WLA Series Work Light General-Purpose LED Work Light For the latest technical information about this product, including specifications, dimensions, and wiring, see www.bannerengineering.com. * * * * * * * High power solid state LED array in white and color models Illuminates a large area with an even pattern of light and no shadows Designed for area and machine lighting Rugged thermoplastic housing rated to IP69K Lensed models provide a concentrated, more intense, beam pattern Available in four sizes Cabled and quick-disconnect models available Lensed models shown at left; non-lensed models shown at right Models Lensed Models (xx)1 * 11 = 11 lenses * 22 = 22 lenses * 30 = 30 lenses Housing Length "L1"2 WLAW105X180Q WLAW105X180LxxQ 105 mm WLAW190X180Q WLAW190X180LxxQ 190 mm WLAW275X180Q WLAW275X180LxxQ 275 mm WLAW360X180Q WLAW360X180LxxQ 360 mm Non-Lensed Models1 Connection3 LED Color Environmental Rating Input Voltage 4-pin Euro integral QD connector Cool white IP69K 12 to 30V dc Specifications Supply Voltage and Current 12 to 30V dc (10% max. ripple) Use only with suitable Class 2 power supply. Max current per length: Light Length 12V dc 24V dc 30V dc Watts 105 mm 0.8A 0.4A 0.32A 9.6 190 mm 1.6A 0.8A 0.64A 19.2 275 mm 2.4A 1.2A 0.96A 28.8 360 mm 3.2A 1.6A 1.28A 38.4 1 Additional color and window options listed in the model key. 2 See Dimensions on page 3. 3 Integral QD models only are listed. For integral 2 m (6.5' ft PVC cable, omit suffix Q from model number (example, WLAW105X180). A model with a QD requires a mating cordset (see Cordsets on page 4). P/N 155425 Rev. D 5/1/2013 0 155425 0 WLA Series Work Light Lumens and Lux Lumens4 Light Length Cool White Warm White Green Red Yellow Blue 105 mm 550 435 325 125 275 95 190 mm 1100 870 650 250 550 190 275 mm 1650 1305 975 375 825 285 360 mm 2200 1740 1300 500 1100 380 Light Length Non Lensed Models Max Lux4 at 1m L11 Lensed Models Max Lux4 at 1m Cool White Warm White Green Red Yellow Blue Cool White Warm White Green Red Yellow Blue 105 mm 215 170 115 55 110 30 2865 2290 2910 1375 1795 815 190 mm 430 340 230 110 220 60 5140 4110 4990 2605 3360 1385 275 mm 645 510 345 165 330 90 7565 6050 6400 3345 4705 1760 360 mm 860 680 460 220 440 120 8875 7100 7405 3730 5605 2030 Light Length L22 Lensed Models Max Lux4 at 1m L30 Lensed Models Max Lux4 at 1m Cool White Warm White Green Red Yellow Blue Cool White Warm White Green Red Yellow Blue 105 mm 1110 880 1125 530 695 315 760 600 770 365 475 215 190 mm 2155 1705 2090 1090 1410 580 1500 1185 1450 760 980 405 275 mm 3160 2500 2675 1400 1965 735 2210 1745 1870 975 1375 515 360 mm 4160 3290 3470 1750 2625 950 2890 2285 2410 1215 1825 660 Light Characteristics Cool White: 5300 - 7000K Warm White: 2600 - 4300K Green: 520 - 535 nm Red: 620 - 630 nm Yellow: 585 - 595 nm Blue: 460 - 475 nm Environmental Rating Rated IEC IP67 and IP69K, per DIN 40050 Connections Integral 4-pin Euro style QD, or 2 m (6.5 ft) integral cable Operating Temperature -20 to +50 C (-4 to +122 F) Construction PBT housing; acrylic window; nickel-plated brass connector or PVC-jacketed cable Mounting When mounting light to combustible or insulating surfaces, a minimum of 1 inch of clearance around all sides is required. Use supplied standoffs or alternative mounting method to achieve spacing. Accessory bracket available. Storage Temperature -40 to +70 C (-40 to +158 F) Vibration and Mechanical Shock All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine wave. Certifications NOTE: Do not spray cable with high-pressure sprayer, or cable damage will result. 4 Lumen and lux values are typical when operating at 25 C ambient. Values lowered by 35% on diffused windows models. 2 www.bannerengineering.com - tel: 763-544-3164 P/N 155425 Rev. D WLA Series Work Light Beam Pattern Percentage of Maximum Light Intensity for Lensed and Nonlensed Models at 1 Meter (Typical) Perce ntage of Max Light Intensity (Lux %) 100% 75% 50% 25% L22 L11 0% -100 -80 -60 -40 -20 0 20 L30 40 60 Non-Lensed 80 100 Light Pattern from Center (cm) Dimensions L2 L1 Model L1 L2 WLAW105X.. 105.1 mm (4.14 in) 92.8 mm (3.66 in) WLAW190X.. 180.1 mm (7.09 in) 167.8 mm (6.61 in) WLAW275X.. 272.7 mm (10.74 in) 260.3 mm (10.25 in) WLAW360X.. 356.6 mm (14.04 in) 344.3 mm (13.55 in) Wiring Female 1 1 Wiring Key: 1 = Brown 3 = Blue 3 1 = Brown Male 3 = Blue 12 - 30V dc 3 1 3 P/N 155425 Rev. D www.bannerengineering.com - tel: 763-544-3164 3 WLA Series Work Light Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) Style Dimensions Pinout 44 Typ. 1 Straight M12 x 1 o 14.5 32 Typ. [1.26"] 30 Typ. [1.18"] Right-Angle 4 2 3 1 = Brown 2 = White 3 = Blue 4 = Black M12 x 1 o 14.5 [0.57"] Accessory Brackets SMBBSSM * 316 stainless steel bracket and hardware * Includes 2 brackets; four M5 socket drive, button head screws to attach to light SMBBSRA * 316 stainless steel bracket and hardware * Right-angle swivel bracket for versatile orientation SMBWLAMAG * Magnetic mounting bracket for easy attachment to steel surfaces * SMBWLAMAGR protective cover also available to prevent scratches to painted surfaces Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. www.bannerengineering.com - tel: 763-544-3164