P6KE530A P6KE540A P6KE550A P6KE600A P6KE6.8CA P6KE7.5CA P6KE8.2CA P6KE9.1CA P6KE10CA P6KE11CA P6KE12CA P6KE13CA P6KE15CA P6KE16CA P6KE18CA P6KE20CA P6KE22CA P6KE24CA P6KE27CA P6KE30CA P6KE33CA P6KE36CA P6KE39CA P6KE43CA P6KE47CA P6KE51CA P6KE56CA P6KE62CA P6KE68CA P6KE75CA P6KE82CA P6KE91CA P6KE100CA P6KE110CA P6KE120CA P6KE130CA P6KE150CA P6KE160CA P6KE170CA P6KE180CA P6KE200CA P6KE220CA P6KE250CA P6KE300CA P6KE350CA P6KE400CA P6KE440CA P6KE480CA P6KE510CA P6KE530CA P6KE540CA P6KE550CA P6KE600CA 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 477.00 486.00 495.00 512.00 Breakdown Voltage VBR (Volts) @ IT MIN MAX Test Current IT (mA) 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 570.00 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 630.00 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage VC @ Ipp (V) Maximum Peak Pulse Current Ipp (A) Maximum Reverse Leakage IR@ VR (A) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 828.0 58.1 54.0 50.4 45.5 42.1 39.1 36.5 33.5 28.8 27.1 24.2 22.0 19.9 18.4 16.3 14.7 13.3 12.2 11.3 10.3 9.4 8.7 7.9 7.2 6.6 5.9 5.4 4.9 4.5 4.0 3.7 3.4 2.9 2.8 2.6 2.5 2.2 1.9 1.8 1.5 1.3 1.1 1.0 0.9 0.9 0.8 0.8 0.8 0.75 1000 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X For bidirectional type having VR of 10 volts and less, the IR limit is double. For parts without A , the VBR is 10% and VC is 5% higher than with A parts (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/04/13 Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE series I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR IR VF IT IT IR Vc VBR VR V IR IT VR VBR Vc V Ipp Ipp P6KE Series PPPM Peak Pulse Power Dissipation -- Max power dissipation VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation VBR Breakdown Voltage -- Maximum current that flows though the TVS at a specified test current (IT) VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) IR Reverse Leakage Current -- Current measured at VR VF Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (TA=25C unless otherwise noted) Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating PPPM-Peak Pulse Power (KW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS 100 10 1 0.1 0.001 Time 0.01 0.1 1 td-Pulse Width (ms) 10 continues on next page. (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/04/13 Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE series Ratings and Characteristic Curves (TA=25C unless otherwise noted) (Continued) Figure 3 - Pulse Derating Curve Figure 4 - Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage, % 100 75 50 25 tr=10sec Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 10/1000sec. Waveform as defined by R.E.A 0 0 25 50 75 100 125 150 0 175 200 td 1.0 0 TA- Ambient Temperature (oC) 2.0 3.0 4.0 t-Time (ms) Figure 5 - Typical Junction Capacitance Uni-Directional Figure 6 - Steady State Power Derating Curve 10000 6 Steady State Power Dissipation (W) Bi-directional V=0V Uni-directional V=0V 1000 Uni-directional @VR Cj (pF) TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 100 Bi-directional @VR 10 Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) 5 4 3 2 L = 0.375" (9.5mm) Lead Lengths 1 0 0 25 50 75 100 125 150 175 200 TL-Lead Temperature(C) Figure 7 - Maximum Non-Repetitive Forward Surge Current IFSM - Peak Forward Surge Current (A) 120 100 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/04/13 Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE series Soldering Parameters Lead-free assembly Pre Heat 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow tL Ts(max) Ramp-down Ts(min) ts Preheat 25C - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds t 25C to Peak Time (t) Peak Temperature (TP) 260+0/-5 C Time within 5C of actual peak Temperature (tp) 20 - 40 seconds Flow/Wave Soldering (Solder Dipping) Ramp-down Rate 6C/second max Peak Temperature : 265C Time 25C to peak Temperature (TP) 8 minutes Max. Dipping Time : 10 seconds Do not exceed 280C Soldering : 1 time Physical Specifications Critical Zone TL to TP P6KE Series - Temperature Min (Ts(min)) tp TP Temperature (T) Reflow Condition Environmental Specifications Weight 0.015oz., 0.4g Temperature Cycle JESD22-A104 Case JEDEC DO-204AC (DO-15) molded plastic body over passivated junction. Pressure Cooker JESD 22-A102 Polarity Color band denotes the cathode except Bipolar. High Temp. Storage JESD22-A103 Matte Tin axial leads, solderable per JESD22-B102D. HTRB JESD22-A108 Terminal Thermal Shock JESD22-A106 Dimensions D C A B DO-204AC (DO-15) (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/04/13 A Dimensions A Inches Millimeters Min Max Min Max 1.000 - 25.40 - B 0.230 0.300 5.80 7.60 C 0.022 0.034 0.56 0.86 D 0.104 0.140 2.60 3.60 Transient Voltage Suppression Diodes Axial Leaded - 600W > P6KE series Part Numbering System Part Marking System OPTION CODE: BLANK Reel Tape -B Bulk Packaging Cathode Band TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) F P6KE xxx XX X YYWW Littelfuse Logo VBR VOLTAGE CODE (Refer to the Electrical Characteristics table) Trace Code Marking YY:Year Code WW: Week Code P6KEXXX Product Type SERIES CODE Packaging Component Package Quantity Packaging Option P6KExxxXX DO-204AC 4000 Tape & Reel P6KExxxXX-B DO-204AC 1000 BULK Part Number Packaging Specification EIA STD RS-296E Littelfuse Concord Packing Spec. DM-0016 Tape and Reel Specification Off Center either side 2.062+/- 0.059 (52.37+/- 1.5) 0.039(1.0) 2.56 (65.00) 0.048 (1.22) 0.20+/-0.020 (5.08+/- 0.508) 13.0 (330.2) 0.25 (6.35) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) Direction of Feed (c) 2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/04/13